cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

lite5200b.dts (3191B)

      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * Lite5200B board Device Tree Source
      4 *
      5 * Copyright 2006-2007 Secret Lab Technologies Ltd.
      6 * Grant Likely <grant.likely@secretlab.ca>
      7 */
      8
      9/include/ "mpc5200b.dtsi"
     10
     11&gpt0 { fsl,has-wdt; };
     12&gpt2 { gpio-controller; };
     13&gpt3 { gpio-controller; };
     14
     15/ {
     16	model = "fsl,lite5200b";
     17	compatible = "fsl,lite5200b";
     18
     19	leds {
     20		compatible = "gpio-leds";
     21		tmr2 {
     22			gpios = <&gpt2 0 1>;
     23		};
     24		tmr3 {
     25			gpios = <&gpt3 0 1>;
     26			linux,default-trigger = "heartbeat";
     27		};
     28		led1 { gpios = <&gpio_wkup 2 1>; };
     29		led2 { gpios = <&gpio_simple 3 1>; };
     30		led3 { gpios = <&gpio_wkup 3 1>; };
     31		led4 { gpios = <&gpio_simple 2 1>; };
     32	};
     33
     34	memory@0 {
     35		reg = <0x00000000 0x10000000>;	// 256MB
     36	};
     37
     38	soc5200@f0000000 {
     39		psc@2000 {		// PSC1
     40			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
     41			cell-index = <0>;
     42		};
     43
     44		psc@2200 {		// PSC2
     45			status = "disabled";
     46		};
     47
     48		psc@2400 {		// PSC3
     49			status = "disabled";
     50		};
     51
     52		psc@2600 {		// PSC4
     53			status = "disabled";
     54		};
     55
     56		psc@2800 {		// PSC5
     57			status = "disabled";
     58		};
     59
     60		psc@2c00 {		// PSC6
     61			status = "disabled";
     62		};
     63
     64		// PSC2 in ac97 mode example
     65		//ac97@2200 {		// PSC2
     66		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
     67		//	cell-index = <1>;
     68		//};
     69
     70		// PSC3 in CODEC mode example
     71		//i2s@2400 {		// PSC3
     72		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
     73		//	cell-index = <2>;
     74		//};
     75
     76		// PSC6 in spi mode example
     77		//spi@2c00 {		// PSC6
     78		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
     79		//	cell-index = <5>;
     80		//};
     81
     82		ethernet@3000 {
     83			phy-handle = <&phy0>;
     84		};
     85
     86		mdio@3000 {
     87			phy0: ethernet-phy@0 {
     88				reg = <0>;
     89			};
     90		};
     91
     92		i2c@3d40 {
     93			eeprom@50 {
     94				compatible = "atmel,24c02";
     95				reg = <0x50>;
     96			};
     97		};
     98
     99		sram@8000 {
    100			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
    101			reg = <0x8000 0x4000>;
    102		};
    103	};
    104
    105	pci@f0000d00 {
    106		interrupt-map-mask = <0xf800 0 0 7>;
    107		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
    108				 0xc000 0 0 2 &mpc5200_pic 1 1 3
    109				 0xc000 0 0 3 &mpc5200_pic 1 2 3
    110				 0xc000 0 0 4 &mpc5200_pic 1 3 3
    111
    112				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
    113				 0xc800 0 0 2 &mpc5200_pic 1 2 3
    114				 0xc800 0 0 3 &mpc5200_pic 1 3 3
    115				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
    116		clock-frequency = <0>; // From boot loader
    117		interrupts = <2 8 0 2 9 0 2 10 0>;
    118		bus-range = <0 0>;
    119		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
    120			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
    121			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
    122	};
    123
    124	localbus {
    125		ranges = <0 0 0xfe000000 0x02000000>;
    126
    127		flash@0,0 {
    128			compatible = "cfi-flash";
    129			reg = <0 0 0x02000000>;
    130			bank-width = <1>;
    131			#size-cells = <1>;
    132			#address-cells = <1>;
    133
    134			partition@0 {
    135				label = "kernel";
    136				reg = <0x00000000 0x00200000>;
    137			};
    138			partition@200000 {
    139				label = "rootfs";
    140				reg = <0x00200000 0x01d00000>;
    141			};
    142			partition@1f00000 {
    143				label = "u-boot";
    144				reg = <0x01f00000 0x00060000>;
    145			};
    146			partition@1f60000 {
    147				label = "u-boot-env";
    148				reg = <0x01f60000 0x00020000>;
    149			};
    150			partition@1f80000 {
    151				label = "dtb";
    152				reg = <0x01f80000 0x00080000>;
    153			};
    154		};
    155	};
    156
    157};