mpc8308rdb.dts (6642B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * MPC8308RDB Device Tree Source 4 * 5 * Copyright 2009 Freescale Semiconductor Inc. 6 * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com 7 */ 8 9/dts-v1/; 10 11/ { 12 compatible = "fsl,mpc8308rdb"; 13 #address-cells = <1>; 14 #size-cells = <1>; 15 16 aliases { 17 ethernet0 = &enet0; 18 ethernet1 = &enet1; 19 serial0 = &serial0; 20 serial1 = &serial1; 21 pci0 = &pci0; 22 }; 23 24 cpus { 25 #address-cells = <1>; 26 #size-cells = <0>; 27 28 PowerPC,8308@0 { 29 device_type = "cpu"; 30 reg = <0x0>; 31 d-cache-line-size = <32>; 32 i-cache-line-size = <32>; 33 d-cache-size = <16384>; 34 i-cache-size = <16384>; 35 timebase-frequency = <0>; // from bootloader 36 bus-frequency = <0>; // from bootloader 37 clock-frequency = <0>; // from bootloader 38 }; 39 }; 40 41 memory { 42 device_type = "memory"; 43 reg = <0x00000000 0x08000000>; // 128MB at 0 44 }; 45 46 localbus@e0005000 { 47 #address-cells = <2>; 48 #size-cells = <1>; 49 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; 50 reg = <0xe0005000 0x1000>; 51 interrupts = <77 0x8>; 52 interrupt-parent = <&ipic>; 53 54 // CS0 and CS1 are swapped when 55 // booting from nand, but the 56 // addresses are the same. 57 ranges = <0x0 0x0 0xfe000000 0x00800000 58 0x1 0x0 0xe0600000 0x00002000 59 0x2 0x0 0xf0000000 0x00020000 60 0x3 0x0 0xfa000000 0x00008000>; 61 62 flash@0,0 { 63 #address-cells = <1>; 64 #size-cells = <1>; 65 compatible = "cfi-flash"; 66 reg = <0x0 0x0 0x800000>; 67 bank-width = <2>; 68 device-width = <1>; 69 70 u-boot@0 { 71 reg = <0x0 0x60000>; 72 read-only; 73 }; 74 env@60000 { 75 reg = <0x60000 0x10000>; 76 }; 77 env1@70000 { 78 reg = <0x70000 0x10000>; 79 }; 80 kernel@80000 { 81 reg = <0x80000 0x200000>; 82 }; 83 dtb@280000 { 84 reg = <0x280000 0x10000>; 85 }; 86 ramdisk@290000 { 87 reg = <0x290000 0x570000>; 88 }; 89 }; 90 91 nand@1,0 { 92 #address-cells = <1>; 93 #size-cells = <1>; 94 compatible = "fsl,mpc8315-fcm-nand", 95 "fsl,elbc-fcm-nand"; 96 reg = <0x1 0x0 0x2000>; 97 98 jffs2@0 { 99 reg = <0x0 0x2000000>; 100 }; 101 }; 102 }; 103 104 immr@e0000000 { 105 #address-cells = <1>; 106 #size-cells = <1>; 107 device_type = "soc"; 108 compatible = "fsl,mpc8308-immr", "simple-bus"; 109 ranges = <0 0xe0000000 0x00100000>; 110 reg = <0xe0000000 0x00000200>; 111 bus-frequency = <0>; 112 113 i2c@3000 { 114 #address-cells = <1>; 115 #size-cells = <0>; 116 cell-index = <0>; 117 compatible = "fsl-i2c"; 118 reg = <0x3000 0x100>; 119 interrupts = <14 0x8>; 120 interrupt-parent = <&ipic>; 121 dfsrr; 122 rtc@68 { 123 compatible = "dallas,ds1339"; 124 reg = <0x68>; 125 }; 126 }; 127 128 usb@23000 { 129 compatible = "fsl-usb2-dr"; 130 reg = <0x23000 0x1000>; 131 #address-cells = <1>; 132 #size-cells = <0>; 133 interrupt-parent = <&ipic>; 134 interrupts = <38 0x8>; 135 dr_mode = "peripheral"; 136 phy_type = "ulpi"; 137 }; 138 139 enet0: ethernet@24000 { 140 #address-cells = <1>; 141 #size-cells = <1>; 142 ranges = <0x0 0x24000 0x1000>; 143 144 cell-index = <0>; 145 device_type = "network"; 146 model = "eTSEC"; 147 compatible = "gianfar"; 148 reg = <0x24000 0x1000>; 149 local-mac-address = [ 00 00 00 00 00 00 ]; 150 interrupts = <32 0x8 33 0x8 34 0x8>; 151 interrupt-parent = <&ipic>; 152 tbi-handle = < &tbi0 >; 153 phy-handle = < &phy2 >; 154 fsl,magic-packet; 155 156 mdio@520 { 157 #address-cells = <1>; 158 #size-cells = <0>; 159 compatible = "fsl,gianfar-mdio"; 160 reg = <0x520 0x20>; 161 phy2: ethernet-phy@2 { 162 interrupt-parent = <&ipic>; 163 interrupts = <17 0x8>; 164 reg = <0x2>; 165 }; 166 tbi0: tbi-phy@11 { 167 reg = <0x11>; 168 device_type = "tbi-phy"; 169 }; 170 }; 171 }; 172 173 enet1: ethernet@25000 { 174 #address-cells = <1>; 175 #size-cells = <1>; 176 cell-index = <1>; 177 device_type = "network"; 178 model = "eTSEC"; 179 compatible = "gianfar"; 180 reg = <0x25000 0x1000>; 181 ranges = <0x0 0x25000 0x1000>; 182 local-mac-address = [ 00 00 00 00 00 00 ]; 183 interrupts = <35 0x8 36 0x8 37 0x8>; 184 interrupt-parent = <&ipic>; 185 tbi-handle = < &tbi1 >; 186 /* Vitesse 7385 isn't on the MDIO bus */ 187 fixed-link = <1 1 1000 0 0>; 188 fsl,magic-packet; 189 190 mdio@520 { 191 #address-cells = <1>; 192 #size-cells = <0>; 193 compatible = "fsl,gianfar-tbi"; 194 reg = <0x520 0x20>; 195 196 tbi1: tbi-phy@11 { 197 reg = <0x11>; 198 device_type = "tbi-phy"; 199 }; 200 }; 201 }; 202 203 serial0: serial@4500 { 204 cell-index = <0>; 205 device_type = "serial"; 206 compatible = "fsl,ns16550", "ns16550"; 207 reg = <0x4500 0x100>; 208 clock-frequency = <133333333>; 209 interrupts = <9 0x8>; 210 interrupt-parent = <&ipic>; 211 }; 212 213 serial1: serial@4600 { 214 cell-index = <1>; 215 device_type = "serial"; 216 compatible = "fsl,ns16550", "ns16550"; 217 reg = <0x4600 0x100>; 218 clock-frequency = <133333333>; 219 interrupts = <10 0x8>; 220 interrupt-parent = <&ipic>; 221 }; 222 223 gpio@c00 { 224 #gpio-cells = <2>; 225 device_type = "gpio"; 226 compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; 227 reg = <0xc00 0x18>; 228 interrupts = <74 0x8>; 229 interrupt-parent = <&ipic>; 230 gpio-controller; 231 }; 232 233 /* IPIC 234 * interrupts cell = <intr #, sense> 235 * sense values match linux IORESOURCE_IRQ_* defines: 236 * sense == 8: Level, low assertion 237 * sense == 2: Edge, high-to-low change 238 */ 239 ipic: interrupt-controller@700 { 240 compatible = "fsl,ipic"; 241 interrupt-controller; 242 #address-cells = <0>; 243 #interrupt-cells = <2>; 244 reg = <0x700 0x100>; 245 device_type = "ipic"; 246 }; 247 248 ipic-msi@7c0 { 249 compatible = "fsl,ipic-msi"; 250 reg = <0x7c0 0x40>; 251 msi-available-ranges = <0x0 0x100>; 252 interrupts = < 0x43 0x8 253 0x4 0x8 254 0x51 0x8 255 0x52 0x8 256 0x56 0x8 257 0x57 0x8 258 0x58 0x8 259 0x59 0x8 >; 260 interrupt-parent = < &ipic >; 261 }; 262 263 dma@2c000 { 264 compatible = "fsl,mpc8308-dma"; 265 reg = <0x2c000 0x1800>; 266 interrupts = <3 0x8 267 94 0x8>; 268 interrupt-parent = < &ipic >; 269 }; 270 271 }; 272 273 pci0: pcie@e0009000 { 274 #address-cells = <3>; 275 #size-cells = <2>; 276 #interrupt-cells = <1>; 277 device_type = "pci"; 278 compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; 279 reg = <0xe0009000 0x00001000 280 0xb0000000 0x01000000>; 281 ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 282 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; 283 bus-range = <0 0>; 284 interrupt-map-mask = <0xf800 0 0 7>; 285 interrupt-map = <0 0 0 1 &ipic 1 8 286 0 0 0 2 &ipic 1 8 287 0 0 0 3 &ipic 1 8 288 0 0 0 4 &ipic 1 8>; 289 interrupts = <0x1 0x8>; 290 interrupt-parent = <&ipic>; 291 clock-frequency = <0>; 292 293 pcie@0 { 294 #address-cells = <3>; 295 #size-cells = <2>; 296 device_type = "pci"; 297 reg = <0 0 0 0 0>; 298 ranges = <0x02000000 0 0xa0000000 299 0x02000000 0 0xa0000000 300 0 0x10000000 301 0x01000000 0 0x00000000 302 0x01000000 0 0x00000000 303 0 0x00800000>; 304 }; 305 }; 306};