mpc8378_rdb.dts (11012B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * MPC8378E RDB Device Tree Source 4 * 5 * Copyright 2007, 2008 Freescale Semiconductor Inc. 6 */ 7 8/dts-v1/; 9 10/ { 11 compatible = "fsl,mpc8378rdb"; 12 #address-cells = <1>; 13 #size-cells = <1>; 14 15 aliases { 16 ethernet0 = &enet0; 17 ethernet1 = &enet1; 18 serial0 = &serial0; 19 serial1 = &serial1; 20 pci0 = &pci0; 21 pci1 = &pci1; 22 pci2 = &pci2; 23 }; 24 25 cpus { 26 #address-cells = <1>; 27 #size-cells = <0>; 28 29 PowerPC,8378@0 { 30 device_type = "cpu"; 31 reg = <0x0>; 32 d-cache-line-size = <32>; 33 i-cache-line-size = <32>; 34 d-cache-size = <32768>; 35 i-cache-size = <32768>; 36 timebase-frequency = <0>; 37 bus-frequency = <0>; 38 clock-frequency = <0>; 39 }; 40 }; 41 42 memory { 43 device_type = "memory"; 44 reg = <0x00000000 0x10000000>; // 256MB at 0 45 }; 46 47 localbus@e0005000 { 48 #address-cells = <2>; 49 #size-cells = <1>; 50 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; 51 reg = <0xe0005000 0x1000>; 52 interrupts = <77 0x8>; 53 interrupt-parent = <&ipic>; 54 55 // CS0 and CS1 are swapped when 56 // booting from nand, but the 57 // addresses are the same. 58 ranges = <0x0 0x0 0xfe000000 0x00800000 59 0x1 0x0 0xe0600000 0x00008000 60 0x2 0x0 0xf0000000 0x00020000 61 0x3 0x0 0xfa000000 0x00008000>; 62 63 flash@0,0 { 64 #address-cells = <1>; 65 #size-cells = <1>; 66 compatible = "cfi-flash"; 67 reg = <0x0 0x0 0x800000>; 68 bank-width = <2>; 69 device-width = <1>; 70 }; 71 72 nand@1,0 { 73 #address-cells = <1>; 74 #size-cells = <1>; 75 compatible = "fsl,mpc8378-fcm-nand", 76 "fsl,elbc-fcm-nand"; 77 reg = <0x1 0x0 0x8000>; 78 79 u-boot@0 { 80 reg = <0x0 0x100000>; 81 read-only; 82 }; 83 84 kernel@100000 { 85 reg = <0x100000 0x300000>; 86 }; 87 fs@400000 { 88 reg = <0x400000 0x1c00000>; 89 }; 90 }; 91 }; 92 93 immr@e0000000 { 94 #address-cells = <1>; 95 #size-cells = <1>; 96 device_type = "soc"; 97 compatible = "simple-bus"; 98 ranges = <0x0 0xe0000000 0x00100000>; 99 reg = <0xe0000000 0x00000200>; 100 bus-frequency = <0>; 101 102 wdt@200 { 103 device_type = "watchdog"; 104 compatible = "mpc83xx_wdt"; 105 reg = <0x200 0x100>; 106 }; 107 108 gpio1: gpio-controller@c00 { 109 #gpio-cells = <2>; 110 compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; 111 reg = <0xc00 0x100>; 112 interrupts = <74 0x8>; 113 interrupt-parent = <&ipic>; 114 gpio-controller; 115 }; 116 117 gpio2: gpio-controller@d00 { 118 #gpio-cells = <2>; 119 compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; 120 reg = <0xd00 0x100>; 121 interrupts = <75 0x8>; 122 interrupt-parent = <&ipic>; 123 gpio-controller; 124 }; 125 126 sleep-nexus { 127 #address-cells = <1>; 128 #size-cells = <1>; 129 compatible = "simple-bus"; 130 sleep = <&pmc 0x0c000000>; 131 ranges; 132 133 i2c@3000 { 134 #address-cells = <1>; 135 #size-cells = <0>; 136 cell-index = <0>; 137 compatible = "fsl-i2c"; 138 reg = <0x3000 0x100>; 139 interrupts = <14 0x8>; 140 interrupt-parent = <&ipic>; 141 dfsrr; 142 143 dtt@48 { 144 compatible = "national,lm75"; 145 reg = <0x48>; 146 }; 147 148 at24@50 { 149 compatible = "atmel,24c256"; 150 reg = <0x50>; 151 }; 152 153 rtc@68 { 154 compatible = "dallas,ds1339"; 155 reg = <0x68>; 156 }; 157 158 mcu_pio: mcu@a { 159 #gpio-cells = <2>; 160 compatible = "fsl,mc9s08qg8-mpc8378erdb", 161 "fsl,mcu-mpc8349emitx"; 162 reg = <0x0a>; 163 gpio-controller; 164 }; 165 }; 166 167 sdhci@2e000 { 168 compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; 169 reg = <0x2e000 0x1000>; 170 interrupts = <42 0x8>; 171 interrupt-parent = <&ipic>; 172 sdhci,wp-inverted; 173 /* Filled in by U-Boot */ 174 clock-frequency = <111111111>; 175 }; 176 }; 177 178 i2c@3100 { 179 #address-cells = <1>; 180 #size-cells = <0>; 181 cell-index = <1>; 182 compatible = "fsl-i2c"; 183 reg = <0x3100 0x100>; 184 interrupts = <15 0x8>; 185 interrupt-parent = <&ipic>; 186 dfsrr; 187 }; 188 189 spi@7000 { 190 cell-index = <0>; 191 compatible = "fsl,spi"; 192 reg = <0x7000 0x1000>; 193 interrupts = <16 0x8>; 194 interrupt-parent = <&ipic>; 195 mode = "cpu"; 196 }; 197 198 dma@82a8 { 199 #address-cells = <1>; 200 #size-cells = <1>; 201 compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; 202 reg = <0x82a8 4>; 203 ranges = <0 0x8100 0x1a8>; 204 interrupt-parent = <&ipic>; 205 interrupts = <71 8>; 206 cell-index = <0>; 207 dma-channel@0 { 208 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 209 reg = <0 0x80>; 210 cell-index = <0>; 211 interrupt-parent = <&ipic>; 212 interrupts = <71 8>; 213 }; 214 dma-channel@80 { 215 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 216 reg = <0x80 0x80>; 217 cell-index = <1>; 218 interrupt-parent = <&ipic>; 219 interrupts = <71 8>; 220 }; 221 dma-channel@100 { 222 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 223 reg = <0x100 0x80>; 224 cell-index = <2>; 225 interrupt-parent = <&ipic>; 226 interrupts = <71 8>; 227 }; 228 dma-channel@180 { 229 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; 230 reg = <0x180 0x28>; 231 cell-index = <3>; 232 interrupt-parent = <&ipic>; 233 interrupts = <71 8>; 234 }; 235 }; 236 237 usb@23000 { 238 compatible = "fsl-usb2-dr"; 239 reg = <0x23000 0x1000>; 240 #address-cells = <1>; 241 #size-cells = <0>; 242 interrupt-parent = <&ipic>; 243 interrupts = <38 0x8>; 244 phy_type = "ulpi"; 245 sleep = <&pmc 0x00c00000>; 246 }; 247 248 enet0: ethernet@24000 { 249 #address-cells = <1>; 250 #size-cells = <1>; 251 cell-index = <0>; 252 device_type = "network"; 253 model = "eTSEC"; 254 compatible = "gianfar"; 255 reg = <0x24000 0x1000>; 256 ranges = <0x0 0x24000 0x1000>; 257 local-mac-address = [ 00 00 00 00 00 00 ]; 258 interrupts = <32 0x8 33 0x8 34 0x8>; 259 phy-connection-type = "mii"; 260 interrupt-parent = <&ipic>; 261 tbi-handle = <&tbi0>; 262 phy-handle = <&phy2>; 263 sleep = <&pmc 0xc0000000>; 264 fsl,magic-packet; 265 266 mdio@520 { 267 #address-cells = <1>; 268 #size-cells = <0>; 269 compatible = "fsl,gianfar-mdio"; 270 reg = <0x520 0x20>; 271 272 phy2: ethernet-phy@2 { 273 interrupt-parent = <&ipic>; 274 interrupts = <17 0x8>; 275 reg = <0x2>; 276 }; 277 278 tbi0: tbi-phy@11 { 279 reg = <0x11>; 280 device_type = "tbi-phy"; 281 }; 282 }; 283 }; 284 285 enet1: ethernet@25000 { 286 #address-cells = <1>; 287 #size-cells = <1>; 288 cell-index = <1>; 289 device_type = "network"; 290 model = "eTSEC"; 291 compatible = "gianfar"; 292 reg = <0x25000 0x1000>; 293 ranges = <0x0 0x25000 0x1000>; 294 local-mac-address = [ 00 00 00 00 00 00 ]; 295 interrupts = <35 0x8 36 0x8 37 0x8>; 296 phy-connection-type = "mii"; 297 interrupt-parent = <&ipic>; 298 fixed-link = <1 1 1000 0 0>; 299 tbi-handle = <&tbi1>; 300 sleep = <&pmc 0x30000000>; 301 fsl,magic-packet; 302 303 mdio@520 { 304 #address-cells = <1>; 305 #size-cells = <0>; 306 compatible = "fsl,gianfar-tbi"; 307 reg = <0x520 0x20>; 308 309 tbi1: tbi-phy@11 { 310 reg = <0x11>; 311 device_type = "tbi-phy"; 312 }; 313 }; 314 }; 315 316 serial0: serial@4500 { 317 cell-index = <0>; 318 device_type = "serial"; 319 compatible = "fsl,ns16550", "ns16550"; 320 reg = <0x4500 0x100>; 321 clock-frequency = <0>; 322 interrupts = <9 0x8>; 323 interrupt-parent = <&ipic>; 324 }; 325 326 serial1: serial@4600 { 327 cell-index = <1>; 328 device_type = "serial"; 329 compatible = "fsl,ns16550", "ns16550"; 330 reg = <0x4600 0x100>; 331 clock-frequency = <0>; 332 interrupts = <10 0x8>; 333 interrupt-parent = <&ipic>; 334 }; 335 336 crypto@30000 { 337 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", 338 "fsl,sec2.1", "fsl,sec2.0"; 339 reg = <0x30000 0x10000>; 340 interrupts = <11 0x8>; 341 interrupt-parent = <&ipic>; 342 fsl,num-channels = <4>; 343 fsl,channel-fifo-len = <24>; 344 fsl,exec-units-mask = <0x9fe>; 345 fsl,descriptor-types-mask = <0x3ab0ebf>; 346 sleep = <&pmc 0x03000000>; 347 }; 348 349 /* IPIC 350 * interrupts cell = <intr #, sense> 351 * sense values match linux IORESOURCE_IRQ_* defines: 352 * sense == 8: Level, low assertion 353 * sense == 2: Edge, high-to-low change 354 */ 355 ipic: interrupt-controller@700 { 356 compatible = "fsl,ipic"; 357 interrupt-controller; 358 #address-cells = <0>; 359 #interrupt-cells = <2>; 360 reg = <0x700 0x100>; 361 }; 362 363 pmc: power@b00 { 364 compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; 365 reg = <0xb00 0x100 0xa00 0x100>; 366 interrupts = <80 0x8>; 367 interrupt-parent = <&ipic>; 368 }; 369 }; 370 371 pci0: pci@e0008500 { 372 interrupt-map-mask = <0xf800 0 0 7>; 373 interrupt-map = < 374 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ 375 376 /* IDSEL AD14 IRQ6 inta */ 377 0x7000 0x0 0x0 0x1 &ipic 22 0x8 378 379 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ 380 0x7800 0x0 0x0 0x1 &ipic 21 0x8 381 0x7800 0x0 0x0 0x2 &ipic 22 0x8 382 0x7800 0x0 0x0 0x4 &ipic 23 0x8 383 384 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ 385 0xE000 0x0 0x0 0x1 &ipic 23 0x8 386 0xE000 0x0 0x0 0x2 &ipic 21 0x8 387 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; 388 interrupt-parent = <&ipic>; 389 interrupts = <66 0x8>; 390 bus-range = <0 0>; 391 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 392 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 393 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; 394 sleep = <&pmc 0x00010000>; 395 clock-frequency = <66666666>; 396 #interrupt-cells = <1>; 397 #size-cells = <2>; 398 #address-cells = <3>; 399 reg = <0xe0008500 0x100 /* internal registers */ 400 0xe0008300 0x8>; /* config space access registers */ 401 compatible = "fsl,mpc8349-pci"; 402 device_type = "pci"; 403 }; 404 405 pci1: pcie@e0009000 { 406 #address-cells = <3>; 407 #size-cells = <2>; 408 #interrupt-cells = <1>; 409 device_type = "pci"; 410 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; 411 reg = <0xe0009000 0x00001000>; 412 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 413 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; 414 bus-range = <0 255>; 415 interrupt-map-mask = <0xf800 0 0 7>; 416 interrupt-map = <0 0 0 1 &ipic 1 8 417 0 0 0 2 &ipic 1 8 418 0 0 0 3 &ipic 1 8 419 0 0 0 4 &ipic 1 8>; 420 sleep = <&pmc 0x00300000>; 421 clock-frequency = <0>; 422 423 pcie@0 { 424 #address-cells = <3>; 425 #size-cells = <2>; 426 device_type = "pci"; 427 reg = <0 0 0 0 0>; 428 ranges = <0x02000000 0 0xa8000000 429 0x02000000 0 0xa8000000 430 0 0x10000000 431 0x01000000 0 0x00000000 432 0x01000000 0 0x00000000 433 0 0x00800000>; 434 }; 435 }; 436 437 pci2: pcie@e000a000 { 438 #address-cells = <3>; 439 #size-cells = <2>; 440 #interrupt-cells = <1>; 441 device_type = "pci"; 442 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; 443 reg = <0xe000a000 0x00001000>; 444 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 445 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; 446 bus-range = <0 255>; 447 interrupt-map-mask = <0xf800 0 0 7>; 448 interrupt-map = <0 0 0 1 &ipic 2 8 449 0 0 0 2 &ipic 2 8 450 0 0 0 3 &ipic 2 8 451 0 0 0 4 &ipic 2 8>; 452 sleep = <&pmc 0x000c0000>; 453 clock-frequency = <0>; 454 455 pcie@0 { 456 #address-cells = <3>; 457 #size-cells = <2>; 458 device_type = "pci"; 459 reg = <0 0 0 0 0>; 460 ranges = <0x02000000 0 0xc8000000 461 0x02000000 0 0xc8000000 462 0 0x10000000 463 0x01000000 0 0x00000000 464 0x01000000 0 0x00000000 465 0 0x00800000>; 466 }; 467 }; 468 469 leds { 470 compatible = "gpio-leds"; 471 472 pwr { 473 gpios = <&mcu_pio 0 0>; 474 default-state = "on"; 475 }; 476 477 hdd { 478 gpios = <&mcu_pio 1 0>; 479 linux,default-trigger = "disk-activity"; 480 }; 481 }; 482};