cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

Makefile (2017B)


      1# SPDX-License-Identifier: GPL-2.0
      2# Makefile for the Sparc boot stuff.
      3#
      4# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
      5# Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)
      6
      7ROOT_IMG	:= /usr/src/root.img
      8ELFTOAOUT	:= elftoaout
      9
     10hostprogs	:= piggyback
     11targets		:= tftpboot.img image zImage vmlinux.aout
     12clean-files	:= System.map
     13
     14quiet_cmd_elftoaout	= ELFTOAOUT $@
     15      cmd_elftoaout	= $(ELFTOAOUT) $(obj)/image -o $@
     16quiet_cmd_piggy		= PIGGY   $@
     17      cmd_piggy		= $(obj)/piggyback $(BITS) $@ System.map $(ROOT_IMG)
     18quiet_cmd_strip		= STRIP   $@
     19      cmd_strip		= $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $< -o $@
     20
     21ifeq ($(CONFIG_SPARC64),y)
     22
     23# Actual linking
     24
     25$(obj)/zImage: $(obj)/image FORCE
     26	$(call if_changed,gzip)
     27	@echo '  kernel: $@ is ready'
     28
     29$(obj)/vmlinux.aout: vmlinux FORCE
     30	$(call if_changed,elftoaout)
     31	@echo '  kernel: $@ is ready'
     32else
     33
     34$(obj)/zImage: $(obj)/image FORCE
     35	$(call if_changed,strip)
     36	@echo '  kernel: $@ is ready'
     37
     38# The following lines make a readable image for U-Boot.
     39#  uImage   - Binary file read by U-boot
     40#  uImage.o - object file of uImage for loading with a
     41#             flash programmer understanding ELF.
     42
     43OBJCOPYFLAGS_image.bin := -S -O binary -R .note -R .comment
     44$(obj)/image.bin: $(obj)/image FORCE
     45	$(call if_changed,objcopy)
     46
     47$(obj)/image.gz: $(obj)/image.bin FORCE
     48	$(call if_changed,gzip)
     49
     50UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR)
     51UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR)
     52UIMAGE_COMPRESSION = gzip
     53
     54quiet_cmd_uimage.o = UIMAGE.O $@
     55      cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \
     56                     -r -b binary $@ -o $@.o
     57
     58targets += uImage
     59$(obj)/uImage: $(obj)/image.gz FORCE
     60	$(call if_changed,uimage)
     61	$(call if_changed,uimage.o)
     62	@echo '  Image $@ is ready'
     63
     64endif
     65
     66$(obj)/image: vmlinux FORCE
     67	$(call if_changed,strip)
     68	@echo '  kernel: $@ is ready'
     69
     70$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
     71	$(call if_changed,elftoaout)
     72	$(call if_changed,piggy)