head_32.S (19367B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * head.S: The initial boot code for the Sparc port of Linux. 4 * 5 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) 6 * Copyright (C) 1995,1999 Pete Zaitcev (zaitcev@yahoo.com) 7 * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx) 8 * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) 9 * Copyright (C) 1997 Michael A. Griffith (grif@acm.org) 10 * 11 * CompactPCI platform by Eric Brower, 1999. 12 */ 13 14#include <linux/version.h> 15#include <linux/init.h> 16 17#include <asm/head.h> 18#include <asm/asi.h> 19#include <asm/contregs.h> 20#include <asm/ptrace.h> 21#include <asm/psr.h> 22#include <asm/page.h> 23#include <asm/kdebug.h> 24#include <asm/winmacro.h> 25#include <asm/thread_info.h> /* TI_UWINMASK */ 26#include <asm/errno.h> 27#include <asm/pgtable.h> /* PGDIR_SHIFT */ 28#include <asm/export.h> 29 30 .data 31/* The following are used with the prom_vector node-ops to figure out 32 * the cpu-type 33 */ 34 .align 4 35 .globl cputypval 36cputypval: 37 .asciz "sun4m" 38 .ascii " " 39 40/* Tested on SS-5, SS-10 */ 41 .align 4 42cputypvar: 43 .asciz "compatible" 44 45 .align 4 46 47notsup: 48 .asciz "Sparc-Linux sun4/sun4c or MMU-less not supported\n\n" 49 .align 4 50 51sun4e_notsup: 52 .asciz "Sparc-Linux sun4e support does not exist\n\n" 53 .align 4 54 55/* The trap-table - located in the __HEAD section */ 56#include "ttable_32.S" 57 58 .align PAGE_SIZE 59 60/* This was the only reasonable way I could think of to properly align 61 * these page-table data structures. 62 */ 63 .globl empty_zero_page 64empty_zero_page: .skip PAGE_SIZE 65EXPORT_SYMBOL(empty_zero_page) 66 67 .global root_flags 68 .global ram_flags 69 .global root_dev 70 .global sparc_ramdisk_image 71 .global sparc_ramdisk_size 72 73/* This stuff has to be in sync with SILO and other potential boot loaders 74 * Fields should be kept upward compatible and whenever any change is made, 75 * HdrS version should be incremented. 76 */ 77 .ascii "HdrS" 78 .word LINUX_VERSION_CODE 79 .half 0x0203 /* HdrS version */ 80root_flags: 81 .half 1 82root_dev: 83 .half 0 84ram_flags: 85 .half 0 86sparc_ramdisk_image: 87 .word 0 88sparc_ramdisk_size: 89 .word 0 90 .word reboot_command 91 .word 0, 0, 0 92 .word _end 93 94/* Cool, here we go. Pick up the romvec pointer in %o0 and stash it in 95 * %g7 and at prom_vector_p. And also quickly check whether we are on 96 * a v0, v2, or v3 prom. 97 */ 98gokernel: 99 /* Ok, it's nice to know, as early as possible, if we 100 * are already mapped where we expect to be in virtual 101 * memory. The Solaris /boot elf format bootloader 102 * will peek into our elf header and load us where 103 * we want to be, otherwise we have to re-map. 104 * 105 * Some boot loaders don't place the jmp'rs address 106 * in %o7, so we do a pc-relative call to a local 107 * label, then see what %o7 has. 108 */ 109 110 mov %o7, %g4 ! Save %o7 111 112 /* Jump to it, and pray... */ 113current_pc: 114 call 1f 115 nop 116 1171: 118 mov %o7, %g3 119 120 tst %o0 121 be no_sun4u_here 122 mov %g4, %o7 /* Previous %o7. */ 123 124 mov %o0, %l0 ! stash away romvec 125 mov %o0, %g7 ! put it here too 126 mov %o1, %l1 ! stash away debug_vec too 127 128 /* Ok, let's check out our run time program counter. */ 129 set current_pc, %g5 130 cmp %g3, %g5 131 be already_mapped 132 nop 133 134 /* %l6 will hold the offset we have to subtract 135 * from absolute symbols in order to access areas 136 * in our own image. If already mapped this is 137 * just plain zero, else it is KERNBASE. 138 */ 139 set KERNBASE, %l6 140 b copy_prom_lvl14 141 nop 142 143already_mapped: 144 mov 0, %l6 145 146 /* Copy over the Prom's level 14 clock handler. */ 147copy_prom_lvl14: 148#if 1 149 /* DJHR 150 * preserve our linked/calculated instructions 151 */ 152 set lvl14_save, %g1 153 set t_irq14, %g3 154 sub %g1, %l6, %g1 ! translate to physical 155 sub %g3, %l6, %g3 ! translate to physical 156 ldd [%g3], %g4 157 std %g4, [%g1] 158 ldd [%g3+8], %g4 159 std %g4, [%g1+8] 160#endif 161 rd %tbr, %g1 162 andn %g1, 0xfff, %g1 ! proms trap table base 163 or %g0, (0x1e<<4), %g2 ! offset to lvl14 intr 164 or %g1, %g2, %g2 165 set t_irq14, %g3 166 sub %g3, %l6, %g3 167 ldd [%g2], %g4 168 std %g4, [%g3] 169 ldd [%g2 + 0x8], %g4 170 std %g4, [%g3 + 0x8] ! Copy proms handler 171 172/* DON'T TOUCH %l0 thru %l5 in these remapping routines, 173 * we need their values afterwards! 174 */ 175 176 /* Now check whether we are already mapped, if we 177 * are we can skip all this garbage coming up. 178 */ 179copy_prom_done: 180 cmp %l6, 0 181 be go_to_highmem ! this will be a nop then 182 nop 183 184 /* Validate that we are in fact running on an 185 * SRMMU based cpu. 186 */ 187 set 0x4000, %g6 188 cmp %g7, %g6 189 bne not_a_sun4 190 nop 191 192halt_notsup: 193 ld [%g7 + 0x68], %o1 194 set notsup, %o0 195 sub %o0, %l6, %o0 196 call %o1 197 nop 198 ba halt_me 199 nop 200 201not_a_sun4: 202 /* It looks like this is a machine we support. 203 * Now find out what MMU we are dealing with 204 * LEON - identified by the psr.impl field 205 * Viking - identified by the psr.impl field 206 * In all other cases a sun4m srmmu. 207 * We check that the MMU is enabled in all cases. 208 */ 209 210 /* Check if this is a LEON CPU */ 211 rd %psr, %g3 212 srl %g3, PSR_IMPL_SHIFT, %g3 213 and %g3, PSR_IMPL_SHIFTED_MASK, %g3 214 cmp %g3, PSR_IMPL_LEON 215 be leon_remap /* It is a LEON - jump */ 216 nop 217 218 /* Sanity-check, is MMU enabled */ 219 lda [%g0] ASI_M_MMUREGS, %g1 220 andcc %g1, 1, %g0 221 be halt_notsup 222 nop 223 224 /* Check for a viking (TI) module. */ 225 cmp %g3, PSR_IMPL_TI 226 bne srmmu_not_viking 227 nop 228 229 /* Figure out what kind of viking we are on. 230 * We need to know if we have to play with the 231 * AC bit and disable traps or not. 232 */ 233 234 /* I've only seen MicroSparc's on SparcClassics with this 235 * bit set. 236 */ 237 set 0x800, %g2 238 lda [%g0] ASI_M_MMUREGS, %g3 ! peek in the control reg 239 and %g2, %g3, %g3 240 subcc %g3, 0x0, %g0 241 bnz srmmu_not_viking ! is in mbus mode 242 nop 243 244 rd %psr, %g3 ! DO NOT TOUCH %g3 245 andn %g3, PSR_ET, %g2 246 wr %g2, 0x0, %psr 247 WRITE_PAUSE 248 249 /* Get context table pointer, then convert to 250 * a physical address, which is 36 bits. 251 */ 252 set AC_M_CTPR, %g4 253 lda [%g4] ASI_M_MMUREGS, %g4 254 sll %g4, 0x4, %g4 ! We use this below 255 ! DO NOT TOUCH %g4 256 257 /* Set the AC bit in the Viking's MMU control reg. */ 258 lda [%g0] ASI_M_MMUREGS, %g5 ! DO NOT TOUCH %g5 259 set 0x8000, %g6 ! AC bit mask 260 or %g5, %g6, %g6 ! Or it in... 261 sta %g6, [%g0] ASI_M_MMUREGS ! Close your eyes... 262 263 /* Grrr, why does it seem like every other load/store 264 * on the sun4m is in some ASI space... 265 * Fine with me, let's get the pointer to the level 1 266 * page table directory and fetch its entry. 267 */ 268 lda [%g4] ASI_M_BYPASS, %o1 ! This is a level 1 ptr 269 srl %o1, 0x4, %o1 ! Clear low 4 bits 270 sll %o1, 0x8, %o1 ! Make physical 271 272 /* Ok, pull in the PTD. */ 273 lda [%o1] ASI_M_BYPASS, %o2 ! This is the 0x0 16MB pgd 274 275 /* Calculate to KERNBASE entry. */ 276 add %o1, KERNBASE >> (PGDIR_SHIFT - 2), %o3 277 278 /* Poke the entry into the calculated address. */ 279 sta %o2, [%o3] ASI_M_BYPASS 280 281 /* I don't get it Sun, if you engineered all these 282 * boot loaders and the PROM (thank you for the debugging 283 * features btw) why did you not have them load kernel 284 * images up in high address space, since this is necessary 285 * for ABI compliance anyways? Does this low-mapping provide 286 * enhanced interoperability? 287 * 288 * "The PROM is the computer." 289 */ 290 291 /* Ok, restore the MMU control register we saved in %g5 */ 292 sta %g5, [%g0] ASI_M_MMUREGS ! POW... ouch 293 294 /* Turn traps back on. We saved it in %g3 earlier. */ 295 wr %g3, 0x0, %psr ! tick tock, tick tock 296 297 /* Now we burn precious CPU cycles due to bad engineering. */ 298 WRITE_PAUSE 299 300 /* Wow, all that just to move a 32-bit value from one 301 * place to another... Jump to high memory. 302 */ 303 b go_to_highmem 304 nop 305 306srmmu_not_viking: 307 /* This works on viking's in Mbus mode and all 308 * other MBUS modules. It is virtually the same as 309 * the above madness sans turning traps off and flipping 310 * the AC bit. 311 */ 312 set AC_M_CTPR, %g1 313 lda [%g1] ASI_M_MMUREGS, %g1 ! get ctx table ptr 314 sll %g1, 0x4, %g1 ! make physical addr 315 lda [%g1] ASI_M_BYPASS, %g1 ! ptr to level 1 pg_table 316 srl %g1, 0x4, %g1 317 sll %g1, 0x8, %g1 ! make phys addr for l1 tbl 318 319 lda [%g1] ASI_M_BYPASS, %g2 ! get level1 entry for 0x0 320 add %g1, KERNBASE >> (PGDIR_SHIFT - 2), %g3 321 sta %g2, [%g3] ASI_M_BYPASS ! place at KERNBASE entry 322 b go_to_highmem 323 nop ! wheee.... 324 325 326leon_remap: 327 /* Sanity-check, is MMU enabled */ 328 lda [%g0] ASI_LEON_MMUREGS, %g1 329 andcc %g1, 1, %g0 330 be halt_notsup 331 nop 332 333 /* Same code as in the srmmu_not_viking case, 334 * with the LEON ASI for mmuregs 335 */ 336 set AC_M_CTPR, %g1 337 lda [%g1] ASI_LEON_MMUREGS, %g1 ! get ctx table ptr 338 sll %g1, 0x4, %g1 ! make physical addr 339 lda [%g1] ASI_M_BYPASS, %g1 ! ptr to level 1 pg_table 340 srl %g1, 0x4, %g1 341 sll %g1, 0x8, %g1 ! make phys addr for l1 tbl 342 343 lda [%g1] ASI_M_BYPASS, %g2 ! get level1 entry for 0x0 344 add %g1, KERNBASE >> (PGDIR_SHIFT - 2), %g3 345 sta %g2, [%g3] ASI_M_BYPASS ! place at KERNBASE entry 346 b go_to_highmem 347 nop ! wheee.... 348 349/* Now do a non-relative jump so that PC is in high-memory */ 350go_to_highmem: 351 set execute_in_high_mem, %g1 352 jmpl %g1, %g0 353 nop 354 355/* The code above should be at beginning and we have to take care about 356 * short jumps, as branching to .init.text section from .text is usually 357 * impossible */ 358 __INIT 359/* Acquire boot time privileged register values, this will help debugging. 360 * I figure out and store nwindows and nwindowsm1 later on. 361 */ 362execute_in_high_mem: 363 mov %l0, %o0 ! put back romvec 364 mov %l1, %o1 ! and debug_vec 365 366 sethi %hi(prom_vector_p), %g1 367 st %o0, [%g1 + %lo(prom_vector_p)] 368 369 sethi %hi(linux_dbvec), %g1 370 st %o1, [%g1 + %lo(linux_dbvec)] 371 372 /* Get the machine type via the romvec 373 * getprops node operation 374 */ 375 add %g7, 0x1c, %l1 376 ld [%l1], %l0 377 ld [%l0], %l0 378 call %l0 379 or %g0, %g0, %o0 ! next_node(0) = first_node 380 or %o0, %g0, %g6 381 382 sethi %hi(cputypvar), %o1 ! First node has cpu-arch 383 or %o1, %lo(cputypvar), %o1 384 sethi %hi(cputypval), %o2 ! information, the string 385 or %o2, %lo(cputypval), %o2 386 ld [%l1], %l0 ! 'compatible' tells 387 ld [%l0 + 0xc], %l0 ! that we want 'sun4x' where 388 call %l0 ! x is one of 'm', 'd' or 'e'. 389 nop ! %o2 holds pointer 390 ! to a buf where above string 391 ! will get stored by the prom. 392 393 394 /* Check value of "compatible" property. 395 * "value" => "model" 396 * leon => sparc_leon 397 * sun4m => sun4m 398 * sun4s => sun4m 399 * sun4d => sun4d 400 * sun4e => "no_sun4e_here" 401 * '*' => "no_sun4u_here" 402 * Check single letters only 403 */ 404 405 set cputypval, %o2 406 /* If cputypval[0] == 'l' (lower case letter L) this is leon */ 407 ldub [%o2], %l1 408 cmp %l1, 'l' 409 be leon_init 410 nop 411 412 /* Check cputypval[4] to find the sun model */ 413 ldub [%o2 + 0x4], %l1 414 415 cmp %l1, 'm' 416 be sun4m_init 417 cmp %l1, 's' 418 be sun4m_init 419 cmp %l1, 'd' 420 be sun4d_init 421 cmp %l1, 'e' 422 be no_sun4e_here ! Could be a sun4e. 423 nop 424 b no_sun4u_here ! AIEEE, a V9 sun4u... Get our BIG BROTHER kernel :)) 425 nop 426 427leon_init: 428 /* LEON CPU - set boot_cpu_id */ 429 sethi %hi(boot_cpu_id), %g2 ! boot-cpu index 430 431#ifdef CONFIG_SMP 432 ldub [%g2 + %lo(boot_cpu_id)], %g1 433 cmp %g1, 0xff ! unset means first CPU 434 bne leon_smp_cpu_startup ! continue only with master 435 nop 436#endif 437 /* Get CPU-ID from most significant 4-bit of ASR17 */ 438 rd %asr17, %g1 439 srl %g1, 28, %g1 440 441 /* Update boot_cpu_id only on boot cpu */ 442 stub %g1, [%g2 + %lo(boot_cpu_id)] 443 444 ba continue_boot 445 nop 446 447/* CPUID in bootbus can be found at PA 0xff0140000 */ 448#define SUN4D_BOOTBUS_CPUID 0xf0140000 449 450sun4d_init: 451 /* Need to patch call to handler_irq */ 452 set patch_handler_irq, %g4 453 set sun4d_handler_irq, %g5 454 sethi %hi(0x40000000), %g3 ! call 455 sub %g5, %g4, %g5 456 srl %g5, 2, %g5 457 or %g5, %g3, %g5 458 st %g5, [%g4] 459 460#ifdef CONFIG_SMP 461 /* Get our CPU id out of bootbus */ 462 set SUN4D_BOOTBUS_CPUID, %g3 463 lduba [%g3] ASI_M_CTL, %g3 464 and %g3, 0xf8, %g3 465 srl %g3, 3, %g4 466 sta %g4, [%g0] ASI_M_VIKING_TMP1 467 sethi %hi(boot_cpu_id), %g5 468 stb %g4, [%g5 + %lo(boot_cpu_id)] 469#endif 470 471 /* Fall through to sun4m_init */ 472 473sun4m_init: 474/* Ok, the PROM could have done funny things and apple cider could still 475 * be sitting in the fault status/address registers. Read them all to 476 * clear them so we don't get magic faults later on. 477 */ 478/* This sucks, apparently this makes Vikings call prom panic, will fix later */ 4792: 480 rd %psr, %o1 481 srl %o1, PSR_IMPL_SHIFT, %o1 ! Get a type of the CPU 482 483 subcc %o1, PSR_IMPL_TI, %g0 ! TI: Viking or MicroSPARC 484 be continue_boot 485 nop 486 487 set AC_M_SFSR, %o0 488 lda [%o0] ASI_M_MMUREGS, %g0 489 set AC_M_SFAR, %o0 490 lda [%o0] ASI_M_MMUREGS, %g0 491 492 /* Fujitsu MicroSPARC-II has no asynchronous flavors of FARs */ 493 subcc %o1, 0, %g0 494 be continue_boot 495 nop 496 497 set AC_M_AFSR, %o0 498 lda [%o0] ASI_M_MMUREGS, %g0 499 set AC_M_AFAR, %o0 500 lda [%o0] ASI_M_MMUREGS, %g0 501 nop 502 503 504continue_boot: 505 506/* Aieee, now set PC and nPC, enable traps, give ourselves a stack and it's 507 * show-time! 508 */ 509 /* Turn on Supervisor, EnableFloating, and all the PIL bits. 510 * Also puts us in register window zero with traps off. 511 */ 512 set (PSR_PS | PSR_S | PSR_PIL | PSR_EF), %g2 513 wr %g2, 0x0, %psr 514 WRITE_PAUSE 515 516 /* I want a kernel stack NOW! */ 517 set init_thread_union, %g1 518 set (THREAD_SIZE - STACKFRAME_SZ - TRACEREG_SZ), %g2 519 add %g1, %g2, %sp 520 mov 0, %fp /* And for good luck */ 521 522 /* Zero out our BSS section. */ 523 set __bss_start , %o0 ! First address of BSS 524 set _end , %o1 ! Last address of BSS 525 add %o0, 0x1, %o0 5261: 527 stb %g0, [%o0] 528 subcc %o0, %o1, %g0 529 bl 1b 530 add %o0, 0x1, %o0 531 532 /* If boot_cpu_id has not been setup by machine specific 533 * init-code above we default it to zero. 534 */ 535 sethi %hi(boot_cpu_id), %g2 536 ldub [%g2 + %lo(boot_cpu_id)], %g3 537 cmp %g3, 0xff 538 bne 1f 539 nop 540 mov %g0, %g3 541 stub %g3, [%g2 + %lo(boot_cpu_id)] 542 5431: sll %g3, 2, %g3 544 545 /* Initialize the uwinmask value for init task just in case. 546 * But first make current_set[boot_cpu_id] point to something useful. 547 */ 548 set init_thread_union, %g6 549 set current_set, %g2 550#ifdef CONFIG_SMP 551 st %g6, [%g2] 552 add %g2, %g3, %g2 553#endif 554 st %g6, [%g2] 555 556 st %g0, [%g6 + TI_UWINMASK] 557 558/* Compute NWINDOWS and stash it away. Now uses %wim trick explained 559 * in the V8 manual. Ok, this method seems to work, Sparc is cool... 560 * No, it doesn't work, have to play the save/readCWP/restore trick. 561 */ 562 563 wr %g0, 0x0, %wim ! so we do not get a trap 564 WRITE_PAUSE 565 566 save 567 568 rd %psr, %g3 569 570 restore 571 572 and %g3, 0x1f, %g3 573 add %g3, 0x1, %g3 574 575 mov 2, %g1 576 wr %g1, 0x0, %wim ! make window 1 invalid 577 WRITE_PAUSE 578 579 cmp %g3, 0x7 580 bne 2f 581 nop 582 583 /* Adjust our window handling routines to 584 * do things correctly on 7 window Sparcs. 585 */ 586 587#define PATCH_INSN(src, dest) \ 588 set src, %g5; \ 589 set dest, %g2; \ 590 ld [%g5], %g4; \ 591 st %g4, [%g2]; 592 593 /* Patch for window spills... */ 594 PATCH_INSN(spnwin_patch1_7win, spnwin_patch1) 595 PATCH_INSN(spnwin_patch2_7win, spnwin_patch2) 596 PATCH_INSN(spnwin_patch3_7win, spnwin_patch3) 597 598 /* Patch for window fills... */ 599 PATCH_INSN(fnwin_patch1_7win, fnwin_patch1) 600 PATCH_INSN(fnwin_patch2_7win, fnwin_patch2) 601 602 /* Patch for trap entry setup... */ 603 PATCH_INSN(tsetup_7win_patch1, tsetup_patch1) 604 PATCH_INSN(tsetup_7win_patch2, tsetup_patch2) 605 PATCH_INSN(tsetup_7win_patch3, tsetup_patch3) 606 PATCH_INSN(tsetup_7win_patch4, tsetup_patch4) 607 PATCH_INSN(tsetup_7win_patch5, tsetup_patch5) 608 PATCH_INSN(tsetup_7win_patch6, tsetup_patch6) 609 610 /* Patch for returning from traps... */ 611 PATCH_INSN(rtrap_7win_patch1, rtrap_patch1) 612 PATCH_INSN(rtrap_7win_patch2, rtrap_patch2) 613 PATCH_INSN(rtrap_7win_patch3, rtrap_patch3) 614 PATCH_INSN(rtrap_7win_patch4, rtrap_patch4) 615 PATCH_INSN(rtrap_7win_patch5, rtrap_patch5) 616 617 /* Patch for killing user windows from the register file. */ 618 PATCH_INSN(kuw_patch1_7win, kuw_patch1) 619 620 /* Now patch the kernel window flush sequences. 621 * This saves 2 traps on every switch and fork. 622 */ 623 set 0x01000000, %g4 624 set flush_patch_one, %g5 625 st %g4, [%g5 + 0x18] 626 st %g4, [%g5 + 0x1c] 627 set flush_patch_two, %g5 628 st %g4, [%g5 + 0x18] 629 st %g4, [%g5 + 0x1c] 630 set flush_patch_three, %g5 631 st %g4, [%g5 + 0x18] 632 st %g4, [%g5 + 0x1c] 633 set flush_patch_four, %g5 634 st %g4, [%g5 + 0x18] 635 st %g4, [%g5 + 0x1c] 636 set flush_patch_exception, %g5 637 st %g4, [%g5 + 0x18] 638 st %g4, [%g5 + 0x1c] 639 set flush_patch_switch, %g5 640 st %g4, [%g5 + 0x18] 641 st %g4, [%g5 + 0x1c] 642 6432: 644 sethi %hi(nwindows), %g4 645 st %g3, [%g4 + %lo(nwindows)] ! store final value 646 sub %g3, 0x1, %g3 647 sethi %hi(nwindowsm1), %g4 648 st %g3, [%g4 + %lo(nwindowsm1)] 649 650 /* Here we go, start using Linux's trap table... */ 651 set trapbase, %g3 652 wr %g3, 0x0, %tbr 653 WRITE_PAUSE 654 655 /* Finally, turn on traps so that we can call c-code. */ 656 rd %psr, %g3 657 wr %g3, 0x0, %psr 658 WRITE_PAUSE 659 660 wr %g3, PSR_ET, %psr 661 WRITE_PAUSE 662 663 /* Call sparc32_start_kernel(struct linux_romvec *rp) */ 664 sethi %hi(prom_vector_p), %g5 665 ld [%g5 + %lo(prom_vector_p)], %o0 666 call sparc32_start_kernel 667 nop 668 669 /* We should not get here. */ 670 call halt_me 671 nop 672 673no_sun4e_here: 674 ld [%g7 + 0x68], %o1 675 set sun4e_notsup, %o0 676 call %o1 677 nop 678 b halt_me 679 nop 680 681 __INITDATA 682 683sun4u_1: 684 .asciz "finddevice" 685 .align 4 686sun4u_2: 687 .asciz "/chosen" 688 .align 4 689sun4u_3: 690 .asciz "getprop" 691 .align 4 692sun4u_4: 693 .asciz "stdout" 694 .align 4 695sun4u_5: 696 .asciz "write" 697 .align 4 698sun4u_6: 699 .asciz "\n\rOn sun4u you have to use sparc64 kernel\n\rand not a sparc32 version\n\r\n\r" 700sun4u_6e: 701 .align 4 702sun4u_7: 703 .asciz "exit" 704 .align 8 705sun4u_a1: 706 .word 0, sun4u_1, 0, 1, 0, 1, 0, sun4u_2, 0 707sun4u_r1: 708 .word 0 709sun4u_a2: 710 .word 0, sun4u_3, 0, 4, 0, 1, 0 711sun4u_i2: 712 .word 0, 0, sun4u_4, 0, sun4u_1, 0, 8, 0 713sun4u_r2: 714 .word 0 715sun4u_a3: 716 .word 0, sun4u_5, 0, 3, 0, 1, 0 717sun4u_i3: 718 .word 0, 0, sun4u_6, 0, sun4u_6e - sun4u_6 - 1, 0 719sun4u_r3: 720 .word 0 721sun4u_a4: 722 .word 0, sun4u_7, 0, 0, 0, 0 723sun4u_r4: 724 725 __INIT 726no_sun4u_here: 727 set sun4u_a1, %o0 728 set current_pc, %l2 729 cmp %l2, %g3 730 be 1f 731 mov %o4, %l0 732 sub %g3, %l2, %l6 733 add %o0, %l6, %o0 734 mov %o0, %l4 735 mov sun4u_r4 - sun4u_a1, %l3 736 ld [%l4], %l5 7372: 738 add %l4, 4, %l4 739 cmp %l5, %l2 740 add %l5, %l6, %l5 741 bgeu,a 3f 742 st %l5, [%l4 - 4] 7433: 744 subcc %l3, 4, %l3 745 bne 2b 746 ld [%l4], %l5 7471: 748 call %l0 749 mov %o0, %l1 750 751 ld [%l1 + (sun4u_r1 - sun4u_a1)], %o1 752 add %l1, (sun4u_a2 - sun4u_a1), %o0 753 call %l0 754 st %o1, [%o0 + (sun4u_i2 - sun4u_a2)] 755 756 ld [%l1 + (sun4u_1 - sun4u_a1)], %o1 757 add %l1, (sun4u_a3 - sun4u_a1), %o0 758 call %l0 759 st %o1, [%o0 + (sun4u_i3 - sun4u_a3)] 760 761 call %l0 762 add %l1, (sun4u_a4 - sun4u_a1), %o0 763 764 /* Not reached */ 765halt_me: 766 ld [%g7 + 0x74], %o0 767 call %o0 ! Get us out of here... 768 nop ! Apparently Solaris is better. 769 770/* Ok, now we continue in the .data/.text sections */ 771 772 .data 773 .align 4 774 775/* 776 * Fill up the prom vector, note in particular the kind first element, 777 * no joke. I don't need all of them in here as the entire prom vector 778 * gets initialized in c-code so all routines can use it. 779 */ 780 781prom_vector_p: 782 .word 0 783 784/* We calculate the following at boot time, window fills/spills and trap entry 785 * code uses these to keep track of the register windows. 786 */ 787 788 .align 4 789 .globl nwindows 790 .globl nwindowsm1 791nwindows: 792 .word 8 793nwindowsm1: 794 .word 7 795 796/* Boot time debugger vector value. We need this later on. */ 797 798 .align 4 799 .globl linux_dbvec 800linux_dbvec: 801 .word 0 802 .word 0 803 804 .align 8 805 806 .globl lvl14_save 807lvl14_save: 808 .word 0 809 .word 0 810 .word 0 811 .word 0 812 .word t_irq14