tie.h (5148B)
1/* 2 * This header file describes this specific Xtensa processor's TIE extensions 3 * that extend basic Xtensa core functionality. It is customized to this 4 * Xtensa processor configuration. 5 * 6 * This file is subject to the terms and conditions of the GNU General Public 7 * License. See the file "COPYING" in the main directory of this archive 8 * for more details. 9 * 10 * Copyright (C) 1999-2007 Tensilica Inc. 11 */ 12 13#ifndef _XTENSA_CORE_TIE_H 14#define _XTENSA_CORE_TIE_H 15 16#define XCHAL_CP_NUM 1 /* number of coprocessors */ 17#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */ 18#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */ 19#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */ 20 21/* Basic parameters of each coprocessor: */ 22#define XCHAL_CP7_NAME "XTIOP" 23#define XCHAL_CP7_IDENT XTIOP 24#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ 25#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ 26#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ 27 28/* Filler info for unassigned coprocessors, to simplify arrays etc: */ 29#define XCHAL_CP0_SA_SIZE 0 30#define XCHAL_CP0_SA_ALIGN 1 31#define XCHAL_CP1_SA_SIZE 0 32#define XCHAL_CP1_SA_ALIGN 1 33#define XCHAL_CP2_SA_SIZE 0 34#define XCHAL_CP2_SA_ALIGN 1 35#define XCHAL_CP3_SA_SIZE 0 36#define XCHAL_CP3_SA_ALIGN 1 37#define XCHAL_CP4_SA_SIZE 0 38#define XCHAL_CP4_SA_ALIGN 1 39#define XCHAL_CP5_SA_SIZE 0 40#define XCHAL_CP5_SA_ALIGN 1 41#define XCHAL_CP6_SA_SIZE 0 42#define XCHAL_CP6_SA_ALIGN 1 43 44/* Save area for non-coprocessor optional and custom (TIE) state: */ 45#define XCHAL_NCP_SA_SIZE 32 46#define XCHAL_NCP_SA_ALIGN 4 47 48/* Total save area for optional and custom state (NCP + CPn): */ 49#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ 50#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ 51 52/* 53 * Detailed contents of save areas. 54 * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) 55 * before expanding the XCHAL_xxx_SA_LIST() macros. 56 * 57 * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, 58 * dbnum,base,regnum,bitsz,gapsz,reset,x...) 59 * 60 * s = passed from XCHAL_*_LIST(s), eg. to select how to expand 61 * ccused = set if used by compiler without special options or code 62 * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) 63 * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) 64 * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) 65 * name = lowercase reg name (no quotes) 66 * galign = group byte alignment (power of 2) (galign >= align) 67 * align = register byte alignment (power of 2) 68 * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) 69 * (not including any pad bytes required to galign this or next reg) 70 * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) 71 * base = reg shortname w/o index (or sr=special, ur=TIE user reg) 72 * regnum = reg index in regfile, or special/TIE-user reg number 73 * bitsz = number of significant bits (regfile width, or ur/sr mask bits) 74 * gapsz = intervening bits, if bitsz bits not stored contiguously 75 * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) 76 * reset = register reset value (or 0 if undefined at reset) 77 * x = reserved for future use (0 until then) 78 * 79 * To filter out certain registers, e.g. to expand only the non-global 80 * registers used by the compiler, you can do something like this: 81 * 82 * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) 83 * #define SELCC0(p...) 84 * #define SELCC1(abikind,p...) SELAK##abikind(p) 85 * #define SELAK0(p...) REG(p) 86 * #define SELAK1(p...) REG(p) 87 * #define SELAK2(p...) 88 * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ 89 * ...what you want to expand... 90 */ 91 92#define XCHAL_NCP_SA_NUM 8 93#define XCHAL_NCP_SA_LIST(s) \ 94 XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ 95 XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ 96 XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ 97 XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ 98 XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ 99 XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \ 100 XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ 101 XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) 102 103#define XCHAL_CP0_SA_NUM 0 104#define XCHAL_CP0_SA_LIST(s) /* empty */ 105 106#define XCHAL_CP1_SA_NUM 0 107#define XCHAL_CP1_SA_LIST(s) /* empty */ 108 109#define XCHAL_CP2_SA_NUM 0 110#define XCHAL_CP2_SA_LIST(s) /* empty */ 111 112#define XCHAL_CP3_SA_NUM 0 113#define XCHAL_CP3_SA_LIST(s) /* empty */ 114 115#define XCHAL_CP4_SA_NUM 0 116#define XCHAL_CP4_SA_LIST(s) /* empty */ 117 118#define XCHAL_CP5_SA_NUM 0 119#define XCHAL_CP5_SA_LIST(s) /* empty */ 120 121#define XCHAL_CP6_SA_NUM 0 122#define XCHAL_CP6_SA_LIST(s) /* empty */ 123 124#define XCHAL_CP7_SA_NUM 0 125#define XCHAL_CP7_SA_LIST(s) /* empty */ 126 127/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ 128#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 129 130#endif /*_XTENSA_CORE_TIE_H*/ 131