cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

solos-pci.c (39708B)


      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
      4 *  Traverse Technologies -- https://www.traverse.com.au/
      5 *  Xrio Limited          -- http://www.xrio.com/
      6 *
      7 * Copyright © 2008 Traverse Technologies
      8 * Copyright © 2008 Intel Corporation
      9 *
     10 * Authors: Nathan Williams <nathan@traverse.com.au>
     11 *          David Woodhouse <dwmw2@infradead.org>
     12 *          Treker Chen <treker@xrio.com>
     13 */
     14
     15#define DEBUG
     16#define VERBOSE_DEBUG
     17
     18#include <linux/interrupt.h>
     19#include <linux/module.h>
     20#include <linux/kernel.h>
     21#include <linux/errno.h>
     22#include <linux/ioport.h>
     23#include <linux/types.h>
     24#include <linux/pci.h>
     25#include <linux/atm.h>
     26#include <linux/atmdev.h>
     27#include <linux/skbuff.h>
     28#include <linux/sysfs.h>
     29#include <linux/device.h>
     30#include <linux/kobject.h>
     31#include <linux/firmware.h>
     32#include <linux/ctype.h>
     33#include <linux/swab.h>
     34#include <linux/slab.h>
     35
     36#define VERSION "1.04"
     37#define DRIVER_VERSION 0x01
     38#define PTAG "solos-pci"
     39
     40#define CONFIG_RAM_SIZE	128
     41#define FLAGS_ADDR	0x7C
     42#define IRQ_EN_ADDR	0x78
     43#define FPGA_VER	0x74
     44#define IRQ_CLEAR	0x70
     45#define WRITE_FLASH	0x6C
     46#define PORTS		0x68
     47#define FLASH_BLOCK	0x64
     48#define FLASH_BUSY	0x60
     49#define FPGA_MODE	0x5C
     50#define FLASH_MODE	0x58
     51#define GPIO_STATUS	0x54
     52#define DRIVER_VER	0x50
     53#define TX_DMA_ADDR(port)	(0x40 + (4 * (port)))
     54#define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
     55
     56#define DATA_RAM_SIZE	32768
     57#define BUF_SIZE	2048
     58#define OLD_BUF_SIZE	4096 /* For FPGA versions <= 2*/
     59/* Old boards use ATMEL AD45DB161D flash */
     60#define ATMEL_FPGA_PAGE	528 /* FPGA flash page size*/
     61#define ATMEL_SOLOS_PAGE	512 /* Solos flash page size*/
     62#define ATMEL_FPGA_BLOCK	(ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
     63#define ATMEL_SOLOS_BLOCK	(ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
     64/* Current boards use M25P/M25PE SPI flash */
     65#define SPI_FLASH_BLOCK	(256 * 64)
     66
     67#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
     68#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
     69#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
     70
     71#define RX_DMA_SIZE	2048
     72
     73#define FPGA_VERSION(a,b) (((a) << 8) + (b))
     74#define LEGACY_BUFFERS	2
     75#define DMA_SUPPORTED	4
     76
     77static int reset = 0;
     78static int atmdebug = 0;
     79static int firmware_upgrade = 0;
     80static int fpga_upgrade = 0;
     81static int db_firmware_upgrade = 0;
     82static int db_fpga_upgrade = 0;
     83
     84struct pkt_hdr {
     85	__le16 size;
     86	__le16 vpi;
     87	__le16 vci;
     88	__le16 type;
     89};
     90
     91struct solos_skb_cb {
     92	struct atm_vcc *vcc;
     93	uint32_t dma_addr;
     94};
     95
     96
     97#define SKB_CB(skb)		((struct solos_skb_cb *)skb->cb)
     98
     99#define PKT_DATA	0
    100#define PKT_COMMAND	1
    101#define PKT_POPEN	3
    102#define PKT_PCLOSE	4
    103#define PKT_STATUS	5
    104
    105struct solos_card {
    106	void __iomem *config_regs;
    107	void __iomem *buffers;
    108	int nr_ports;
    109	int tx_mask;
    110	struct pci_dev *dev;
    111	struct atm_dev *atmdev[4];
    112	struct tasklet_struct tlet;
    113	spinlock_t tx_lock;
    114	spinlock_t tx_queue_lock;
    115	spinlock_t cli_queue_lock;
    116	spinlock_t param_queue_lock;
    117	struct list_head param_queue;
    118	struct sk_buff_head tx_queue[4];
    119	struct sk_buff_head cli_queue[4];
    120	struct sk_buff *tx_skb[4];
    121	struct sk_buff *rx_skb[4];
    122	unsigned char *dma_bounce;
    123	wait_queue_head_t param_wq;
    124	wait_queue_head_t fw_wq;
    125	int using_dma;
    126	int dma_alignment;
    127	int fpga_version;
    128	int buffer_size;
    129	int atmel_flash;
    130};
    131
    132
    133struct solos_param {
    134	struct list_head list;
    135	pid_t pid;
    136	int port;
    137	struct sk_buff *response;
    138};
    139
    140#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
    141
    142MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
    143MODULE_DESCRIPTION("Solos PCI driver");
    144MODULE_VERSION(VERSION);
    145MODULE_LICENSE("GPL");
    146MODULE_FIRMWARE("solos-FPGA.bin");
    147MODULE_FIRMWARE("solos-Firmware.bin");
    148MODULE_FIRMWARE("solos-db-FPGA.bin");
    149MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
    150MODULE_PARM_DESC(atmdebug, "Print ATM data");
    151MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
    152MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
    153MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
    154MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
    155module_param(reset, int, 0444);
    156module_param(atmdebug, int, 0644);
    157module_param(firmware_upgrade, int, 0444);
    158module_param(fpga_upgrade, int, 0444);
    159module_param(db_firmware_upgrade, int, 0444);
    160module_param(db_fpga_upgrade, int, 0444);
    161
    162static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
    163		       struct atm_vcc *vcc);
    164static uint32_t fpga_tx(struct solos_card *);
    165static irqreturn_t solos_irq(int irq, void *dev_id);
    166static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
    167static int atm_init(struct solos_card *, struct device *);
    168static void atm_remove(struct solos_card *);
    169static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
    170static void solos_bh(unsigned long);
    171static int print_buffer(struct sk_buff *buf);
    172
    173static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
    174{
    175        if (vcc->pop)
    176                vcc->pop(vcc, skb);
    177        else
    178                dev_kfree_skb_any(skb);
    179}
    180
    181static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
    182				char *buf)
    183{
    184	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
    185	struct solos_card *card = atmdev->dev_data;
    186	struct solos_param prm;
    187	struct sk_buff *skb;
    188	struct pkt_hdr *header;
    189	int buflen;
    190
    191	buflen = strlen(attr->attr.name) + 10;
    192
    193	skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
    194	if (!skb) {
    195		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
    196		return -ENOMEM;
    197	}
    198
    199	header = skb_put(skb, sizeof(*header));
    200
    201	buflen = snprintf((void *)&header[1], buflen - 1,
    202			  "L%05d\n%s\n", current->pid, attr->attr.name);
    203	skb_put(skb, buflen);
    204
    205	header->size = cpu_to_le16(buflen);
    206	header->vpi = cpu_to_le16(0);
    207	header->vci = cpu_to_le16(0);
    208	header->type = cpu_to_le16(PKT_COMMAND);
    209
    210	prm.pid = current->pid;
    211	prm.response = NULL;
    212	prm.port = SOLOS_CHAN(atmdev);
    213
    214	spin_lock_irq(&card->param_queue_lock);
    215	list_add(&prm.list, &card->param_queue);
    216	spin_unlock_irq(&card->param_queue_lock);
    217
    218	fpga_queue(card, prm.port, skb, NULL);
    219
    220	wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
    221
    222	spin_lock_irq(&card->param_queue_lock);
    223	list_del(&prm.list);
    224	spin_unlock_irq(&card->param_queue_lock);
    225
    226	if (!prm.response)
    227		return -EIO;
    228
    229	buflen = prm.response->len;
    230	memcpy(buf, prm.response->data, buflen);
    231	kfree_skb(prm.response);
    232
    233	return buflen;
    234}
    235
    236static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
    237				 const char *buf, size_t count)
    238{
    239	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
    240	struct solos_card *card = atmdev->dev_data;
    241	struct solos_param prm;
    242	struct sk_buff *skb;
    243	struct pkt_hdr *header;
    244	int buflen;
    245	ssize_t ret;
    246
    247	buflen = strlen(attr->attr.name) + 11 + count;
    248
    249	skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
    250	if (!skb) {
    251		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
    252		return -ENOMEM;
    253	}
    254
    255	header = skb_put(skb, sizeof(*header));
    256
    257	buflen = snprintf((void *)&header[1], buflen - 1,
    258			  "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
    259
    260	skb_put(skb, buflen);
    261	header->size = cpu_to_le16(buflen);
    262	header->vpi = cpu_to_le16(0);
    263	header->vci = cpu_to_le16(0);
    264	header->type = cpu_to_le16(PKT_COMMAND);
    265
    266	prm.pid = current->pid;
    267	prm.response = NULL;
    268	prm.port = SOLOS_CHAN(atmdev);
    269
    270	spin_lock_irq(&card->param_queue_lock);
    271	list_add(&prm.list, &card->param_queue);
    272	spin_unlock_irq(&card->param_queue_lock);
    273
    274	fpga_queue(card, prm.port, skb, NULL);
    275
    276	wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
    277
    278	spin_lock_irq(&card->param_queue_lock);
    279	list_del(&prm.list);
    280	spin_unlock_irq(&card->param_queue_lock);
    281
    282	skb = prm.response;
    283
    284	if (!skb)
    285		return -EIO;
    286
    287	buflen = skb->len;
    288
    289	/* Sometimes it has a newline, sometimes it doesn't. */
    290	if (skb->data[buflen - 1] == '\n')
    291		buflen--;
    292
    293	if (buflen == 2 && !strncmp(skb->data, "OK", 2))
    294		ret = count;
    295	else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
    296		ret = -EIO;
    297	else {
    298		/* We know we have enough space allocated for this; we allocated 
    299		   it ourselves */
    300		skb->data[buflen] = 0;
    301	
    302		dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
    303			 skb->data);
    304		ret = -EIO;
    305	}
    306	kfree_skb(skb);
    307
    308	return ret;
    309}
    310
    311static char *next_string(struct sk_buff *skb)
    312{
    313	int i = 0;
    314	char *this = skb->data;
    315	
    316	for (i = 0; i < skb->len; i++) {
    317		if (this[i] == '\n') {
    318			this[i] = 0;
    319			skb_pull(skb, i + 1);
    320			return this;
    321		}
    322		if (!isprint(this[i]))
    323			return NULL;
    324	}
    325	return NULL;
    326}
    327
    328/*
    329 * Status packet has fields separated by \n, starting with a version number
    330 * for the information therein. Fields are....
    331 *
    332 *     packet version
    333 *     RxBitRate	(version >= 1)
    334 *     TxBitRate	(version >= 1)
    335 *     State		(version >= 1)
    336 *     LocalSNRMargin	(version >= 1)
    337 *     LocalLineAttn	(version >= 1)
    338 */       
    339static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
    340{
    341	char *str, *state_str, *snr, *attn;
    342	int ver, rate_up, rate_down, err;
    343
    344	if (!card->atmdev[port])
    345		return -ENODEV;
    346
    347	str = next_string(skb);
    348	if (!str)
    349		return -EIO;
    350
    351	err = kstrtoint(str, 10, &ver);
    352	if (err) {
    353		dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
    354		return err;
    355	}
    356	if (ver < 1) {
    357		dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
    358			 ver);
    359		return -EIO;
    360	}
    361
    362	str = next_string(skb);
    363	if (!str)
    364		return -EIO;
    365	if (!strcmp(str, "ERROR")) {
    366		dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
    367			 port);
    368		return 0;
    369	}
    370
    371	err = kstrtoint(str, 10, &rate_down);
    372	if (err)
    373		return err;
    374
    375	str = next_string(skb);
    376	if (!str)
    377		return -EIO;
    378	err = kstrtoint(str, 10, &rate_up);
    379	if (err)
    380		return err;
    381
    382	state_str = next_string(skb);
    383	if (!state_str)
    384		return -EIO;
    385
    386	/* Anything but 'Showtime' is down */
    387	if (strcmp(state_str, "Showtime")) {
    388		atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
    389		dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
    390		return 0;
    391	}
    392
    393	snr = next_string(skb);
    394	if (!snr)
    395		return -EIO;
    396	attn = next_string(skb);
    397	if (!attn)
    398		return -EIO;
    399
    400	dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
    401		 port, state_str, rate_down/1000, rate_up/1000,
    402		 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
    403	
    404	card->atmdev[port]->link_rate = rate_down / 424;
    405	atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
    406
    407	return 0;
    408}
    409
    410static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
    411{
    412	struct solos_param *prm;
    413	unsigned long flags;
    414	int cmdpid;
    415	int found = 0, err;
    416
    417	if (skb->len < 7)
    418		return 0;
    419
    420	if (skb->data[0] != 'L'    || !isdigit(skb->data[1]) ||
    421	    !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
    422	    !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
    423	    skb->data[6] != '\n')
    424		return 0;
    425
    426	err = kstrtoint(&skb->data[1], 10, &cmdpid);
    427	if (err)
    428		return err;
    429
    430	spin_lock_irqsave(&card->param_queue_lock, flags);
    431	list_for_each_entry(prm, &card->param_queue, list) {
    432		if (prm->port == port && prm->pid == cmdpid) {
    433			prm->response = skb;
    434			skb_pull(skb, 7);
    435			wake_up(&card->param_wq);
    436			found = 1;
    437			break;
    438		}
    439	}
    440	spin_unlock_irqrestore(&card->param_queue_lock, flags);
    441	return found;
    442}
    443
    444static ssize_t console_show(struct device *dev, struct device_attribute *attr,
    445			    char *buf)
    446{
    447	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
    448	struct solos_card *card = atmdev->dev_data;
    449	struct sk_buff *skb;
    450	unsigned int len;
    451
    452	spin_lock(&card->cli_queue_lock);
    453	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
    454	spin_unlock(&card->cli_queue_lock);
    455	if(skb == NULL)
    456		return sprintf(buf, "No data.\n");
    457
    458	len = skb->len;
    459	memcpy(buf, skb->data, len);
    460
    461	kfree_skb(skb);
    462	return len;
    463}
    464
    465static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
    466{
    467	struct sk_buff *skb;
    468	struct pkt_hdr *header;
    469
    470	if (size > (BUF_SIZE - sizeof(*header))) {
    471		dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
    472		return 0;
    473	}
    474	skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
    475	if (!skb) {
    476		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
    477		return 0;
    478	}
    479
    480	header = skb_put(skb, sizeof(*header));
    481
    482	header->size = cpu_to_le16(size);
    483	header->vpi = cpu_to_le16(0);
    484	header->vci = cpu_to_le16(0);
    485	header->type = cpu_to_le16(PKT_COMMAND);
    486
    487	skb_put_data(skb, buf, size);
    488
    489	fpga_queue(card, dev, skb, NULL);
    490
    491	return 0;
    492}
    493
    494static ssize_t console_store(struct device *dev, struct device_attribute *attr,
    495			     const char *buf, size_t count)
    496{
    497	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
    498	struct solos_card *card = atmdev->dev_data;
    499	int err;
    500
    501	err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
    502
    503	return err?:count;
    504}
    505
    506struct geos_gpio_attr {
    507	struct device_attribute attr;
    508	int offset;
    509};
    510
    511#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)	\
    512	struct geos_gpio_attr gpio_attr_##_name = {		\
    513		.attr = __ATTR(_name, _mode, _show, _store),	\
    514		.offset = _offset }
    515
    516static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
    517			       const char *buf, size_t count)
    518{
    519	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
    520	struct solos_card *card = dev_get_drvdata(dev);
    521	uint32_t data32;
    522
    523	if (count != 1 && (count != 2 || buf[1] != '\n'))
    524		return -EINVAL;
    525
    526	spin_lock_irq(&card->param_queue_lock);
    527	data32 = ioread32(card->config_regs + GPIO_STATUS);
    528	if (buf[0] == '1') {
    529		data32 |= 1 << gattr->offset;
    530		iowrite32(data32, card->config_regs + GPIO_STATUS);
    531	} else if (buf[0] == '0') {
    532		data32 &= ~(1 << gattr->offset);
    533		iowrite32(data32, card->config_regs + GPIO_STATUS);
    534	} else {
    535		count = -EINVAL;
    536	}
    537	spin_unlock_irq(&card->param_queue_lock);
    538	return count;
    539}
    540
    541static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
    542			      char *buf)
    543{
    544	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
    545	struct solos_card *card = dev_get_drvdata(dev);
    546	uint32_t data32;
    547
    548	data32 = ioread32(card->config_regs + GPIO_STATUS);
    549	data32 = (data32 >> gattr->offset) & 1;
    550
    551	return sprintf(buf, "%d\n", data32);
    552}
    553
    554static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
    555			     char *buf)
    556{
    557	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
    558	struct solos_card *card = dev_get_drvdata(dev);
    559	uint32_t data32;
    560
    561	data32 = ioread32(card->config_regs + GPIO_STATUS);
    562	switch (gattr->offset) {
    563	case 0:
    564		/* HardwareVersion */
    565		data32 = data32 & 0x1F;
    566		break;
    567	case 1:
    568		/* HardwareVariant */
    569		data32 = (data32 >> 5) & 0x0F;
    570		break;
    571	}
    572	return sprintf(buf, "%d\n", data32);
    573}
    574
    575static DEVICE_ATTR_RW(console);
    576
    577
    578#define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
    579#define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
    580
    581#include "solos-attrlist.c"
    582
    583static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
    584static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
    585static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
    586static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
    587static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
    588static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
    589static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
    590static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
    591#undef SOLOS_ATTR_RO
    592#undef SOLOS_ATTR_RW
    593
    594#define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
    595#define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
    596
    597static struct attribute *solos_attrs[] = {
    598#include "solos-attrlist.c"
    599	NULL
    600};
    601
    602static const struct attribute_group solos_attr_group = {
    603	.attrs = solos_attrs,
    604	.name = "parameters",
    605};
    606
    607static struct attribute *gpio_attrs[] = {
    608	&gpio_attr_GPIO1.attr.attr,
    609	&gpio_attr_GPIO2.attr.attr,
    610	&gpio_attr_GPIO3.attr.attr,
    611	&gpio_attr_GPIO4.attr.attr,
    612	&gpio_attr_GPIO5.attr.attr,
    613	&gpio_attr_PushButton.attr.attr,
    614	&gpio_attr_HardwareVersion.attr.attr,
    615	&gpio_attr_HardwareVariant.attr.attr,
    616	NULL
    617};
    618
    619static const struct attribute_group gpio_attr_group = {
    620	.attrs = gpio_attrs,
    621	.name = "gpio",
    622};
    623
    624static int flash_upgrade(struct solos_card *card, int chip)
    625{
    626	const struct firmware *fw;
    627	const char *fw_name;
    628	int blocksize = 0;
    629	int numblocks = 0;
    630	int offset;
    631
    632	switch (chip) {
    633	case 0:
    634		fw_name = "solos-FPGA.bin";
    635		if (card->atmel_flash)
    636			blocksize = ATMEL_FPGA_BLOCK;
    637		else
    638			blocksize = SPI_FLASH_BLOCK;
    639		break;
    640	case 1:
    641		fw_name = "solos-Firmware.bin";
    642		if (card->atmel_flash)
    643			blocksize = ATMEL_SOLOS_BLOCK;
    644		else
    645			blocksize = SPI_FLASH_BLOCK;
    646		break;
    647	case 2:
    648		if (card->fpga_version > LEGACY_BUFFERS){
    649			fw_name = "solos-db-FPGA.bin";
    650			if (card->atmel_flash)
    651				blocksize = ATMEL_FPGA_BLOCK;
    652			else
    653				blocksize = SPI_FLASH_BLOCK;
    654		} else {
    655			dev_info(&card->dev->dev, "FPGA version doesn't support"
    656					" daughter board upgrades\n");
    657			return -EPERM;
    658		}
    659		break;
    660	case 3:
    661		if (card->fpga_version > LEGACY_BUFFERS){
    662			fw_name = "solos-Firmware.bin";
    663			if (card->atmel_flash)
    664				blocksize = ATMEL_SOLOS_BLOCK;
    665			else
    666				blocksize = SPI_FLASH_BLOCK;
    667		} else {
    668			dev_info(&card->dev->dev, "FPGA version doesn't support"
    669					" daughter board upgrades\n");
    670			return -EPERM;
    671		}
    672		break;
    673	default:
    674		return -ENODEV;
    675	}
    676
    677	if (request_firmware(&fw, fw_name, &card->dev->dev))
    678		return -ENOENT;
    679
    680	dev_info(&card->dev->dev, "Flash upgrade starting\n");
    681
    682	/* New FPGAs require driver version before permitting flash upgrades */
    683	iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
    684
    685	numblocks = fw->size / blocksize;
    686	dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
    687	dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
    688	
    689	dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
    690	iowrite32(1, card->config_regs + FPGA_MODE);
    691	(void) ioread32(card->config_regs + FPGA_MODE); 
    692
    693	/* Set mode to Chip Erase */
    694	if(chip == 0 || chip == 2)
    695		dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
    696	if(chip == 1 || chip == 3)
    697		dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
    698	iowrite32((chip * 2), card->config_regs + FLASH_MODE);
    699
    700
    701	iowrite32(1, card->config_regs + WRITE_FLASH);
    702	wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
    703
    704	for (offset = 0; offset < fw->size; offset += blocksize) {
    705		int i;
    706
    707		/* Clear write flag */
    708		iowrite32(0, card->config_regs + WRITE_FLASH);
    709
    710		/* Set mode to Block Write */
    711		/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
    712		iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
    713
    714		/* Copy block to buffer, swapping each 16 bits for Atmel flash */
    715		for(i = 0; i < blocksize; i += 4) {
    716			uint32_t word;
    717			if (card->atmel_flash)
    718				word = swahb32p((uint32_t *)(fw->data + offset + i));
    719			else
    720				word = *(uint32_t *)(fw->data + offset + i);
    721			if(card->fpga_version > LEGACY_BUFFERS)
    722				iowrite32(word, FLASH_BUF + i);
    723			else
    724				iowrite32(word, RX_BUF(card, 3) + i);
    725		}
    726
    727		/* Specify block number and then trigger flash write */
    728		iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
    729		iowrite32(1, card->config_regs + WRITE_FLASH);
    730		wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
    731	}
    732
    733	release_firmware(fw);
    734	iowrite32(0, card->config_regs + WRITE_FLASH);
    735	iowrite32(0, card->config_regs + FPGA_MODE);
    736	iowrite32(0, card->config_regs + FLASH_MODE);
    737	dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
    738	return 0;
    739}
    740
    741static irqreturn_t solos_irq(int irq, void *dev_id)
    742{
    743	struct solos_card *card = dev_id;
    744	int handled = 1;
    745
    746	iowrite32(0, card->config_regs + IRQ_CLEAR);
    747
    748	/* If we're up and running, just kick the tasklet to process TX/RX */
    749	if (card->atmdev[0])
    750		tasklet_schedule(&card->tlet);
    751	else
    752		wake_up(&card->fw_wq);
    753
    754	return IRQ_RETVAL(handled);
    755}
    756
    757static void solos_bh(unsigned long card_arg)
    758{
    759	struct solos_card *card = (void *)card_arg;
    760	uint32_t card_flags;
    761	uint32_t rx_done = 0;
    762	int port;
    763
    764	/*
    765	 * Since fpga_tx() is going to need to read the flags under its lock,
    766	 * it can return them to us so that we don't have to hit PCI MMIO
    767	 * again for the same information
    768	 */
    769	card_flags = fpga_tx(card);
    770
    771	for (port = 0; port < card->nr_ports; port++) {
    772		if (card_flags & (0x10 << port)) {
    773			struct pkt_hdr _hdr, *header;
    774			struct sk_buff *skb;
    775			struct atm_vcc *vcc;
    776			int size;
    777
    778			if (card->using_dma) {
    779				skb = card->rx_skb[port];
    780				card->rx_skb[port] = NULL;
    781
    782				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
    783						 RX_DMA_SIZE, DMA_FROM_DEVICE);
    784
    785				header = (void *)skb->data;
    786				size = le16_to_cpu(header->size);
    787				skb_put(skb, size + sizeof(*header));
    788				skb_pull(skb, sizeof(*header));
    789			} else {
    790				header = &_hdr;
    791
    792				rx_done |= 0x10 << port;
    793
    794				memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
    795
    796				size = le16_to_cpu(header->size);
    797				if (size > (card->buffer_size - sizeof(*header))){
    798					dev_warn(&card->dev->dev, "Invalid buffer size\n");
    799					continue;
    800				}
    801
    802				/* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
    803				 * headroom, and ensures we can route packets back out an
    804				 * Ethernet interface (for example) without having to
    805				 * reallocate. Adding NET_IP_ALIGN also ensures that both
    806				 * PPPoATM and PPPoEoBR2684 packets end up aligned. */
    807				skb = netdev_alloc_skb_ip_align(NULL, size + 1);
    808				if (!skb) {
    809					if (net_ratelimit())
    810						dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
    811					continue;
    812				}
    813
    814				memcpy_fromio(skb_put(skb, size),
    815					      RX_BUF(card, port) + sizeof(*header),
    816					      size);
    817			}
    818			if (atmdebug) {
    819				dev_info(&card->dev->dev, "Received: port %d\n", port);
    820				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
    821					 size, le16_to_cpu(header->vpi),
    822					 le16_to_cpu(header->vci));
    823				print_buffer(skb);
    824			}
    825
    826			switch (le16_to_cpu(header->type)) {
    827			case PKT_DATA:
    828				vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
    829					       le16_to_cpu(header->vci));
    830				if (!vcc) {
    831					if (net_ratelimit())
    832						dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
    833							 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
    834							 port);
    835					dev_kfree_skb_any(skb);
    836					break;
    837				}
    838				atm_charge(vcc, skb->truesize);
    839				vcc->push(vcc, skb);
    840				atomic_inc(&vcc->stats->rx);
    841				break;
    842
    843			case PKT_STATUS:
    844				if (process_status(card, port, skb) &&
    845				    net_ratelimit()) {
    846					dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
    847					print_buffer(skb);
    848				}
    849				dev_kfree_skb_any(skb);
    850				break;
    851
    852			case PKT_COMMAND:
    853			default: /* FIXME: Not really, surely? */
    854				if (process_command(card, port, skb))
    855					break;
    856				spin_lock(&card->cli_queue_lock);
    857				if (skb_queue_len(&card->cli_queue[port]) > 10) {
    858					if (net_ratelimit())
    859						dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
    860							 port);
    861					dev_kfree_skb_any(skb);
    862				} else
    863					skb_queue_tail(&card->cli_queue[port], skb);
    864				spin_unlock(&card->cli_queue_lock);
    865				break;
    866			}
    867		}
    868		/* Allocate RX skbs for any ports which need them */
    869		if (card->using_dma && card->atmdev[port] &&
    870		    !card->rx_skb[port]) {
    871			/* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
    872			 * here; the FPGA can only DMA to addresses which are
    873			 * aligned to 4 bytes. */
    874			struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
    875			if (skb) {
    876				SKB_CB(skb)->dma_addr =
    877					dma_map_single(&card->dev->dev, skb->data,
    878						       RX_DMA_SIZE, DMA_FROM_DEVICE);
    879				iowrite32(SKB_CB(skb)->dma_addr,
    880					  card->config_regs + RX_DMA_ADDR(port));
    881				card->rx_skb[port] = skb;
    882			} else {
    883				if (net_ratelimit())
    884					dev_warn(&card->dev->dev, "Failed to allocate RX skb");
    885
    886				/* We'll have to try again later */
    887				tasklet_schedule(&card->tlet);
    888			}
    889		}
    890	}
    891	if (rx_done)
    892		iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
    893
    894	return;
    895}
    896
    897static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
    898{
    899	struct hlist_head *head;
    900	struct atm_vcc *vcc = NULL;
    901	struct sock *s;
    902
    903	read_lock(&vcc_sklist_lock);
    904	head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
    905	sk_for_each(s, head) {
    906		vcc = atm_sk(s);
    907		if (vcc->dev == dev && vcc->vci == vci &&
    908		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
    909		    test_bit(ATM_VF_READY, &vcc->flags))
    910			goto out;
    911	}
    912	vcc = NULL;
    913 out:
    914	read_unlock(&vcc_sklist_lock);
    915	return vcc;
    916}
    917
    918static int popen(struct atm_vcc *vcc)
    919{
    920	struct solos_card *card = vcc->dev->dev_data;
    921	struct sk_buff *skb;
    922	struct pkt_hdr *header;
    923
    924	if (vcc->qos.aal != ATM_AAL5) {
    925		dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
    926			 vcc->qos.aal);
    927		return -EINVAL;
    928	}
    929
    930	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
    931	if (!skb) {
    932		if (net_ratelimit())
    933			dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
    934		return -ENOMEM;
    935	}
    936	header = skb_put(skb, sizeof(*header));
    937
    938	header->size = cpu_to_le16(0);
    939	header->vpi = cpu_to_le16(vcc->vpi);
    940	header->vci = cpu_to_le16(vcc->vci);
    941	header->type = cpu_to_le16(PKT_POPEN);
    942
    943	fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
    944
    945	set_bit(ATM_VF_ADDR, &vcc->flags);
    946	set_bit(ATM_VF_READY, &vcc->flags);
    947
    948	return 0;
    949}
    950
    951static void pclose(struct atm_vcc *vcc)
    952{
    953	struct solos_card *card = vcc->dev->dev_data;
    954	unsigned char port = SOLOS_CHAN(vcc->dev);
    955	struct sk_buff *skb, *tmpskb;
    956	struct pkt_hdr *header;
    957
    958	/* Remove any yet-to-be-transmitted packets from the pending queue */
    959	spin_lock(&card->tx_queue_lock);
    960	skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
    961		if (SKB_CB(skb)->vcc == vcc) {
    962			skb_unlink(skb, &card->tx_queue[port]);
    963			solos_pop(vcc, skb);
    964		}
    965	}
    966	spin_unlock(&card->tx_queue_lock);
    967
    968	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
    969	if (!skb) {
    970		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
    971		return;
    972	}
    973	header = skb_put(skb, sizeof(*header));
    974
    975	header->size = cpu_to_le16(0);
    976	header->vpi = cpu_to_le16(vcc->vpi);
    977	header->vci = cpu_to_le16(vcc->vci);
    978	header->type = cpu_to_le16(PKT_PCLOSE);
    979
    980	skb_get(skb);
    981	fpga_queue(card, port, skb, NULL);
    982
    983	if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
    984		dev_warn(&card->dev->dev,
    985			 "Timeout waiting for VCC close on port %d\n", port);
    986
    987	dev_kfree_skb(skb);
    988
    989	/* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
    990	   tasklet has finished processing any incoming packets (and, more to
    991	   the point, using the vcc pointer). */
    992	tasklet_unlock_wait(&card->tlet);
    993
    994	clear_bit(ATM_VF_ADDR, &vcc->flags);
    995
    996	return;
    997}
    998
    999static int print_buffer(struct sk_buff *buf)
   1000{
   1001	int len,i;
   1002	char msg[500];
   1003	char item[10];
   1004
   1005	len = buf->len;
   1006	for (i = 0; i < len; i++){
   1007		if(i % 8 == 0)
   1008			sprintf(msg, "%02X: ", i);
   1009
   1010		sprintf(item,"%02X ",*(buf->data + i));
   1011		strcat(msg, item);
   1012		if(i % 8 == 7) {
   1013			sprintf(item, "\n");
   1014			strcat(msg, item);
   1015			printk(KERN_DEBUG "%s", msg);
   1016		}
   1017	}
   1018	if (i % 8 != 0) {
   1019		sprintf(item, "\n");
   1020		strcat(msg, item);
   1021		printk(KERN_DEBUG "%s", msg);
   1022	}
   1023	printk(KERN_DEBUG "\n");
   1024
   1025	return 0;
   1026}
   1027
   1028static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
   1029		       struct atm_vcc *vcc)
   1030{
   1031	int old_len;
   1032	unsigned long flags;
   1033
   1034	SKB_CB(skb)->vcc = vcc;
   1035
   1036	spin_lock_irqsave(&card->tx_queue_lock, flags);
   1037	old_len = skb_queue_len(&card->tx_queue[port]);
   1038	skb_queue_tail(&card->tx_queue[port], skb);
   1039	if (!old_len)
   1040		card->tx_mask |= (1 << port);
   1041	spin_unlock_irqrestore(&card->tx_queue_lock, flags);
   1042
   1043	/* Theoretically we could just schedule the tasklet here, but
   1044	   that introduces latency we don't want -- it's noticeable */
   1045	if (!old_len)
   1046		fpga_tx(card);
   1047}
   1048
   1049static uint32_t fpga_tx(struct solos_card *card)
   1050{
   1051	uint32_t tx_pending, card_flags;
   1052	uint32_t tx_started = 0;
   1053	struct sk_buff *skb;
   1054	struct atm_vcc *vcc;
   1055	unsigned char port;
   1056	unsigned long flags;
   1057
   1058	spin_lock_irqsave(&card->tx_lock, flags);
   1059	
   1060	card_flags = ioread32(card->config_regs + FLAGS_ADDR);
   1061	/*
   1062	 * The queue lock is required for _writing_ to tx_mask, but we're
   1063	 * OK to read it here without locking. The only potential update
   1064	 * that we could race with is in fpga_queue() where it sets a bit
   1065	 * for a new port... but it's going to call this function again if
   1066	 * it's doing that, anyway.
   1067	 */
   1068	tx_pending = card->tx_mask & ~card_flags;
   1069
   1070	for (port = 0; tx_pending; tx_pending >>= 1, port++) {
   1071		if (tx_pending & 1) {
   1072			struct sk_buff *oldskb = card->tx_skb[port];
   1073			if (oldskb) {
   1074				dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
   1075						 oldskb->len, DMA_TO_DEVICE);
   1076				card->tx_skb[port] = NULL;
   1077			}
   1078			spin_lock(&card->tx_queue_lock);
   1079			skb = skb_dequeue(&card->tx_queue[port]);
   1080			if (!skb)
   1081				card->tx_mask &= ~(1 << port);
   1082			spin_unlock(&card->tx_queue_lock);
   1083
   1084			if (skb && !card->using_dma) {
   1085				memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
   1086				tx_started |= 1 << port;
   1087				oldskb = skb; /* We're done with this skb already */
   1088			} else if (skb && card->using_dma) {
   1089				unsigned char *data = skb->data;
   1090				if ((unsigned long)data & card->dma_alignment) {
   1091					data = card->dma_bounce + (BUF_SIZE * port);
   1092					memcpy(data, skb->data, skb->len);
   1093				}
   1094				SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
   1095								       skb->len, DMA_TO_DEVICE);
   1096				card->tx_skb[port] = skb;
   1097				iowrite32(SKB_CB(skb)->dma_addr,
   1098					  card->config_regs + TX_DMA_ADDR(port));
   1099			}
   1100
   1101			if (!oldskb)
   1102				continue;
   1103
   1104			/* Clean up and free oldskb now it's gone */
   1105			if (atmdebug) {
   1106				struct pkt_hdr *header = (void *)oldskb->data;
   1107				int size = le16_to_cpu(header->size);
   1108
   1109				skb_pull(oldskb, sizeof(*header));
   1110				dev_info(&card->dev->dev, "Transmitted: port %d\n",
   1111					 port);
   1112				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
   1113					 size, le16_to_cpu(header->vpi),
   1114					 le16_to_cpu(header->vci));
   1115				print_buffer(oldskb);
   1116			}
   1117
   1118			vcc = SKB_CB(oldskb)->vcc;
   1119
   1120			if (vcc) {
   1121				atomic_inc(&vcc->stats->tx);
   1122				solos_pop(vcc, oldskb);
   1123			} else {
   1124				dev_kfree_skb_irq(oldskb);
   1125				wake_up(&card->param_wq);
   1126			}
   1127		}
   1128	}
   1129	/* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
   1130	if (tx_started)
   1131		iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
   1132
   1133	spin_unlock_irqrestore(&card->tx_lock, flags);
   1134	return card_flags;
   1135}
   1136
   1137static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
   1138{
   1139	struct solos_card *card = vcc->dev->dev_data;
   1140	struct pkt_hdr *header;
   1141	int pktlen;
   1142
   1143	pktlen = skb->len;
   1144	if (pktlen > (BUF_SIZE - sizeof(*header))) {
   1145		dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
   1146		solos_pop(vcc, skb);
   1147		return 0;
   1148	}
   1149
   1150	if (!skb_clone_writable(skb, sizeof(*header))) {
   1151		int expand_by = 0;
   1152		int ret;
   1153
   1154		if (skb_headroom(skb) < sizeof(*header))
   1155			expand_by = sizeof(*header) - skb_headroom(skb);
   1156
   1157		ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
   1158		if (ret) {
   1159			dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
   1160			solos_pop(vcc, skb);
   1161			return ret;
   1162		}
   1163	}
   1164
   1165	header = skb_push(skb, sizeof(*header));
   1166
   1167	/* This does _not_ include the size of the header */
   1168	header->size = cpu_to_le16(pktlen);
   1169	header->vpi = cpu_to_le16(vcc->vpi);
   1170	header->vci = cpu_to_le16(vcc->vci);
   1171	header->type = cpu_to_le16(PKT_DATA);
   1172
   1173	fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
   1174
   1175	return 0;
   1176}
   1177
   1178static const struct atmdev_ops fpga_ops = {
   1179	.open =		popen,
   1180	.close =	pclose,
   1181	.ioctl =	NULL,
   1182	.send =		psend,
   1183	.send_oam =	NULL,
   1184	.phy_put =	NULL,
   1185	.phy_get =	NULL,
   1186	.change_qos =	NULL,
   1187	.proc_read =	NULL,
   1188	.owner =	THIS_MODULE
   1189};
   1190
   1191static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
   1192{
   1193	int err;
   1194	uint16_t fpga_ver;
   1195	uint8_t major_ver, minor_ver;
   1196	uint32_t data32;
   1197	struct solos_card *card;
   1198
   1199	card = kzalloc(sizeof(*card), GFP_KERNEL);
   1200	if (!card)
   1201		return -ENOMEM;
   1202
   1203	card->dev = dev;
   1204	init_waitqueue_head(&card->fw_wq);
   1205	init_waitqueue_head(&card->param_wq);
   1206
   1207	err = pci_enable_device(dev);
   1208	if (err) {
   1209		dev_warn(&dev->dev,  "Failed to enable PCI device\n");
   1210		goto out;
   1211	}
   1212
   1213	err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
   1214	if (err) {
   1215		dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
   1216		goto out;
   1217	}
   1218
   1219	err = pci_request_regions(dev, "solos");
   1220	if (err) {
   1221		dev_warn(&dev->dev, "Failed to request regions\n");
   1222		goto out;
   1223	}
   1224
   1225	card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
   1226	if (!card->config_regs) {
   1227		dev_warn(&dev->dev, "Failed to ioremap config registers\n");
   1228		err = -ENOMEM;
   1229		goto out_release_regions;
   1230	}
   1231	card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
   1232	if (!card->buffers) {
   1233		dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
   1234		err = -ENOMEM;
   1235		goto out_unmap_config;
   1236	}
   1237
   1238	if (reset) {
   1239		iowrite32(1, card->config_regs + FPGA_MODE);
   1240		ioread32(card->config_regs + FPGA_MODE);
   1241
   1242		iowrite32(0, card->config_regs + FPGA_MODE);
   1243		ioread32(card->config_regs + FPGA_MODE);
   1244	}
   1245
   1246	data32 = ioread32(card->config_regs + FPGA_VER);
   1247	fpga_ver = (data32 & 0x0000FFFF);
   1248	major_ver = ((data32 & 0xFF000000) >> 24);
   1249	minor_ver = ((data32 & 0x00FF0000) >> 16);
   1250	card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
   1251	if (card->fpga_version > LEGACY_BUFFERS)
   1252		card->buffer_size = BUF_SIZE;
   1253	else
   1254		card->buffer_size = OLD_BUF_SIZE;
   1255	dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
   1256		 major_ver, minor_ver, fpga_ver);
   1257
   1258	if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
   1259			      db_fpga_upgrade || db_firmware_upgrade)) {
   1260		dev_warn(&dev->dev,
   1261			 "FPGA too old; cannot upgrade flash. Use JTAG.\n");
   1262		fpga_upgrade = firmware_upgrade = 0;
   1263		db_fpga_upgrade = db_firmware_upgrade = 0;
   1264	}
   1265
   1266	/* Stopped using Atmel flash after 0.03-38 */
   1267	if (fpga_ver < 39)
   1268		card->atmel_flash = 1;
   1269	else
   1270		card->atmel_flash = 0;
   1271
   1272	data32 = ioread32(card->config_regs + PORTS);
   1273	card->nr_ports = (data32 & 0x000000FF);
   1274
   1275	if (card->fpga_version >= DMA_SUPPORTED) {
   1276		pci_set_master(dev);
   1277		card->using_dma = 1;
   1278		if (1) { /* All known FPGA versions so far */
   1279			card->dma_alignment = 3;
   1280			card->dma_bounce = kmalloc_array(card->nr_ports,
   1281							 BUF_SIZE, GFP_KERNEL);
   1282			if (!card->dma_bounce) {
   1283				dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
   1284				err = -ENOMEM;
   1285				/* Fallback to MMIO doesn't work */
   1286				goto out_unmap_both;
   1287			}
   1288		}
   1289	} else {
   1290		card->using_dma = 0;
   1291		/* Set RX empty flag for all ports */
   1292		iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
   1293	}
   1294
   1295	pci_set_drvdata(dev, card);
   1296
   1297	tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
   1298	spin_lock_init(&card->tx_lock);
   1299	spin_lock_init(&card->tx_queue_lock);
   1300	spin_lock_init(&card->cli_queue_lock);
   1301	spin_lock_init(&card->param_queue_lock);
   1302	INIT_LIST_HEAD(&card->param_queue);
   1303
   1304	err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
   1305			  "solos-pci", card);
   1306	if (err) {
   1307		dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
   1308		goto out_unmap_both;
   1309	}
   1310
   1311	iowrite32(1, card->config_regs + IRQ_EN_ADDR);
   1312
   1313	if (fpga_upgrade)
   1314		flash_upgrade(card, 0);
   1315
   1316	if (firmware_upgrade)
   1317		flash_upgrade(card, 1);
   1318
   1319	if (db_fpga_upgrade)
   1320		flash_upgrade(card, 2);
   1321
   1322	if (db_firmware_upgrade)
   1323		flash_upgrade(card, 3);
   1324
   1325	err = atm_init(card, &dev->dev);
   1326	if (err)
   1327		goto out_free_irq;
   1328
   1329	if (card->fpga_version >= DMA_SUPPORTED &&
   1330	    sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
   1331		dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
   1332
   1333	return 0;
   1334
   1335 out_free_irq:
   1336	iowrite32(0, card->config_regs + IRQ_EN_ADDR);
   1337	free_irq(dev->irq, card);
   1338	tasklet_kill(&card->tlet);
   1339	
   1340 out_unmap_both:
   1341	kfree(card->dma_bounce);
   1342	pci_iounmap(dev, card->buffers);
   1343 out_unmap_config:
   1344	pci_iounmap(dev, card->config_regs);
   1345 out_release_regions:
   1346	pci_release_regions(dev);
   1347 out:
   1348	kfree(card);
   1349	return err;
   1350}
   1351
   1352static int atm_init(struct solos_card *card, struct device *parent)
   1353{
   1354	int i;
   1355
   1356	for (i = 0; i < card->nr_ports; i++) {
   1357		struct sk_buff *skb;
   1358		struct pkt_hdr *header;
   1359
   1360		skb_queue_head_init(&card->tx_queue[i]);
   1361		skb_queue_head_init(&card->cli_queue[i]);
   1362
   1363		card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
   1364		if (!card->atmdev[i]) {
   1365			dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
   1366			atm_remove(card);
   1367			return -ENODEV;
   1368		}
   1369		if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
   1370			dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
   1371		if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
   1372			dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
   1373
   1374		dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
   1375
   1376		card->atmdev[i]->ci_range.vpi_bits = 8;
   1377		card->atmdev[i]->ci_range.vci_bits = 16;
   1378		card->atmdev[i]->dev_data = card;
   1379		card->atmdev[i]->phy_data = (void *)(unsigned long)i;
   1380		atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
   1381
   1382		skb = alloc_skb(sizeof(*header), GFP_KERNEL);
   1383		if (!skb) {
   1384			dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
   1385			continue;
   1386		}
   1387
   1388		header = skb_put(skb, sizeof(*header));
   1389
   1390		header->size = cpu_to_le16(0);
   1391		header->vpi = cpu_to_le16(0);
   1392		header->vci = cpu_to_le16(0);
   1393		header->type = cpu_to_le16(PKT_STATUS);
   1394
   1395		fpga_queue(card, i, skb, NULL);
   1396	}
   1397	return 0;
   1398}
   1399
   1400static void atm_remove(struct solos_card *card)
   1401{
   1402	int i;
   1403
   1404	for (i = 0; i < card->nr_ports; i++) {
   1405		if (card->atmdev[i]) {
   1406			struct sk_buff *skb;
   1407
   1408			dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
   1409
   1410			sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
   1411			atm_dev_deregister(card->atmdev[i]);
   1412
   1413			skb = card->rx_skb[i];
   1414			if (skb) {
   1415				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
   1416						 RX_DMA_SIZE, DMA_FROM_DEVICE);
   1417				dev_kfree_skb(skb);
   1418			}
   1419			skb = card->tx_skb[i];
   1420			if (skb) {
   1421				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
   1422						 skb->len, DMA_TO_DEVICE);
   1423				dev_kfree_skb(skb);
   1424			}
   1425			while ((skb = skb_dequeue(&card->tx_queue[i])))
   1426				dev_kfree_skb(skb);
   1427 
   1428		}
   1429	}
   1430}
   1431
   1432static void fpga_remove(struct pci_dev *dev)
   1433{
   1434	struct solos_card *card = pci_get_drvdata(dev);
   1435	
   1436	/* Disable IRQs */
   1437	iowrite32(0, card->config_regs + IRQ_EN_ADDR);
   1438
   1439	/* Reset FPGA */
   1440	iowrite32(1, card->config_regs + FPGA_MODE);
   1441	(void)ioread32(card->config_regs + FPGA_MODE); 
   1442
   1443	if (card->fpga_version >= DMA_SUPPORTED)
   1444		sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
   1445
   1446	atm_remove(card);
   1447
   1448	free_irq(dev->irq, card);
   1449	tasklet_kill(&card->tlet);
   1450
   1451	kfree(card->dma_bounce);
   1452
   1453	/* Release device from reset */
   1454	iowrite32(0, card->config_regs + FPGA_MODE);
   1455	(void)ioread32(card->config_regs + FPGA_MODE); 
   1456
   1457	pci_iounmap(dev, card->buffers);
   1458	pci_iounmap(dev, card->config_regs);
   1459
   1460	pci_release_regions(dev);
   1461	pci_disable_device(dev);
   1462
   1463	kfree(card);
   1464}
   1465
   1466static const struct pci_device_id fpga_pci_tbl[] = {
   1467	{ 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
   1468	{ 0, }
   1469};
   1470
   1471MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
   1472
   1473static struct pci_driver fpga_driver = {
   1474	.name =		"solos",
   1475	.id_table =	fpga_pci_tbl,
   1476	.probe =	fpga_probe,
   1477	.remove =	fpga_remove,
   1478};
   1479
   1480
   1481static int __init solos_pci_init(void)
   1482{
   1483	BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
   1484
   1485	printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
   1486	return pci_register_driver(&fpga_driver);
   1487}
   1488
   1489static void __exit solos_pci_exit(void)
   1490{
   1491	pci_unregister_driver(&fpga_driver);
   1492	printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
   1493}
   1494
   1495module_init(solos_pci_init);
   1496module_exit(solos_pci_exit);