aten.c (3343B)
1/* 2 aten.c (c) 1997-8 Grant R. Guenther <grant@torque.net> 3 Under the terms of the GNU General Public License. 4 5 aten.c is a low-level protocol driver for the ATEN EH-100 6 parallel port adapter. The EH-100 supports 4-bit and 8-bit 7 modes only. There is also an EH-132 which supports EPP mode 8 transfers. The EH-132 is not yet supported. 9 10*/ 11 12/* Changes: 13 14 1.01 GRG 1998.05.05 init_proto, release_proto 15 16*/ 17 18#define ATEN_VERSION "1.01" 19 20#include <linux/module.h> 21#include <linux/init.h> 22#include <linux/delay.h> 23#include <linux/kernel.h> 24#include <linux/wait.h> 25#include <linux/types.h> 26#include <asm/io.h> 27 28#include "paride.h" 29 30#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88) 31 32/* cont = 0 - access the IDE register file 33 cont = 1 - access the IDE command set 34*/ 35 36static int cont_map[2] = { 0x08, 0x20 }; 37 38static void aten_write_regr( PIA *pi, int cont, int regr, int val) 39 40{ int r; 41 42 r = regr + cont_map[cont] + 0x80; 43 44 w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc); 45} 46 47static int aten_read_regr( PIA *pi, int cont, int regr ) 48 49{ int a, b, r; 50 51 r = regr + cont_map[cont] + 0x40; 52 53 switch (pi->mode) { 54 55 case 0: w0(r); w2(0xe); w2(6); 56 w2(7); w2(6); w2(0); 57 a = r1(); w0(0x10); b = r1(); w2(0xc); 58 return j44(a,b); 59 60 case 1: r |= 0x10; 61 w0(r); w2(0xe); w2(6); w0(0xff); 62 w2(0x27); w2(0x26); w2(0x20); 63 a = r0(); 64 w2(0x26); w2(0xc); 65 return a; 66 } 67 return -1; 68} 69 70static void aten_read_block( PIA *pi, char * buf, int count ) 71 72{ int k, a, b, c, d; 73 74 switch (pi->mode) { 75 76 case 0: w0(0x48); w2(0xe); w2(6); 77 for (k=0;k<count/2;k++) { 78 w2(7); w2(6); w2(2); 79 a = r1(); w0(0x58); b = r1(); 80 w2(0); d = r1(); w0(0x48); c = r1(); 81 buf[2*k] = j44(c,d); 82 buf[2*k+1] = j44(a,b); 83 } 84 w2(0xc); 85 break; 86 87 case 1: w0(0x58); w2(0xe); w2(6); 88 for (k=0;k<count/2;k++) { 89 w2(0x27); w2(0x26); w2(0x22); 90 a = r0(); w2(0x20); b = r0(); 91 buf[2*k] = b; buf[2*k+1] = a; 92 } 93 w2(0x26); w2(0xc); 94 break; 95 } 96} 97 98static void aten_write_block( PIA *pi, char * buf, int count ) 99 100{ int k; 101 102 w0(0x88); w2(0xe); w2(6); 103 for (k=0;k<count/2;k++) { 104 w0(buf[2*k+1]); w2(0xe); w2(6); 105 w0(buf[2*k]); w2(7); w2(6); 106 } 107 w2(0xc); 108} 109 110static void aten_connect ( PIA *pi ) 111 112{ pi->saved_r0 = r0(); 113 pi->saved_r2 = r2(); 114 w2(0xc); 115} 116 117static void aten_disconnect ( PIA *pi ) 118 119{ w0(pi->saved_r0); 120 w2(pi->saved_r2); 121} 122 123static void aten_log_adapter( PIA *pi, char * scratch, int verbose ) 124 125{ char *mode_string[2] = {"4-bit","8-bit"}; 126 127 printk("%s: aten %s, ATEN EH-100 at 0x%x, ", 128 pi->device,ATEN_VERSION,pi->port); 129 printk("mode %d (%s), delay %d\n",pi->mode, 130 mode_string[pi->mode],pi->delay); 131 132} 133 134static struct pi_protocol aten = { 135 .owner = THIS_MODULE, 136 .name = "aten", 137 .max_mode = 2, 138 .epp_first = 2, 139 .default_delay = 1, 140 .max_units = 1, 141 .write_regr = aten_write_regr, 142 .read_regr = aten_read_regr, 143 .write_block = aten_write_block, 144 .read_block = aten_read_block, 145 .connect = aten_connect, 146 .disconnect = aten_disconnect, 147 .log_adapter = aten_log_adapter, 148}; 149 150static int __init aten_init(void) 151{ 152 return paride_register(&aten); 153} 154 155static void __exit aten_exit(void) 156{ 157 paride_unregister( &aten ); 158} 159 160MODULE_LICENSE("GPL"); 161module_init(aten_init) 162module_exit(aten_exit)