cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

pd.c (25980B)


      1/* 
      2        pd.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
      3                            Under the terms of the GNU General Public License.
      4
      5        This is the high-level driver for parallel port IDE hard
      6        drives based on chips supported by the paride module.
      7
      8	By default, the driver will autoprobe for a single parallel
      9	port IDE drive, but if their individual parameters are
     10        specified, the driver can handle up to 4 drives.
     11
     12        The behaviour of the pd driver can be altered by setting
     13        some parameters from the insmod command line.  The following
     14        parameters are adjustable:
     15 
     16	    drive0  	These four arguments can be arrays of	    
     17	    drive1	1-8 integers as follows:
     18	    drive2
     19	    drive3	<prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
     20
     21			Where,
     22
     23		<prt>	is the base of the parallel port address for
     24			the corresponding drive.  (required)
     25
     26		<pro>   is the protocol number for the adapter that
     27			supports this drive.  These numbers are
     28                        logged by 'paride' when the protocol modules
     29			are initialised.  (0 if not given)
     30
     31		<uni>   for those adapters that support chained
     32			devices, this is the unit selector for the
     33		        chain of devices on the given port.  It should
     34			be zero for devices that don't support chaining.
     35			(0 if not given)
     36
     37		<mod>   this can be -1 to choose the best mode, or one
     38		        of the mode numbers supported by the adapter.
     39			(-1 if not given)
     40
     41		<geo>   this defaults to 0 to indicate that the driver
     42			should use the CHS geometry provided by the drive
     43			itself.  If set to 1, the driver will provide
     44			a logical geometry with 64 heads and 32 sectors
     45			per track, to be consistent with most SCSI
     46		        drivers.  (0 if not given)
     47
     48		<sby>   set this to zero to disable the power saving
     49			standby mode, if needed.  (1 if not given)
     50
     51		<dly>   some parallel ports require the driver to 
     52			go more slowly.  -1 sets a default value that
     53			should work with the chosen protocol.  Otherwise,
     54			set this to a small integer, the larger it is
     55			the slower the port i/o.  In some cases, setting
     56			this to zero will speed up the device. (default -1)
     57
     58		<slv>   IDE disks can be jumpered to master or slave.
     59                        Set this to 0 to choose the master drive, 1 to
     60                        choose the slave, -1 (the default) to choose the
     61                        first drive found.
     62			
     63
     64            major       You may use this parameter to override the
     65                        default major number (45) that this driver
     66                        will use.  Be sure to change the device
     67                        name as well.
     68
     69            name        This parameter is a character string that
     70                        contains the name the kernel will use for this
     71                        device (in /proc output, for instance).
     72			(default "pd")
     73
     74	    cluster	The driver will attempt to aggregate requests
     75			for adjacent blocks into larger multi-block
     76			clusters.  The maximum cluster size (in 512
     77			byte sectors) is set with this parameter.
     78			(default 64)
     79
     80	    verbose	This parameter controls the amount of logging
     81			that the driver will do.  Set it to 0 for 
     82			normal operation, 1 to see autoprobe progress
     83			messages, or 2 to see additional debugging
     84			output.  (default 0)
     85
     86            nice        This parameter controls the driver's use of
     87                        idle CPU time, at the expense of some speed.
     88
     89        If this driver is built into the kernel, you can use kernel
     90        the following command line parameters, with the same values
     91        as the corresponding module parameters listed above:
     92
     93            pd.drive0
     94            pd.drive1
     95            pd.drive2
     96            pd.drive3
     97            pd.cluster
     98            pd.nice
     99
    100        In addition, you can use the parameter pd.disable to disable
    101        the driver entirely.
    102 
    103*/
    104
    105/* Changes:
    106
    107	1.01	GRG 1997.01.24	Restored pd_reset()
    108				Added eject ioctl
    109	1.02    GRG 1998.05.06  SMP spinlock changes, 
    110				Added slave support
    111	1.03    GRG 1998.06.16  Eliminate an Ugh.
    112	1.04	GRG 1998.08.15  Extra debugging, use HZ in loop timing
    113	1.05    GRG 1998.09.24  Added jumbo support
    114
    115*/
    116
    117#define PD_VERSION      "1.05"
    118#define PD_MAJOR	45
    119#define PD_NAME		"pd"
    120#define PD_UNITS	4
    121
    122/* Here are things one can override from the insmod command.
    123   Most are autoprobed by paride unless set here.  Verbose is off
    124   by default.
    125
    126*/
    127#include <linux/types.h>
    128
    129static int verbose = 0;
    130static int major = PD_MAJOR;
    131static char *name = PD_NAME;
    132static int cluster = 64;
    133static int nice = 0;
    134static int disable = 0;
    135
    136static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
    137static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
    138static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
    139static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
    140
    141static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
    142
    143enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
    144
    145/* end of parameters */
    146
    147#include <linux/init.h>
    148#include <linux/module.h>
    149#include <linux/gfp.h>
    150#include <linux/fs.h>
    151#include <linux/delay.h>
    152#include <linux/hdreg.h>
    153#include <linux/cdrom.h>	/* for the eject ioctl */
    154#include <linux/blk-mq.h>
    155#include <linux/blkpg.h>
    156#include <linux/kernel.h>
    157#include <linux/mutex.h>
    158#include <linux/uaccess.h>
    159#include <linux/workqueue.h>
    160
    161static DEFINE_MUTEX(pd_mutex);
    162static DEFINE_SPINLOCK(pd_lock);
    163
    164module_param(verbose, int, 0);
    165module_param(major, int, 0);
    166module_param(name, charp, 0);
    167module_param(cluster, int, 0);
    168module_param(nice, int, 0);
    169module_param_array(drive0, int, NULL, 0);
    170module_param_array(drive1, int, NULL, 0);
    171module_param_array(drive2, int, NULL, 0);
    172module_param_array(drive3, int, NULL, 0);
    173
    174#include "paride.h"
    175
    176#define PD_BITS    4
    177
    178/* numbers for "SCSI" geometry */
    179
    180#define PD_LOG_HEADS    64
    181#define PD_LOG_SECTS    32
    182
    183#define PD_ID_OFF       54
    184#define PD_ID_LEN       14
    185
    186#define PD_MAX_RETRIES  5
    187#define PD_TMO          800	/* interrupt timeout in jiffies */
    188#define PD_SPIN_DEL     50	/* spin delay in micro-seconds  */
    189
    190#define PD_SPIN         (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
    191
    192#define STAT_ERR        0x00001
    193#define STAT_INDEX      0x00002
    194#define STAT_ECC        0x00004
    195#define STAT_DRQ        0x00008
    196#define STAT_SEEK       0x00010
    197#define STAT_WRERR      0x00020
    198#define STAT_READY      0x00040
    199#define STAT_BUSY       0x00080
    200
    201#define ERR_AMNF        0x00100
    202#define ERR_TK0NF       0x00200
    203#define ERR_ABRT        0x00400
    204#define ERR_MCR         0x00800
    205#define ERR_IDNF        0x01000
    206#define ERR_MC          0x02000
    207#define ERR_UNC         0x04000
    208#define ERR_TMO         0x10000
    209
    210#define IDE_READ        	0x20
    211#define IDE_WRITE       	0x30
    212#define IDE_READ_VRFY		0x40
    213#define IDE_INIT_DEV_PARMS	0x91
    214#define IDE_STANDBY     	0x96
    215#define IDE_ACKCHANGE   	0xdb
    216#define IDE_DOORLOCK    	0xde
    217#define IDE_DOORUNLOCK  	0xdf
    218#define IDE_IDENTIFY    	0xec
    219#define IDE_EJECT		0xed
    220
    221#define PD_NAMELEN	8
    222
    223struct pd_unit {
    224	struct pi_adapter pia;	/* interface to paride layer */
    225	struct pi_adapter *pi;
    226	int access;		/* count of active opens ... */
    227	int capacity;		/* Size of this volume in sectors */
    228	int heads;		/* physical geometry */
    229	int sectors;
    230	int cylinders;
    231	int can_lba;
    232	int drive;		/* master=0 slave=1 */
    233	int changed;		/* Have we seen a disk change ? */
    234	int removable;		/* removable media device  ?  */
    235	int standby;
    236	int alt_geom;
    237	char name[PD_NAMELEN];	/* pda, pdb, etc ... */
    238	struct gendisk *gd;
    239	struct blk_mq_tag_set tag_set;
    240	struct list_head rq_list;
    241};
    242
    243static struct pd_unit pd[PD_UNITS];
    244
    245struct pd_req {
    246	/* for REQ_OP_DRV_IN: */
    247	enum action (*func)(struct pd_unit *disk);
    248};
    249
    250static char pd_scratch[512];	/* scratch block buffer */
    251
    252static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
    253	"READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
    254	"IDNF", "MC", "UNC", "???", "TMO"
    255};
    256
    257static void *par_drv;		/* reference of parport driver */
    258
    259static inline int status_reg(struct pd_unit *disk)
    260{
    261	return pi_read_regr(disk->pi, 1, 6);
    262}
    263
    264static inline int read_reg(struct pd_unit *disk, int reg)
    265{
    266	return pi_read_regr(disk->pi, 0, reg);
    267}
    268
    269static inline void write_status(struct pd_unit *disk, int val)
    270{
    271	pi_write_regr(disk->pi, 1, 6, val);
    272}
    273
    274static inline void write_reg(struct pd_unit *disk, int reg, int val)
    275{
    276	pi_write_regr(disk->pi, 0, reg, val);
    277}
    278
    279static inline u8 DRIVE(struct pd_unit *disk)
    280{
    281	return 0xa0+0x10*disk->drive;
    282}
    283
    284/*  ide command interface */
    285
    286static void pd_print_error(struct pd_unit *disk, char *msg, int status)
    287{
    288	int i;
    289
    290	printk("%s: %s: status = 0x%x =", disk->name, msg, status);
    291	for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
    292		if (status & (1 << i))
    293			printk(" %s", pd_errs[i]);
    294	printk("\n");
    295}
    296
    297static void pd_reset(struct pd_unit *disk)
    298{				/* called only for MASTER drive */
    299	write_status(disk, 4);
    300	udelay(50);
    301	write_status(disk, 0);
    302	udelay(250);
    303}
    304
    305#define DBMSG(msg)	((verbose>1)?(msg):NULL)
    306
    307static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
    308{				/* polled wait */
    309	int k, r, e;
    310
    311	k = 0;
    312	while (k < PD_SPIN) {
    313		r = status_reg(disk);
    314		k++;
    315		if (((r & w) == w) && !(r & STAT_BUSY))
    316			break;
    317		udelay(PD_SPIN_DEL);
    318	}
    319	e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
    320	if (k >= PD_SPIN)
    321		e |= ERR_TMO;
    322	if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
    323		pd_print_error(disk, msg, e);
    324	return e;
    325}
    326
    327static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
    328{
    329	write_reg(disk, 6, DRIVE(disk) + h);
    330	write_reg(disk, 1, 0);		/* the IDE task file */
    331	write_reg(disk, 2, n);
    332	write_reg(disk, 3, s);
    333	write_reg(disk, 4, c0);
    334	write_reg(disk, 5, c1);
    335	write_reg(disk, 7, func);
    336
    337	udelay(1);
    338}
    339
    340static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
    341{
    342	int c1, c0, h, s;
    343
    344	if (disk->can_lba) {
    345		s = block & 255;
    346		c0 = (block >>= 8) & 255;
    347		c1 = (block >>= 8) & 255;
    348		h = ((block >>= 8) & 15) + 0x40;
    349	} else {
    350		s = (block % disk->sectors) + 1;
    351		h = (block /= disk->sectors) % disk->heads;
    352		c0 = (block /= disk->heads) % 256;
    353		c1 = (block >>= 8);
    354	}
    355	pd_send_command(disk, count, s, h, c0, c1, func);
    356}
    357
    358/* The i/o request engine */
    359
    360enum action {Fail = 0, Ok = 1, Hold, Wait};
    361
    362static struct request *pd_req;	/* current request */
    363static enum action (*phase)(void);
    364
    365static void run_fsm(void);
    366
    367static void ps_tq_int(struct work_struct *work);
    368
    369static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
    370
    371static void schedule_fsm(void)
    372{
    373	if (!nice)
    374		schedule_delayed_work(&fsm_tq, 0);
    375	else
    376		schedule_delayed_work(&fsm_tq, nice-1);
    377}
    378
    379static void ps_tq_int(struct work_struct *work)
    380{
    381	run_fsm();
    382}
    383
    384static enum action do_pd_io_start(void);
    385static enum action pd_special(void);
    386static enum action do_pd_read_start(void);
    387static enum action do_pd_write_start(void);
    388static enum action do_pd_read_drq(void);
    389static enum action do_pd_write_done(void);
    390
    391static int pd_queue;
    392static int pd_claimed;
    393
    394static struct pd_unit *pd_current; /* current request's drive */
    395static PIA *pi_current; /* current request's PIA */
    396
    397static int set_next_request(void)
    398{
    399	struct gendisk *disk;
    400	struct request_queue *q;
    401	int old_pos = pd_queue;
    402
    403	do {
    404		disk = pd[pd_queue].gd;
    405		q = disk ? disk->queue : NULL;
    406		if (++pd_queue == PD_UNITS)
    407			pd_queue = 0;
    408		if (q) {
    409			struct pd_unit *disk = q->queuedata;
    410
    411			if (list_empty(&disk->rq_list))
    412				continue;
    413
    414			pd_req = list_first_entry(&disk->rq_list,
    415							struct request,
    416							queuelist);
    417			list_del_init(&pd_req->queuelist);
    418			blk_mq_start_request(pd_req);
    419			break;
    420		}
    421	} while (pd_queue != old_pos);
    422
    423	return pd_req != NULL;
    424}
    425
    426static void run_fsm(void)
    427{
    428	while (1) {
    429		enum action res;
    430		int stop = 0;
    431
    432		if (!phase) {
    433			pd_current = pd_req->q->disk->private_data;
    434			pi_current = pd_current->pi;
    435			phase = do_pd_io_start;
    436		}
    437
    438		switch (pd_claimed) {
    439			case 0:
    440				pd_claimed = 1;
    441				if (!pi_schedule_claimed(pi_current, run_fsm))
    442					return;
    443				fallthrough;
    444			case 1:
    445				pd_claimed = 2;
    446				pi_current->proto->connect(pi_current);
    447		}
    448
    449		switch(res = phase()) {
    450			case Ok: case Fail: {
    451				blk_status_t err;
    452
    453				err = res == Ok ? 0 : BLK_STS_IOERR;
    454				pi_disconnect(pi_current);
    455				pd_claimed = 0;
    456				phase = NULL;
    457				spin_lock_irq(&pd_lock);
    458				if (!blk_update_request(pd_req, err,
    459						blk_rq_cur_bytes(pd_req))) {
    460					__blk_mq_end_request(pd_req, err);
    461					pd_req = NULL;
    462					stop = !set_next_request();
    463				}
    464				spin_unlock_irq(&pd_lock);
    465				if (stop)
    466					return;
    467				}
    468				fallthrough;
    469			case Hold:
    470				schedule_fsm();
    471				return;
    472			case Wait:
    473				pi_disconnect(pi_current);
    474				pd_claimed = 0;
    475		}
    476	}
    477}
    478
    479static int pd_retries = 0;	/* i/o error retry count */
    480static int pd_block;		/* address of next requested block */
    481static int pd_count;		/* number of blocks still to do */
    482static int pd_run;		/* sectors in current cluster */
    483static char *pd_buf;		/* buffer for request in progress */
    484
    485static enum action do_pd_io_start(void)
    486{
    487	switch (req_op(pd_req)) {
    488	case REQ_OP_DRV_IN:
    489		phase = pd_special;
    490		return pd_special();
    491	case REQ_OP_READ:
    492	case REQ_OP_WRITE:
    493		pd_block = blk_rq_pos(pd_req);
    494		pd_count = blk_rq_cur_sectors(pd_req);
    495		if (pd_block + pd_count > get_capacity(pd_req->q->disk))
    496			return Fail;
    497		pd_run = blk_rq_sectors(pd_req);
    498		pd_buf = bio_data(pd_req->bio);
    499		pd_retries = 0;
    500		if (req_op(pd_req) == REQ_OP_READ)
    501			return do_pd_read_start();
    502		else
    503			return do_pd_write_start();
    504	}
    505	return Fail;
    506}
    507
    508static enum action pd_special(void)
    509{
    510	struct pd_req *req = blk_mq_rq_to_pdu(pd_req);
    511
    512	return req->func(pd_current);
    513}
    514
    515static int pd_next_buf(void)
    516{
    517	unsigned long saved_flags;
    518
    519	pd_count--;
    520	pd_run--;
    521	pd_buf += 512;
    522	pd_block++;
    523	if (!pd_run)
    524		return 1;
    525	if (pd_count)
    526		return 0;
    527	spin_lock_irqsave(&pd_lock, saved_flags);
    528	if (!blk_update_request(pd_req, 0, blk_rq_cur_bytes(pd_req))) {
    529		__blk_mq_end_request(pd_req, 0);
    530		pd_req = NULL;
    531		pd_count = 0;
    532		pd_buf = NULL;
    533	} else {
    534		pd_count = blk_rq_cur_sectors(pd_req);
    535		pd_buf = bio_data(pd_req->bio);
    536	}
    537	spin_unlock_irqrestore(&pd_lock, saved_flags);
    538	return !pd_count;
    539}
    540
    541static unsigned long pd_timeout;
    542
    543static enum action do_pd_read_start(void)
    544{
    545	if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
    546		if (pd_retries < PD_MAX_RETRIES) {
    547			pd_retries++;
    548			return Wait;
    549		}
    550		return Fail;
    551	}
    552	pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
    553	phase = do_pd_read_drq;
    554	pd_timeout = jiffies + PD_TMO;
    555	return Hold;
    556}
    557
    558static enum action do_pd_write_start(void)
    559{
    560	if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
    561		if (pd_retries < PD_MAX_RETRIES) {
    562			pd_retries++;
    563			return Wait;
    564		}
    565		return Fail;
    566	}
    567	pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
    568	while (1) {
    569		if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
    570			if (pd_retries < PD_MAX_RETRIES) {
    571				pd_retries++;
    572				return Wait;
    573			}
    574			return Fail;
    575		}
    576		pi_write_block(pd_current->pi, pd_buf, 512);
    577		if (pd_next_buf())
    578			break;
    579	}
    580	phase = do_pd_write_done;
    581	pd_timeout = jiffies + PD_TMO;
    582	return Hold;
    583}
    584
    585static inline int pd_ready(void)
    586{
    587	return !(status_reg(pd_current) & STAT_BUSY);
    588}
    589
    590static enum action do_pd_read_drq(void)
    591{
    592	if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
    593		return Hold;
    594
    595	while (1) {
    596		if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
    597			if (pd_retries < PD_MAX_RETRIES) {
    598				pd_retries++;
    599				phase = do_pd_read_start;
    600				return Wait;
    601			}
    602			return Fail;
    603		}
    604		pi_read_block(pd_current->pi, pd_buf, 512);
    605		if (pd_next_buf())
    606			break;
    607	}
    608	return Ok;
    609}
    610
    611static enum action do_pd_write_done(void)
    612{
    613	if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
    614		return Hold;
    615
    616	if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
    617		if (pd_retries < PD_MAX_RETRIES) {
    618			pd_retries++;
    619			phase = do_pd_write_start;
    620			return Wait;
    621		}
    622		return Fail;
    623	}
    624	return Ok;
    625}
    626
    627/* special io requests */
    628
    629/* According to the ATA standard, the default CHS geometry should be
    630   available following a reset.  Some Western Digital drives come up
    631   in a mode where only LBA addresses are accepted until the device
    632   parameters are initialised.
    633*/
    634
    635static void pd_init_dev_parms(struct pd_unit *disk)
    636{
    637	pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
    638	pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
    639			IDE_INIT_DEV_PARMS);
    640	udelay(300);
    641	pd_wait_for(disk, 0, "Initialise device parameters");
    642}
    643
    644static enum action pd_door_lock(struct pd_unit *disk)
    645{
    646	if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
    647		pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
    648		pd_wait_for(disk, STAT_READY, "Lock done");
    649	}
    650	return Ok;
    651}
    652
    653static enum action pd_door_unlock(struct pd_unit *disk)
    654{
    655	if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
    656		pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
    657		pd_wait_for(disk, STAT_READY, "Lock done");
    658	}
    659	return Ok;
    660}
    661
    662static enum action pd_eject(struct pd_unit *disk)
    663{
    664	pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
    665	pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
    666	pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
    667	pd_wait_for(disk, 0, DBMSG("before eject"));
    668	pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
    669	pd_wait_for(disk, 0, DBMSG("after eject"));
    670	return Ok;
    671}
    672
    673static enum action pd_media_check(struct pd_unit *disk)
    674{
    675	int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
    676	if (!(r & STAT_ERR)) {
    677		pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
    678		r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
    679	} else
    680		disk->changed = 1;	/* say changed if other error */
    681	if (r & ERR_MC) {
    682		disk->changed = 1;
    683		pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
    684		pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
    685		pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
    686		r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
    687	}
    688	return Ok;
    689}
    690
    691static void pd_standby_off(struct pd_unit *disk)
    692{
    693	pd_wait_for(disk, 0, DBMSG("before STANDBY"));
    694	pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
    695	pd_wait_for(disk, 0, DBMSG("after STANDBY"));
    696}
    697
    698static enum action pd_identify(struct pd_unit *disk)
    699{
    700	int j;
    701	char id[PD_ID_LEN + 1];
    702
    703/* WARNING:  here there may be dragons.  reset() applies to both drives,
    704   but we call it only on probing the MASTER. This should allow most
    705   common configurations to work, but be warned that a reset can clear
    706   settings on the SLAVE drive.
    707*/
    708
    709	if (disk->drive == 0)
    710		pd_reset(disk);
    711
    712	write_reg(disk, 6, DRIVE(disk));
    713	pd_wait_for(disk, 0, DBMSG("before IDENT"));
    714	pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
    715
    716	if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
    717		return Fail;
    718	pi_read_block(disk->pi, pd_scratch, 512);
    719	disk->can_lba = pd_scratch[99] & 2;
    720	disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
    721	disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
    722	disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
    723	if (disk->can_lba)
    724		disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
    725	else
    726		disk->capacity = disk->sectors * disk->heads * disk->cylinders;
    727
    728	for (j = 0; j < PD_ID_LEN; j++)
    729		id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
    730	j = PD_ID_LEN - 1;
    731	while ((j >= 0) && (id[j] <= 0x20))
    732		j--;
    733	j++;
    734	id[j] = 0;
    735
    736	disk->removable = pd_scratch[0] & 0x80;
    737
    738	printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
    739	       disk->name, id,
    740	       disk->drive ? "slave" : "master",
    741	       disk->capacity, disk->capacity / 2048,
    742	       disk->cylinders, disk->heads, disk->sectors,
    743	       disk->removable ? "removable" : "fixed");
    744
    745	if (disk->capacity)
    746		pd_init_dev_parms(disk);
    747	if (!disk->standby)
    748		pd_standby_off(disk);
    749
    750	return Ok;
    751}
    752
    753/* end of io request engine */
    754
    755static blk_status_t pd_queue_rq(struct blk_mq_hw_ctx *hctx,
    756				const struct blk_mq_queue_data *bd)
    757{
    758	struct pd_unit *disk = hctx->queue->queuedata;
    759
    760	spin_lock_irq(&pd_lock);
    761	if (!pd_req) {
    762		pd_req = bd->rq;
    763		blk_mq_start_request(pd_req);
    764	} else
    765		list_add_tail(&bd->rq->queuelist, &disk->rq_list);
    766	spin_unlock_irq(&pd_lock);
    767
    768	run_fsm();
    769	return BLK_STS_OK;
    770}
    771
    772static int pd_special_command(struct pd_unit *disk,
    773		      enum action (*func)(struct pd_unit *disk))
    774{
    775	struct request *rq;
    776	struct pd_req *req;
    777
    778	rq = blk_mq_alloc_request(disk->gd->queue, REQ_OP_DRV_IN, 0);
    779	if (IS_ERR(rq))
    780		return PTR_ERR(rq);
    781	req = blk_mq_rq_to_pdu(rq);
    782
    783	req->func = func;
    784	blk_execute_rq(rq, false);
    785	blk_mq_free_request(rq);
    786	return 0;
    787}
    788
    789/* kernel glue structures */
    790
    791static int pd_open(struct block_device *bdev, fmode_t mode)
    792{
    793	struct pd_unit *disk = bdev->bd_disk->private_data;
    794
    795	mutex_lock(&pd_mutex);
    796	disk->access++;
    797
    798	if (disk->removable) {
    799		pd_special_command(disk, pd_media_check);
    800		pd_special_command(disk, pd_door_lock);
    801	}
    802	mutex_unlock(&pd_mutex);
    803	return 0;
    804}
    805
    806static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
    807{
    808	struct pd_unit *disk = bdev->bd_disk->private_data;
    809
    810	if (disk->alt_geom) {
    811		geo->heads = PD_LOG_HEADS;
    812		geo->sectors = PD_LOG_SECTS;
    813		geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
    814	} else {
    815		geo->heads = disk->heads;
    816		geo->sectors = disk->sectors;
    817		geo->cylinders = disk->cylinders;
    818	}
    819
    820	return 0;
    821}
    822
    823static int pd_ioctl(struct block_device *bdev, fmode_t mode,
    824	 unsigned int cmd, unsigned long arg)
    825{
    826	struct pd_unit *disk = bdev->bd_disk->private_data;
    827
    828	switch (cmd) {
    829	case CDROMEJECT:
    830		mutex_lock(&pd_mutex);
    831		if (disk->access == 1)
    832			pd_special_command(disk, pd_eject);
    833		mutex_unlock(&pd_mutex);
    834		return 0;
    835	default:
    836		return -EINVAL;
    837	}
    838}
    839
    840static void pd_release(struct gendisk *p, fmode_t mode)
    841{
    842	struct pd_unit *disk = p->private_data;
    843
    844	mutex_lock(&pd_mutex);
    845	if (!--disk->access && disk->removable)
    846		pd_special_command(disk, pd_door_unlock);
    847	mutex_unlock(&pd_mutex);
    848}
    849
    850static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
    851{
    852	struct pd_unit *disk = p->private_data;
    853	int r;
    854	if (!disk->removable)
    855		return 0;
    856	pd_special_command(disk, pd_media_check);
    857	r = disk->changed;
    858	disk->changed = 0;
    859	return r ? DISK_EVENT_MEDIA_CHANGE : 0;
    860}
    861
    862static const struct block_device_operations pd_fops = {
    863	.owner		= THIS_MODULE,
    864	.open		= pd_open,
    865	.release	= pd_release,
    866	.ioctl		= pd_ioctl,
    867	.compat_ioctl	= pd_ioctl,
    868	.getgeo		= pd_getgeo,
    869	.check_events	= pd_check_events,
    870};
    871
    872/* probing */
    873
    874static const struct blk_mq_ops pd_mq_ops = {
    875	.queue_rq	= pd_queue_rq,
    876};
    877
    878static int pd_probe_drive(struct pd_unit *disk, int autoprobe, int port,
    879		int mode, int unit, int protocol, int delay)
    880{
    881	int index = disk - pd;
    882	int *parm = *drives[index];
    883	struct gendisk *p;
    884	int ret;
    885
    886	disk->pi = &disk->pia;
    887	disk->access = 0;
    888	disk->changed = 1;
    889	disk->capacity = 0;
    890	disk->drive = parm[D_SLV];
    891	snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a' + index);
    892	disk->alt_geom = parm[D_GEO];
    893	disk->standby = parm[D_SBY];
    894	INIT_LIST_HEAD(&disk->rq_list);
    895
    896	if (!pi_init(disk->pi, autoprobe, port, mode, unit, protocol, delay,
    897			pd_scratch, PI_PD, verbose, disk->name))
    898		return -ENXIO;
    899
    900	memset(&disk->tag_set, 0, sizeof(disk->tag_set));
    901	disk->tag_set.ops = &pd_mq_ops;
    902	disk->tag_set.cmd_size = sizeof(struct pd_req);
    903	disk->tag_set.nr_hw_queues = 1;
    904	disk->tag_set.nr_maps = 1;
    905	disk->tag_set.queue_depth = 2;
    906	disk->tag_set.numa_node = NUMA_NO_NODE;
    907	disk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING;
    908	ret = blk_mq_alloc_tag_set(&disk->tag_set);
    909	if (ret)
    910		goto pi_release;
    911
    912	p = blk_mq_alloc_disk(&disk->tag_set, disk);
    913	if (IS_ERR(p)) {
    914		ret = PTR_ERR(p);
    915		goto free_tag_set;
    916	}
    917	disk->gd = p;
    918
    919	strcpy(p->disk_name, disk->name);
    920	p->fops = &pd_fops;
    921	p->major = major;
    922	p->first_minor = (disk - pd) << PD_BITS;
    923	p->minors = 1 << PD_BITS;
    924	p->events = DISK_EVENT_MEDIA_CHANGE;
    925	p->private_data = disk;
    926	blk_queue_max_hw_sectors(p->queue, cluster);
    927	blk_queue_bounce_limit(p->queue, BLK_BOUNCE_HIGH);
    928
    929	if (disk->drive == -1) {
    930		for (disk->drive = 0; disk->drive <= 1; disk->drive++) {
    931			ret = pd_special_command(disk, pd_identify);
    932			if (ret == 0)
    933				break;
    934		}
    935	} else {
    936		ret = pd_special_command(disk, pd_identify);
    937	}
    938	if (ret)
    939		goto put_disk;
    940	set_capacity(disk->gd, disk->capacity);
    941	ret = add_disk(disk->gd);
    942	if (ret)
    943		goto cleanup_disk;
    944	return 0;
    945cleanup_disk:
    946	blk_cleanup_disk(disk->gd);
    947put_disk:
    948	put_disk(p);
    949	disk->gd = NULL;
    950free_tag_set:
    951	blk_mq_free_tag_set(&disk->tag_set);
    952pi_release:
    953	pi_release(disk->pi);
    954	return ret;
    955}
    956
    957static int __init pd_init(void)
    958{
    959	int found = 0, unit, pd_drive_count = 0;
    960	struct pd_unit *disk;
    961
    962	if (disable)
    963		return -ENODEV;
    964
    965	if (register_blkdev(major, name))
    966		return -ENODEV;
    967
    968	printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
    969	       name, name, PD_VERSION, major, cluster, nice);
    970
    971	par_drv = pi_register_driver(name);
    972	if (!par_drv) {
    973		pr_err("failed to register %s driver\n", name);
    974		goto out_unregister_blkdev;
    975	}
    976
    977	for (unit = 0; unit < PD_UNITS; unit++) {
    978		int *parm = *drives[unit];
    979
    980		if (parm[D_PRT])
    981			pd_drive_count++;
    982	}
    983
    984	if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
    985		if (!pd_probe_drive(pd, 1, -1, -1, -1, -1, -1))
    986			found++;
    987	} else {
    988		for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
    989			int *parm = *drives[unit];
    990			if (!parm[D_PRT])
    991				continue;
    992			if (!pd_probe_drive(disk, 0, parm[D_PRT], parm[D_MOD],
    993					parm[D_UNI], parm[D_PRO], parm[D_DLY]))
    994				found++;
    995		}
    996	}
    997	if (!found) {
    998		printk("%s: no valid drive found\n", name);
    999		goto out_pi_unregister_driver;
   1000	}
   1001
   1002	return 0;
   1003
   1004out_pi_unregister_driver:
   1005	pi_unregister_driver(par_drv);
   1006out_unregister_blkdev:
   1007	unregister_blkdev(major, name);
   1008	return -ENODEV;
   1009}
   1010
   1011static void __exit pd_exit(void)
   1012{
   1013	struct pd_unit *disk;
   1014	int unit;
   1015	unregister_blkdev(major, name);
   1016	for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
   1017		struct gendisk *p = disk->gd;
   1018		if (p) {
   1019			disk->gd = NULL;
   1020			del_gendisk(p);
   1021			blk_cleanup_disk(p);
   1022			blk_mq_free_tag_set(&disk->tag_set);
   1023			pi_release(disk->pi);
   1024		}
   1025	}
   1026}
   1027
   1028MODULE_LICENSE("GPL");
   1029module_init(pd_init)
   1030module_exit(pd_exit)