cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

tpm_i2c_nuvoton.c (18734B)


      1// SPDX-License-Identifier: GPL-2.0-or-later
      2 /******************************************************************************
      3 * Nuvoton TPM I2C Device Driver Interface for WPCT301/NPCT501/NPCT6XX,
      4 * based on the TCG TPM Interface Spec version 1.2.
      5 * Specifications at www.trustedcomputinggroup.org
      6 *
      7 * Copyright (C) 2011, Nuvoton Technology Corporation.
      8 *  Dan Morav <dan.morav@nuvoton.com>
      9 * Copyright (C) 2013, Obsidian Research Corp.
     10 *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
     11 *
     12 * Nuvoton contact information: APC.Support@nuvoton.com
     13 *****************************************************************************/
     14
     15#include <linux/init.h>
     16#include <linux/module.h>
     17#include <linux/moduleparam.h>
     18#include <linux/slab.h>
     19#include <linux/interrupt.h>
     20#include <linux/wait.h>
     21#include <linux/i2c.h>
     22#include <linux/of_device.h>
     23#include "tpm.h"
     24
     25/* I2C interface offsets */
     26#define TPM_STS			0x00
     27#define TPM_BURST_COUNT		0x01
     28#define TPM_DATA_FIFO_W		0x20
     29#define TPM_DATA_FIFO_R		0x40
     30#define TPM_VID_DID_RID		0x60
     31#define TPM_I2C_RETRIES		5
     32/*
     33 * I2C bus device maximum buffer size w/o counting I2C address or command
     34 * i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
     35 */
     36#define TPM_I2C_MAX_BUF_SIZE           32
     37#define TPM_I2C_RETRY_COUNT            32
     38#define TPM_I2C_BUS_DELAY              1000      	/* usec */
     39#define TPM_I2C_RETRY_DELAY_SHORT      (2 * 1000)	/* usec */
     40#define TPM_I2C_RETRY_DELAY_LONG       (10 * 1000) 	/* usec */
     41#define TPM_I2C_DELAY_RANGE            300		/* usec */
     42
     43#define OF_IS_TPM2 ((void *)1)
     44#define I2C_IS_TPM2 1
     45
     46struct priv_data {
     47	int irq;
     48	unsigned int intrs;
     49	wait_queue_head_t read_queue;
     50};
     51
     52static s32 i2c_nuvoton_read_buf(struct i2c_client *client, u8 offset, u8 size,
     53				u8 *data)
     54{
     55	s32 status;
     56
     57	status = i2c_smbus_read_i2c_block_data(client, offset, size, data);
     58	dev_dbg(&client->dev,
     59		"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
     60		offset, size, (int)size, data, status);
     61	return status;
     62}
     63
     64static s32 i2c_nuvoton_write_buf(struct i2c_client *client, u8 offset, u8 size,
     65				 u8 *data)
     66{
     67	s32 status;
     68
     69	status = i2c_smbus_write_i2c_block_data(client, offset, size, data);
     70	dev_dbg(&client->dev,
     71		"%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
     72		offset, size, (int)size, data, status);
     73	return status;
     74}
     75
     76#define TPM_STS_VALID          0x80
     77#define TPM_STS_COMMAND_READY  0x40
     78#define TPM_STS_GO             0x20
     79#define TPM_STS_DATA_AVAIL     0x10
     80#define TPM_STS_EXPECT         0x08
     81#define TPM_STS_RESPONSE_RETRY 0x02
     82#define TPM_STS_ERR_VAL        0x07    /* bit2...bit0 reads always 0 */
     83
     84#define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
     85#define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */
     86
     87/* read TPM_STS register */
     88static u8 i2c_nuvoton_read_status(struct tpm_chip *chip)
     89{
     90	struct i2c_client *client = to_i2c_client(chip->dev.parent);
     91	s32 status;
     92	u8 data;
     93
     94	status = i2c_nuvoton_read_buf(client, TPM_STS, 1, &data);
     95	if (status <= 0) {
     96		dev_err(&chip->dev, "%s() error return %d\n", __func__,
     97			status);
     98		data = TPM_STS_ERR_VAL;
     99	}
    100
    101	return data;
    102}
    103
    104/* write byte to TPM_STS register */
    105static s32 i2c_nuvoton_write_status(struct i2c_client *client, u8 data)
    106{
    107	s32 status;
    108	int i;
    109
    110	/* this causes the current command to be aborted */
    111	for (i = 0, status = -1; i < TPM_I2C_RETRY_COUNT && status < 0; i++) {
    112		status = i2c_nuvoton_write_buf(client, TPM_STS, 1, &data);
    113		if (status < 0)
    114			usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
    115				     + TPM_I2C_DELAY_RANGE);
    116	}
    117	return status;
    118}
    119
    120/* write commandReady to TPM_STS register */
    121static void i2c_nuvoton_ready(struct tpm_chip *chip)
    122{
    123	struct i2c_client *client = to_i2c_client(chip->dev.parent);
    124	s32 status;
    125
    126	/* this causes the current command to be aborted */
    127	status = i2c_nuvoton_write_status(client, TPM_STS_COMMAND_READY);
    128	if (status < 0)
    129		dev_err(&chip->dev,
    130			"%s() fail to write TPM_STS.commandReady\n", __func__);
    131}
    132
    133/* read burstCount field from TPM_STS register
    134 * return -1 on fail to read */
    135static int i2c_nuvoton_get_burstcount(struct i2c_client *client,
    136				      struct tpm_chip *chip)
    137{
    138	unsigned long stop = jiffies + chip->timeout_d;
    139	s32 status;
    140	int burst_count = -1;
    141	u8 data;
    142
    143	/* wait for burstcount to be non-zero */
    144	do {
    145		/* in I2C burstCount is 1 byte */
    146		status = i2c_nuvoton_read_buf(client, TPM_BURST_COUNT, 1,
    147					      &data);
    148		if (status > 0 && data > 0) {
    149			burst_count = min_t(u8, TPM_I2C_MAX_BUF_SIZE, data);
    150			break;
    151		}
    152		usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
    153			     + TPM_I2C_DELAY_RANGE);
    154	} while (time_before(jiffies, stop));
    155
    156	return burst_count;
    157}
    158
    159/*
    160 * WPCT301/NPCT501/NPCT6XX SINT# supports only dataAvail
    161 * any call to this function which is not waiting for dataAvail will
    162 * set queue to NULL to avoid waiting for interrupt
    163 */
    164static bool i2c_nuvoton_check_status(struct tpm_chip *chip, u8 mask, u8 value)
    165{
    166	u8 status = i2c_nuvoton_read_status(chip);
    167	return (status != TPM_STS_ERR_VAL) && ((status & mask) == value);
    168}
    169
    170static int i2c_nuvoton_wait_for_stat(struct tpm_chip *chip, u8 mask, u8 value,
    171				     u32 timeout, wait_queue_head_t *queue)
    172{
    173	if ((chip->flags & TPM_CHIP_FLAG_IRQ) && queue) {
    174		s32 rc;
    175		struct priv_data *priv = dev_get_drvdata(&chip->dev);
    176		unsigned int cur_intrs = priv->intrs;
    177
    178		enable_irq(priv->irq);
    179		rc = wait_event_interruptible_timeout(*queue,
    180						      cur_intrs != priv->intrs,
    181						      timeout);
    182		if (rc > 0)
    183			return 0;
    184		/* At this point we know that the SINT pin is asserted, so we
    185		 * do not need to do i2c_nuvoton_check_status */
    186	} else {
    187		unsigned long ten_msec, stop;
    188		bool status_valid;
    189
    190		/* check current status */
    191		status_valid = i2c_nuvoton_check_status(chip, mask, value);
    192		if (status_valid)
    193			return 0;
    194
    195		/* use polling to wait for the event */
    196		ten_msec = jiffies + usecs_to_jiffies(TPM_I2C_RETRY_DELAY_LONG);
    197		stop = jiffies + timeout;
    198		do {
    199			if (time_before(jiffies, ten_msec))
    200				usleep_range(TPM_I2C_RETRY_DELAY_SHORT,
    201					     TPM_I2C_RETRY_DELAY_SHORT
    202					     + TPM_I2C_DELAY_RANGE);
    203			else
    204				usleep_range(TPM_I2C_RETRY_DELAY_LONG,
    205					     TPM_I2C_RETRY_DELAY_LONG
    206					     + TPM_I2C_DELAY_RANGE);
    207			status_valid = i2c_nuvoton_check_status(chip, mask,
    208								value);
    209			if (status_valid)
    210				return 0;
    211		} while (time_before(jiffies, stop));
    212	}
    213	dev_err(&chip->dev, "%s(%02x, %02x) -> timeout\n", __func__, mask,
    214		value);
    215	return -ETIMEDOUT;
    216}
    217
    218/* wait for dataAvail field to be set in the TPM_STS register */
    219static int i2c_nuvoton_wait_for_data_avail(struct tpm_chip *chip, u32 timeout,
    220					   wait_queue_head_t *queue)
    221{
    222	return i2c_nuvoton_wait_for_stat(chip,
    223					 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
    224					 TPM_STS_DATA_AVAIL | TPM_STS_VALID,
    225					 timeout, queue);
    226}
    227
    228/* Read @count bytes into @buf from TPM_RD_FIFO register */
    229static int i2c_nuvoton_recv_data(struct i2c_client *client,
    230				 struct tpm_chip *chip, u8 *buf, size_t count)
    231{
    232	struct priv_data *priv = dev_get_drvdata(&chip->dev);
    233	s32 rc;
    234	int burst_count, bytes2read, size = 0;
    235
    236	while (size < count &&
    237	       i2c_nuvoton_wait_for_data_avail(chip,
    238					       chip->timeout_c,
    239					       &priv->read_queue) == 0) {
    240		burst_count = i2c_nuvoton_get_burstcount(client, chip);
    241		if (burst_count < 0) {
    242			dev_err(&chip->dev,
    243				"%s() fail to read burstCount=%d\n", __func__,
    244				burst_count);
    245			return -EIO;
    246		}
    247		bytes2read = min_t(size_t, burst_count, count - size);
    248		rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_R,
    249					  bytes2read, &buf[size]);
    250		if (rc < 0) {
    251			dev_err(&chip->dev,
    252				"%s() fail on i2c_nuvoton_read_buf()=%d\n",
    253				__func__, rc);
    254			return -EIO;
    255		}
    256		dev_dbg(&chip->dev, "%s(%d):", __func__, bytes2read);
    257		size += bytes2read;
    258	}
    259
    260	return size;
    261}
    262
    263/* Read TPM command results */
    264static int i2c_nuvoton_recv(struct tpm_chip *chip, u8 *buf, size_t count)
    265{
    266	struct priv_data *priv = dev_get_drvdata(&chip->dev);
    267	struct device *dev = chip->dev.parent;
    268	struct i2c_client *client = to_i2c_client(dev);
    269	s32 rc;
    270	int status;
    271	int burst_count;
    272	int retries;
    273	int size = 0;
    274	u32 expected;
    275
    276	if (count < TPM_HEADER_SIZE) {
    277		i2c_nuvoton_ready(chip);    /* return to idle */
    278		dev_err(dev, "%s() count < header size\n", __func__);
    279		return -EIO;
    280	}
    281	for (retries = 0; retries < TPM_I2C_RETRIES; retries++) {
    282		if (retries > 0) {
    283			/* if this is not the first trial, set responseRetry */
    284			i2c_nuvoton_write_status(client,
    285						 TPM_STS_RESPONSE_RETRY);
    286		}
    287		/*
    288		 * read first available (> 10 bytes), including:
    289		 * tag, paramsize, and result
    290		 */
    291		status = i2c_nuvoton_wait_for_data_avail(
    292			chip, chip->timeout_c, &priv->read_queue);
    293		if (status != 0) {
    294			dev_err(dev, "%s() timeout on dataAvail\n", __func__);
    295			size = -ETIMEDOUT;
    296			continue;
    297		}
    298		burst_count = i2c_nuvoton_get_burstcount(client, chip);
    299		if (burst_count < 0) {
    300			dev_err(dev, "%s() fail to get burstCount\n", __func__);
    301			size = -EIO;
    302			continue;
    303		}
    304		size = i2c_nuvoton_recv_data(client, chip, buf,
    305					     burst_count);
    306		if (size < TPM_HEADER_SIZE) {
    307			dev_err(dev, "%s() fail to read header\n", __func__);
    308			size = -EIO;
    309			continue;
    310		}
    311		/*
    312		 * convert number of expected bytes field from big endian 32 bit
    313		 * to machine native
    314		 */
    315		expected = be32_to_cpu(*(__be32 *) (buf + 2));
    316		if (expected > count || expected < size) {
    317			dev_err(dev, "%s() expected > count\n", __func__);
    318			size = -EIO;
    319			continue;
    320		}
    321		rc = i2c_nuvoton_recv_data(client, chip, &buf[size],
    322					   expected - size);
    323		size += rc;
    324		if (rc < 0 || size < expected) {
    325			dev_err(dev, "%s() fail to read remainder of result\n",
    326				__func__);
    327			size = -EIO;
    328			continue;
    329		}
    330		if (i2c_nuvoton_wait_for_stat(
    331			    chip, TPM_STS_VALID | TPM_STS_DATA_AVAIL,
    332			    TPM_STS_VALID, chip->timeout_c,
    333			    NULL)) {
    334			dev_err(dev, "%s() error left over data\n", __func__);
    335			size = -ETIMEDOUT;
    336			continue;
    337		}
    338		break;
    339	}
    340	i2c_nuvoton_ready(chip);
    341	dev_dbg(&chip->dev, "%s() -> %d\n", __func__, size);
    342	return size;
    343}
    344
    345/*
    346 * Send TPM command.
    347 *
    348 * If interrupts are used (signaled by an irq set in the vendor structure)
    349 * tpm.c can skip polling for the data to be available as the interrupt is
    350 * waited for here
    351 */
    352static int i2c_nuvoton_send(struct tpm_chip *chip, u8 *buf, size_t len)
    353{
    354	struct priv_data *priv = dev_get_drvdata(&chip->dev);
    355	struct device *dev = chip->dev.parent;
    356	struct i2c_client *client = to_i2c_client(dev);
    357	u32 ordinal;
    358	unsigned long duration;
    359	size_t count = 0;
    360	int burst_count, bytes2write, retries, rc = -EIO;
    361
    362	for (retries = 0; retries < TPM_RETRY; retries++) {
    363		i2c_nuvoton_ready(chip);
    364		if (i2c_nuvoton_wait_for_stat(chip, TPM_STS_COMMAND_READY,
    365					      TPM_STS_COMMAND_READY,
    366					      chip->timeout_b, NULL)) {
    367			dev_err(dev, "%s() timeout on commandReady\n",
    368				__func__);
    369			rc = -EIO;
    370			continue;
    371		}
    372		rc = 0;
    373		while (count < len - 1) {
    374			burst_count = i2c_nuvoton_get_burstcount(client,
    375								 chip);
    376			if (burst_count < 0) {
    377				dev_err(dev, "%s() fail get burstCount\n",
    378					__func__);
    379				rc = -EIO;
    380				break;
    381			}
    382			bytes2write = min_t(size_t, burst_count,
    383					    len - 1 - count);
    384			rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W,
    385						   bytes2write, &buf[count]);
    386			if (rc < 0) {
    387				dev_err(dev, "%s() fail i2cWriteBuf\n",
    388					__func__);
    389				break;
    390			}
    391			dev_dbg(dev, "%s(%d):", __func__, bytes2write);
    392			count += bytes2write;
    393			rc = i2c_nuvoton_wait_for_stat(chip,
    394						       TPM_STS_VALID |
    395						       TPM_STS_EXPECT,
    396						       TPM_STS_VALID |
    397						       TPM_STS_EXPECT,
    398						       chip->timeout_c,
    399						       NULL);
    400			if (rc < 0) {
    401				dev_err(dev, "%s() timeout on Expect\n",
    402					__func__);
    403				rc = -ETIMEDOUT;
    404				break;
    405			}
    406		}
    407		if (rc < 0)
    408			continue;
    409
    410		/* write last byte */
    411		rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W, 1,
    412					   &buf[count]);
    413		if (rc < 0) {
    414			dev_err(dev, "%s() fail to write last byte\n",
    415				__func__);
    416			rc = -EIO;
    417			continue;
    418		}
    419		dev_dbg(dev, "%s(last): %02x", __func__, buf[count]);
    420		rc = i2c_nuvoton_wait_for_stat(chip,
    421					       TPM_STS_VALID | TPM_STS_EXPECT,
    422					       TPM_STS_VALID,
    423					       chip->timeout_c, NULL);
    424		if (rc) {
    425			dev_err(dev, "%s() timeout on Expect to clear\n",
    426				__func__);
    427			rc = -ETIMEDOUT;
    428			continue;
    429		}
    430		break;
    431	}
    432	if (rc < 0) {
    433		/* retries == TPM_RETRY */
    434		i2c_nuvoton_ready(chip);
    435		return rc;
    436	}
    437	/* execute the TPM command */
    438	rc = i2c_nuvoton_write_status(client, TPM_STS_GO);
    439	if (rc < 0) {
    440		dev_err(dev, "%s() fail to write Go\n", __func__);
    441		i2c_nuvoton_ready(chip);
    442		return rc;
    443	}
    444	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
    445	duration = tpm_calc_ordinal_duration(chip, ordinal);
    446
    447	rc = i2c_nuvoton_wait_for_data_avail(chip, duration, &priv->read_queue);
    448	if (rc) {
    449		dev_err(dev, "%s() timeout command duration %ld\n",
    450			__func__, duration);
    451		i2c_nuvoton_ready(chip);
    452		return rc;
    453	}
    454
    455	dev_dbg(dev, "%s() -> %zd\n", __func__, len);
    456	return 0;
    457}
    458
    459static bool i2c_nuvoton_req_canceled(struct tpm_chip *chip, u8 status)
    460{
    461	return (status == TPM_STS_COMMAND_READY);
    462}
    463
    464static const struct tpm_class_ops tpm_i2c = {
    465	.flags = TPM_OPS_AUTO_STARTUP,
    466	.status = i2c_nuvoton_read_status,
    467	.recv = i2c_nuvoton_recv,
    468	.send = i2c_nuvoton_send,
    469	.cancel = i2c_nuvoton_ready,
    470	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
    471	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
    472	.req_canceled = i2c_nuvoton_req_canceled,
    473};
    474
    475/* The only purpose for the handler is to signal to any waiting threads that
    476 * the interrupt is currently being asserted. The driver does not do any
    477 * processing triggered by interrupts, and the chip provides no way to mask at
    478 * the source (plus that would be slow over I2C). Run the IRQ as a one-shot,
    479 * this means it cannot be shared. */
    480static irqreturn_t i2c_nuvoton_int_handler(int dummy, void *dev_id)
    481{
    482	struct tpm_chip *chip = dev_id;
    483	struct priv_data *priv = dev_get_drvdata(&chip->dev);
    484
    485	priv->intrs++;
    486	wake_up(&priv->read_queue);
    487	disable_irq_nosync(priv->irq);
    488	return IRQ_HANDLED;
    489}
    490
    491static int get_vid(struct i2c_client *client, u32 *res)
    492{
    493	static const u8 vid_did_rid_value[] = { 0x50, 0x10, 0xfe };
    494	u32 temp;
    495	s32 rc;
    496
    497	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
    498		return -ENODEV;
    499	rc = i2c_nuvoton_read_buf(client, TPM_VID_DID_RID, 4, (u8 *)&temp);
    500	if (rc < 0)
    501		return rc;
    502
    503	/* check WPCT301 values - ignore RID */
    504	if (memcmp(&temp, vid_did_rid_value, sizeof(vid_did_rid_value))) {
    505		/*
    506		 * f/w rev 2.81 has an issue where the VID_DID_RID is not
    507		 * reporting the right value. so give it another chance at
    508		 * offset 0x20 (FIFO_W).
    509		 */
    510		rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_W, 4,
    511					  (u8 *) (&temp));
    512		if (rc < 0)
    513			return rc;
    514
    515		/* check WPCT301 values - ignore RID */
    516		if (memcmp(&temp, vid_did_rid_value,
    517			   sizeof(vid_did_rid_value)))
    518			return -ENODEV;
    519	}
    520
    521	*res = temp;
    522	return 0;
    523}
    524
    525static int i2c_nuvoton_probe(struct i2c_client *client,
    526			     const struct i2c_device_id *id)
    527{
    528	int rc;
    529	struct tpm_chip *chip;
    530	struct device *dev = &client->dev;
    531	struct priv_data *priv;
    532	u32 vid = 0;
    533
    534	rc = get_vid(client, &vid);
    535	if (rc)
    536		return rc;
    537
    538	dev_info(dev, "VID: %04X DID: %02X RID: %02X\n", (u16) vid,
    539		 (u8) (vid >> 16), (u8) (vid >> 24));
    540
    541	chip = tpmm_chip_alloc(dev, &tpm_i2c);
    542	if (IS_ERR(chip))
    543		return PTR_ERR(chip);
    544
    545	priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
    546	if (!priv)
    547		return -ENOMEM;
    548
    549	if (dev->of_node) {
    550		const struct of_device_id *of_id;
    551
    552		of_id = of_match_device(dev->driver->of_match_table, dev);
    553		if (of_id && of_id->data == OF_IS_TPM2)
    554			chip->flags |= TPM_CHIP_FLAG_TPM2;
    555	} else
    556		if (id->driver_data == I2C_IS_TPM2)
    557			chip->flags |= TPM_CHIP_FLAG_TPM2;
    558
    559	init_waitqueue_head(&priv->read_queue);
    560
    561	/* Default timeouts */
    562	chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
    563	chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
    564	chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
    565	chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
    566
    567	dev_set_drvdata(&chip->dev, priv);
    568
    569	/*
    570	 * I2C intfcaps (interrupt capabilitieis) in the chip are hard coded to:
    571	 *   TPM_INTF_INT_LEVEL_LOW | TPM_INTF_DATA_AVAIL_INT
    572	 * The IRQ should be set in the i2c_board_info (which is done
    573	 * automatically in of_i2c_register_devices, for device tree users */
    574	priv->irq = client->irq;
    575	if (client->irq) {
    576		dev_dbg(dev, "%s() priv->irq\n", __func__);
    577		rc = devm_request_irq(dev, client->irq,
    578				      i2c_nuvoton_int_handler,
    579				      IRQF_TRIGGER_LOW,
    580				      dev_name(&chip->dev),
    581				      chip);
    582		if (rc) {
    583			dev_err(dev, "%s() Unable to request irq: %d for use\n",
    584				__func__, priv->irq);
    585			priv->irq = 0;
    586		} else {
    587			chip->flags |= TPM_CHIP_FLAG_IRQ;
    588			/* Clear any pending interrupt */
    589			i2c_nuvoton_ready(chip);
    590			/* - wait for TPM_STS==0xA0 (stsValid, commandReady) */
    591			rc = i2c_nuvoton_wait_for_stat(chip,
    592						       TPM_STS_COMMAND_READY,
    593						       TPM_STS_COMMAND_READY,
    594						       chip->timeout_b,
    595						       NULL);
    596			if (rc == 0) {
    597				/*
    598				 * TIS is in ready state
    599				 * write dummy byte to enter reception state
    600				 * TPM_DATA_FIFO_W <- rc (0)
    601				 */
    602				rc = i2c_nuvoton_write_buf(client,
    603							   TPM_DATA_FIFO_W,
    604							   1, (u8 *) (&rc));
    605				if (rc < 0)
    606					return rc;
    607				/* TPM_STS <- 0x40 (commandReady) */
    608				i2c_nuvoton_ready(chip);
    609			} else {
    610				/*
    611				 * timeout_b reached - command was
    612				 * aborted. TIS should now be in idle state -
    613				 * only TPM_STS_VALID should be set
    614				 */
    615				if (i2c_nuvoton_read_status(chip) !=
    616				    TPM_STS_VALID)
    617					return -EIO;
    618			}
    619		}
    620	}
    621
    622	return tpm_chip_register(chip);
    623}
    624
    625static int i2c_nuvoton_remove(struct i2c_client *client)
    626{
    627	struct tpm_chip *chip = i2c_get_clientdata(client);
    628
    629	tpm_chip_unregister(chip);
    630	return 0;
    631}
    632
    633static const struct i2c_device_id i2c_nuvoton_id[] = {
    634	{"tpm_i2c_nuvoton"},
    635	{"tpm2_i2c_nuvoton", .driver_data = I2C_IS_TPM2},
    636	{}
    637};
    638MODULE_DEVICE_TABLE(i2c, i2c_nuvoton_id);
    639
    640#ifdef CONFIG_OF
    641static const struct of_device_id i2c_nuvoton_of_match[] = {
    642	{.compatible = "nuvoton,npct501"},
    643	{.compatible = "winbond,wpct301"},
    644	{.compatible = "nuvoton,npct601", .data = OF_IS_TPM2},
    645	{},
    646};
    647MODULE_DEVICE_TABLE(of, i2c_nuvoton_of_match);
    648#endif
    649
    650static SIMPLE_DEV_PM_OPS(i2c_nuvoton_pm_ops, tpm_pm_suspend, tpm_pm_resume);
    651
    652static struct i2c_driver i2c_nuvoton_driver = {
    653	.id_table = i2c_nuvoton_id,
    654	.probe = i2c_nuvoton_probe,
    655	.remove = i2c_nuvoton_remove,
    656	.driver = {
    657		.name = "tpm_i2c_nuvoton",
    658		.pm = &i2c_nuvoton_pm_ops,
    659		.of_match_table = of_match_ptr(i2c_nuvoton_of_match),
    660	},
    661};
    662
    663module_i2c_driver(i2c_nuvoton_driver);
    664
    665MODULE_AUTHOR("Dan Morav (dan.morav@nuvoton.com)");
    666MODULE_DESCRIPTION("Nuvoton TPM I2C Driver");
    667MODULE_LICENSE("GPL");