comedi_pcmcia.c (6788B)
1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * comedi_pcmcia.c 4 * Comedi PCMCIA driver specific functions. 5 * 6 * COMEDI - Linux Control and Measurement Device Interface 7 * Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org> 8 */ 9 10#include <linux/module.h> 11#include <linux/kernel.h> 12#include <linux/comedi/comedi_pcmcia.h> 13 14/** 15 * comedi_to_pcmcia_dev() - Return PCMCIA device attached to COMEDI device 16 * @dev: COMEDI device. 17 * 18 * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a 19 * a &struct device embedded in a &struct pcmcia_device. 20 * 21 * Return: Attached PCMCIA device if @dev->hw_dev is non-%NULL. 22 * Return %NULL if @dev->hw_dev is %NULL. 23 */ 24struct pcmcia_device *comedi_to_pcmcia_dev(struct comedi_device *dev) 25{ 26 return dev->hw_dev ? to_pcmcia_dev(dev->hw_dev) : NULL; 27} 28EXPORT_SYMBOL_GPL(comedi_to_pcmcia_dev); 29 30static int comedi_pcmcia_conf_check(struct pcmcia_device *link, 31 void *priv_data) 32{ 33 if (link->config_index == 0) 34 return -EINVAL; 35 36 return pcmcia_request_io(link); 37} 38 39/** 40 * comedi_pcmcia_enable() - Request the regions and enable the PCMCIA device 41 * @dev: COMEDI device. 42 * @conf_check: Optional callback to check each configuration option of the 43 * PCMCIA device and request I/O regions. 44 * 45 * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a a 46 * &struct device embedded in a &struct pcmcia_device. The comedi PCMCIA 47 * driver needs to set the 'config_flags' member in the &struct pcmcia_device, 48 * as appropriate for that driver, before calling this function in order to 49 * allow pcmcia_loop_config() to do its internal autoconfiguration. 50 * 51 * If @conf_check is %NULL it is set to a default function. If is 52 * passed to pcmcia_loop_config() and should return %0 if the configuration 53 * is valid and I/O regions requested successfully, otherwise it should return 54 * a negative error value. The default function returns -%EINVAL if the 55 * 'config_index' member is %0, otherwise it calls pcmcia_request_io() and 56 * returns the result. 57 * 58 * If the above configuration check passes, pcmcia_enable_device() is called 59 * to set up and activate the PCMCIA device. 60 * 61 * If this function returns an error, comedi_pcmcia_disable() should be called 62 * to release requested resources. 63 * 64 * Return: 65 * 0 on success, 66 * -%ENODEV id @dev->hw_dev is %NULL, 67 * a negative error number from pcmcia_loop_config() if it fails, 68 * or a negative error number from pcmcia_enable_device() if it fails. 69 */ 70int comedi_pcmcia_enable(struct comedi_device *dev, 71 int (*conf_check)(struct pcmcia_device *p_dev, 72 void *priv_data)) 73{ 74 struct pcmcia_device *link = comedi_to_pcmcia_dev(dev); 75 int ret; 76 77 if (!link) 78 return -ENODEV; 79 80 if (!conf_check) 81 conf_check = comedi_pcmcia_conf_check; 82 83 ret = pcmcia_loop_config(link, conf_check, NULL); 84 if (ret) 85 return ret; 86 87 return pcmcia_enable_device(link); 88} 89EXPORT_SYMBOL_GPL(comedi_pcmcia_enable); 90 91/** 92 * comedi_pcmcia_disable() - Disable the PCMCIA device and release the regions 93 * @dev: COMEDI device. 94 * 95 * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a 96 * a &struct device embedded in a &struct pcmcia_device. Call 97 * pcmcia_disable_device() to disable and clean up the PCMCIA device. 98 */ 99void comedi_pcmcia_disable(struct comedi_device *dev) 100{ 101 struct pcmcia_device *link = comedi_to_pcmcia_dev(dev); 102 103 if (link) 104 pcmcia_disable_device(link); 105} 106EXPORT_SYMBOL_GPL(comedi_pcmcia_disable); 107 108/** 109 * comedi_pcmcia_auto_config() - Configure/probe a PCMCIA COMEDI device 110 * @link: PCMCIA device. 111 * @driver: Registered COMEDI driver. 112 * 113 * Typically called from the pcmcia_driver (*probe) function. Auto-configure 114 * a COMEDI device, using a pointer to the &struct device embedded in *@link 115 * as the hardware device. The @driver's "auto_attach" handler may call 116 * comedi_to_pcmcia_dev() on the passed in COMEDI device to recover @link. 117 * 118 * Return: The result of calling comedi_auto_config() (0 on success, or a 119 * negative error number on failure). 120 */ 121int comedi_pcmcia_auto_config(struct pcmcia_device *link, 122 struct comedi_driver *driver) 123{ 124 return comedi_auto_config(&link->dev, driver, 0); 125} 126EXPORT_SYMBOL_GPL(comedi_pcmcia_auto_config); 127 128/** 129 * comedi_pcmcia_auto_unconfig() - Unconfigure/remove a PCMCIA COMEDI device 130 * @link: PCMCIA device. 131 * 132 * Typically called from the pcmcia_driver (*remove) function. 133 * Auto-unconfigure a COMEDI device attached to this PCMCIA device, using a 134 * pointer to the &struct device embedded in *@link as the hardware device. 135 * The COMEDI driver's "detach" handler will be called during unconfiguration 136 * of the COMEDI device. 137 * 138 * Note that the COMEDI device may have already been unconfigured using the 139 * %COMEDI_DEVCONFIG ioctl, in which case this attempt to unconfigure it 140 * again should be ignored. 141 */ 142void comedi_pcmcia_auto_unconfig(struct pcmcia_device *link) 143{ 144 comedi_auto_unconfig(&link->dev); 145} 146EXPORT_SYMBOL_GPL(comedi_pcmcia_auto_unconfig); 147 148/** 149 * comedi_pcmcia_driver_register() - Register a PCMCIA COMEDI driver 150 * @comedi_driver: COMEDI driver to be registered. 151 * @pcmcia_driver: PCMCIA driver to be registered. 152 * 153 * This function is used for the module_init() of PCMCIA COMEDI driver modules 154 * to register the COMEDI driver and the PCMCIA driver. Do not call it 155 * directly, use the module_comedi_pcmcia_driver() helper macro instead. 156 * 157 * Return: 0 on success, or a negative error number on failure. 158 */ 159int comedi_pcmcia_driver_register(struct comedi_driver *comedi_driver, 160 struct pcmcia_driver *pcmcia_driver) 161{ 162 int ret; 163 164 ret = comedi_driver_register(comedi_driver); 165 if (ret < 0) 166 return ret; 167 168 ret = pcmcia_register_driver(pcmcia_driver); 169 if (ret < 0) { 170 comedi_driver_unregister(comedi_driver); 171 return ret; 172 } 173 174 return 0; 175} 176EXPORT_SYMBOL_GPL(comedi_pcmcia_driver_register); 177 178/** 179 * comedi_pcmcia_driver_unregister() - Unregister a PCMCIA COMEDI driver 180 * @comedi_driver: COMEDI driver to be registered. 181 * @pcmcia_driver: PCMCIA driver to be registered. 182 * 183 * This function is called from the module_exit() of PCMCIA COMEDI driver 184 * modules to unregister the PCMCIA driver and the COMEDI driver. Do not call 185 * it directly, use the module_comedi_pcmcia_driver() helper macro instead. 186 */ 187void comedi_pcmcia_driver_unregister(struct comedi_driver *comedi_driver, 188 struct pcmcia_driver *pcmcia_driver) 189{ 190 pcmcia_unregister_driver(pcmcia_driver); 191 comedi_driver_unregister(comedi_driver); 192} 193EXPORT_SYMBOL_GPL(comedi_pcmcia_driver_unregister); 194 195static int __init comedi_pcmcia_init(void) 196{ 197 return 0; 198} 199module_init(comedi_pcmcia_init); 200 201static void __exit comedi_pcmcia_exit(void) 202{ 203} 204module_exit(comedi_pcmcia_exit); 205 206MODULE_AUTHOR("https://www.comedi.org"); 207MODULE_DESCRIPTION("Comedi PCMCIA interface module"); 208MODULE_LICENSE("GPL");