ni_labpc_cs.c (3323B)
1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Driver for National Instruments daqcard-1200 boards 4 * Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net> 5 * 6 * PCMCIA crap is adapted from dummy_cs.c 1.31 2001/08/24 12:13:13 7 * from the pcmcia package. 8 * The initial developer of the pcmcia dummy_cs.c code is David A. Hinds 9 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 10 * are Copyright (C) 1999 David A. Hinds. 11 */ 12 13/* 14 * Driver: ni_labpc_cs 15 * Description: National Instruments Lab-PC (& compatibles) 16 * Author: Frank Mori Hess <fmhess@users.sourceforge.net> 17 * Devices: [National Instruments] DAQCard-1200 (daqcard-1200) 18 * Status: works 19 * 20 * Thanks go to Fredrik Lingvall for much testing and perseverance in 21 * helping to debug daqcard-1200 support. 22 * 23 * The 1200 series boards have onboard calibration dacs for correcting 24 * analog input/output offsets and gains. The proper settings for these 25 * caldacs are stored on the board's eeprom. To read the caldac values 26 * from the eeprom and store them into a file that can be then be used by 27 * comedilib, use the comedi_calibrate program. 28 * 29 * Configuration options: none 30 * 31 * The daqcard-1200 has quirky chanlist requirements when scanning multiple 32 * channels. Multiple channel scan sequence must start at highest channel, 33 * then decrement down to channel 0. Chanlists consisting of all one channel 34 * are also legal, and allow you to pace conversions in bursts. 35 * 36 * NI manuals: 37 * 340988a (daqcard-1200) 38 */ 39 40#include <linux/module.h> 41#include <linux/comedi/comedi_pcmcia.h> 42 43#include "ni_labpc.h" 44 45static const struct labpc_boardinfo labpc_cs_boards[] = { 46 { 47 .name = "daqcard-1200", 48 .ai_speed = 10000, 49 .has_ao = 1, 50 .is_labpc1200 = 1, 51 }, 52}; 53 54static int labpc_cs_auto_attach(struct comedi_device *dev, 55 unsigned long context) 56{ 57 struct pcmcia_device *link = comedi_to_pcmcia_dev(dev); 58 int ret; 59 60 /* The ni_labpc driver needs the board_ptr */ 61 dev->board_ptr = &labpc_cs_boards[0]; 62 63 link->config_flags |= CONF_AUTO_SET_IO | 64 CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; 65 ret = comedi_pcmcia_enable(dev, NULL); 66 if (ret) 67 return ret; 68 dev->iobase = link->resource[0]->start; 69 70 if (!link->irq) 71 return -EINVAL; 72 73 return labpc_common_attach(dev, link->irq, IRQF_SHARED); 74} 75 76static void labpc_cs_detach(struct comedi_device *dev) 77{ 78 labpc_common_detach(dev); 79 comedi_pcmcia_disable(dev); 80} 81 82static struct comedi_driver driver_labpc_cs = { 83 .driver_name = "ni_labpc_cs", 84 .module = THIS_MODULE, 85 .auto_attach = labpc_cs_auto_attach, 86 .detach = labpc_cs_detach, 87}; 88 89static int labpc_cs_attach(struct pcmcia_device *link) 90{ 91 return comedi_pcmcia_auto_config(link, &driver_labpc_cs); 92} 93 94static const struct pcmcia_device_id labpc_cs_ids[] = { 95 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */ 96 PCMCIA_DEVICE_NULL 97}; 98MODULE_DEVICE_TABLE(pcmcia, labpc_cs_ids); 99 100static struct pcmcia_driver labpc_cs_driver = { 101 .name = "daqcard-1200", 102 .owner = THIS_MODULE, 103 .id_table = labpc_cs_ids, 104 .probe = labpc_cs_attach, 105 .remove = comedi_pcmcia_auto_unconfig, 106}; 107module_comedi_pcmcia_driver(driver_labpc_cs, labpc_cs_driver); 108 109MODULE_DESCRIPTION("Comedi driver for National Instruments Lab-PC"); 110MODULE_AUTHOR("Frank Mori Hess <fmhess@users.sourceforge.net>"); 111MODULE_LICENSE("GPL");