cpuidle-big_little.c (6714B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2013 ARM/Linaro 4 * 5 * Authors: Daniel Lezcano <daniel.lezcano@linaro.org> 6 * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 7 * Nicolas Pitre <nicolas.pitre@linaro.org> 8 * 9 * Maintainer: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 10 * Maintainer: Daniel Lezcano <daniel.lezcano@linaro.org> 11 */ 12#include <linux/cpuidle.h> 13#include <linux/cpu_pm.h> 14#include <linux/slab.h> 15#include <linux/of.h> 16 17#include <asm/cpu.h> 18#include <asm/cputype.h> 19#include <asm/cpuidle.h> 20#include <asm/mcpm.h> 21#include <asm/smp_plat.h> 22#include <asm/suspend.h> 23 24#include "dt_idle_states.h" 25 26static int bl_enter_powerdown(struct cpuidle_device *dev, 27 struct cpuidle_driver *drv, int idx); 28 29/* 30 * NB: Owing to current menu governor behaviour big and LITTLE 31 * index 1 states have to define exit_latency and target_residency for 32 * cluster state since, when all CPUs in a cluster hit it, the cluster 33 * can be shutdown. This means that when a single CPU enters this state 34 * the exit_latency and target_residency values are somewhat overkill. 35 * There is no notion of cluster states in the menu governor, so CPUs 36 * have to define CPU states where possibly the cluster will be shutdown 37 * depending on the state of other CPUs. idle states entry and exit happen 38 * at random times; however the cluster state provides target_residency 39 * values as if all CPUs in a cluster enter the state at once; this is 40 * somewhat optimistic and behaviour should be fixed either in the governor 41 * or in the MCPM back-ends. 42 * To make this driver 100% generic the number of states and the exit_latency 43 * target_residency values must be obtained from device tree bindings. 44 * 45 * exit_latency: refers to the TC2 vexpress test chip and depends on the 46 * current cluster operating point. It is the time it takes to get the CPU 47 * up and running when the CPU is powered up on cluster wake-up from shutdown. 48 * Current values for big and LITTLE clusters are provided for clusters 49 * running at default operating points. 50 * 51 * target_residency: it is the minimum amount of time the cluster has 52 * to be down to break even in terms of power consumption. cluster 53 * shutdown has inherent dynamic power costs (L2 writebacks to DRAM 54 * being the main factor) that depend on the current operating points. 55 * The current values for both clusters are provided for a CPU whose half 56 * of L2 lines are dirty and require cleaning to DRAM, and takes into 57 * account leakage static power values related to the vexpress TC2 testchip. 58 */ 59static struct cpuidle_driver bl_idle_little_driver = { 60 .name = "little_idle", 61 .owner = THIS_MODULE, 62 .states[0] = ARM_CPUIDLE_WFI_STATE, 63 .states[1] = { 64 .enter = bl_enter_powerdown, 65 .exit_latency = 700, 66 .target_residency = 2500, 67 .flags = CPUIDLE_FLAG_TIMER_STOP, 68 .name = "C1", 69 .desc = "ARM little-cluster power down", 70 }, 71 .state_count = 2, 72}; 73 74static const struct of_device_id bl_idle_state_match[] __initconst = { 75 { .compatible = "arm,idle-state", 76 .data = bl_enter_powerdown }, 77 { }, 78}; 79 80static struct cpuidle_driver bl_idle_big_driver = { 81 .name = "big_idle", 82 .owner = THIS_MODULE, 83 .states[0] = ARM_CPUIDLE_WFI_STATE, 84 .states[1] = { 85 .enter = bl_enter_powerdown, 86 .exit_latency = 500, 87 .target_residency = 2000, 88 .flags = CPUIDLE_FLAG_TIMER_STOP, 89 .name = "C1", 90 .desc = "ARM big-cluster power down", 91 }, 92 .state_count = 2, 93}; 94 95/* 96 * notrace prevents trace shims from getting inserted where they 97 * should not. Global jumps and ldrex/strex must not be inserted 98 * in power down sequences where caches and MMU may be turned off. 99 */ 100static int notrace bl_powerdown_finisher(unsigned long arg) 101{ 102 /* MCPM works with HW CPU identifiers */ 103 unsigned int mpidr = read_cpuid_mpidr(); 104 unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); 105 unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); 106 107 mcpm_set_entry_vector(cpu, cluster, cpu_resume); 108 mcpm_cpu_suspend(); 109 110 /* return value != 0 means failure */ 111 return 1; 112} 113 114/** 115 * bl_enter_powerdown - Programs CPU to enter the specified state 116 * @dev: cpuidle device 117 * @drv: The target state to be programmed 118 * @idx: state index 119 * 120 * Called from the CPUidle framework to program the device to the 121 * specified target state selected by the governor. 122 */ 123static int bl_enter_powerdown(struct cpuidle_device *dev, 124 struct cpuidle_driver *drv, int idx) 125{ 126 cpu_pm_enter(); 127 128 cpu_suspend(0, bl_powerdown_finisher); 129 130 /* signals the MCPM core that CPU is out of low power state */ 131 mcpm_cpu_powered_up(); 132 133 cpu_pm_exit(); 134 135 return idx; 136} 137 138static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int part_id) 139{ 140 struct cpumask *cpumask; 141 int cpu; 142 143 cpumask = kzalloc(cpumask_size(), GFP_KERNEL); 144 if (!cpumask) 145 return -ENOMEM; 146 147 for_each_possible_cpu(cpu) 148 if (smp_cpuid_part(cpu) == part_id) 149 cpumask_set_cpu(cpu, cpumask); 150 151 drv->cpumask = cpumask; 152 153 return 0; 154} 155 156static const struct of_device_id compatible_machine_match[] = { 157 { .compatible = "arm,vexpress,v2p-ca15_a7" }, 158 { .compatible = "google,peach" }, 159 {}, 160}; 161 162static int __init bl_idle_init(void) 163{ 164 int ret; 165 struct device_node *root = of_find_node_by_path("/"); 166 const struct of_device_id *match_id; 167 168 if (!root) 169 return -ENODEV; 170 171 /* 172 * Initialize the driver just for a compliant set of machines 173 */ 174 match_id = of_match_node(compatible_machine_match, root); 175 176 of_node_put(root); 177 178 if (!match_id) 179 return -ENODEV; 180 181 if (!mcpm_is_available()) 182 return -EUNATCH; 183 184 /* 185 * For now the differentiation between little and big cores 186 * is based on the part number. A7 cores are considered little 187 * cores, A15 are considered big cores. This distinction may 188 * evolve in the future with a more generic matching approach. 189 */ 190 ret = bl_idle_driver_init(&bl_idle_little_driver, 191 ARM_CPU_PART_CORTEX_A7); 192 if (ret) 193 return ret; 194 195 ret = bl_idle_driver_init(&bl_idle_big_driver, ARM_CPU_PART_CORTEX_A15); 196 if (ret) 197 goto out_uninit_little; 198 199 /* Start at index 1, index 0 standard WFI */ 200 ret = dt_init_idle_driver(&bl_idle_big_driver, bl_idle_state_match, 1); 201 if (ret < 0) 202 goto out_uninit_big; 203 204 /* Start at index 1, index 0 standard WFI */ 205 ret = dt_init_idle_driver(&bl_idle_little_driver, 206 bl_idle_state_match, 1); 207 if (ret < 0) 208 goto out_uninit_big; 209 210 ret = cpuidle_register(&bl_idle_little_driver, NULL); 211 if (ret) 212 goto out_uninit_big; 213 214 ret = cpuidle_register(&bl_idle_big_driver, NULL); 215 if (ret) 216 goto out_unregister_little; 217 218 return 0; 219 220out_unregister_little: 221 cpuidle_unregister(&bl_idle_little_driver); 222out_uninit_big: 223 kfree(bl_idle_big_driver.cpumask); 224out_uninit_little: 225 kfree(bl_idle_little_driver.cpumask); 226 227 return ret; 228} 229device_initcall(bl_idle_init);