otx2_cptlf.h (10996B)
1/* SPDX-License-Identifier: GPL-2.0-only 2 * Copyright (C) 2020 Marvell. 3 */ 4#ifndef __OTX2_CPTLF_H 5#define __OTX2_CPTLF_H 6 7#include <linux/soc/marvell/octeontx2/asm.h> 8#include <mbox.h> 9#include <rvu.h> 10#include "otx2_cpt_common.h" 11#include "otx2_cpt_reqmgr.h" 12 13/* 14 * CPT instruction and pending queues user requested length in CPT_INST_S msgs 15 */ 16#define OTX2_CPT_USER_REQUESTED_QLEN_MSGS 8200 17 18/* 19 * CPT instruction queue size passed to HW is in units of 40*CPT_INST_S 20 * messages. 21 */ 22#define OTX2_CPT_SIZE_DIV40 (OTX2_CPT_USER_REQUESTED_QLEN_MSGS/40) 23 24/* 25 * CPT instruction and pending queues length in CPT_INST_S messages 26 */ 27#define OTX2_CPT_INST_QLEN_MSGS ((OTX2_CPT_SIZE_DIV40 - 1) * 40) 28 29/* 30 * LDWB is getting incorrectly used when IQB_LDWB = 1 and CPT instruction 31 * queue has less than 320 free entries. So, increase HW instruction queue 32 * size by 320 and give 320 entries less for SW/NIX RX as a workaround. 33 */ 34#define OTX2_CPT_INST_QLEN_EXTRA_BYTES (320 * OTX2_CPT_INST_SIZE) 35#define OTX2_CPT_EXTRA_SIZE_DIV40 (320/40) 36 37/* CPT instruction queue length in bytes */ 38#define OTX2_CPT_INST_QLEN_BYTES \ 39 ((OTX2_CPT_SIZE_DIV40 * 40 * OTX2_CPT_INST_SIZE) + \ 40 OTX2_CPT_INST_QLEN_EXTRA_BYTES) 41 42/* CPT instruction group queue length in bytes */ 43#define OTX2_CPT_INST_GRP_QLEN_BYTES \ 44 ((OTX2_CPT_SIZE_DIV40 + OTX2_CPT_EXTRA_SIZE_DIV40) * 16) 45 46/* CPT FC length in bytes */ 47#define OTX2_CPT_Q_FC_LEN 128 48 49/* CPT instruction queue alignment */ 50#define OTX2_CPT_INST_Q_ALIGNMENT 128 51 52/* Mask which selects all engine groups */ 53#define OTX2_CPT_ALL_ENG_GRPS_MASK 0xFF 54 55/* Maximum LFs supported in OcteonTX2 for CPT */ 56#define OTX2_CPT_MAX_LFS_NUM 64 57 58/* Queue priority */ 59#define OTX2_CPT_QUEUE_HI_PRIO 0x1 60#define OTX2_CPT_QUEUE_LOW_PRIO 0x0 61 62enum otx2_cptlf_state { 63 OTX2_CPTLF_IN_RESET, 64 OTX2_CPTLF_STARTED, 65}; 66 67struct otx2_cpt_inst_queue { 68 u8 *vaddr; 69 u8 *real_vaddr; 70 dma_addr_t dma_addr; 71 dma_addr_t real_dma_addr; 72 u32 size; 73}; 74 75struct otx2_cptlfs_info; 76struct otx2_cptlf_wqe { 77 struct tasklet_struct work; 78 struct otx2_cptlfs_info *lfs; 79 u8 lf_num; 80}; 81 82struct otx2_cptlf_info { 83 struct otx2_cptlfs_info *lfs; /* Ptr to cptlfs_info struct */ 84 void __iomem *lmtline; /* Address of LMTLINE */ 85 void __iomem *ioreg; /* LMTLINE send register */ 86 int msix_offset; /* MSI-X interrupts offset */ 87 cpumask_var_t affinity_mask; /* IRQs affinity mask */ 88 u8 irq_name[OTX2_CPT_LF_MSIX_VECTORS][32];/* Interrupts name */ 89 u8 is_irq_reg[OTX2_CPT_LF_MSIX_VECTORS]; /* Is interrupt registered */ 90 u8 slot; /* Slot number of this LF */ 91 92 struct otx2_cpt_inst_queue iqueue;/* Instruction queue */ 93 struct otx2_cpt_pending_queue pqueue; /* Pending queue */ 94 struct otx2_cptlf_wqe *wqe; /* Tasklet work info */ 95}; 96 97struct cpt_hw_ops { 98 void (*send_cmd)(union otx2_cpt_inst_s *cptinst, u32 insts_num, 99 struct otx2_cptlf_info *lf); 100 u8 (*cpt_get_compcode)(union otx2_cpt_res_s *result); 101 u8 (*cpt_get_uc_compcode)(union otx2_cpt_res_s *result); 102}; 103 104struct otx2_cptlfs_info { 105 /* Registers start address of VF/PF LFs are attached to */ 106 void __iomem *reg_base; 107#define LMTLINE_SIZE 128 108 void __iomem *lmt_base; 109 struct pci_dev *pdev; /* Device LFs are attached to */ 110 struct otx2_cptlf_info lf[OTX2_CPT_MAX_LFS_NUM]; 111 struct otx2_mbox *mbox; 112 struct cpt_hw_ops *ops; 113 u8 are_lfs_attached; /* Whether CPT LFs are attached */ 114 u8 lfs_num; /* Number of CPT LFs */ 115 u8 kcrypto_eng_grp_num; /* Kernel crypto engine group number */ 116 u8 kvf_limits; /* Kernel crypto limits */ 117 atomic_t state; /* LF's state. started/reset */ 118 int blkaddr; /* CPT blkaddr: BLKADDR_CPT0/BLKADDR_CPT1 */ 119}; 120 121static inline void otx2_cpt_free_instruction_queues( 122 struct otx2_cptlfs_info *lfs) 123{ 124 struct otx2_cpt_inst_queue *iq; 125 int i; 126 127 for (i = 0; i < lfs->lfs_num; i++) { 128 iq = &lfs->lf[i].iqueue; 129 if (iq->real_vaddr) 130 dma_free_coherent(&lfs->pdev->dev, 131 iq->size, 132 iq->real_vaddr, 133 iq->real_dma_addr); 134 iq->real_vaddr = NULL; 135 iq->vaddr = NULL; 136 } 137} 138 139static inline int otx2_cpt_alloc_instruction_queues( 140 struct otx2_cptlfs_info *lfs) 141{ 142 struct otx2_cpt_inst_queue *iq; 143 int ret = 0, i; 144 145 if (!lfs->lfs_num) 146 return -EINVAL; 147 148 for (i = 0; i < lfs->lfs_num; i++) { 149 iq = &lfs->lf[i].iqueue; 150 iq->size = OTX2_CPT_INST_QLEN_BYTES + 151 OTX2_CPT_Q_FC_LEN + 152 OTX2_CPT_INST_GRP_QLEN_BYTES + 153 OTX2_CPT_INST_Q_ALIGNMENT; 154 iq->real_vaddr = dma_alloc_coherent(&lfs->pdev->dev, iq->size, 155 &iq->real_dma_addr, GFP_KERNEL); 156 if (!iq->real_vaddr) { 157 ret = -ENOMEM; 158 goto error; 159 } 160 iq->vaddr = iq->real_vaddr + OTX2_CPT_INST_GRP_QLEN_BYTES; 161 iq->dma_addr = iq->real_dma_addr + OTX2_CPT_INST_GRP_QLEN_BYTES; 162 163 /* Align pointers */ 164 iq->vaddr = PTR_ALIGN(iq->vaddr, OTX2_CPT_INST_Q_ALIGNMENT); 165 iq->dma_addr = PTR_ALIGN(iq->dma_addr, 166 OTX2_CPT_INST_Q_ALIGNMENT); 167 } 168 return 0; 169 170error: 171 otx2_cpt_free_instruction_queues(lfs); 172 return ret; 173} 174 175static inline void otx2_cptlf_set_iqueues_base_addr( 176 struct otx2_cptlfs_info *lfs) 177{ 178 union otx2_cptx_lf_q_base lf_q_base; 179 int slot; 180 181 for (slot = 0; slot < lfs->lfs_num; slot++) { 182 lf_q_base.u = lfs->lf[slot].iqueue.dma_addr; 183 otx2_cpt_write64(lfs->reg_base, BLKADDR_CPT0, slot, 184 OTX2_CPT_LF_Q_BASE, lf_q_base.u); 185 } 186} 187 188static inline void otx2_cptlf_do_set_iqueue_size(struct otx2_cptlf_info *lf) 189{ 190 union otx2_cptx_lf_q_size lf_q_size = { .u = 0x0 }; 191 192 lf_q_size.s.size_div40 = OTX2_CPT_SIZE_DIV40 + 193 OTX2_CPT_EXTRA_SIZE_DIV40; 194 otx2_cpt_write64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 195 OTX2_CPT_LF_Q_SIZE, lf_q_size.u); 196} 197 198static inline void otx2_cptlf_set_iqueues_size(struct otx2_cptlfs_info *lfs) 199{ 200 int slot; 201 202 for (slot = 0; slot < lfs->lfs_num; slot++) 203 otx2_cptlf_do_set_iqueue_size(&lfs->lf[slot]); 204} 205 206static inline void otx2_cptlf_do_disable_iqueue(struct otx2_cptlf_info *lf) 207{ 208 union otx2_cptx_lf_ctl lf_ctl = { .u = 0x0 }; 209 union otx2_cptx_lf_inprog lf_inprog; 210 int timeout = 20; 211 212 /* Disable instructions enqueuing */ 213 otx2_cpt_write64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 214 OTX2_CPT_LF_CTL, lf_ctl.u); 215 216 /* Wait for instruction queue to become empty */ 217 do { 218 lf_inprog.u = otx2_cpt_read64(lf->lfs->reg_base, BLKADDR_CPT0, 219 lf->slot, OTX2_CPT_LF_INPROG); 220 if (!lf_inprog.s.inflight) 221 break; 222 223 usleep_range(10000, 20000); 224 if (timeout-- < 0) { 225 dev_err(&lf->lfs->pdev->dev, 226 "Error LF %d is still busy.\n", lf->slot); 227 break; 228 } 229 230 } while (1); 231 232 /* 233 * Disable executions in the LF's queue, 234 * the queue should be empty at this point 235 */ 236 lf_inprog.s.eena = 0x0; 237 otx2_cpt_write64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 238 OTX2_CPT_LF_INPROG, lf_inprog.u); 239} 240 241static inline void otx2_cptlf_disable_iqueues(struct otx2_cptlfs_info *lfs) 242{ 243 int slot; 244 245 for (slot = 0; slot < lfs->lfs_num; slot++) 246 otx2_cptlf_do_disable_iqueue(&lfs->lf[slot]); 247} 248 249static inline void otx2_cptlf_set_iqueue_enq(struct otx2_cptlf_info *lf, 250 bool enable) 251{ 252 union otx2_cptx_lf_ctl lf_ctl; 253 254 lf_ctl.u = otx2_cpt_read64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 255 OTX2_CPT_LF_CTL); 256 257 /* Set iqueue's enqueuing */ 258 lf_ctl.s.ena = enable ? 0x1 : 0x0; 259 otx2_cpt_write64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 260 OTX2_CPT_LF_CTL, lf_ctl.u); 261} 262 263static inline void otx2_cptlf_enable_iqueue_enq(struct otx2_cptlf_info *lf) 264{ 265 otx2_cptlf_set_iqueue_enq(lf, true); 266} 267 268static inline void otx2_cptlf_set_iqueue_exec(struct otx2_cptlf_info *lf, 269 bool enable) 270{ 271 union otx2_cptx_lf_inprog lf_inprog; 272 273 lf_inprog.u = otx2_cpt_read64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 274 OTX2_CPT_LF_INPROG); 275 276 /* Set iqueue's execution */ 277 lf_inprog.s.eena = enable ? 0x1 : 0x0; 278 otx2_cpt_write64(lf->lfs->reg_base, BLKADDR_CPT0, lf->slot, 279 OTX2_CPT_LF_INPROG, lf_inprog.u); 280} 281 282static inline void otx2_cptlf_enable_iqueue_exec(struct otx2_cptlf_info *lf) 283{ 284 otx2_cptlf_set_iqueue_exec(lf, true); 285} 286 287static inline void otx2_cptlf_disable_iqueue_exec(struct otx2_cptlf_info *lf) 288{ 289 otx2_cptlf_set_iqueue_exec(lf, false); 290} 291 292static inline void otx2_cptlf_enable_iqueues(struct otx2_cptlfs_info *lfs) 293{ 294 int slot; 295 296 for (slot = 0; slot < lfs->lfs_num; slot++) { 297 otx2_cptlf_enable_iqueue_exec(&lfs->lf[slot]); 298 otx2_cptlf_enable_iqueue_enq(&lfs->lf[slot]); 299 } 300} 301 302static inline void otx2_cpt_fill_inst(union otx2_cpt_inst_s *cptinst, 303 struct otx2_cpt_iq_command *iq_cmd, 304 u64 comp_baddr) 305{ 306 cptinst->u[0] = 0x0; 307 cptinst->s.doneint = true; 308 cptinst->s.res_addr = comp_baddr; 309 cptinst->u[2] = 0x0; 310 cptinst->u[3] = 0x0; 311 cptinst->s.ei0 = iq_cmd->cmd.u; 312 cptinst->s.ei1 = iq_cmd->dptr; 313 cptinst->s.ei2 = iq_cmd->rptr; 314 cptinst->s.ei3 = iq_cmd->cptr.u; 315} 316 317/* 318 * On OcteonTX2 platform the parameter insts_num is used as a count of 319 * instructions to be enqueued. The valid values for insts_num are: 320 * 1 - 1 CPT instruction will be enqueued during LMTST operation 321 * 2 - 2 CPT instructions will be enqueued during LMTST operation 322 */ 323static inline void otx2_cpt_send_cmd(union otx2_cpt_inst_s *cptinst, 324 u32 insts_num, struct otx2_cptlf_info *lf) 325{ 326 void __iomem *lmtline = lf->lmtline; 327 long ret; 328 329 /* 330 * Make sure memory areas pointed in CPT_INST_S 331 * are flushed before the instruction is sent to CPT 332 */ 333 dma_wmb(); 334 335 do { 336 /* Copy CPT command to LMTLINE */ 337 memcpy_toio(lmtline, cptinst, insts_num * OTX2_CPT_INST_SIZE); 338 339 /* 340 * LDEOR initiates atomic transfer to I/O device 341 * The following will cause the LMTST to fail (the LDEOR 342 * returns zero): 343 * - No stores have been performed to the LMTLINE since it was 344 * last invalidated. 345 * - The bytes which have been stored to LMTLINE since it was 346 * last invalidated form a pattern that is non-contiguous, does 347 * not start at byte 0, or does not end on a 8-byte boundary. 348 * (i.e.comprises a formation of other than 1–16 8-byte 349 * words.) 350 * 351 * These rules are designed such that an operating system 352 * context switch or hypervisor guest switch need have no 353 * knowledge of the LMTST operations; the switch code does not 354 * need to store to LMTCANCEL. Also note as LMTLINE data cannot 355 * be read, there is no information leakage between processes. 356 */ 357 ret = otx2_lmt_flush(lf->ioreg); 358 359 } while (!ret); 360} 361 362static inline bool otx2_cptlf_started(struct otx2_cptlfs_info *lfs) 363{ 364 return atomic_read(&lfs->state) == OTX2_CPTLF_STARTED; 365} 366 367int otx2_cptlf_init(struct otx2_cptlfs_info *lfs, u8 eng_grp_msk, int pri, 368 int lfs_num); 369void otx2_cptlf_shutdown(struct otx2_cptlfs_info *lfs); 370int otx2_cptlf_register_interrupts(struct otx2_cptlfs_info *lfs); 371void otx2_cptlf_unregister_interrupts(struct otx2_cptlfs_info *lfs); 372void otx2_cptlf_free_irqs_affinity(struct otx2_cptlfs_info *lfs); 373int otx2_cptlf_set_irqs_affinity(struct otx2_cptlfs_info *lfs); 374 375#endif /* __OTX2_CPTLF_H */