gpio-wcove.c (13203B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Intel Whiskey Cove PMIC GPIO Driver 4 * 5 * This driver is written based on gpio-crystalcove.c 6 * 7 * Copyright (C) 2016 Intel Corporation. All rights reserved. 8 */ 9 10#include <linux/bitops.h> 11#include <linux/gpio/driver.h> 12#include <linux/interrupt.h> 13#include <linux/mfd/intel_soc_pmic.h> 14#include <linux/module.h> 15#include <linux/platform_device.h> 16#include <linux/regmap.h> 17#include <linux/seq_file.h> 18 19/* 20 * Whiskey Cove PMIC has 13 physical GPIO pins divided into 3 banks: 21 * Bank 0: Pin 0 - 6 22 * Bank 1: Pin 7 - 10 23 * Bank 2: Pin 11 - 12 24 * Each pin has one output control register and one input control register. 25 */ 26#define BANK0_NR_PINS 7 27#define BANK1_NR_PINS 4 28#define BANK2_NR_PINS 2 29#define WCOVE_GPIO_NUM (BANK0_NR_PINS + BANK1_NR_PINS + BANK2_NR_PINS) 30#define WCOVE_VGPIO_NUM 94 31/* GPIO output control registers (one per pin): 0x4e44 - 0x4e50 */ 32#define GPIO_OUT_CTRL_BASE 0x4e44 33/* GPIO input control registers (one per pin): 0x4e51 - 0x4e5d */ 34#define GPIO_IN_CTRL_BASE 0x4e51 35 36/* 37 * GPIO interrupts are organized in two groups: 38 * Group 0: Bank 0 pins (Pin 0 - 6) 39 * Group 1: Bank 1 and Bank 2 pins (Pin 7 - 12) 40 * Each group has two registers (one bit per pin): status and mask. 41 */ 42#define GROUP0_NR_IRQS 7 43#define GROUP1_NR_IRQS 6 44#define IRQ_MASK_BASE 0x4e19 45#define IRQ_STATUS_BASE 0x4e0b 46#define GPIO_IRQ0_MASK GENMASK(6, 0) 47#define GPIO_IRQ1_MASK GENMASK(5, 0) 48#define UPDATE_IRQ_TYPE BIT(0) 49#define UPDATE_IRQ_MASK BIT(1) 50 51#define CTLI_INTCNT_DIS (0 << 1) 52#define CTLI_INTCNT_NE (1 << 1) 53#define CTLI_INTCNT_PE (2 << 1) 54#define CTLI_INTCNT_BE (3 << 1) 55 56#define CTLO_DIR_IN (0 << 5) 57#define CTLO_DIR_OUT (1 << 5) 58 59#define CTLO_DRV_MASK (1 << 4) 60#define CTLO_DRV_OD (0 << 4) 61#define CTLO_DRV_CMOS (1 << 4) 62 63#define CTLO_DRV_REN (1 << 3) 64 65#define CTLO_RVAL_2KDOWN (0 << 1) 66#define CTLO_RVAL_2KUP (1 << 1) 67#define CTLO_RVAL_50KDOWN (2 << 1) 68#define CTLO_RVAL_50KUP (3 << 1) 69 70#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP) 71#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET) 72 73enum ctrl_register { 74 CTRL_IN, 75 CTRL_OUT, 76 IRQ_STATUS, 77 IRQ_MASK, 78}; 79 80/* 81 * struct wcove_gpio - Whiskey Cove GPIO controller 82 * @buslock: for bus lock/sync and unlock. 83 * @chip: the abstract gpio_chip structure. 84 * @dev: the gpio device 85 * @regmap: the regmap from the parent device. 86 * @regmap_irq_chip: the regmap of the gpio irq chip. 87 * @update: pending IRQ setting update, to be written to the chip upon unlock. 88 * @intcnt: the Interrupt Detect value to be written. 89 * @set_irq_mask: true if the IRQ mask needs to be set, false to clear. 90 */ 91struct wcove_gpio { 92 struct mutex buslock; 93 struct gpio_chip chip; 94 struct device *dev; 95 struct regmap *regmap; 96 struct regmap_irq_chip_data *regmap_irq_chip; 97 int update; 98 int intcnt; 99 bool set_irq_mask; 100}; 101 102static inline int to_reg(int gpio, enum ctrl_register type) 103{ 104 unsigned int reg = type == CTRL_IN ? GPIO_IN_CTRL_BASE : GPIO_OUT_CTRL_BASE; 105 106 if (gpio >= WCOVE_GPIO_NUM) 107 return -EOPNOTSUPP; 108 109 return reg + gpio; 110} 111 112static inline int to_ireg(int gpio, enum ctrl_register type, unsigned int *mask) 113{ 114 unsigned int reg = type == IRQ_STATUS ? IRQ_STATUS_BASE : IRQ_MASK_BASE; 115 116 if (gpio < GROUP0_NR_IRQS) { 117 reg += 0; 118 *mask = BIT(gpio); 119 } else { 120 reg += 1; 121 *mask = BIT(gpio - GROUP0_NR_IRQS); 122 } 123 124 return reg; 125} 126 127static void wcove_update_irq_mask(struct wcove_gpio *wg, irq_hw_number_t gpio) 128{ 129 unsigned int mask, reg = to_ireg(gpio, IRQ_MASK, &mask); 130 131 if (wg->set_irq_mask) 132 regmap_set_bits(wg->regmap, reg, mask); 133 else 134 regmap_clear_bits(wg->regmap, reg, mask); 135} 136 137static void wcove_update_irq_ctrl(struct wcove_gpio *wg, irq_hw_number_t gpio) 138{ 139 int reg = to_reg(gpio, CTRL_IN); 140 141 regmap_update_bits(wg->regmap, reg, CTLI_INTCNT_BE, wg->intcnt); 142} 143 144static int wcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio) 145{ 146 struct wcove_gpio *wg = gpiochip_get_data(chip); 147 int reg = to_reg(gpio, CTRL_OUT); 148 149 if (reg < 0) 150 return 0; 151 152 return regmap_write(wg->regmap, reg, CTLO_INPUT_SET); 153} 154 155static int wcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio, 156 int value) 157{ 158 struct wcove_gpio *wg = gpiochip_get_data(chip); 159 int reg = to_reg(gpio, CTRL_OUT); 160 161 if (reg < 0) 162 return 0; 163 164 return regmap_write(wg->regmap, reg, CTLO_OUTPUT_SET | value); 165} 166 167static int wcove_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio) 168{ 169 struct wcove_gpio *wg = gpiochip_get_data(chip); 170 unsigned int val; 171 int ret, reg = to_reg(gpio, CTRL_OUT); 172 173 if (reg < 0) 174 return GPIO_LINE_DIRECTION_OUT; 175 176 ret = regmap_read(wg->regmap, reg, &val); 177 if (ret) 178 return ret; 179 180 if (val & CTLO_DIR_OUT) 181 return GPIO_LINE_DIRECTION_OUT; 182 183 return GPIO_LINE_DIRECTION_IN; 184} 185 186static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio) 187{ 188 struct wcove_gpio *wg = gpiochip_get_data(chip); 189 unsigned int val; 190 int ret, reg = to_reg(gpio, CTRL_IN); 191 192 if (reg < 0) 193 return 0; 194 195 ret = regmap_read(wg->regmap, reg, &val); 196 if (ret) 197 return ret; 198 199 return val & 0x1; 200} 201 202static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value) 203{ 204 struct wcove_gpio *wg = gpiochip_get_data(chip); 205 int reg = to_reg(gpio, CTRL_OUT); 206 207 if (reg < 0) 208 return; 209 210 if (value) 211 regmap_set_bits(wg->regmap, reg, 1); 212 else 213 regmap_clear_bits(wg->regmap, reg, 1); 214} 215 216static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio, 217 unsigned long config) 218{ 219 struct wcove_gpio *wg = gpiochip_get_data(chip); 220 int reg = to_reg(gpio, CTRL_OUT); 221 222 if (reg < 0) 223 return 0; 224 225 switch (pinconf_to_config_param(config)) { 226 case PIN_CONFIG_DRIVE_OPEN_DRAIN: 227 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, 228 CTLO_DRV_OD); 229 case PIN_CONFIG_DRIVE_PUSH_PULL: 230 return regmap_update_bits(wg->regmap, reg, CTLO_DRV_MASK, 231 CTLO_DRV_CMOS); 232 default: 233 break; 234 } 235 236 return -ENOTSUPP; 237} 238 239static int wcove_irq_type(struct irq_data *data, unsigned int type) 240{ 241 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 242 struct wcove_gpio *wg = gpiochip_get_data(chip); 243 irq_hw_number_t gpio = irqd_to_hwirq(data); 244 245 if (gpio >= WCOVE_GPIO_NUM) 246 return 0; 247 248 switch (type) { 249 case IRQ_TYPE_NONE: 250 wg->intcnt = CTLI_INTCNT_DIS; 251 break; 252 case IRQ_TYPE_EDGE_BOTH: 253 wg->intcnt = CTLI_INTCNT_BE; 254 break; 255 case IRQ_TYPE_EDGE_RISING: 256 wg->intcnt = CTLI_INTCNT_PE; 257 break; 258 case IRQ_TYPE_EDGE_FALLING: 259 wg->intcnt = CTLI_INTCNT_NE; 260 break; 261 default: 262 return -EINVAL; 263 } 264 265 wg->update |= UPDATE_IRQ_TYPE; 266 267 return 0; 268} 269 270static void wcove_bus_lock(struct irq_data *data) 271{ 272 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 273 struct wcove_gpio *wg = gpiochip_get_data(chip); 274 275 mutex_lock(&wg->buslock); 276} 277 278static void wcove_bus_sync_unlock(struct irq_data *data) 279{ 280 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 281 struct wcove_gpio *wg = gpiochip_get_data(chip); 282 irq_hw_number_t gpio = irqd_to_hwirq(data); 283 284 if (wg->update & UPDATE_IRQ_TYPE) 285 wcove_update_irq_ctrl(wg, gpio); 286 if (wg->update & UPDATE_IRQ_MASK) 287 wcove_update_irq_mask(wg, gpio); 288 wg->update = 0; 289 290 mutex_unlock(&wg->buslock); 291} 292 293static void wcove_irq_unmask(struct irq_data *data) 294{ 295 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 296 struct wcove_gpio *wg = gpiochip_get_data(chip); 297 irq_hw_number_t gpio = irqd_to_hwirq(data); 298 299 if (gpio >= WCOVE_GPIO_NUM) 300 return; 301 302 gpiochip_enable_irq(chip, gpio); 303 304 wg->set_irq_mask = false; 305 wg->update |= UPDATE_IRQ_MASK; 306} 307 308static void wcove_irq_mask(struct irq_data *data) 309{ 310 struct gpio_chip *chip = irq_data_get_irq_chip_data(data); 311 struct wcove_gpio *wg = gpiochip_get_data(chip); 312 irq_hw_number_t gpio = irqd_to_hwirq(data); 313 314 if (gpio >= WCOVE_GPIO_NUM) 315 return; 316 317 wg->set_irq_mask = true; 318 wg->update |= UPDATE_IRQ_MASK; 319 320 gpiochip_disable_irq(chip, gpio); 321} 322 323static const struct irq_chip wcove_irqchip = { 324 .name = "Whiskey Cove", 325 .irq_mask = wcove_irq_mask, 326 .irq_unmask = wcove_irq_unmask, 327 .irq_set_type = wcove_irq_type, 328 .irq_bus_lock = wcove_bus_lock, 329 .irq_bus_sync_unlock = wcove_bus_sync_unlock, 330 .flags = IRQCHIP_IMMUTABLE, 331 GPIOCHIP_IRQ_RESOURCE_HELPERS, 332}; 333 334static irqreturn_t wcove_gpio_irq_handler(int irq, void *data) 335{ 336 struct wcove_gpio *wg = (struct wcove_gpio *)data; 337 unsigned int virq, gpio; 338 unsigned long pending; 339 u8 p[2]; 340 341 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { 342 dev_err(wg->dev, "Failed to read irq status register\n"); 343 return IRQ_NONE; 344 } 345 346 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); 347 if (!pending) 348 return IRQ_NONE; 349 350 /* Iterate until no interrupt is pending */ 351 while (pending) { 352 /* One iteration is for all pending bits */ 353 for_each_set_bit(gpio, &pending, WCOVE_GPIO_NUM) { 354 unsigned int mask, reg = to_ireg(gpio, IRQ_STATUS, &mask); 355 356 virq = irq_find_mapping(wg->chip.irq.domain, gpio); 357 handle_nested_irq(virq); 358 regmap_set_bits(wg->regmap, reg, mask); 359 } 360 361 /* Next iteration */ 362 if (regmap_bulk_read(wg->regmap, IRQ_STATUS_BASE, p, 2)) { 363 dev_err(wg->dev, "Failed to read irq status\n"); 364 break; 365 } 366 367 pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7); 368 } 369 370 return IRQ_HANDLED; 371} 372 373static void wcove_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) 374{ 375 unsigned int ctlo, ctli, irq_mask, irq_status; 376 struct wcove_gpio *wg = gpiochip_get_data(chip); 377 int gpio, mask, ret = 0; 378 379 for (gpio = 0; gpio < WCOVE_GPIO_NUM; gpio++) { 380 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_OUT), &ctlo); 381 ret += regmap_read(wg->regmap, to_reg(gpio, CTRL_IN), &ctli); 382 if (ret) { 383 dev_err(wg->dev, "Failed to read registers: CTRL out/in\n"); 384 break; 385 } 386 387 ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_MASK, &mask), &irq_mask); 388 ret += regmap_read(wg->regmap, to_ireg(gpio, IRQ_STATUS, &mask), &irq_status); 389 if (ret) { 390 dev_err(wg->dev, "Failed to read registers: IRQ status/mask\n"); 391 break; 392 } 393 394 seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s\n", 395 gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ", 396 ctli & 0x1 ? "hi" : "lo", 397 ctli & CTLI_INTCNT_NE ? "fall" : " ", 398 ctli & CTLI_INTCNT_PE ? "rise" : " ", 399 ctlo, 400 irq_mask & mask ? "mask " : "unmask", 401 irq_status & mask ? "pending" : " "); 402 } 403} 404 405static int wcove_gpio_probe(struct platform_device *pdev) 406{ 407 struct intel_soc_pmic *pmic; 408 struct wcove_gpio *wg; 409 int virq, ret, irq; 410 struct device *dev; 411 struct gpio_irq_chip *girq; 412 413 /* 414 * This gpio platform device is created by a mfd device (see 415 * drivers/mfd/intel_soc_pmic_bxtwc.c for details). Information 416 * shared by all sub-devices created by the mfd device, the regmap 417 * pointer for instance, is stored as driver data of the mfd device 418 * driver. 419 */ 420 pmic = dev_get_drvdata(pdev->dev.parent); 421 if (!pmic) 422 return -ENODEV; 423 424 irq = platform_get_irq(pdev, 0); 425 if (irq < 0) 426 return irq; 427 428 dev = &pdev->dev; 429 430 wg = devm_kzalloc(dev, sizeof(*wg), GFP_KERNEL); 431 if (!wg) 432 return -ENOMEM; 433 434 wg->regmap_irq_chip = pmic->irq_chip_data; 435 436 platform_set_drvdata(pdev, wg); 437 438 mutex_init(&wg->buslock); 439 wg->chip.label = KBUILD_MODNAME; 440 wg->chip.direction_input = wcove_gpio_dir_in; 441 wg->chip.direction_output = wcove_gpio_dir_out; 442 wg->chip.get_direction = wcove_gpio_get_direction; 443 wg->chip.get = wcove_gpio_get; 444 wg->chip.set = wcove_gpio_set; 445 wg->chip.set_config = wcove_gpio_set_config; 446 wg->chip.base = -1; 447 wg->chip.ngpio = WCOVE_VGPIO_NUM; 448 wg->chip.can_sleep = true; 449 wg->chip.parent = pdev->dev.parent; 450 wg->chip.dbg_show = wcove_gpio_dbg_show; 451 wg->dev = dev; 452 wg->regmap = pmic->regmap; 453 454 virq = regmap_irq_get_virq(wg->regmap_irq_chip, irq); 455 if (virq < 0) { 456 dev_err(dev, "Failed to get virq by irq %d\n", irq); 457 return virq; 458 } 459 460 girq = &wg->chip.irq; 461 gpio_irq_chip_set_chip(girq, &wcove_irqchip); 462 /* This will let us handle the parent IRQ in the driver */ 463 girq->parent_handler = NULL; 464 girq->num_parents = 0; 465 girq->parents = NULL; 466 girq->default_type = IRQ_TYPE_NONE; 467 girq->handler = handle_simple_irq; 468 girq->threaded = true; 469 470 ret = devm_request_threaded_irq(dev, virq, NULL, wcove_gpio_irq_handler, 471 IRQF_ONESHOT, pdev->name, wg); 472 if (ret) { 473 dev_err(dev, "Failed to request irq %d\n", virq); 474 return ret; 475 } 476 477 ret = devm_gpiochip_add_data(dev, &wg->chip, wg); 478 if (ret) { 479 dev_err(dev, "Failed to add gpiochip: %d\n", ret); 480 return ret; 481 } 482 483 /* Enable GPIO0 interrupts */ 484 ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 0, GPIO_IRQ0_MASK); 485 if (ret) 486 return ret; 487 488 /* Enable GPIO1 interrupts */ 489 ret = regmap_clear_bits(wg->regmap, IRQ_MASK_BASE + 1, GPIO_IRQ1_MASK); 490 if (ret) 491 return ret; 492 493 return 0; 494} 495 496/* 497 * Whiskey Cove PMIC itself is a analog device(but with digital control 498 * interface) providing power management support for other devices in 499 * the accompanied SoC, so we have no .pm for Whiskey Cove GPIO driver. 500 */ 501static struct platform_driver wcove_gpio_driver = { 502 .driver = { 503 .name = "bxt_wcove_gpio", 504 }, 505 .probe = wcove_gpio_probe, 506}; 507 508module_platform_driver(wcove_gpio_driver); 509 510MODULE_AUTHOR("Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com>"); 511MODULE_AUTHOR("Bin Gao <bin.gao@intel.com>"); 512MODULE_DESCRIPTION("Intel Whiskey Cove GPIO Driver"); 513MODULE_LICENSE("GPL v2"); 514MODULE_ALIAS("platform:bxt_wcove_gpio");