dcn21_init.c (6830B)
1/* 2 * Copyright 2016-2020 Advanced Micro Devices, Inc. 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a 5 * copy of this software and associated documentation files (the "Software"), 6 * to deal in the Software without restriction, including without limitation 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 8 * and/or sell copies of the Software, and to permit persons to whom the 9 * Software is furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR 18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 20 * OTHER DEALINGS IN THE SOFTWARE. 21 * 22 * Authors: AMD 23 * 24 */ 25 26#include "dce110/dce110_hw_sequencer.h" 27#include "dcn10/dcn10_hw_sequencer.h" 28#include "dcn20/dcn20_hwseq.h" 29#include "dcn21_hwseq.h" 30 31#include "dcn21_init.h" 32 33static const struct hw_sequencer_funcs dcn21_funcs = { 34 .program_gamut_remap = dcn10_program_gamut_remap, 35 .init_hw = dcn10_init_hw, 36 .power_down_on_boot = dcn10_power_down_on_boot, 37 .apply_ctx_to_hw = dce110_apply_ctx_to_hw, 38 .apply_ctx_for_surface = NULL, 39 .program_front_end_for_ctx = dcn20_program_front_end_for_ctx, 40 .wait_for_pending_cleared = dcn10_wait_for_pending_cleared, 41 .post_unlock_program_front_end = dcn20_post_unlock_program_front_end, 42 .update_plane_addr = dcn20_update_plane_addr, 43 .update_dchub = dcn10_update_dchub, 44 .update_pending_status = dcn10_update_pending_status, 45 .program_output_csc = dcn20_program_output_csc, 46 .enable_accelerated_mode = dce110_enable_accelerated_mode, 47 .enable_timing_synchronization = dcn10_enable_timing_synchronization, 48 .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset, 49 .update_info_frame = dce110_update_info_frame, 50 .send_immediate_sdp_message = dcn10_send_immediate_sdp_message, 51 .enable_stream = dcn20_enable_stream, 52 .disable_stream = dce110_disable_stream, 53 .unblank_stream = dcn20_unblank_stream, 54 .blank_stream = dce110_blank_stream, 55 .enable_audio_stream = dce110_enable_audio_stream, 56 .disable_audio_stream = dce110_disable_audio_stream, 57 .disable_plane = dcn20_disable_plane, 58 .pipe_control_lock = dcn20_pipe_control_lock, 59 .interdependent_update_lock = dcn10_lock_all_pipes, 60 .cursor_lock = dcn10_cursor_lock, 61 .prepare_bandwidth = dcn20_prepare_bandwidth, 62 .optimize_bandwidth = dcn20_optimize_bandwidth, 63 .update_bandwidth = dcn20_update_bandwidth, 64 .set_drr = dcn10_set_drr, 65 .get_position = dcn10_get_position, 66 .set_static_screen_control = dcn10_set_static_screen_control, 67 .setup_stereo = dcn10_setup_stereo, 68 .set_avmute = dce110_set_avmute, 69 .log_hw_state = dcn10_log_hw_state, 70 .get_hw_state = dcn10_get_hw_state, 71 .clear_status_bits = dcn10_clear_status_bits, 72 .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect, 73 .edp_backlight_control = dce110_edp_backlight_control, 74 .edp_power_control = dce110_edp_power_control, 75 .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready, 76 .set_cursor_position = dcn10_set_cursor_position, 77 .set_cursor_attribute = dcn10_set_cursor_attribute, 78 .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level, 79 .setup_periodic_interrupt = dcn10_setup_periodic_interrupt, 80 .set_clock = dcn10_set_clock, 81 .get_clock = dcn10_get_clock, 82 .program_triplebuffer = dcn20_program_triple_buffer, 83 .enable_writeback = dcn20_enable_writeback, 84 .disable_writeback = dcn20_disable_writeback, 85 .dmdata_status_done = dcn20_dmdata_status_done, 86 .program_dmdata_engine = dcn20_program_dmdata_engine, 87 .set_dmdata_attributes = dcn20_set_dmdata_attributes, 88 .init_sys_ctx = dcn21_init_sys_ctx, 89 .init_vm_ctx = dcn20_init_vm_ctx, 90 .set_flip_control_gsl = dcn20_set_flip_control_gsl, 91 .optimize_pwr_state = dcn21_optimize_pwr_state, 92 .exit_optimized_pwr_state = dcn21_exit_optimized_pwr_state, 93 .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync, 94 .calc_vupdate_position = dcn10_calc_vupdate_position, 95 .power_down = dce110_power_down, 96 .set_backlight_level = dcn21_set_backlight_level, 97 .set_abm_immediate_disable = dcn21_set_abm_immediate_disable, 98 .set_pipe = dcn21_set_pipe, 99#ifndef TRIM_FSFT 100 .optimize_timing_for_fsft = dcn20_optimize_timing_for_fsft, 101#endif 102 .is_abm_supported = dcn21_is_abm_supported, 103 .set_disp_pattern_generator = dcn20_set_disp_pattern_generator, 104 .get_dcc_en_bits = dcn10_get_dcc_en_bits, 105 .update_visual_confirm_color = dcn20_update_visual_confirm_color, 106}; 107 108static const struct hwseq_private_funcs dcn21_private_funcs = { 109 .init_pipes = dcn10_init_pipes, 110 .update_plane_addr = dcn20_update_plane_addr, 111 .plane_atomic_disconnect = dcn10_plane_atomic_disconnect, 112 .update_mpcc = dcn20_update_mpcc, 113 .set_input_transfer_func = dcn20_set_input_transfer_func, 114 .set_output_transfer_func = dcn20_set_output_transfer_func, 115 .power_down = dce110_power_down, 116 .enable_display_power_gating = dcn10_dummy_display_power_gating, 117 .blank_pixel_data = dcn20_blank_pixel_data, 118 .reset_hw_ctx_wrap = dcn20_reset_hw_ctx_wrap, 119 .enable_stream_timing = dcn20_enable_stream_timing, 120 .edp_backlight_control = dce110_edp_backlight_control, 121 .disable_stream_gating = dcn20_disable_stream_gating, 122 .enable_stream_gating = dcn20_enable_stream_gating, 123 .setup_vupdate_interrupt = dcn20_setup_vupdate_interrupt, 124 .did_underflow_occur = dcn10_did_underflow_occur, 125 .init_blank = dcn20_init_blank, 126 .disable_vga = dcn20_disable_vga, 127 .bios_golden_init = dcn10_bios_golden_init, 128 .plane_atomic_disable = dcn20_plane_atomic_disable, 129 .plane_atomic_power_down = dcn10_plane_atomic_power_down, 130 .enable_power_gating_plane = dcn20_enable_power_gating_plane, 131 .dpp_pg_control = dcn20_dpp_pg_control, 132 .hubp_pg_control = dcn20_hubp_pg_control, 133 .update_odm = dcn20_update_odm, 134 .dsc_pg_control = dcn20_dsc_pg_control, 135 .set_hdr_multiplier = dcn10_set_hdr_multiplier, 136 .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high, 137 .s0i3_golden_init_wa = dcn21_s0i3_golden_init_wa, 138 .wait_for_blank_complete = dcn20_wait_for_blank_complete, 139 .dccg_init = dcn20_dccg_init, 140 .set_blend_lut = dcn20_set_blend_lut, 141 .set_shaper_3dlut = dcn20_set_shaper_3dlut, 142 .PLAT_58856_wa = dcn21_PLAT_58856_wa, 143}; 144 145void dcn21_hw_sequencer_construct(struct dc *dc) 146{ 147 dc->hwss = dcn21_funcs; 148 dc->hwseq->funcs = dcn21_private_funcs; 149 150 if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { 151 dc->hwss.init_hw = dcn20_fpga_init_hw; 152 dc->hwseq->funcs.init_pipes = NULL; 153 } 154}