mi0283qt.c (7358B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * DRM driver for Multi-Inno MI0283QT panels 4 * 5 * Copyright 2016 Noralf Trønnes 6 */ 7 8#include <linux/backlight.h> 9#include <linux/delay.h> 10#include <linux/gpio/consumer.h> 11#include <linux/module.h> 12#include <linux/property.h> 13#include <linux/regulator/consumer.h> 14#include <linux/spi/spi.h> 15 16#include <drm/drm_atomic_helper.h> 17#include <drm/drm_drv.h> 18#include <drm/drm_fb_helper.h> 19#include <drm/drm_gem_atomic_helper.h> 20#include <drm/drm_gem_cma_helper.h> 21#include <drm/drm_managed.h> 22#include <drm/drm_mipi_dbi.h> 23#include <drm/drm_modeset_helper.h> 24#include <video/mipi_display.h> 25 26#define ILI9341_FRMCTR1 0xb1 27#define ILI9341_DISCTRL 0xb6 28#define ILI9341_ETMOD 0xb7 29 30#define ILI9341_PWCTRL1 0xc0 31#define ILI9341_PWCTRL2 0xc1 32#define ILI9341_VMCTRL1 0xc5 33#define ILI9341_VMCTRL2 0xc7 34#define ILI9341_PWCTRLA 0xcb 35#define ILI9341_PWCTRLB 0xcf 36 37#define ILI9341_PGAMCTRL 0xe0 38#define ILI9341_NGAMCTRL 0xe1 39#define ILI9341_DTCTRLA 0xe8 40#define ILI9341_DTCTRLB 0xea 41#define ILI9341_PWRSEQ 0xed 42 43#define ILI9341_EN3GAM 0xf2 44#define ILI9341_PUMPCTRL 0xf7 45 46#define ILI9341_MADCTL_BGR BIT(3) 47#define ILI9341_MADCTL_MV BIT(5) 48#define ILI9341_MADCTL_MX BIT(6) 49#define ILI9341_MADCTL_MY BIT(7) 50 51static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, 52 struct drm_crtc_state *crtc_state, 53 struct drm_plane_state *plane_state) 54{ 55 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 56 struct mipi_dbi *dbi = &dbidev->dbi; 57 u8 addr_mode; 58 int ret, idx; 59 60 if (!drm_dev_enter(pipe->crtc.dev, &idx)) 61 return; 62 63 DRM_DEBUG_KMS("\n"); 64 65 ret = mipi_dbi_poweron_conditional_reset(dbidev); 66 if (ret < 0) 67 goto out_exit; 68 if (ret == 1) 69 goto out_enable; 70 71 mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); 72 73 mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30); 74 mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); 75 mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79); 76 mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); 77 mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); 78 mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); 79 80 /* Power Control */ 81 mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26); 82 mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11); 83 /* VCOM */ 84 mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e); 85 mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe); 86 87 /* Memory Access Control */ 88 mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); 89 90 /* Frame Rate */ 91 mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); 92 93 /* Gamma */ 94 mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08); 95 mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); 96 mipi_dbi_command(dbi, ILI9341_PGAMCTRL, 97 0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87, 98 0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00); 99 mipi_dbi_command(dbi, ILI9341_NGAMCTRL, 100 0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78, 101 0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f); 102 103 /* DDRAM */ 104 mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); 105 106 /* Display */ 107 mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00); 108 mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); 109 msleep(100); 110 111 mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); 112 msleep(100); 113 114out_enable: 115 /* The PiTFT (ili9340) has a hardware reset circuit that 116 * resets only on power-on and not on each reboot through 117 * a gpio like the rpi-display does. 118 * As a result, we need to always apply the rotation value 119 * regardless of the display "on/off" state. 120 */ 121 switch (dbidev->rotation) { 122 default: 123 addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | 124 ILI9341_MADCTL_MX; 125 break; 126 case 90: 127 addr_mode = ILI9341_MADCTL_MY; 128 break; 129 case 180: 130 addr_mode = ILI9341_MADCTL_MV; 131 break; 132 case 270: 133 addr_mode = ILI9341_MADCTL_MX; 134 break; 135 } 136 addr_mode |= ILI9341_MADCTL_BGR; 137 mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); 138 mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); 139out_exit: 140 drm_dev_exit(idx); 141} 142 143static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = { 144 .enable = mi0283qt_enable, 145 .disable = mipi_dbi_pipe_disable, 146 .update = mipi_dbi_pipe_update, 147}; 148 149static const struct drm_display_mode mi0283qt_mode = { 150 DRM_SIMPLE_MODE(320, 240, 58, 43), 151}; 152 153DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops); 154 155static const struct drm_driver mi0283qt_driver = { 156 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, 157 .fops = &mi0283qt_fops, 158 DRM_GEM_CMA_DRIVER_OPS_VMAP, 159 .debugfs_init = mipi_dbi_debugfs_init, 160 .name = "mi0283qt", 161 .desc = "Multi-Inno MI0283QT", 162 .date = "20160614", 163 .major = 1, 164 .minor = 0, 165}; 166 167static const struct of_device_id mi0283qt_of_match[] = { 168 { .compatible = "multi-inno,mi0283qt" }, 169 {}, 170}; 171MODULE_DEVICE_TABLE(of, mi0283qt_of_match); 172 173static const struct spi_device_id mi0283qt_id[] = { 174 { "mi0283qt", 0 }, 175 { }, 176}; 177MODULE_DEVICE_TABLE(spi, mi0283qt_id); 178 179static int mi0283qt_probe(struct spi_device *spi) 180{ 181 struct device *dev = &spi->dev; 182 struct mipi_dbi_dev *dbidev; 183 struct drm_device *drm; 184 struct mipi_dbi *dbi; 185 struct gpio_desc *dc; 186 u32 rotation = 0; 187 int ret; 188 189 dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver, 190 struct mipi_dbi_dev, drm); 191 if (IS_ERR(dbidev)) 192 return PTR_ERR(dbidev); 193 194 dbi = &dbidev->dbi; 195 drm = &dbidev->drm; 196 197 dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 198 if (IS_ERR(dbi->reset)) 199 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); 200 201 dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); 202 if (IS_ERR(dc)) 203 return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n"); 204 205 dbidev->regulator = devm_regulator_get(dev, "power"); 206 if (IS_ERR(dbidev->regulator)) 207 return PTR_ERR(dbidev->regulator); 208 209 dbidev->backlight = devm_of_find_backlight(dev); 210 if (IS_ERR(dbidev->backlight)) 211 return PTR_ERR(dbidev->backlight); 212 213 device_property_read_u32(dev, "rotation", &rotation); 214 215 ret = mipi_dbi_spi_init(spi, dbi, dc); 216 if (ret) 217 return ret; 218 219 ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation); 220 if (ret) 221 return ret; 222 223 drm_mode_config_reset(drm); 224 225 ret = drm_dev_register(drm, 0); 226 if (ret) 227 return ret; 228 229 spi_set_drvdata(spi, drm); 230 231 drm_fbdev_generic_setup(drm, 0); 232 233 return 0; 234} 235 236static void mi0283qt_remove(struct spi_device *spi) 237{ 238 struct drm_device *drm = spi_get_drvdata(spi); 239 240 drm_dev_unplug(drm); 241 drm_atomic_helper_shutdown(drm); 242} 243 244static void mi0283qt_shutdown(struct spi_device *spi) 245{ 246 drm_atomic_helper_shutdown(spi_get_drvdata(spi)); 247} 248 249static int __maybe_unused mi0283qt_pm_suspend(struct device *dev) 250{ 251 return drm_mode_config_helper_suspend(dev_get_drvdata(dev)); 252} 253 254static int __maybe_unused mi0283qt_pm_resume(struct device *dev) 255{ 256 drm_mode_config_helper_resume(dev_get_drvdata(dev)); 257 258 return 0; 259} 260 261static const struct dev_pm_ops mi0283qt_pm_ops = { 262 SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume) 263}; 264 265static struct spi_driver mi0283qt_spi_driver = { 266 .driver = { 267 .name = "mi0283qt", 268 .owner = THIS_MODULE, 269 .of_match_table = mi0283qt_of_match, 270 .pm = &mi0283qt_pm_ops, 271 }, 272 .id_table = mi0283qt_id, 273 .probe = mi0283qt_probe, 274 .remove = mi0283qt_remove, 275 .shutdown = mi0283qt_shutdown, 276}; 277module_spi_driver(mi0283qt_spi_driver); 278 279MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver"); 280MODULE_AUTHOR("Noralf Trønnes"); 281MODULE_LICENSE("GPL");