cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

panel-mipi-dbi.c (10974B)


      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * DRM driver for MIPI DBI compatible display panels
      4 *
      5 * Copyright 2022 Noralf Trønnes
      6 */
      7
      8#include <linux/backlight.h>
      9#include <linux/delay.h>
     10#include <linux/firmware.h>
     11#include <linux/gpio/consumer.h>
     12#include <linux/module.h>
     13#include <linux/property.h>
     14#include <linux/regulator/consumer.h>
     15#include <linux/spi/spi.h>
     16
     17#include <drm/drm_atomic_helper.h>
     18#include <drm/drm_drv.h>
     19#include <drm/drm_fb_helper.h>
     20#include <drm/drm_gem_atomic_helper.h>
     21#include <drm/drm_gem_cma_helper.h>
     22#include <drm/drm_managed.h>
     23#include <drm/drm_mipi_dbi.h>
     24#include <drm/drm_modes.h>
     25#include <drm/drm_modeset_helper.h>
     26
     27#include <video/mipi_display.h>
     28
     29static const u8 panel_mipi_dbi_magic[15] = { 'M', 'I', 'P', 'I', ' ', 'D', 'B', 'I',
     30					     0, 0, 0, 0, 0, 0, 0 };
     31
     32/*
     33 * The display controller configuration is stored in a firmware file.
     34 * The Device Tree 'compatible' property value with a '.bin' suffix is passed
     35 * to request_firmware() to fetch this file.
     36 */
     37struct panel_mipi_dbi_config {
     38	/* Magic string: panel_mipi_dbi_magic */
     39	u8 magic[15];
     40
     41	/* Config file format version */
     42	u8 file_format_version;
     43
     44	/*
     45	 * MIPI commands to execute when the display pipeline is enabled.
     46	 * This is used to configure the display controller.
     47	 *
     48	 * The commands are stored in a byte array with the format:
     49	 *     command, num_parameters, [ parameter, ...], command, ...
     50	 *
     51	 * Some commands require a pause before the next command can be received.
     52	 * Inserting a delay in the command sequence is done by using the NOP command with one
     53	 * parameter: delay in miliseconds (the No Operation command is part of the MIPI Display
     54	 * Command Set where it has no parameters).
     55	 *
     56	 * Example:
     57	 *     command 0x11
     58	 *     sleep 120ms
     59	 *     command 0xb1 parameters 0x01, 0x2c, 0x2d
     60	 *     command 0x29
     61	 *
     62	 * Byte sequence:
     63	 *     0x11 0x00
     64	 *     0x00 0x01 0x78
     65	 *     0xb1 0x03 0x01 0x2c 0x2d
     66	 *     0x29 0x00
     67	 */
     68	u8 commands[];
     69};
     70
     71struct panel_mipi_dbi_commands {
     72	const u8 *buf;
     73	size_t len;
     74};
     75
     76static struct panel_mipi_dbi_commands *
     77panel_mipi_dbi_check_commands(struct device *dev, const struct firmware *fw)
     78{
     79	const struct panel_mipi_dbi_config *config = (struct panel_mipi_dbi_config *)fw->data;
     80	struct panel_mipi_dbi_commands *commands;
     81	size_t size = fw->size, commands_len;
     82	unsigned int i = 0;
     83
     84	if (size < sizeof(*config) + 2) { /* At least 1 command */
     85		dev_err(dev, "config: file size=%zu is too small\n", size);
     86		return ERR_PTR(-EINVAL);
     87	}
     88
     89	if (memcmp(config->magic, panel_mipi_dbi_magic, sizeof(config->magic))) {
     90		dev_err(dev, "config: Bad magic: %15ph\n", config->magic);
     91		return ERR_PTR(-EINVAL);
     92	}
     93
     94	if (config->file_format_version != 1) {
     95		dev_err(dev, "config: version=%u is not supported\n", config->file_format_version);
     96		return ERR_PTR(-EINVAL);
     97	}
     98
     99	drm_dev_dbg(dev, DRM_UT_DRIVER, "size=%zu version=%u\n", size, config->file_format_version);
    100
    101	commands_len = size - sizeof(*config);
    102
    103	while ((i + 1) < commands_len) {
    104		u8 command = config->commands[i++];
    105		u8 num_parameters = config->commands[i++];
    106		const u8 *parameters = &config->commands[i];
    107
    108		i += num_parameters;
    109		if (i > commands_len) {
    110			dev_err(dev, "config: command=0x%02x num_parameters=%u overflows\n",
    111				command, num_parameters);
    112			return ERR_PTR(-EINVAL);
    113		}
    114
    115		if (command == 0x00 && num_parameters == 1)
    116			drm_dev_dbg(dev, DRM_UT_DRIVER, "sleep %ums\n", parameters[0]);
    117		else
    118			drm_dev_dbg(dev, DRM_UT_DRIVER, "command %02x %*ph\n",
    119				    command, num_parameters, parameters);
    120	}
    121
    122	if (i != commands_len) {
    123		dev_err(dev, "config: malformed command array\n");
    124		return ERR_PTR(-EINVAL);
    125	}
    126
    127	commands = devm_kzalloc(dev, sizeof(*commands), GFP_KERNEL);
    128	if (!commands)
    129		return ERR_PTR(-ENOMEM);
    130
    131	commands->len = commands_len;
    132	commands->buf = devm_kmemdup(dev, config->commands, commands->len, GFP_KERNEL);
    133	if (!commands->buf)
    134		return ERR_PTR(-ENOMEM);
    135
    136	return commands;
    137}
    138
    139static struct panel_mipi_dbi_commands *panel_mipi_dbi_commands_from_fw(struct device *dev)
    140{
    141	struct panel_mipi_dbi_commands *commands;
    142	const struct firmware *fw;
    143	const char *compatible;
    144	char fw_name[40];
    145	int ret;
    146
    147	ret = of_property_read_string_index(dev->of_node, "compatible", 0, &compatible);
    148	if (ret)
    149		return ERR_PTR(ret);
    150
    151	snprintf(fw_name, sizeof(fw_name), "%s.bin", compatible);
    152	ret = request_firmware(&fw, fw_name, dev);
    153	if (ret) {
    154		dev_err(dev, "No config file found for compatible '%s' (error=%d)\n",
    155			compatible, ret);
    156
    157		return ERR_PTR(ret);
    158	}
    159
    160	commands = panel_mipi_dbi_check_commands(dev, fw);
    161	release_firmware(fw);
    162
    163	return commands;
    164}
    165
    166static void panel_mipi_dbi_commands_execute(struct mipi_dbi *dbi,
    167					    struct panel_mipi_dbi_commands *commands)
    168{
    169	unsigned int i = 0;
    170
    171	if (!commands)
    172		return;
    173
    174	while (i < commands->len) {
    175		u8 command = commands->buf[i++];
    176		u8 num_parameters = commands->buf[i++];
    177		const u8 *parameters = &commands->buf[i];
    178
    179		if (command == 0x00 && num_parameters == 1)
    180			msleep(parameters[0]);
    181		else if (num_parameters)
    182			mipi_dbi_command_stackbuf(dbi, command, parameters, num_parameters);
    183		else
    184			mipi_dbi_command(dbi, command);
    185
    186		i += num_parameters;
    187	}
    188}
    189
    190static void panel_mipi_dbi_enable(struct drm_simple_display_pipe *pipe,
    191				  struct drm_crtc_state *crtc_state,
    192				  struct drm_plane_state *plane_state)
    193{
    194	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
    195	struct mipi_dbi *dbi = &dbidev->dbi;
    196	int ret, idx;
    197
    198	if (!drm_dev_enter(pipe->crtc.dev, &idx))
    199		return;
    200
    201	drm_dbg(pipe->crtc.dev, "\n");
    202
    203	ret = mipi_dbi_poweron_conditional_reset(dbidev);
    204	if (ret < 0)
    205		goto out_exit;
    206	if (!ret)
    207		panel_mipi_dbi_commands_execute(dbi, dbidev->driver_private);
    208
    209	mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
    210out_exit:
    211	drm_dev_exit(idx);
    212}
    213
    214static const struct drm_simple_display_pipe_funcs panel_mipi_dbi_pipe_funcs = {
    215	.enable = panel_mipi_dbi_enable,
    216	.disable = mipi_dbi_pipe_disable,
    217	.update = mipi_dbi_pipe_update,
    218};
    219
    220DEFINE_DRM_GEM_CMA_FOPS(panel_mipi_dbi_fops);
    221
    222static const struct drm_driver panel_mipi_dbi_driver = {
    223	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
    224	.fops			= &panel_mipi_dbi_fops,
    225	DRM_GEM_CMA_DRIVER_OPS_VMAP,
    226	.debugfs_init		= mipi_dbi_debugfs_init,
    227	.name			= "panel-mipi-dbi",
    228	.desc			= "MIPI DBI compatible display panel",
    229	.date			= "20220103",
    230	.major			= 1,
    231	.minor			= 0,
    232};
    233
    234static int panel_mipi_dbi_get_mode(struct mipi_dbi_dev *dbidev, struct drm_display_mode *mode)
    235{
    236	struct device *dev = dbidev->drm.dev;
    237	u16 hback_porch, vback_porch;
    238	int ret;
    239
    240	ret = of_get_drm_panel_display_mode(dev->of_node, mode, NULL);
    241	if (ret) {
    242		dev_err(dev, "%pOF: failed to get panel-timing (error=%d)\n", dev->of_node, ret);
    243		return ret;
    244	}
    245
    246	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
    247
    248	hback_porch = mode->htotal - mode->hsync_end;
    249	vback_porch = mode->vtotal - mode->vsync_end;
    250
    251	/*
    252	 * Make sure width and height are set and that only back porch and
    253	 * pixelclock are set in the other timing values. Also check that
    254	 * width and height don't exceed the 16-bit value specified by MIPI DCS.
    255	 */
    256	if (!mode->hdisplay || !mode->vdisplay || mode->flags ||
    257	    mode->hsync_end > mode->hdisplay || (hback_porch + mode->hdisplay) > 0xffff ||
    258	    mode->vsync_end > mode->vdisplay || (vback_porch + mode->vdisplay) > 0xffff) {
    259		dev_err(dev, "%pOF: panel-timing out of bounds\n", dev->of_node);
    260		return -EINVAL;
    261	}
    262
    263	/* The driver doesn't use the pixel clock but it is mandatory so fake one if not set */
    264	if (!mode->clock)
    265		mode->clock = mode->htotal * mode->vtotal * 60 / 1000;
    266
    267	dbidev->top_offset = vback_porch;
    268	dbidev->left_offset = hback_porch;
    269
    270	return 0;
    271}
    272
    273static int panel_mipi_dbi_spi_probe(struct spi_device *spi)
    274{
    275	struct device *dev = &spi->dev;
    276	struct drm_display_mode mode;
    277	struct mipi_dbi_dev *dbidev;
    278	struct drm_device *drm;
    279	struct mipi_dbi *dbi;
    280	struct gpio_desc *dc;
    281	int ret;
    282
    283	dbidev = devm_drm_dev_alloc(dev, &panel_mipi_dbi_driver, struct mipi_dbi_dev, drm);
    284	if (IS_ERR(dbidev))
    285		return PTR_ERR(dbidev);
    286
    287	dbi = &dbidev->dbi;
    288	drm = &dbidev->drm;
    289
    290	ret = panel_mipi_dbi_get_mode(dbidev, &mode);
    291	if (ret)
    292		return ret;
    293
    294	dbidev->regulator = devm_regulator_get(dev, "power");
    295	if (IS_ERR(dbidev->regulator))
    296		return dev_err_probe(dev, PTR_ERR(dbidev->regulator),
    297				     "Failed to get regulator 'power'\n");
    298
    299	dbidev->backlight = devm_of_find_backlight(dev);
    300	if (IS_ERR(dbidev->backlight))
    301		return dev_err_probe(dev, PTR_ERR(dbidev->backlight), "Failed to get backlight\n");
    302
    303	dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
    304	if (IS_ERR(dbi->reset))
    305		return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
    306
    307	dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
    308	if (IS_ERR(dc))
    309		return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n");
    310
    311	ret = mipi_dbi_spi_init(spi, dbi, dc);
    312	if (ret)
    313		return ret;
    314
    315	if (device_property_present(dev, "write-only"))
    316		dbi->read_commands = NULL;
    317
    318	dbidev->driver_private = panel_mipi_dbi_commands_from_fw(dev);
    319	if (IS_ERR(dbidev->driver_private))
    320		return PTR_ERR(dbidev->driver_private);
    321
    322	ret = mipi_dbi_dev_init(dbidev, &panel_mipi_dbi_pipe_funcs, &mode, 0);
    323	if (ret)
    324		return ret;
    325
    326	drm_mode_config_reset(drm);
    327
    328	ret = drm_dev_register(drm, 0);
    329	if (ret)
    330		return ret;
    331
    332	spi_set_drvdata(spi, drm);
    333
    334	drm_fbdev_generic_setup(drm, 0);
    335
    336	return 0;
    337}
    338
    339static void panel_mipi_dbi_spi_remove(struct spi_device *spi)
    340{
    341	struct drm_device *drm = spi_get_drvdata(spi);
    342
    343	drm_dev_unplug(drm);
    344	drm_atomic_helper_shutdown(drm);
    345}
    346
    347static void panel_mipi_dbi_spi_shutdown(struct spi_device *spi)
    348{
    349	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
    350}
    351
    352static int __maybe_unused panel_mipi_dbi_pm_suspend(struct device *dev)
    353{
    354	return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
    355}
    356
    357static int __maybe_unused panel_mipi_dbi_pm_resume(struct device *dev)
    358{
    359	drm_mode_config_helper_resume(dev_get_drvdata(dev));
    360
    361	return 0;
    362}
    363
    364static const struct dev_pm_ops panel_mipi_dbi_pm_ops = {
    365	SET_SYSTEM_SLEEP_PM_OPS(panel_mipi_dbi_pm_suspend, panel_mipi_dbi_pm_resume)
    366};
    367
    368static const struct of_device_id panel_mipi_dbi_spi_of_match[] = {
    369	{ .compatible = "panel-mipi-dbi-spi" },
    370	{},
    371};
    372MODULE_DEVICE_TABLE(of, panel_mipi_dbi_spi_of_match);
    373
    374static const struct spi_device_id panel_mipi_dbi_spi_id[] = {
    375	{ "panel-mipi-dbi-spi", 0 },
    376	{ },
    377};
    378MODULE_DEVICE_TABLE(spi, panel_mipi_dbi_spi_id);
    379
    380static struct spi_driver panel_mipi_dbi_spi_driver = {
    381	.driver = {
    382		.name = "panel-mipi-dbi-spi",
    383		.owner = THIS_MODULE,
    384		.of_match_table = panel_mipi_dbi_spi_of_match,
    385		.pm = &panel_mipi_dbi_pm_ops,
    386	},
    387	.id_table = panel_mipi_dbi_spi_id,
    388	.probe = panel_mipi_dbi_spi_probe,
    389	.remove = panel_mipi_dbi_spi_remove,
    390	.shutdown = panel_mipi_dbi_spi_shutdown,
    391};
    392module_spi_driver(panel_mipi_dbi_spi_driver);
    393
    394MODULE_DESCRIPTION("MIPI DBI compatible display panel driver");
    395MODULE_AUTHOR("Noralf Trønnes");
    396MODULE_LICENSE("GPL");