lm25066.c (13997B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066 4 * 5 * Copyright (c) 2011 Ericsson AB. 6 * Copyright (c) 2013 Guenter Roeck 7 */ 8 9#include <linux/bitops.h> 10#include <linux/kernel.h> 11#include <linux/module.h> 12#include <linux/init.h> 13#include <linux/err.h> 14#include <linux/slab.h> 15#include <linux/i2c.h> 16#include <linux/log2.h> 17#include <linux/of_device.h> 18#include "pmbus.h" 19 20enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i }; 21 22#define LM25066_READ_VAUX 0xd0 23#define LM25066_MFR_READ_IIN 0xd1 24#define LM25066_MFR_READ_PIN 0xd2 25#define LM25066_MFR_IIN_OC_WARN_LIMIT 0xd3 26#define LM25066_MFR_PIN_OP_WARN_LIMIT 0xd4 27#define LM25066_READ_PIN_PEAK 0xd5 28#define LM25066_CLEAR_PIN_PEAK 0xd6 29#define LM25066_DEVICE_SETUP 0xd9 30#define LM25066_READ_AVG_VIN 0xdc 31#define LM25066_SAMPLES_FOR_AVG 0xdb 32#define LM25066_READ_AVG_VOUT 0xdd 33#define LM25066_READ_AVG_IIN 0xde 34#define LM25066_READ_AVG_PIN 0xdf 35 36#define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */ 37 38#define LM25066_SAMPLES_FOR_AVG_MAX 4096 39 40/* LM25056 only */ 41 42#define LM25056_VAUX_OV_WARN_LIMIT 0xe3 43#define LM25056_VAUX_UV_WARN_LIMIT 0xe4 44 45#define LM25056_MFR_STS_VAUX_OV_WARN BIT(1) 46#define LM25056_MFR_STS_VAUX_UV_WARN BIT(0) 47 48struct __coeff { 49 short m, b, R; 50}; 51 52#define PSC_CURRENT_IN_L (PSC_NUM_CLASSES) 53#define PSC_POWER_L (PSC_NUM_CLASSES + 1) 54 55static const struct __coeff lm25066_coeff[][PSC_NUM_CLASSES + 2] = { 56 [lm25056] = { 57 [PSC_VOLTAGE_IN] = { 58 .m = 16296, 59 .b = 1343, 60 .R = -2, 61 }, 62 [PSC_CURRENT_IN] = { 63 .m = 13797, 64 .b = -1833, 65 .R = -2, 66 }, 67 [PSC_CURRENT_IN_L] = { 68 .m = 6726, 69 .b = -537, 70 .R = -2, 71 }, 72 [PSC_POWER] = { 73 .m = 5501, 74 .b = -2908, 75 .R = -3, 76 }, 77 [PSC_POWER_L] = { 78 .m = 26882, 79 .b = -5646, 80 .R = -4, 81 }, 82 [PSC_TEMPERATURE] = { 83 .m = 1580, 84 .b = -14500, 85 .R = -2, 86 }, 87 }, 88 [lm25066] = { 89 [PSC_VOLTAGE_IN] = { 90 .m = 22070, 91 .b = -1800, 92 .R = -2, 93 }, 94 [PSC_VOLTAGE_OUT] = { 95 .m = 22070, 96 .b = -1800, 97 .R = -2, 98 }, 99 [PSC_CURRENT_IN] = { 100 .m = 13661, 101 .b = -5200, 102 .R = -2, 103 }, 104 [PSC_CURRENT_IN_L] = { 105 .m = 6854, 106 .b = -3100, 107 .R = -2, 108 }, 109 [PSC_POWER] = { 110 .m = 736, 111 .b = -3300, 112 .R = -2, 113 }, 114 [PSC_POWER_L] = { 115 .m = 369, 116 .b = -1900, 117 .R = -2, 118 }, 119 [PSC_TEMPERATURE] = { 120 .m = 16, 121 }, 122 }, 123 [lm5064] = { 124 [PSC_VOLTAGE_IN] = { 125 .m = 4611, 126 .b = -642, 127 .R = -2, 128 }, 129 [PSC_VOLTAGE_OUT] = { 130 .m = 4621, 131 .b = 423, 132 .R = -2, 133 }, 134 [PSC_CURRENT_IN] = { 135 .m = 10742, 136 .b = 1552, 137 .R = -2, 138 }, 139 [PSC_CURRENT_IN_L] = { 140 .m = 5456, 141 .b = 2118, 142 .R = -2, 143 }, 144 [PSC_POWER] = { 145 .m = 1204, 146 .b = 8524, 147 .R = -3, 148 }, 149 [PSC_POWER_L] = { 150 .m = 612, 151 .b = 11202, 152 .R = -3, 153 }, 154 [PSC_TEMPERATURE] = { 155 .m = 16, 156 }, 157 }, 158 [lm5066] = { 159 [PSC_VOLTAGE_IN] = { 160 .m = 4587, 161 .b = -1200, 162 .R = -2, 163 }, 164 [PSC_VOLTAGE_OUT] = { 165 .m = 4587, 166 .b = -2400, 167 .R = -2, 168 }, 169 [PSC_CURRENT_IN] = { 170 .m = 10753, 171 .b = -1200, 172 .R = -2, 173 }, 174 [PSC_CURRENT_IN_L] = { 175 .m = 5405, 176 .b = -600, 177 .R = -2, 178 }, 179 [PSC_POWER] = { 180 .m = 1204, 181 .b = -6000, 182 .R = -3, 183 }, 184 [PSC_POWER_L] = { 185 .m = 605, 186 .b = -8000, 187 .R = -3, 188 }, 189 [PSC_TEMPERATURE] = { 190 .m = 16, 191 }, 192 }, 193 [lm5066i] = { 194 [PSC_VOLTAGE_IN] = { 195 .m = 4617, 196 .b = -140, 197 .R = -2, 198 }, 199 [PSC_VOLTAGE_OUT] = { 200 .m = 4602, 201 .b = 500, 202 .R = -2, 203 }, 204 [PSC_CURRENT_IN] = { 205 .m = 15076, 206 .b = -504, 207 .R = -2, 208 }, 209 [PSC_CURRENT_IN_L] = { 210 .m = 7645, 211 .b = 100, 212 .R = -2, 213 }, 214 [PSC_POWER] = { 215 .m = 1701, 216 .b = -4000, 217 .R = -3, 218 }, 219 [PSC_POWER_L] = { 220 .m = 861, 221 .b = -965, 222 .R = -3, 223 }, 224 [PSC_TEMPERATURE] = { 225 .m = 16, 226 }, 227 }, 228}; 229 230struct lm25066_data { 231 int id; 232 u16 rlimit; /* Maximum register value */ 233 struct pmbus_driver_info info; 234}; 235 236#define to_lm25066_data(x) container_of(x, struct lm25066_data, info) 237 238static int lm25066_read_word_data(struct i2c_client *client, int page, 239 int phase, int reg) 240{ 241 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 242 const struct lm25066_data *data = to_lm25066_data(info); 243 int ret; 244 245 switch (reg) { 246 case PMBUS_VIRT_READ_VMON: 247 ret = pmbus_read_word_data(client, 0, 0xff, LM25066_READ_VAUX); 248 if (ret < 0) 249 break; 250 /* Adjust returned value to match VIN coefficients */ 251 switch (data->id) { 252 case lm25056: 253 /* VIN: 6.14 mV VAUX: 293 uV LSB */ 254 ret = DIV_ROUND_CLOSEST(ret * 293, 6140); 255 break; 256 case lm25066: 257 /* VIN: 4.54 mV VAUX: 283.2 uV LSB */ 258 ret = DIV_ROUND_CLOSEST(ret * 2832, 45400); 259 break; 260 case lm5064: 261 /* VIN: 4.53 mV VAUX: 700 uV LSB */ 262 ret = DIV_ROUND_CLOSEST(ret * 70, 453); 263 break; 264 case lm5066: 265 case lm5066i: 266 /* VIN: 2.18 mV VAUX: 725 uV LSB */ 267 ret = DIV_ROUND_CLOSEST(ret * 725, 2180); 268 break; 269 } 270 break; 271 case PMBUS_READ_IIN: 272 ret = pmbus_read_word_data(client, 0, 0xff, 273 LM25066_MFR_READ_IIN); 274 break; 275 case PMBUS_READ_PIN: 276 ret = pmbus_read_word_data(client, 0, 0xff, 277 LM25066_MFR_READ_PIN); 278 break; 279 case PMBUS_IIN_OC_WARN_LIMIT: 280 ret = pmbus_read_word_data(client, 0, 0xff, 281 LM25066_MFR_IIN_OC_WARN_LIMIT); 282 break; 283 case PMBUS_PIN_OP_WARN_LIMIT: 284 ret = pmbus_read_word_data(client, 0, 0xff, 285 LM25066_MFR_PIN_OP_WARN_LIMIT); 286 break; 287 case PMBUS_VIRT_READ_VIN_AVG: 288 ret = pmbus_read_word_data(client, 0, 0xff, 289 LM25066_READ_AVG_VIN); 290 break; 291 case PMBUS_VIRT_READ_VOUT_AVG: 292 ret = pmbus_read_word_data(client, 0, 0xff, 293 LM25066_READ_AVG_VOUT); 294 break; 295 case PMBUS_VIRT_READ_IIN_AVG: 296 ret = pmbus_read_word_data(client, 0, 0xff, 297 LM25066_READ_AVG_IIN); 298 break; 299 case PMBUS_VIRT_READ_PIN_AVG: 300 ret = pmbus_read_word_data(client, 0, 0xff, 301 LM25066_READ_AVG_PIN); 302 break; 303 case PMBUS_VIRT_READ_PIN_MAX: 304 ret = pmbus_read_word_data(client, 0, 0xff, 305 LM25066_READ_PIN_PEAK); 306 break; 307 case PMBUS_VIRT_RESET_PIN_HISTORY: 308 ret = 0; 309 break; 310 case PMBUS_VIRT_SAMPLES: 311 ret = pmbus_read_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG); 312 if (ret < 0) 313 break; 314 ret = 1 << ret; 315 break; 316 default: 317 ret = -ENODATA; 318 break; 319 } 320 return ret; 321} 322 323static int lm25056_read_word_data(struct i2c_client *client, int page, 324 int phase, int reg) 325{ 326 int ret; 327 328 switch (reg) { 329 case PMBUS_VIRT_VMON_UV_WARN_LIMIT: 330 ret = pmbus_read_word_data(client, 0, 0xff, 331 LM25056_VAUX_UV_WARN_LIMIT); 332 if (ret < 0) 333 break; 334 /* Adjust returned value to match VIN coefficients */ 335 ret = DIV_ROUND_CLOSEST(ret * 293, 6140); 336 break; 337 case PMBUS_VIRT_VMON_OV_WARN_LIMIT: 338 ret = pmbus_read_word_data(client, 0, 0xff, 339 LM25056_VAUX_OV_WARN_LIMIT); 340 if (ret < 0) 341 break; 342 /* Adjust returned value to match VIN coefficients */ 343 ret = DIV_ROUND_CLOSEST(ret * 293, 6140); 344 break; 345 default: 346 ret = lm25066_read_word_data(client, page, phase, reg); 347 break; 348 } 349 return ret; 350} 351 352static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg) 353{ 354 int ret, s; 355 356 switch (reg) { 357 case PMBUS_VIRT_STATUS_VMON: 358 ret = pmbus_read_byte_data(client, 0, 359 PMBUS_STATUS_MFR_SPECIFIC); 360 if (ret < 0) 361 break; 362 s = 0; 363 if (ret & LM25056_MFR_STS_VAUX_UV_WARN) 364 s |= PB_VOLTAGE_UV_WARNING; 365 if (ret & LM25056_MFR_STS_VAUX_OV_WARN) 366 s |= PB_VOLTAGE_OV_WARNING; 367 ret = s; 368 break; 369 default: 370 ret = -ENODATA; 371 break; 372 } 373 return ret; 374} 375 376static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, 377 u16 word) 378{ 379 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 380 const struct lm25066_data *data = to_lm25066_data(info); 381 int ret; 382 383 switch (reg) { 384 case PMBUS_POUT_OP_FAULT_LIMIT: 385 case PMBUS_POUT_OP_WARN_LIMIT: 386 case PMBUS_VOUT_UV_WARN_LIMIT: 387 case PMBUS_OT_FAULT_LIMIT: 388 case PMBUS_OT_WARN_LIMIT: 389 case PMBUS_IIN_OC_FAULT_LIMIT: 390 case PMBUS_VIN_UV_WARN_LIMIT: 391 case PMBUS_VIN_UV_FAULT_LIMIT: 392 case PMBUS_VIN_OV_FAULT_LIMIT: 393 case PMBUS_VIN_OV_WARN_LIMIT: 394 word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); 395 ret = pmbus_write_word_data(client, 0, reg, word); 396 break; 397 case PMBUS_IIN_OC_WARN_LIMIT: 398 word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); 399 ret = pmbus_write_word_data(client, 0, 400 LM25066_MFR_IIN_OC_WARN_LIMIT, 401 word); 402 break; 403 case PMBUS_PIN_OP_WARN_LIMIT: 404 word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); 405 ret = pmbus_write_word_data(client, 0, 406 LM25066_MFR_PIN_OP_WARN_LIMIT, 407 word); 408 break; 409 case PMBUS_VIRT_VMON_UV_WARN_LIMIT: 410 /* Adjust from VIN coefficients (for LM25056) */ 411 word = DIV_ROUND_CLOSEST((int)word * 6140, 293); 412 word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); 413 ret = pmbus_write_word_data(client, 0, 414 LM25056_VAUX_UV_WARN_LIMIT, word); 415 break; 416 case PMBUS_VIRT_VMON_OV_WARN_LIMIT: 417 /* Adjust from VIN coefficients (for LM25056) */ 418 word = DIV_ROUND_CLOSEST((int)word * 6140, 293); 419 word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit); 420 ret = pmbus_write_word_data(client, 0, 421 LM25056_VAUX_OV_WARN_LIMIT, word); 422 break; 423 case PMBUS_VIRT_RESET_PIN_HISTORY: 424 ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK); 425 break; 426 case PMBUS_VIRT_SAMPLES: 427 word = clamp_val(word, 1, LM25066_SAMPLES_FOR_AVG_MAX); 428 ret = pmbus_write_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG, 429 ilog2(word)); 430 break; 431 default: 432 ret = -ENODATA; 433 break; 434 } 435 return ret; 436} 437 438#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR) 439static const struct regulator_desc lm25066_reg_desc[] = { 440 PMBUS_REGULATOR("vout", 0), 441}; 442#endif 443 444static const struct i2c_device_id lm25066_id[] = { 445 {"lm25056", lm25056}, 446 {"lm25066", lm25066}, 447 {"lm5064", lm5064}, 448 {"lm5066", lm5066}, 449 {"lm5066i", lm5066i}, 450 { } 451}; 452MODULE_DEVICE_TABLE(i2c, lm25066_id); 453 454static const struct of_device_id __maybe_unused lm25066_of_match[] = { 455 { .compatible = "ti,lm25056", .data = (void *)lm25056, }, 456 { .compatible = "ti,lm25066", .data = (void *)lm25066, }, 457 { .compatible = "ti,lm5064", .data = (void *)lm5064, }, 458 { .compatible = "ti,lm5066", .data = (void *)lm5066, }, 459 { .compatible = "ti,lm5066i", .data = (void *)lm5066i, }, 460 { }, 461}; 462MODULE_DEVICE_TABLE(of, lm25066_of_match); 463 464static int lm25066_probe(struct i2c_client *client) 465{ 466 int config; 467 u32 shunt; 468 struct lm25066_data *data; 469 struct pmbus_driver_info *info; 470 const struct __coeff *coeff; 471 const struct of_device_id *of_id; 472 const struct i2c_device_id *i2c_id; 473 474 if (!i2c_check_functionality(client->adapter, 475 I2C_FUNC_SMBUS_READ_BYTE_DATA)) 476 return -ENODEV; 477 478 data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data), 479 GFP_KERNEL); 480 if (!data) 481 return -ENOMEM; 482 483 config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP); 484 if (config < 0) 485 return config; 486 487 i2c_id = i2c_match_id(lm25066_id, client); 488 489 of_id = of_match_device(lm25066_of_match, &client->dev); 490 if (of_id && (unsigned long)of_id->data != i2c_id->driver_data) 491 dev_notice(&client->dev, "Device mismatch: %s in device tree, %s detected\n", 492 of_id->name, i2c_id->name); 493 494 data->id = i2c_id->driver_data; 495 info = &data->info; 496 497 info->pages = 1; 498 info->format[PSC_VOLTAGE_IN] = direct; 499 info->format[PSC_VOLTAGE_OUT] = direct; 500 info->format[PSC_CURRENT_IN] = direct; 501 info->format[PSC_TEMPERATURE] = direct; 502 info->format[PSC_POWER] = direct; 503 504 info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON 505 | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT 506 | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_SAMPLES; 507 508 if (data->id == lm25056) { 509 info->func[0] |= PMBUS_HAVE_STATUS_VMON; 510 info->read_word_data = lm25056_read_word_data; 511 info->read_byte_data = lm25056_read_byte_data; 512 data->rlimit = 0x0fff; 513 } else { 514 info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; 515 info->read_word_data = lm25066_read_word_data; 516 data->rlimit = 0x0fff; 517 } 518 info->write_word_data = lm25066_write_word_data; 519 520 coeff = &lm25066_coeff[data->id][0]; 521 info->m[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].m; 522 info->b[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].b; 523 info->R[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].R; 524 info->m[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].m; 525 info->b[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].b; 526 info->R[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].R; 527 info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m; 528 info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b; 529 info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R; 530 info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R; 531 info->R[PSC_POWER] = coeff[PSC_POWER].R; 532 if (config & LM25066_DEV_SETUP_CL) { 533 info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m; 534 info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b; 535 info->m[PSC_POWER] = coeff[PSC_POWER_L].m; 536 info->b[PSC_POWER] = coeff[PSC_POWER_L].b; 537 } else { 538 info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m; 539 info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b; 540 info->m[PSC_POWER] = coeff[PSC_POWER].m; 541 info->b[PSC_POWER] = coeff[PSC_POWER].b; 542 } 543 544 /* 545 * Values in the TI datasheets are normalized for a 1mOhm sense 546 * resistor; assume that unless DT specifies a value explicitly. 547 */ 548 if (of_property_read_u32(client->dev.of_node, "shunt-resistor-micro-ohms", &shunt)) 549 shunt = 1000; 550 551 info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000; 552 info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000; 553 554#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR) 555 /* LM25056 doesn't support OPERATION */ 556 if (data->id != lm25056) { 557 info->num_regulators = ARRAY_SIZE(lm25066_reg_desc); 558 info->reg_desc = lm25066_reg_desc; 559 } 560#endif 561 562 return pmbus_do_probe(client, info); 563} 564 565/* This is the driver that will be inserted */ 566static struct i2c_driver lm25066_driver = { 567 .driver = { 568 .name = "lm25066", 569 .of_match_table = of_match_ptr(lm25066_of_match), 570 }, 571 .probe_new = lm25066_probe, 572 .id_table = lm25066_id, 573}; 574 575module_i2c_driver(lm25066_driver); 576 577MODULE_AUTHOR("Guenter Roeck"); 578MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips"); 579MODULE_LICENSE("GPL"); 580MODULE_IMPORT_NS(PMBUS);