cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

i2c-xgene-slimpro.c (16193B)


      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * X-Gene SLIMpro I2C Driver
      4 *
      5 * Copyright (c) 2014, Applied Micro Circuits Corporation
      6 * Author: Feng Kan <fkan@apm.com>
      7 * Author: Hieu Le <hnle@apm.com>
      8 *
      9 * This driver provides support for X-Gene SLIMpro I2C device access
     10 * using the APM X-Gene SLIMpro mailbox driver.
     11 */
     12#include <acpi/pcc.h>
     13#include <linux/acpi.h>
     14#include <linux/dma-mapping.h>
     15#include <linux/i2c.h>
     16#include <linux/interrupt.h>
     17#include <linux/io.h>
     18#include <linux/mailbox_client.h>
     19#include <linux/module.h>
     20#include <linux/of.h>
     21#include <linux/platform_device.h>
     22
     23#define MAILBOX_OP_TIMEOUT		1000	/* Operation time out in ms */
     24#define MAILBOX_I2C_INDEX		0
     25#define SLIMPRO_IIC_BUS			1	/* Use I2C bus 1 only */
     26
     27#define SMBUS_CMD_LEN			1
     28#define BYTE_DATA			1
     29#define WORD_DATA			2
     30#define BLOCK_DATA			3
     31
     32#define SLIMPRO_IIC_I2C_PROTOCOL	0
     33#define SLIMPRO_IIC_SMB_PROTOCOL	1
     34
     35#define SLIMPRO_IIC_READ		0
     36#define SLIMPRO_IIC_WRITE		1
     37
     38#define IIC_SMB_WITHOUT_DATA_LEN	0
     39#define IIC_SMB_WITH_DATA_LEN		1
     40
     41#define SLIMPRO_DEBUG_MSG		0
     42#define SLIMPRO_MSG_TYPE_SHIFT		28
     43#define SLIMPRO_DBG_SUBTYPE_I2C1READ	4
     44#define SLIMPRO_DBGMSG_TYPE_SHIFT	24
     45#define SLIMPRO_DBGMSG_TYPE_MASK	0x0F000000U
     46#define SLIMPRO_IIC_DEV_SHIFT		23
     47#define SLIMPRO_IIC_DEV_MASK		0x00800000U
     48#define SLIMPRO_IIC_DEVID_SHIFT		13
     49#define SLIMPRO_IIC_DEVID_MASK		0x007FE000U
     50#define SLIMPRO_IIC_RW_SHIFT		12
     51#define SLIMPRO_IIC_RW_MASK		0x00001000U
     52#define SLIMPRO_IIC_PROTO_SHIFT		11
     53#define SLIMPRO_IIC_PROTO_MASK		0x00000800U
     54#define SLIMPRO_IIC_ADDRLEN_SHIFT	8
     55#define SLIMPRO_IIC_ADDRLEN_MASK	0x00000700U
     56#define SLIMPRO_IIC_DATALEN_SHIFT	0
     57#define SLIMPRO_IIC_DATALEN_MASK	0x000000FFU
     58
     59/*
     60 * SLIMpro I2C message encode
     61 *
     62 * dev		- Controller number (0-based)
     63 * chip		- I2C chip address
     64 * op		- SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE
     65 * proto	- SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL
     66 * addrlen	- Length of the address field
     67 * datalen	- Length of the data field
     68 */
     69#define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \
     70	((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \
     71	((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \
     72	SLIMPRO_DBGMSG_TYPE_MASK) | \
     73	((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \
     74	((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \
     75	((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \
     76	((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \
     77	((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \
     78	((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK))
     79
     80#define SLIMPRO_MSG_TYPE(v)             (((v) & 0xF0000000) >> 28)
     81
     82/*
     83 * Encode for upper address for block data
     84 */
     85#define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR			0x80000000
     86#define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a)	((u32) (((a) << 30) \
     87								& 0x40000000))
     88#define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a)		((u32) (((a) >> 12) \
     89								& 0x3FF00000))
     90#define SLIMPRO_IIC_ENCODE_ADDR(a)			((a) & 0x000FFFFF)
     91
     92#define SLIMPRO_IIC_MSG_DWORD_COUNT			3
     93
     94/* PCC related defines */
     95#define PCC_SIGNATURE			0x50424300
     96#define PCC_STS_CMD_COMPLETE		BIT(0)
     97#define PCC_STS_SCI_DOORBELL		BIT(1)
     98#define PCC_STS_ERR			BIT(2)
     99#define PCC_STS_PLAT_NOTIFY		BIT(3)
    100#define PCC_CMD_GENERATE_DB_INT		BIT(15)
    101
    102struct slimpro_i2c_dev {
    103	struct i2c_adapter adapter;
    104	struct device *dev;
    105	struct mbox_chan *mbox_chan;
    106	struct pcc_mbox_chan *pcc_chan;
    107	struct mbox_client mbox_client;
    108	int mbox_idx;
    109	struct completion rd_complete;
    110	u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
    111	u32 *resp_msg;
    112	phys_addr_t comm_base_addr;
    113	void *pcc_comm_addr;
    114};
    115
    116#define to_slimpro_i2c_dev(cl)	\
    117		container_of(cl, struct slimpro_i2c_dev, mbox_client)
    118
    119enum slimpro_i2c_version {
    120	XGENE_SLIMPRO_I2C_V1 = 0,
    121	XGENE_SLIMPRO_I2C_V2 = 1,
    122};
    123
    124/*
    125 * This function tests and clears a bitmask then returns its old value
    126 */
    127static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask)
    128{
    129	u16 ret, val;
    130
    131	val = le16_to_cpu(READ_ONCE(*addr));
    132	ret = val & mask;
    133	val &= ~mask;
    134	WRITE_ONCE(*addr, cpu_to_le16(val));
    135
    136	return ret;
    137}
    138
    139static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
    140{
    141	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
    142
    143	/*
    144	 * Response message format:
    145	 * mssg[0] is the return code of the operation
    146	 * mssg[1] is the first data word
    147	 * mssg[2] is NOT used
    148	 */
    149	if (ctx->resp_msg)
    150		*ctx->resp_msg = ((u32 *)mssg)[1];
    151
    152	if (ctx->mbox_client.tx_block)
    153		complete(&ctx->rd_complete);
    154}
    155
    156static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg)
    157{
    158	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
    159	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
    160
    161	/* Check if platform sends interrupt */
    162	if (!xgene_word_tst_and_clr(&generic_comm_base->status,
    163				    PCC_STS_SCI_DOORBELL))
    164		return;
    165
    166	if (xgene_word_tst_and_clr(&generic_comm_base->status,
    167				   PCC_STS_CMD_COMPLETE)) {
    168		msg = generic_comm_base + 1;
    169
    170		/* Response message msg[1] contains the return value. */
    171		if (ctx->resp_msg)
    172			*ctx->resp_msg = ((u32 *)msg)[1];
    173
    174		complete(&ctx->rd_complete);
    175	}
    176}
    177
    178static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg)
    179{
    180	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
    181	u32 *ptr = (void *)(generic_comm_base + 1);
    182	u16 status;
    183	int i;
    184
    185	WRITE_ONCE(generic_comm_base->signature,
    186		   cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx));
    187
    188	WRITE_ONCE(generic_comm_base->command,
    189		   cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT));
    190
    191	status = le16_to_cpu(READ_ONCE(generic_comm_base->status));
    192	status &= ~PCC_STS_CMD_COMPLETE;
    193	WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status));
    194
    195	/* Copy the message to the PCC comm space */
    196	for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++)
    197		WRITE_ONCE(ptr[i], cpu_to_le32(msg[i]));
    198}
    199
    200static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
    201{
    202	if (ctx->mbox_client.tx_block || !acpi_disabled) {
    203		if (!wait_for_completion_timeout(&ctx->rd_complete,
    204						 msecs_to_jiffies(MAILBOX_OP_TIMEOUT)))
    205			return -ETIMEDOUT;
    206	}
    207
    208	/* Check of invalid data or no device */
    209	if (*ctx->resp_msg == 0xffffffff)
    210		return -ENODEV;
    211
    212	return 0;
    213}
    214
    215static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx,
    216				u32 *msg,
    217				u32 *data)
    218{
    219	int rc;
    220
    221	ctx->resp_msg = data;
    222
    223	if (!acpi_disabled) {
    224		reinit_completion(&ctx->rd_complete);
    225		slimpro_i2c_pcc_tx_prepare(ctx, msg);
    226	}
    227
    228	rc = mbox_send_message(ctx->mbox_chan, msg);
    229	if (rc < 0)
    230		goto err;
    231
    232	rc = start_i2c_msg_xfer(ctx);
    233
    234err:
    235	if (!acpi_disabled)
    236		mbox_chan_txdone(ctx->mbox_chan, 0);
    237
    238	ctx->resp_msg = NULL;
    239
    240	return rc;
    241}
    242
    243static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip,
    244			  u32 addr, u32 addrlen, u32 protocol,
    245			  u32 readlen, u32 *data)
    246{
    247	u32 msg[3];
    248
    249	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
    250					SLIMPRO_IIC_READ, protocol, addrlen, readlen);
    251	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
    252	msg[2] = 0;
    253
    254	return slimpro_i2c_send_msg(ctx, msg, data);
    255}
    256
    257static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip,
    258			  u32 addr, u32 addrlen, u32 protocol, u32 writelen,
    259			  u32 data)
    260{
    261	u32 msg[3];
    262
    263	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
    264					SLIMPRO_IIC_WRITE, protocol, addrlen, writelen);
    265	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
    266	msg[2] = data;
    267
    268	return slimpro_i2c_send_msg(ctx, msg, msg);
    269}
    270
    271static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
    272			     u32 addrlen, u32 protocol, u32 readlen,
    273			     u32 with_data_len, void *data)
    274{
    275	dma_addr_t paddr;
    276	u32 msg[3];
    277	int rc;
    278
    279	paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE);
    280	if (dma_mapping_error(ctx->dev, paddr)) {
    281		dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
    282			ctx->dma_buffer);
    283		return -ENOMEM;
    284	}
    285
    286	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ,
    287					protocol, addrlen, readlen);
    288	msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR |
    289		 SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) |
    290		 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
    291		 SLIMPRO_IIC_ENCODE_ADDR(addr);
    292	msg[2] = (u32)paddr;
    293
    294	rc = slimpro_i2c_send_msg(ctx, msg, msg);
    295
    296	/* Copy to destination */
    297	memcpy(data, ctx->dma_buffer, readlen);
    298
    299	dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE);
    300	return rc;
    301}
    302
    303static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
    304			     u32 addr, u32 addrlen, u32 protocol, u32 writelen,
    305			     void *data)
    306{
    307	dma_addr_t paddr;
    308	u32 msg[3];
    309	int rc;
    310
    311	memcpy(ctx->dma_buffer, data, writelen);
    312	paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen,
    313			       DMA_TO_DEVICE);
    314	if (dma_mapping_error(ctx->dev, paddr)) {
    315		dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
    316			ctx->dma_buffer);
    317		return -ENOMEM;
    318	}
    319
    320	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE,
    321					protocol, addrlen, writelen);
    322	msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR |
    323		 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
    324		 SLIMPRO_IIC_ENCODE_ADDR(addr);
    325	msg[2] = (u32)paddr;
    326
    327	if (ctx->mbox_client.tx_block)
    328		reinit_completion(&ctx->rd_complete);
    329
    330	rc = slimpro_i2c_send_msg(ctx, msg, msg);
    331
    332	dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE);
    333	return rc;
    334}
    335
    336static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr,
    337				  unsigned short flags, char read_write,
    338				  u8 command, int size,
    339				  union i2c_smbus_data *data)
    340{
    341	struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap);
    342	int ret = -EOPNOTSUPP;
    343	u32 val;
    344
    345	switch (size) {
    346	case I2C_SMBUS_BYTE:
    347		if (read_write == I2C_SMBUS_READ) {
    348			ret = slimpro_i2c_rd(ctx, addr, 0, 0,
    349					     SLIMPRO_IIC_SMB_PROTOCOL,
    350					     BYTE_DATA, &val);
    351			data->byte = val;
    352		} else {
    353			ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
    354					     SLIMPRO_IIC_SMB_PROTOCOL,
    355					     0, 0);
    356		}
    357		break;
    358	case I2C_SMBUS_BYTE_DATA:
    359		if (read_write == I2C_SMBUS_READ) {
    360			ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN,
    361					     SLIMPRO_IIC_SMB_PROTOCOL,
    362					     BYTE_DATA, &val);
    363			data->byte = val;
    364		} else {
    365			val = data->byte;
    366			ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
    367					     SLIMPRO_IIC_SMB_PROTOCOL,
    368					     BYTE_DATA, val);
    369		}
    370		break;
    371	case I2C_SMBUS_WORD_DATA:
    372		if (read_write == I2C_SMBUS_READ) {
    373			ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN,
    374					     SLIMPRO_IIC_SMB_PROTOCOL,
    375					     WORD_DATA, &val);
    376			data->word = val;
    377		} else {
    378			val = data->word;
    379			ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN,
    380					     SLIMPRO_IIC_SMB_PROTOCOL,
    381					     WORD_DATA, val);
    382		}
    383		break;
    384	case I2C_SMBUS_BLOCK_DATA:
    385		if (read_write == I2C_SMBUS_READ) {
    386			ret = slimpro_i2c_blkrd(ctx, addr, command,
    387						SMBUS_CMD_LEN,
    388						SLIMPRO_IIC_SMB_PROTOCOL,
    389						I2C_SMBUS_BLOCK_MAX + 1,
    390						IIC_SMB_WITH_DATA_LEN,
    391						&data->block[0]);
    392
    393		} else {
    394			ret = slimpro_i2c_blkwr(ctx, addr, command,
    395						SMBUS_CMD_LEN,
    396						SLIMPRO_IIC_SMB_PROTOCOL,
    397						data->block[0] + 1,
    398						&data->block[0]);
    399		}
    400		break;
    401	case I2C_SMBUS_I2C_BLOCK_DATA:
    402		if (read_write == I2C_SMBUS_READ) {
    403			ret = slimpro_i2c_blkrd(ctx, addr,
    404						command,
    405						SMBUS_CMD_LEN,
    406						SLIMPRO_IIC_I2C_PROTOCOL,
    407						I2C_SMBUS_BLOCK_MAX,
    408						IIC_SMB_WITHOUT_DATA_LEN,
    409						&data->block[1]);
    410		} else {
    411			ret = slimpro_i2c_blkwr(ctx, addr, command,
    412						SMBUS_CMD_LEN,
    413						SLIMPRO_IIC_I2C_PROTOCOL,
    414						data->block[0],
    415						&data->block[1]);
    416		}
    417		break;
    418	default:
    419		break;
    420	}
    421	return ret;
    422}
    423
    424/*
    425* Return list of supported functionality.
    426*/
    427static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter)
    428{
    429	return I2C_FUNC_SMBUS_BYTE |
    430		I2C_FUNC_SMBUS_BYTE_DATA |
    431		I2C_FUNC_SMBUS_WORD_DATA |
    432		I2C_FUNC_SMBUS_BLOCK_DATA |
    433		I2C_FUNC_SMBUS_I2C_BLOCK;
    434}
    435
    436static const struct i2c_algorithm xgene_slimpro_i2c_algorithm = {
    437	.smbus_xfer = xgene_slimpro_i2c_xfer,
    438	.functionality = xgene_slimpro_i2c_func,
    439};
    440
    441static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
    442{
    443	struct slimpro_i2c_dev *ctx;
    444	struct i2c_adapter *adapter;
    445	struct mbox_client *cl;
    446	int rc;
    447
    448	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
    449	if (!ctx)
    450		return -ENOMEM;
    451
    452	ctx->dev = &pdev->dev;
    453	platform_set_drvdata(pdev, ctx);
    454	cl = &ctx->mbox_client;
    455
    456	/* Request mailbox channel */
    457	cl->dev = &pdev->dev;
    458	init_completion(&ctx->rd_complete);
    459	cl->tx_tout = MAILBOX_OP_TIMEOUT;
    460	cl->knows_txdone = false;
    461	if (acpi_disabled) {
    462		cl->tx_block = true;
    463		cl->rx_callback = slimpro_i2c_rx_cb;
    464		ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
    465		if (IS_ERR(ctx->mbox_chan)) {
    466			dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
    467			return PTR_ERR(ctx->mbox_chan);
    468		}
    469	} else {
    470		struct pcc_mbox_chan *pcc_chan;
    471		const struct acpi_device_id *acpi_id;
    472		int version = XGENE_SLIMPRO_I2C_V1;
    473
    474		acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
    475					    &pdev->dev);
    476		if (!acpi_id)
    477			return -EINVAL;
    478
    479		version = (int)acpi_id->driver_data;
    480
    481		if (device_property_read_u32(&pdev->dev, "pcc-channel",
    482					     &ctx->mbox_idx))
    483			ctx->mbox_idx = MAILBOX_I2C_INDEX;
    484
    485		cl->tx_block = false;
    486		cl->rx_callback = slimpro_i2c_pcc_rx_cb;
    487		pcc_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx);
    488		if (IS_ERR(pcc_chan)) {
    489			dev_err(&pdev->dev, "PCC mailbox channel request failed\n");
    490			return PTR_ERR(pcc_chan);
    491		}
    492
    493		ctx->pcc_chan = pcc_chan;
    494		ctx->mbox_chan = pcc_chan->mchan;
    495
    496		if (!ctx->mbox_chan->mbox->txdone_irq) {
    497			dev_err(&pdev->dev, "PCC IRQ not supported\n");
    498			rc = -ENOENT;
    499			goto mbox_err;
    500		}
    501
    502		/*
    503		 * This is the shared communication region
    504		 * for the OS and Platform to communicate over.
    505		 */
    506		ctx->comm_base_addr = pcc_chan->shmem_base_addr;
    507		if (ctx->comm_base_addr) {
    508			if (version == XGENE_SLIMPRO_I2C_V2)
    509				ctx->pcc_comm_addr = memremap(
    510							ctx->comm_base_addr,
    511							pcc_chan->shmem_size,
    512							MEMREMAP_WT);
    513			else
    514				ctx->pcc_comm_addr = memremap(
    515							ctx->comm_base_addr,
    516							pcc_chan->shmem_size,
    517							MEMREMAP_WB);
    518		} else {
    519			dev_err(&pdev->dev, "Failed to get PCC comm region\n");
    520			rc = -ENOENT;
    521			goto mbox_err;
    522		}
    523
    524		if (!ctx->pcc_comm_addr) {
    525			dev_err(&pdev->dev,
    526				"Failed to ioremap PCC comm region\n");
    527			rc = -ENOMEM;
    528			goto mbox_err;
    529		}
    530	}
    531	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
    532	if (rc)
    533		dev_warn(&pdev->dev, "Unable to set dma mask\n");
    534
    535	/* Setup I2C adapter */
    536	adapter = &ctx->adapter;
    537	snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C");
    538	adapter->algo = &xgene_slimpro_i2c_algorithm;
    539	adapter->class = I2C_CLASS_HWMON;
    540	adapter->dev.parent = &pdev->dev;
    541	adapter->dev.of_node = pdev->dev.of_node;
    542	ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev));
    543	i2c_set_adapdata(adapter, ctx);
    544	rc = i2c_add_adapter(adapter);
    545	if (rc)
    546		goto mbox_err;
    547
    548	dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n");
    549	return 0;
    550
    551mbox_err:
    552	if (acpi_disabled)
    553		mbox_free_channel(ctx->mbox_chan);
    554	else
    555		pcc_mbox_free_channel(ctx->pcc_chan);
    556
    557	return rc;
    558}
    559
    560static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
    561{
    562	struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev);
    563
    564	i2c_del_adapter(&ctx->adapter);
    565
    566	if (acpi_disabled)
    567		mbox_free_channel(ctx->mbox_chan);
    568	else
    569		pcc_mbox_free_channel(ctx->pcc_chan);
    570
    571	return 0;
    572}
    573
    574static const struct of_device_id xgene_slimpro_i2c_dt_ids[] = {
    575	{.compatible = "apm,xgene-slimpro-i2c" },
    576	{},
    577};
    578MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
    579
    580#ifdef CONFIG_ACPI
    581static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
    582	{"APMC0D40", XGENE_SLIMPRO_I2C_V1},
    583	{"APMC0D8B", XGENE_SLIMPRO_I2C_V2},
    584	{}
    585};
    586MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);
    587#endif
    588
    589static struct platform_driver xgene_slimpro_i2c_driver = {
    590	.probe	= xgene_slimpro_i2c_probe,
    591	.remove	= xgene_slimpro_i2c_remove,
    592	.driver	= {
    593		.name	= "xgene-slimpro-i2c",
    594		.of_match_table = of_match_ptr(xgene_slimpro_i2c_dt_ids),
    595		.acpi_match_table = ACPI_PTR(xgene_slimpro_i2c_acpi_ids)
    596	},
    597};
    598
    599module_platform_driver(xgene_slimpro_i2c_driver);
    600
    601MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver");
    602MODULE_AUTHOR("Feng Kan <fkan@apm.com>");
    603MODULE_AUTHOR("Hieu Le <hnle@apm.com>");
    604MODULE_LICENSE("GPL");