max30102.c (16083B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor 4 * 5 * Copyright (C) 2017 Matt Ranostay <matt.ranostay@konsulko.com> 6 * 7 * Support for MAX30105 optical particle sensor 8 * Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net> 9 * 10 * 7-bit I2C chip address: 0x57 11 * TODO: proximity power saving feature 12 */ 13 14#include <linux/module.h> 15#include <linux/init.h> 16#include <linux/interrupt.h> 17#include <linux/delay.h> 18#include <linux/err.h> 19#include <linux/irq.h> 20#include <linux/i2c.h> 21#include <linux/mutex.h> 22#include <linux/mod_devicetable.h> 23#include <linux/regmap.h> 24#include <linux/iio/iio.h> 25#include <linux/iio/buffer.h> 26#include <linux/iio/kfifo_buf.h> 27 28#define MAX30102_REGMAP_NAME "max30102_regmap" 29#define MAX30102_DRV_NAME "max30102" 30#define MAX30102_PART_NUMBER 0x15 31 32enum max30102_chip_id { 33 max30102, 34 max30105, 35}; 36 37enum max3012_led_idx { 38 MAX30102_LED_RED, 39 MAX30102_LED_IR, 40 MAX30105_LED_GREEN, 41}; 42 43#define MAX30102_REG_INT_STATUS 0x00 44#define MAX30102_REG_INT_STATUS_PWR_RDY BIT(0) 45#define MAX30102_REG_INT_STATUS_PROX_INT BIT(4) 46#define MAX30102_REG_INT_STATUS_ALC_OVF BIT(5) 47#define MAX30102_REG_INT_STATUS_PPG_RDY BIT(6) 48#define MAX30102_REG_INT_STATUS_FIFO_RDY BIT(7) 49 50#define MAX30102_REG_INT_ENABLE 0x02 51#define MAX30102_REG_INT_ENABLE_PROX_INT_EN BIT(4) 52#define MAX30102_REG_INT_ENABLE_ALC_OVF_EN BIT(5) 53#define MAX30102_REG_INT_ENABLE_PPG_EN BIT(6) 54#define MAX30102_REG_INT_ENABLE_FIFO_EN BIT(7) 55#define MAX30102_REG_INT_ENABLE_MASK 0xf0 56#define MAX30102_REG_INT_ENABLE_MASK_SHIFT 4 57 58#define MAX30102_REG_FIFO_WR_PTR 0x04 59#define MAX30102_REG_FIFO_OVR_CTR 0x05 60#define MAX30102_REG_FIFO_RD_PTR 0x06 61#define MAX30102_REG_FIFO_DATA 0x07 62#define MAX30102_REG_FIFO_DATA_BYTES 3 63 64#define MAX30102_REG_FIFO_CONFIG 0x08 65#define MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES BIT(1) 66#define MAX30102_REG_FIFO_CONFIG_AVG_SHIFT 5 67#define MAX30102_REG_FIFO_CONFIG_AFULL BIT(0) 68 69#define MAX30102_REG_MODE_CONFIG 0x09 70#define MAX30102_REG_MODE_CONFIG_MODE_NONE 0x00 71#define MAX30102_REG_MODE_CONFIG_MODE_HR 0x02 /* red LED */ 72#define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2 0x03 /* red + IR LED */ 73#define MAX30102_REG_MODE_CONFIG_MODE_MULTI 0x07 /* multi-LED mode */ 74#define MAX30102_REG_MODE_CONFIG_MODE_MASK GENMASK(2, 0) 75#define MAX30102_REG_MODE_CONFIG_PWR BIT(7) 76 77#define MAX30102_REG_MODE_CONTROL_SLOT21 0x11 /* multi-LED control */ 78#define MAX30102_REG_MODE_CONTROL_SLOT43 0x12 79#define MAX30102_REG_MODE_CONTROL_SLOT_MASK (GENMASK(6, 4) | GENMASK(2, 0)) 80#define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT 4 81 82#define MAX30102_REG_SPO2_CONFIG 0x0a 83#define MAX30102_REG_SPO2_CONFIG_PULSE_411_US 0x03 84#define MAX30102_REG_SPO2_CONFIG_SR_400HZ 0x03 85#define MAX30102_REG_SPO2_CONFIG_SR_MASK 0x07 86#define MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT 2 87#define MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS BIT(0) 88#define MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT 5 89 90#define MAX30102_REG_RED_LED_CONFIG 0x0c 91#define MAX30102_REG_IR_LED_CONFIG 0x0d 92#define MAX30105_REG_GREEN_LED_CONFIG 0x0e 93 94#define MAX30102_REG_TEMP_CONFIG 0x21 95#define MAX30102_REG_TEMP_CONFIG_TEMP_EN BIT(0) 96 97#define MAX30102_REG_TEMP_INTEGER 0x1f 98#define MAX30102_REG_TEMP_FRACTION 0x20 99 100#define MAX30102_REG_REV_ID 0xfe 101#define MAX30102_REG_PART_ID 0xff 102 103struct max30102_data { 104 struct i2c_client *client; 105 struct iio_dev *indio_dev; 106 struct mutex lock; 107 struct regmap *regmap; 108 enum max30102_chip_id chip_id; 109 110 u8 buffer[12]; 111 __be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */ 112}; 113 114static const struct regmap_config max30102_regmap_config = { 115 .name = MAX30102_REGMAP_NAME, 116 117 .reg_bits = 8, 118 .val_bits = 8, 119}; 120 121static const unsigned long max30102_scan_masks[] = { 122 BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR), 123 0 124}; 125 126static const unsigned long max30105_scan_masks[] = { 127 BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR), 128 BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) | 129 BIT(MAX30105_LED_GREEN), 130 0 131}; 132 133#define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \ 134 .type = IIO_INTENSITY, \ 135 .channel2 = _mod, \ 136 .modified = 1, \ 137 .scan_index = _si, \ 138 .scan_type = { \ 139 .sign = 'u', \ 140 .shift = 8, \ 141 .realbits = 18, \ 142 .storagebits = 32, \ 143 .endianness = IIO_BE, \ 144 }, \ 145 } 146 147static const struct iio_chan_spec max30102_channels[] = { 148 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED), 149 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR), 150 { 151 .type = IIO_TEMP, 152 .info_mask_separate = 153 BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), 154 .scan_index = -1, 155 }, 156}; 157 158static const struct iio_chan_spec max30105_channels[] = { 159 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED), 160 MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR), 161 MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN), 162 { 163 .type = IIO_TEMP, 164 .info_mask_separate = 165 BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), 166 .scan_index = -1, 167 }, 168}; 169 170static int max30102_set_power(struct max30102_data *data, bool en) 171{ 172 return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG, 173 MAX30102_REG_MODE_CONFIG_PWR, 174 en ? 0 : MAX30102_REG_MODE_CONFIG_PWR); 175} 176 177static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en) 178{ 179 u8 reg = mode; 180 181 if (!en) 182 reg |= MAX30102_REG_MODE_CONFIG_PWR; 183 184 return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG, 185 MAX30102_REG_MODE_CONFIG_PWR | 186 MAX30102_REG_MODE_CONFIG_MODE_MASK, reg); 187} 188 189#define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \ 190 ((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1) 191 192static int max30102_buffer_postenable(struct iio_dev *indio_dev) 193{ 194 struct max30102_data *data = iio_priv(indio_dev); 195 int ret; 196 u8 reg; 197 198 switch (*indio_dev->active_scan_mask) { 199 case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR): 200 reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2; 201 break; 202 case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) | 203 BIT(MAX30105_LED_GREEN): 204 ret = regmap_update_bits(data->regmap, 205 MAX30102_REG_MODE_CONTROL_SLOT21, 206 MAX30102_REG_MODE_CONTROL_SLOT_MASK, 207 MAX30102_MODE_CONTROL_LED_SLOTS(2, 1)); 208 if (ret) 209 return ret; 210 211 ret = regmap_update_bits(data->regmap, 212 MAX30102_REG_MODE_CONTROL_SLOT43, 213 MAX30102_REG_MODE_CONTROL_SLOT_MASK, 214 MAX30102_MODE_CONTROL_LED_SLOTS(0, 3)); 215 if (ret) 216 return ret; 217 218 reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI; 219 break; 220 default: 221 return -EINVAL; 222 } 223 224 return max30102_set_powermode(data, reg, true); 225} 226 227static int max30102_buffer_predisable(struct iio_dev *indio_dev) 228{ 229 struct max30102_data *data = iio_priv(indio_dev); 230 231 return max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE, 232 false); 233} 234 235static const struct iio_buffer_setup_ops max30102_buffer_setup_ops = { 236 .postenable = max30102_buffer_postenable, 237 .predisable = max30102_buffer_predisable, 238}; 239 240static inline int max30102_fifo_count(struct max30102_data *data) 241{ 242 unsigned int val; 243 int ret; 244 245 ret = regmap_read(data->regmap, MAX30102_REG_INT_STATUS, &val); 246 if (ret) 247 return ret; 248 249 /* FIFO has one sample slot left */ 250 if (val & MAX30102_REG_INT_STATUS_FIFO_RDY) 251 return 1; 252 253 return 0; 254} 255 256#define MAX30102_COPY_DATA(i) \ 257 memcpy(&data->processed_buffer[(i)], \ 258 &buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \ 259 MAX30102_REG_FIFO_DATA_BYTES) 260 261static int max30102_read_measurement(struct max30102_data *data, 262 unsigned int measurements) 263{ 264 int ret; 265 u8 *buffer = (u8 *) &data->buffer; 266 267 ret = i2c_smbus_read_i2c_block_data(data->client, 268 MAX30102_REG_FIFO_DATA, 269 measurements * 270 MAX30102_REG_FIFO_DATA_BYTES, 271 buffer); 272 273 switch (measurements) { 274 case 3: 275 MAX30102_COPY_DATA(2); 276 fallthrough; 277 case 2: 278 MAX30102_COPY_DATA(1); 279 fallthrough; 280 case 1: 281 MAX30102_COPY_DATA(0); 282 break; 283 default: 284 return -EINVAL; 285 } 286 287 return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ? 288 0 : -EINVAL; 289} 290 291static irqreturn_t max30102_interrupt_handler(int irq, void *private) 292{ 293 struct iio_dev *indio_dev = private; 294 struct max30102_data *data = iio_priv(indio_dev); 295 unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask, 296 indio_dev->masklength); 297 int ret, cnt = 0; 298 299 mutex_lock(&data->lock); 300 301 while (cnt || (cnt = max30102_fifo_count(data)) > 0) { 302 ret = max30102_read_measurement(data, measurements); 303 if (ret) 304 break; 305 306 iio_push_to_buffers(data->indio_dev, data->processed_buffer); 307 cnt--; 308 } 309 310 mutex_unlock(&data->lock); 311 312 return IRQ_HANDLED; 313} 314 315static int max30102_get_current_idx(unsigned int val, int *reg) 316{ 317 /* each step is 0.200 mA */ 318 *reg = val / 200; 319 320 return *reg > 0xff ? -EINVAL : 0; 321} 322 323static int max30102_led_init(struct max30102_data *data) 324{ 325 struct device *dev = &data->client->dev; 326 unsigned int val; 327 int reg, ret; 328 329 ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val); 330 if (ret) { 331 dev_info(dev, "no red-led-current-microamp set\n"); 332 333 /* Default to 7 mA RED LED */ 334 val = 7000; 335 } 336 337 ret = max30102_get_current_idx(val, ®); 338 if (ret) { 339 dev_err(dev, "invalid RED LED current setting %d\n", val); 340 return ret; 341 } 342 343 ret = regmap_write(data->regmap, MAX30102_REG_RED_LED_CONFIG, reg); 344 if (ret) 345 return ret; 346 347 if (data->chip_id == max30105) { 348 ret = device_property_read_u32(dev, 349 "maxim,green-led-current-microamp", &val); 350 if (ret) { 351 dev_info(dev, "no green-led-current-microamp set\n"); 352 353 /* Default to 7 mA green LED */ 354 val = 7000; 355 } 356 357 ret = max30102_get_current_idx(val, ®); 358 if (ret) { 359 dev_err(dev, "invalid green LED current setting %d\n", 360 val); 361 return ret; 362 } 363 364 ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG, 365 reg); 366 if (ret) 367 return ret; 368 } 369 370 ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val); 371 if (ret) { 372 dev_info(dev, "no ir-led-current-microamp set\n"); 373 374 /* Default to 7 mA IR LED */ 375 val = 7000; 376 } 377 378 ret = max30102_get_current_idx(val, ®); 379 if (ret) { 380 dev_err(dev, "invalid IR LED current setting %d\n", val); 381 return ret; 382 } 383 384 return regmap_write(data->regmap, MAX30102_REG_IR_LED_CONFIG, reg); 385} 386 387static int max30102_chip_init(struct max30102_data *data) 388{ 389 int ret; 390 391 /* setup LED current settings */ 392 ret = max30102_led_init(data); 393 if (ret) 394 return ret; 395 396 /* configure 18-bit HR + SpO2 readings at 400Hz */ 397 ret = regmap_write(data->regmap, MAX30102_REG_SPO2_CONFIG, 398 (MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS 399 << MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT) | 400 (MAX30102_REG_SPO2_CONFIG_SR_400HZ 401 << MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT) | 402 MAX30102_REG_SPO2_CONFIG_PULSE_411_US); 403 if (ret) 404 return ret; 405 406 /* average 4 samples + generate FIFO interrupt */ 407 ret = regmap_write(data->regmap, MAX30102_REG_FIFO_CONFIG, 408 (MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES 409 << MAX30102_REG_FIFO_CONFIG_AVG_SHIFT) | 410 MAX30102_REG_FIFO_CONFIG_AFULL); 411 if (ret) 412 return ret; 413 414 /* enable FIFO interrupt */ 415 return regmap_update_bits(data->regmap, MAX30102_REG_INT_ENABLE, 416 MAX30102_REG_INT_ENABLE_MASK, 417 MAX30102_REG_INT_ENABLE_FIFO_EN); 418} 419 420static int max30102_read_temp(struct max30102_data *data, int *val) 421{ 422 int ret; 423 unsigned int reg; 424 425 ret = regmap_read(data->regmap, MAX30102_REG_TEMP_INTEGER, ®); 426 if (ret < 0) 427 return ret; 428 *val = reg << 4; 429 430 ret = regmap_read(data->regmap, MAX30102_REG_TEMP_FRACTION, ®); 431 if (ret < 0) 432 return ret; 433 434 *val |= reg & 0xf; 435 *val = sign_extend32(*val, 11); 436 437 return 0; 438} 439 440static int max30102_get_temp(struct max30102_data *data, int *val, bool en) 441{ 442 int ret; 443 444 if (en) { 445 ret = max30102_set_power(data, true); 446 if (ret) 447 return ret; 448 } 449 450 /* start acquisition */ 451 ret = regmap_update_bits(data->regmap, MAX30102_REG_TEMP_CONFIG, 452 MAX30102_REG_TEMP_CONFIG_TEMP_EN, 453 MAX30102_REG_TEMP_CONFIG_TEMP_EN); 454 if (ret) 455 goto out; 456 457 msleep(35); 458 ret = max30102_read_temp(data, val); 459 460out: 461 if (en) 462 max30102_set_power(data, false); 463 464 return ret; 465} 466 467static int max30102_read_raw(struct iio_dev *indio_dev, 468 struct iio_chan_spec const *chan, 469 int *val, int *val2, long mask) 470{ 471 struct max30102_data *data = iio_priv(indio_dev); 472 int ret = -EINVAL; 473 474 switch (mask) { 475 case IIO_CHAN_INFO_RAW: 476 /* 477 * Temperature reading can only be acquired when not in 478 * shutdown; leave shutdown briefly when buffer not running 479 */ 480 mutex_lock(&indio_dev->mlock); 481 if (!iio_buffer_enabled(indio_dev)) 482 ret = max30102_get_temp(data, val, true); 483 else 484 ret = max30102_get_temp(data, val, false); 485 mutex_unlock(&indio_dev->mlock); 486 if (ret) 487 return ret; 488 489 ret = IIO_VAL_INT; 490 break; 491 case IIO_CHAN_INFO_SCALE: 492 *val = 1000; /* 62.5 */ 493 *val2 = 16; 494 ret = IIO_VAL_FRACTIONAL; 495 break; 496 } 497 498 return ret; 499} 500 501static const struct iio_info max30102_info = { 502 .read_raw = max30102_read_raw, 503}; 504 505static int max30102_probe(struct i2c_client *client, 506 const struct i2c_device_id *id) 507{ 508 struct max30102_data *data; 509 struct iio_dev *indio_dev; 510 int ret; 511 unsigned int reg; 512 513 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); 514 if (!indio_dev) 515 return -ENOMEM; 516 517 indio_dev->name = MAX30102_DRV_NAME; 518 indio_dev->info = &max30102_info; 519 indio_dev->modes = INDIO_DIRECT_MODE; 520 521 data = iio_priv(indio_dev); 522 data->indio_dev = indio_dev; 523 data->client = client; 524 data->chip_id = id->driver_data; 525 526 mutex_init(&data->lock); 527 i2c_set_clientdata(client, indio_dev); 528 529 switch (data->chip_id) { 530 case max30105: 531 indio_dev->channels = max30105_channels; 532 indio_dev->num_channels = ARRAY_SIZE(max30105_channels); 533 indio_dev->available_scan_masks = max30105_scan_masks; 534 break; 535 case max30102: 536 indio_dev->channels = max30102_channels; 537 indio_dev->num_channels = ARRAY_SIZE(max30102_channels); 538 indio_dev->available_scan_masks = max30102_scan_masks; 539 break; 540 default: 541 return -ENODEV; 542 } 543 544 ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev, 545 &max30102_buffer_setup_ops); 546 if (ret) 547 return ret; 548 549 data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config); 550 if (IS_ERR(data->regmap)) { 551 dev_err(&client->dev, "regmap initialization failed\n"); 552 return PTR_ERR(data->regmap); 553 } 554 555 /* check part ID */ 556 ret = regmap_read(data->regmap, MAX30102_REG_PART_ID, ®); 557 if (ret) 558 return ret; 559 if (reg != MAX30102_PART_NUMBER) 560 return -ENODEV; 561 562 /* show revision ID */ 563 ret = regmap_read(data->regmap, MAX30102_REG_REV_ID, ®); 564 if (ret) 565 return ret; 566 dev_dbg(&client->dev, "max3010x revision %02x\n", reg); 567 568 /* clear mode setting, chip shutdown */ 569 ret = max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE, 570 false); 571 if (ret) 572 return ret; 573 574 ret = max30102_chip_init(data); 575 if (ret) 576 return ret; 577 578 if (client->irq <= 0) { 579 dev_err(&client->dev, "no valid irq defined\n"); 580 return -EINVAL; 581 } 582 583 ret = devm_request_threaded_irq(&client->dev, client->irq, 584 NULL, max30102_interrupt_handler, 585 IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 586 "max30102_irq", indio_dev); 587 if (ret) { 588 dev_err(&client->dev, "request irq (%d) failed\n", client->irq); 589 return ret; 590 } 591 592 return iio_device_register(indio_dev); 593} 594 595static int max30102_remove(struct i2c_client *client) 596{ 597 struct iio_dev *indio_dev = i2c_get_clientdata(client); 598 struct max30102_data *data = iio_priv(indio_dev); 599 600 iio_device_unregister(indio_dev); 601 max30102_set_power(data, false); 602 603 return 0; 604} 605 606static const struct i2c_device_id max30102_id[] = { 607 { "max30102", max30102 }, 608 { "max30105", max30105 }, 609 {} 610}; 611MODULE_DEVICE_TABLE(i2c, max30102_id); 612 613static const struct of_device_id max30102_dt_ids[] = { 614 { .compatible = "maxim,max30102" }, 615 { .compatible = "maxim,max30105" }, 616 { } 617}; 618MODULE_DEVICE_TABLE(of, max30102_dt_ids); 619 620static struct i2c_driver max30102_driver = { 621 .driver = { 622 .name = MAX30102_DRV_NAME, 623 .of_match_table = max30102_dt_ids, 624 }, 625 .probe = max30102_probe, 626 .remove = max30102_remove, 627 .id_table = max30102_id, 628}; 629module_i2c_driver(max30102_driver); 630 631MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); 632MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver"); 633MODULE_LICENSE("GPL");