st_lsm6dsx_shub.c (22028B)
1/* 2 * STMicroelectronics st_lsm6dsx i2c controller driver 3 * 4 * i2c controller embedded in lsm6dx series can connect up to four 5 * slave devices using accelerometer sensor as trigger for i2c 6 * read/write operations. Current implementation relies on SLV0 channel 7 * for slave configuration and SLV{1,2,3} to read data and push them into 8 * the hw FIFO 9 * 10 * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> 11 * 12 * Permission to use, copy, modify, and/or distribute this software for any 13 * purpose with or without fee is hereby granted, provided that the above 14 * copyright notice and this permission notice appear in all copies. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 17 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 18 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 19 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 20 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 21 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 22 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 23 * 24 */ 25#include <linux/module.h> 26#include <linux/regmap.h> 27#include <linux/iio/iio.h> 28#include <linux/iio/sysfs.h> 29#include <linux/bitfield.h> 30 31#include "st_lsm6dsx.h" 32 33#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3) 34#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3) 35#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3) 36 37#define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0) 38 39static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = { 40 /* LIS2MDL */ 41 { 42 .i2c_addr = { 0x1e }, 43 .wai = { 44 .addr = 0x4f, 45 .val = 0x40, 46 }, 47 .id = ST_LSM6DSX_ID_MAGN, 48 .odr_table = { 49 .reg = { 50 .addr = 0x60, 51 .mask = GENMASK(3, 2), 52 }, 53 .odr_avl[0] = { 10000, 0x0 }, 54 .odr_avl[1] = { 20000, 0x1 }, 55 .odr_avl[2] = { 50000, 0x2 }, 56 .odr_avl[3] = { 100000, 0x3 }, 57 .odr_len = 4, 58 }, 59 .fs_table = { 60 .fs_avl[0] = { 61 .gain = 1500, 62 .val = 0x0, 63 }, /* 1500 uG/LSB */ 64 .fs_len = 1, 65 }, 66 .temp_comp = { 67 .addr = 0x60, 68 .mask = BIT(7), 69 }, 70 .pwr_table = { 71 .reg = { 72 .addr = 0x60, 73 .mask = GENMASK(1, 0), 74 }, 75 .off_val = 0x2, 76 .on_val = 0x0, 77 }, 78 .off_canc = { 79 .addr = 0x61, 80 .mask = BIT(1), 81 }, 82 .bdu = { 83 .addr = 0x62, 84 .mask = BIT(4), 85 }, 86 .out = { 87 .addr = 0x68, 88 .len = 6, 89 }, 90 }, 91 /* LIS3MDL */ 92 { 93 .i2c_addr = { 0x1e }, 94 .wai = { 95 .addr = 0x0f, 96 .val = 0x3d, 97 }, 98 .id = ST_LSM6DSX_ID_MAGN, 99 .odr_table = { 100 .reg = { 101 .addr = 0x20, 102 .mask = GENMASK(4, 2), 103 }, 104 .odr_avl[0] = { 1000, 0x0 }, 105 .odr_avl[1] = { 2000, 0x1 }, 106 .odr_avl[2] = { 3000, 0x2 }, 107 .odr_avl[3] = { 5000, 0x3 }, 108 .odr_avl[4] = { 10000, 0x4 }, 109 .odr_avl[5] = { 20000, 0x5 }, 110 .odr_avl[6] = { 40000, 0x6 }, 111 .odr_avl[7] = { 80000, 0x7 }, 112 .odr_len = 8, 113 }, 114 .fs_table = { 115 .reg = { 116 .addr = 0x21, 117 .mask = GENMASK(6, 5), 118 }, 119 .fs_avl[0] = { 120 .gain = 146, 121 .val = 0x00, 122 }, /* 4000 uG/LSB */ 123 .fs_avl[1] = { 124 .gain = 292, 125 .val = 0x01, 126 }, /* 8000 uG/LSB */ 127 .fs_avl[2] = { 128 .gain = 438, 129 .val = 0x02, 130 }, /* 12000 uG/LSB */ 131 .fs_avl[3] = { 132 .gain = 584, 133 .val = 0x03, 134 }, /* 16000 uG/LSB */ 135 .fs_len = 4, 136 }, 137 .pwr_table = { 138 .reg = { 139 .addr = 0x22, 140 .mask = GENMASK(1, 0), 141 }, 142 .off_val = 0x2, 143 .on_val = 0x0, 144 }, 145 .bdu = { 146 .addr = 0x24, 147 .mask = BIT(6), 148 }, 149 .out = { 150 .addr = 0x28, 151 .len = 6, 152 }, 153 }, 154}; 155 156static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) 157{ 158 struct st_lsm6dsx_sensor *sensor; 159 u32 odr, timeout; 160 161 sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); 162 odr = (hw->enable_mask & BIT(ST_LSM6DSX_ID_ACC)) ? sensor->odr : 12500; 163 /* set 10ms as minimum timeout for i2c slave configuration */ 164 timeout = max_t(u32, 2000000U / odr + 1, 10); 165 msleep(timeout); 166} 167 168/* 169 * st_lsm6dsx_shub_read_output - read i2c controller register 170 * 171 * Read st_lsm6dsx i2c controller register 172 */ 173static int 174st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data, 175 int len) 176{ 177 const struct st_lsm6dsx_shub_settings *hub_settings; 178 int err; 179 180 mutex_lock(&hw->page_lock); 181 182 hub_settings = &hw->settings->shub_settings; 183 if (hub_settings->shub_out.sec_page) { 184 err = st_lsm6dsx_set_page(hw, true); 185 if (err < 0) 186 goto out; 187 } 188 189 err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr, 190 data, len); 191 192 if (hub_settings->shub_out.sec_page) 193 st_lsm6dsx_set_page(hw, false); 194out: 195 mutex_unlock(&hw->page_lock); 196 197 return err; 198} 199 200/* 201 * st_lsm6dsx_shub_write_reg - write i2c controller register 202 * 203 * Write st_lsm6dsx i2c controller register 204 */ 205static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr, 206 u8 *data, int len) 207{ 208 int err; 209 210 mutex_lock(&hw->page_lock); 211 err = st_lsm6dsx_set_page(hw, true); 212 if (err < 0) 213 goto out; 214 215 err = regmap_bulk_write(hw->regmap, addr, data, len); 216 217 st_lsm6dsx_set_page(hw, false); 218out: 219 mutex_unlock(&hw->page_lock); 220 221 return err; 222} 223 224static int 225st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, 226 u8 mask, u8 val) 227{ 228 int err; 229 230 mutex_lock(&hw->page_lock); 231 err = st_lsm6dsx_set_page(hw, true); 232 if (err < 0) 233 goto out; 234 235 err = regmap_update_bits(hw->regmap, addr, mask, val); 236 237 st_lsm6dsx_set_page(hw, false); 238out: 239 mutex_unlock(&hw->page_lock); 240 241 return err; 242} 243 244static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, 245 bool enable) 246{ 247 const struct st_lsm6dsx_shub_settings *hub_settings; 248 struct st_lsm6dsx_hw *hw = sensor->hw; 249 unsigned int data; 250 int err; 251 252 /* enable acc sensor as trigger */ 253 err = st_lsm6dsx_sensor_set_enable(sensor, enable); 254 if (err < 0) 255 return err; 256 257 mutex_lock(&hw->page_lock); 258 259 hub_settings = &hw->settings->shub_settings; 260 if (hub_settings->master_en.sec_page) { 261 err = st_lsm6dsx_set_page(hw, true); 262 if (err < 0) 263 goto out; 264 } 265 266 data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask); 267 err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr, 268 hub_settings->master_en.mask, data); 269 270 if (hub_settings->master_en.sec_page) 271 st_lsm6dsx_set_page(hw, false); 272out: 273 mutex_unlock(&hw->page_lock); 274 275 return err; 276} 277 278/* 279 * st_lsm6dsx_shub_read - read data from slave device register 280 * 281 * Read data from slave device register. SLV0 is used for 282 * one-shot read operation 283 */ 284static int 285st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, 286 u8 *data, int len) 287{ 288 const struct st_lsm6dsx_shub_settings *hub_settings; 289 u8 config[3], slv_addr, slv_config = 0; 290 struct st_lsm6dsx_hw *hw = sensor->hw; 291 const struct st_lsm6dsx_reg *aux_sens; 292 int err; 293 294 hub_settings = &hw->settings->shub_settings; 295 slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); 296 aux_sens = &hw->settings->shub_settings.aux_sens; 297 /* do not overwrite aux_sens */ 298 if (slv_addr + 2 == aux_sens->addr) 299 slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask); 300 301 config[0] = (sensor->ext_info.addr << 1) | 1; 302 config[1] = addr; 303 config[2] = (len & ST_LS6DSX_READ_OP_MASK) | slv_config; 304 305 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 306 sizeof(config)); 307 if (err < 0) 308 return err; 309 310 err = st_lsm6dsx_shub_master_enable(sensor, true); 311 if (err < 0) 312 return err; 313 314 st_lsm6dsx_shub_wait_complete(hw); 315 316 err = st_lsm6dsx_shub_read_output(hw, data, 317 len & ST_LS6DSX_READ_OP_MASK); 318 if (err < 0) 319 return err; 320 321 st_lsm6dsx_shub_master_enable(sensor, false); 322 323 config[0] = hub_settings->pause; 324 config[1] = 0; 325 config[2] = slv_config; 326 return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 327 sizeof(config)); 328} 329 330/* 331 * st_lsm6dsx_shub_write - write data to slave device register 332 * 333 * Write data from slave device register. SLV0 is used for 334 * one-shot write operation 335 */ 336static int 337st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr, 338 u8 *data, int len) 339{ 340 const struct st_lsm6dsx_shub_settings *hub_settings; 341 struct st_lsm6dsx_hw *hw = sensor->hw; 342 u8 config[2], slv_addr; 343 int err, i; 344 345 hub_settings = &hw->settings->shub_settings; 346 if (hub_settings->wr_once.addr) { 347 unsigned int data; 348 349 data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask); 350 err = st_lsm6dsx_shub_write_reg_with_mask(hw, 351 hub_settings->wr_once.addr, 352 hub_settings->wr_once.mask, 353 data); 354 if (err < 0) 355 return err; 356 } 357 358 slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); 359 config[0] = sensor->ext_info.addr << 1; 360 for (i = 0 ; i < len; i++) { 361 config[1] = addr + i; 362 363 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 364 sizeof(config)); 365 if (err < 0) 366 return err; 367 368 err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr, 369 &data[i], 1); 370 if (err < 0) 371 return err; 372 373 err = st_lsm6dsx_shub_master_enable(sensor, true); 374 if (err < 0) 375 return err; 376 377 st_lsm6dsx_shub_wait_complete(hw); 378 379 st_lsm6dsx_shub_master_enable(sensor, false); 380 } 381 382 config[0] = hub_settings->pause; 383 config[1] = 0; 384 return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config)); 385} 386 387static int 388st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor, 389 u8 addr, u8 mask, u8 val) 390{ 391 int err; 392 u8 data; 393 394 err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data)); 395 if (err < 0) 396 return err; 397 398 data = ((data & ~mask) | (val << __ffs(mask) & mask)); 399 400 return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data)); 401} 402 403static int 404st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor, 405 u32 odr, u16 *val) 406{ 407 const struct st_lsm6dsx_ext_dev_settings *settings; 408 int i; 409 410 settings = sensor->ext_info.settings; 411 for (i = 0; i < settings->odr_table.odr_len; i++) { 412 if (settings->odr_table.odr_avl[i].milli_hz == odr) 413 break; 414 } 415 416 if (i == settings->odr_table.odr_len) 417 return -EINVAL; 418 419 *val = settings->odr_table.odr_avl[i].val; 420 return 0; 421} 422 423static int 424st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u32 odr) 425{ 426 const struct st_lsm6dsx_ext_dev_settings *settings; 427 u16 val; 428 int err; 429 430 err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val); 431 if (err < 0) 432 return err; 433 434 settings = sensor->ext_info.settings; 435 return st_lsm6dsx_shub_write_with_mask(sensor, 436 settings->odr_table.reg.addr, 437 settings->odr_table.reg.mask, 438 val); 439} 440 441/* use SLV{1,2,3} for FIFO read operations */ 442static int 443st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor, 444 bool enable) 445{ 446 const struct st_lsm6dsx_shub_settings *hub_settings; 447 const struct st_lsm6dsx_ext_dev_settings *settings; 448 u8 config[9] = {}, enable_mask, slv_addr; 449 struct st_lsm6dsx_hw *hw = sensor->hw; 450 struct st_lsm6dsx_sensor *cur_sensor; 451 int i, j = 0; 452 453 hub_settings = &hw->settings->shub_settings; 454 if (enable) 455 enable_mask = hw->enable_mask | BIT(sensor->id); 456 else 457 enable_mask = hw->enable_mask & ~BIT(sensor->id); 458 459 for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) { 460 if (!hw->iio_devs[i]) 461 continue; 462 463 cur_sensor = iio_priv(hw->iio_devs[i]); 464 if (!(enable_mask & BIT(cur_sensor->id))) 465 continue; 466 467 settings = cur_sensor->ext_info.settings; 468 config[j] = (sensor->ext_info.addr << 1) | 1; 469 config[j + 1] = settings->out.addr; 470 config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) | 471 hub_settings->batch_en; 472 j += 3; 473 } 474 475 slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr); 476 return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 477 sizeof(config)); 478} 479 480int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable) 481{ 482 const struct st_lsm6dsx_ext_dev_settings *settings; 483 int err; 484 485 err = st_lsm6dsx_shub_config_channels(sensor, enable); 486 if (err < 0) 487 return err; 488 489 settings = sensor->ext_info.settings; 490 if (enable) { 491 err = st_lsm6dsx_shub_set_odr(sensor, 492 sensor->ext_info.slv_odr); 493 if (err < 0) 494 return err; 495 } else { 496 err = st_lsm6dsx_shub_write_with_mask(sensor, 497 settings->odr_table.reg.addr, 498 settings->odr_table.reg.mask, 0); 499 if (err < 0) 500 return err; 501 } 502 503 if (settings->pwr_table.reg.addr) { 504 u8 val; 505 506 val = enable ? settings->pwr_table.on_val 507 : settings->pwr_table.off_val; 508 err = st_lsm6dsx_shub_write_with_mask(sensor, 509 settings->pwr_table.reg.addr, 510 settings->pwr_table.reg.mask, val); 511 if (err < 0) 512 return err; 513 } 514 515 return st_lsm6dsx_shub_master_enable(sensor, enable); 516} 517 518static int 519st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, 520 struct iio_chan_spec const *ch, 521 int *val) 522{ 523 int err, delay, len; 524 u8 data[4]; 525 526 err = st_lsm6dsx_shub_set_enable(sensor, true); 527 if (err < 0) 528 return err; 529 530 delay = 1000000000 / sensor->ext_info.slv_odr; 531 usleep_range(delay, 2 * delay); 532 533 len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3); 534 err = st_lsm6dsx_shub_read(sensor, ch->address, data, len); 535 if (err < 0) 536 return err; 537 538 err = st_lsm6dsx_shub_set_enable(sensor, false); 539 if (err < 0) 540 return err; 541 542 switch (len) { 543 case 2: 544 *val = (s16)le16_to_cpu(*((__le16 *)data)); 545 break; 546 default: 547 return -EINVAL; 548 } 549 550 return IIO_VAL_INT; 551} 552 553static int 554st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev, 555 struct iio_chan_spec const *ch, 556 int *val, int *val2, long mask) 557{ 558 struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); 559 int ret; 560 561 switch (mask) { 562 case IIO_CHAN_INFO_RAW: 563 ret = iio_device_claim_direct_mode(iio_dev); 564 if (ret) 565 break; 566 567 ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val); 568 iio_device_release_direct_mode(iio_dev); 569 break; 570 case IIO_CHAN_INFO_SAMP_FREQ: 571 *val = sensor->ext_info.slv_odr / 1000; 572 *val2 = (sensor->ext_info.slv_odr % 1000) * 1000; 573 ret = IIO_VAL_INT_PLUS_MICRO; 574 break; 575 case IIO_CHAN_INFO_SCALE: 576 *val = 0; 577 *val2 = sensor->gain; 578 ret = IIO_VAL_INT_PLUS_MICRO; 579 break; 580 default: 581 ret = -EINVAL; 582 break; 583 } 584 585 return ret; 586} 587 588static int 589st_lsm6dsx_shub_set_full_scale(struct st_lsm6dsx_sensor *sensor, 590 u32 gain) 591{ 592 const struct st_lsm6dsx_fs_table_entry *fs_table; 593 int i, err; 594 595 fs_table = &sensor->ext_info.settings->fs_table; 596 if (!fs_table->reg.addr) 597 return -ENOTSUPP; 598 599 for (i = 0; i < fs_table->fs_len; i++) { 600 if (fs_table->fs_avl[i].gain == gain) 601 break; 602 } 603 604 if (i == fs_table->fs_len) 605 return -EINVAL; 606 607 err = st_lsm6dsx_shub_write_with_mask(sensor, fs_table->reg.addr, 608 fs_table->reg.mask, 609 fs_table->fs_avl[i].val); 610 if (err < 0) 611 return err; 612 613 sensor->gain = gain; 614 615 return 0; 616} 617 618static int 619st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev, 620 struct iio_chan_spec const *chan, 621 int val, int val2, long mask) 622{ 623 struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); 624 int err; 625 626 err = iio_device_claim_direct_mode(iio_dev); 627 if (err) 628 return err; 629 630 switch (mask) { 631 case IIO_CHAN_INFO_SAMP_FREQ: { 632 u16 data; 633 634 val = val * 1000 + val2 / 1000; 635 err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data); 636 if (!err) { 637 struct st_lsm6dsx_hw *hw = sensor->hw; 638 struct st_lsm6dsx_sensor *ref_sensor; 639 u8 odr_val; 640 int odr; 641 642 ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); 643 odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val); 644 if (odr < 0) { 645 err = odr; 646 goto release; 647 } 648 649 sensor->ext_info.slv_odr = val; 650 sensor->odr = odr; 651 } 652 break; 653 } 654 case IIO_CHAN_INFO_SCALE: 655 err = st_lsm6dsx_shub_set_full_scale(sensor, val2); 656 break; 657 default: 658 err = -EINVAL; 659 break; 660 } 661 662release: 663 iio_device_release_direct_mode(iio_dev); 664 665 return err; 666} 667 668static ssize_t 669st_lsm6dsx_shub_sampling_freq_avail(struct device *dev, 670 struct device_attribute *attr, 671 char *buf) 672{ 673 struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); 674 const struct st_lsm6dsx_ext_dev_settings *settings; 675 int i, len = 0; 676 677 settings = sensor->ext_info.settings; 678 for (i = 0; i < settings->odr_table.odr_len; i++) { 679 u32 val = settings->odr_table.odr_avl[i].milli_hz; 680 681 len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%03d ", 682 val / 1000, val % 1000); 683 } 684 buf[len - 1] = '\n'; 685 686 return len; 687} 688 689static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev, 690 struct device_attribute *attr, 691 char *buf) 692{ 693 struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); 694 const struct st_lsm6dsx_ext_dev_settings *settings; 695 int i, len = 0; 696 697 settings = sensor->ext_info.settings; 698 for (i = 0; i < settings->fs_table.fs_len; i++) 699 len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", 700 settings->fs_table.fs_avl[i].gain); 701 buf[len - 1] = '\n'; 702 703 return len; 704} 705 706static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail); 707static IIO_DEVICE_ATTR(in_scale_available, 0444, 708 st_lsm6dsx_shub_scale_avail, NULL, 0); 709static struct attribute *st_lsm6dsx_ext_attributes[] = { 710 &iio_dev_attr_sampling_frequency_available.dev_attr.attr, 711 &iio_dev_attr_in_scale_available.dev_attr.attr, 712 NULL, 713}; 714 715static const struct attribute_group st_lsm6dsx_ext_attribute_group = { 716 .attrs = st_lsm6dsx_ext_attributes, 717}; 718 719static const struct iio_info st_lsm6dsx_ext_info = { 720 .attrs = &st_lsm6dsx_ext_attribute_group, 721 .read_raw = st_lsm6dsx_shub_read_raw, 722 .write_raw = st_lsm6dsx_shub_write_raw, 723 .hwfifo_set_watermark = st_lsm6dsx_set_watermark, 724}; 725 726static struct iio_dev * 727st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw, 728 enum st_lsm6dsx_sensor_id id, 729 const struct st_lsm6dsx_ext_dev_settings *info, 730 u8 i2c_addr, const char *name) 731{ 732 enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC; 733 struct iio_chan_spec *ext_channels; 734 struct st_lsm6dsx_sensor *sensor; 735 struct iio_dev *iio_dev; 736 737 iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); 738 if (!iio_dev) 739 return NULL; 740 741 iio_dev->modes = INDIO_DIRECT_MODE; 742 iio_dev->info = &st_lsm6dsx_ext_info; 743 744 sensor = iio_priv(iio_dev); 745 sensor->id = id; 746 sensor->hw = hw; 747 sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz; 748 sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz; 749 sensor->gain = info->fs_table.fs_avl[0].gain; 750 sensor->ext_info.settings = info; 751 sensor->ext_info.addr = i2c_addr; 752 sensor->watermark = 1; 753 754 switch (info->id) { 755 case ST_LSM6DSX_ID_MAGN: { 756 const struct iio_chan_spec magn_channels[] = { 757 ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr, 758 IIO_MOD_X, 0), 759 ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2, 760 IIO_MOD_Y, 1), 761 ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4, 762 IIO_MOD_Z, 2), 763 IIO_CHAN_SOFT_TIMESTAMP(3), 764 }; 765 766 ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels), 767 GFP_KERNEL); 768 if (!ext_channels) 769 return NULL; 770 771 memcpy(ext_channels, magn_channels, sizeof(magn_channels)); 772 iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; 773 iio_dev->channels = ext_channels; 774 iio_dev->num_channels = ARRAY_SIZE(magn_channels); 775 776 scnprintf(sensor->name, sizeof(sensor->name), "%s_magn", 777 name); 778 break; 779 } 780 default: 781 return NULL; 782 } 783 iio_dev->name = sensor->name; 784 785 return iio_dev; 786} 787 788static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor) 789{ 790 const struct st_lsm6dsx_ext_dev_settings *settings; 791 int err; 792 793 settings = sensor->ext_info.settings; 794 if (settings->bdu.addr) { 795 err = st_lsm6dsx_shub_write_with_mask(sensor, 796 settings->bdu.addr, 797 settings->bdu.mask, 1); 798 if (err < 0) 799 return err; 800 } 801 802 if (settings->temp_comp.addr) { 803 err = st_lsm6dsx_shub_write_with_mask(sensor, 804 settings->temp_comp.addr, 805 settings->temp_comp.mask, 1); 806 if (err < 0) 807 return err; 808 } 809 810 if (settings->off_canc.addr) { 811 err = st_lsm6dsx_shub_write_with_mask(sensor, 812 settings->off_canc.addr, 813 settings->off_canc.mask, 1); 814 if (err < 0) 815 return err; 816 } 817 818 return 0; 819} 820 821static int 822st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, 823 const struct st_lsm6dsx_ext_dev_settings *settings) 824{ 825 const struct st_lsm6dsx_shub_settings *hub_settings; 826 u8 config[3], data, slv_addr, slv_config = 0; 827 const struct st_lsm6dsx_reg *aux_sens; 828 struct st_lsm6dsx_sensor *sensor; 829 bool found = false; 830 int i, err; 831 832 sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); 833 hub_settings = &hw->settings->shub_settings; 834 aux_sens = &hw->settings->shub_settings.aux_sens; 835 slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); 836 /* do not overwrite aux_sens */ 837 if (slv_addr + 2 == aux_sens->addr) 838 slv_config = ST_LSM6DSX_SHIFT_VAL(3, aux_sens->mask); 839 840 for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) { 841 if (!settings->i2c_addr[i]) 842 continue; 843 844 /* read wai slave register */ 845 config[0] = (settings->i2c_addr[i] << 1) | 0x1; 846 config[1] = settings->wai.addr; 847 config[2] = 0x1 | slv_config; 848 849 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 850 sizeof(config)); 851 if (err < 0) 852 return err; 853 854 err = st_lsm6dsx_shub_master_enable(sensor, true); 855 if (err < 0) 856 return err; 857 858 st_lsm6dsx_shub_wait_complete(hw); 859 860 err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data)); 861 862 st_lsm6dsx_shub_master_enable(sensor, false); 863 864 if (err < 0) 865 return err; 866 867 if (data != settings->wai.val) 868 continue; 869 870 *i2c_addr = settings->i2c_addr[i]; 871 found = true; 872 break; 873 } 874 875 /* reset SLV0 channel */ 876 config[0] = hub_settings->pause; 877 config[1] = 0; 878 config[2] = slv_config; 879 err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, 880 sizeof(config)); 881 if (err < 0) 882 return err; 883 884 return found ? 0 : -ENODEV; 885} 886 887int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name) 888{ 889 enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0; 890 struct st_lsm6dsx_sensor *sensor; 891 int err, i, num_ext_dev = 0; 892 u8 i2c_addr = 0; 893 894 for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) { 895 err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr, 896 &st_lsm6dsx_ext_dev_table[i]); 897 if (err == -ENODEV) 898 continue; 899 else if (err < 0) 900 return err; 901 902 hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id, 903 &st_lsm6dsx_ext_dev_table[i], 904 i2c_addr, name); 905 if (!hw->iio_devs[id]) 906 return -ENOMEM; 907 908 sensor = iio_priv(hw->iio_devs[id]); 909 err = st_lsm6dsx_shub_init_device(sensor); 910 if (err < 0) 911 return err; 912 913 if (++num_ext_dev >= hw->settings->shub_settings.num_ext_dev) 914 break; 915 id++; 916 } 917 918 return 0; 919}