cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

mb1232.c (6556B)


      1// SPDX-License-Identifier: GPL-2.0+
      2/*
      3 * mb1232.c - Support for MaxBotix I2CXL-MaxSonar-EZ series ultrasonic
      4 *   ranger with i2c interface
      5 * actually tested with mb1232 type
      6 *
      7 * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
      8 *
      9 * For details about the device see:
     10 * https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf
     11 */
     12
     13#include <linux/bitops.h>
     14#include <linux/err.h>
     15#include <linux/i2c.h>
     16#include <linux/delay.h>
     17#include <linux/mod_devicetable.h>
     18#include <linux/module.h>
     19#include <linux/property.h>
     20
     21#include <linux/iio/iio.h>
     22#include <linux/iio/sysfs.h>
     23#include <linux/iio/buffer.h>
     24#include <linux/iio/trigger_consumer.h>
     25#include <linux/iio/triggered_buffer.h>
     26
     27/* registers of MaxSonar device */
     28#define MB1232_RANGE_COMMAND	0x51	/* Command for reading range */
     29#define MB1232_ADDR_UNLOCK_1	0xAA	/* Command 1 for changing address */
     30#define MB1232_ADDR_UNLOCK_2	0xA5	/* Command 2 for changing address */
     31
     32struct mb1232_data {
     33	struct i2c_client	*client;
     34
     35	struct mutex		lock;
     36
     37	/*
     38	 * optionally a gpio can be used to announce when ranging has
     39	 * finished
     40	 * since we are just using the falling trigger of it we request
     41	 * only the interrupt for announcing when data is ready to be read
     42	 */
     43	struct completion	ranging;
     44	int			irqnr;
     45	/* Ensure correct alignment of data to push to IIO buffer */
     46	struct {
     47		s16 distance;
     48		s64 ts __aligned(8);
     49	} scan;
     50};
     51
     52static irqreturn_t mb1232_handle_irq(int irq, void *dev_id)
     53{
     54	struct iio_dev *indio_dev = dev_id;
     55	struct mb1232_data *data = iio_priv(indio_dev);
     56
     57	complete(&data->ranging);
     58
     59	return IRQ_HANDLED;
     60}
     61
     62static s16 mb1232_read_distance(struct mb1232_data *data)
     63{
     64	struct i2c_client *client = data->client;
     65	int ret;
     66	s16 distance;
     67	__be16 buf;
     68
     69	mutex_lock(&data->lock);
     70
     71	reinit_completion(&data->ranging);
     72
     73	ret = i2c_smbus_write_byte(client, MB1232_RANGE_COMMAND);
     74	if (ret < 0) {
     75		dev_err(&client->dev, "write command - err: %d\n", ret);
     76		goto error_unlock;
     77	}
     78
     79	if (data->irqnr >= 0) {
     80		/* it cannot take more than 100 ms */
     81		ret = wait_for_completion_killable_timeout(&data->ranging,
     82									HZ/10);
     83		if (ret < 0)
     84			goto error_unlock;
     85		else if (ret == 0) {
     86			ret = -ETIMEDOUT;
     87			goto error_unlock;
     88		}
     89	} else {
     90		/* use simple sleep if announce irq is not connected */
     91		msleep(15);
     92	}
     93
     94	ret = i2c_master_recv(client, (char *)&buf, sizeof(buf));
     95	if (ret < 0) {
     96		dev_err(&client->dev, "i2c_master_recv: ret=%d\n", ret);
     97		goto error_unlock;
     98	}
     99
    100	distance = __be16_to_cpu(buf);
    101	/* check for not returning misleading error codes */
    102	if (distance < 0) {
    103		dev_err(&client->dev, "distance=%d\n", distance);
    104		ret = -EINVAL;
    105		goto error_unlock;
    106	}
    107
    108	mutex_unlock(&data->lock);
    109
    110	return distance;
    111
    112error_unlock:
    113	mutex_unlock(&data->lock);
    114
    115	return ret;
    116}
    117
    118static irqreturn_t mb1232_trigger_handler(int irq, void *p)
    119{
    120	struct iio_poll_func *pf = p;
    121	struct iio_dev *indio_dev = pf->indio_dev;
    122	struct mb1232_data *data = iio_priv(indio_dev);
    123
    124	data->scan.distance = mb1232_read_distance(data);
    125	if (data->scan.distance < 0)
    126		goto err;
    127
    128	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
    129					   pf->timestamp);
    130
    131err:
    132	iio_trigger_notify_done(indio_dev->trig);
    133	return IRQ_HANDLED;
    134}
    135
    136static int mb1232_read_raw(struct iio_dev *indio_dev,
    137			    struct iio_chan_spec const *channel, int *val,
    138			    int *val2, long mask)
    139{
    140	struct mb1232_data *data = iio_priv(indio_dev);
    141	int ret;
    142
    143	if (channel->type != IIO_DISTANCE)
    144		return -EINVAL;
    145
    146	switch (mask) {
    147	case IIO_CHAN_INFO_RAW:
    148		ret = mb1232_read_distance(data);
    149		if (ret < 0)
    150			return ret;
    151		*val = ret;
    152		return IIO_VAL_INT;
    153	case IIO_CHAN_INFO_SCALE:
    154		/* 1 LSB is 1 cm */
    155		*val = 0;
    156		*val2 = 10000;
    157		return IIO_VAL_INT_PLUS_MICRO;
    158	default:
    159		return -EINVAL;
    160	}
    161}
    162
    163static const struct iio_chan_spec mb1232_channels[] = {
    164	{
    165		.type = IIO_DISTANCE,
    166		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
    167				      BIT(IIO_CHAN_INFO_SCALE),
    168		.scan_index = 0,
    169		.scan_type = {
    170			.sign = 's',
    171			.realbits = 16,
    172			.storagebits = 16,
    173			.endianness = IIO_CPU,
    174		},
    175	},
    176	IIO_CHAN_SOFT_TIMESTAMP(1),
    177};
    178
    179static const struct iio_info mb1232_info = {
    180	.read_raw = mb1232_read_raw,
    181};
    182
    183static int mb1232_probe(struct i2c_client *client,
    184					 const struct i2c_device_id *id)
    185{
    186	struct iio_dev *indio_dev;
    187	struct mb1232_data *data;
    188	int ret;
    189	struct device *dev = &client->dev;
    190
    191	if (!i2c_check_functionality(client->adapter,
    192					I2C_FUNC_SMBUS_READ_BYTE |
    193					I2C_FUNC_SMBUS_WRITE_BYTE))
    194		return -ENODEV;
    195
    196	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
    197	if (!indio_dev)
    198		return -ENOMEM;
    199
    200	data = iio_priv(indio_dev);
    201	i2c_set_clientdata(client, indio_dev);
    202	data->client = client;
    203
    204	indio_dev->info = &mb1232_info;
    205	indio_dev->name = id->name;
    206	indio_dev->modes = INDIO_DIRECT_MODE;
    207	indio_dev->channels = mb1232_channels;
    208	indio_dev->num_channels = ARRAY_SIZE(mb1232_channels);
    209
    210	mutex_init(&data->lock);
    211
    212	init_completion(&data->ranging);
    213
    214	data->irqnr = fwnode_irq_get(dev_fwnode(&client->dev), 0);
    215	if (data->irqnr <= 0) {
    216		/* usage of interrupt is optional */
    217		data->irqnr = -1;
    218	} else {
    219		ret = devm_request_irq(dev, data->irqnr, mb1232_handle_irq,
    220				IRQF_TRIGGER_FALLING, id->name, indio_dev);
    221		if (ret < 0) {
    222			dev_err(dev, "request_irq: %d\n", ret);
    223			return ret;
    224		}
    225	}
    226
    227	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
    228			iio_pollfunc_store_time, mb1232_trigger_handler, NULL);
    229	if (ret < 0) {
    230		dev_err(dev, "setup of iio triggered buffer failed\n");
    231		return ret;
    232	}
    233
    234	return devm_iio_device_register(dev, indio_dev);
    235}
    236
    237static const struct of_device_id of_mb1232_match[] = {
    238	{ .compatible = "maxbotix,mb1202", },
    239	{ .compatible = "maxbotix,mb1212", },
    240	{ .compatible = "maxbotix,mb1222", },
    241	{ .compatible = "maxbotix,mb1232", },
    242	{ .compatible = "maxbotix,mb1242", },
    243	{ .compatible = "maxbotix,mb7040", },
    244	{ .compatible = "maxbotix,mb7137", },
    245	{},
    246};
    247
    248MODULE_DEVICE_TABLE(of, of_mb1232_match);
    249
    250static const struct i2c_device_id mb1232_id[] = {
    251	{ "maxbotix-mb1202", },
    252	{ "maxbotix-mb1212", },
    253	{ "maxbotix-mb1222", },
    254	{ "maxbotix-mb1232", },
    255	{ "maxbotix-mb1242", },
    256	{ "maxbotix-mb7040", },
    257	{ "maxbotix-mb7137", },
    258	{ }
    259};
    260MODULE_DEVICE_TABLE(i2c, mb1232_id);
    261
    262static struct i2c_driver mb1232_driver = {
    263	.driver = {
    264		.name	= "maxbotix-mb1232",
    265		.of_match_table	= of_mb1232_match,
    266	},
    267	.probe = mb1232_probe,
    268	.id_table = mb1232_id,
    269};
    270module_i2c_driver(mb1232_driver);
    271
    272MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
    273MODULE_DESCRIPTION("Maxbotix I2CXL-MaxSonar i2c ultrasonic ranger driver");
    274MODULE_LICENSE("GPL");