newtonkbd.c (3897B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Copyright (c) 2000 Justin Cormack 4 */ 5 6/* 7 * Newton keyboard driver for Linux 8 */ 9 10/* 11 */ 12 13#include <linux/slab.h> 14#include <linux/module.h> 15#include <linux/input.h> 16#include <linux/serio.h> 17 18#define DRIVER_DESC "Newton keyboard driver" 19 20MODULE_AUTHOR("Justin Cormack <j.cormack@doc.ic.ac.uk>"); 21MODULE_DESCRIPTION(DRIVER_DESC); 22MODULE_LICENSE("GPL"); 23 24#define NKBD_KEY 0x7f 25#define NKBD_PRESS 0x80 26 27static unsigned char nkbd_keycode[128] = { 28 KEY_A, KEY_S, KEY_D, KEY_F, KEY_H, KEY_G, KEY_Z, KEY_X, 29 KEY_C, KEY_V, 0, KEY_B, KEY_Q, KEY_W, KEY_E, KEY_R, 30 KEY_Y, KEY_T, KEY_1, KEY_2, KEY_3, KEY_4, KEY_6, KEY_5, 31 KEY_EQUAL, KEY_9, KEY_7, KEY_MINUS, KEY_8, KEY_0, KEY_RIGHTBRACE, KEY_O, 32 KEY_U, KEY_LEFTBRACE, KEY_I, KEY_P, KEY_ENTER, KEY_L, KEY_J, KEY_APOSTROPHE, 33 KEY_K, KEY_SEMICOLON, KEY_BACKSLASH, KEY_COMMA, KEY_SLASH, KEY_N, KEY_M, KEY_DOT, 34 KEY_TAB, KEY_SPACE, KEY_GRAVE, KEY_DELETE, 0, 0, 0, KEY_LEFTMETA, 35 KEY_LEFTSHIFT, KEY_CAPSLOCK, KEY_LEFTALT, KEY_LEFTCTRL, KEY_RIGHTSHIFT, 0, 0, 0, 36 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 37 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 38 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 39 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 40 KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0 41}; 42 43struct nkbd { 44 unsigned char keycode[128]; 45 struct input_dev *dev; 46 struct serio *serio; 47 char phys[32]; 48}; 49 50static irqreturn_t nkbd_interrupt(struct serio *serio, 51 unsigned char data, unsigned int flags) 52{ 53 struct nkbd *nkbd = serio_get_drvdata(serio); 54 55 /* invalid scan codes are probably the init sequence, so we ignore them */ 56 if (nkbd->keycode[data & NKBD_KEY]) { 57 input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); 58 input_sync(nkbd->dev); 59 } 60 61 else if (data == 0xe7) /* end of init sequence */ 62 printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys); 63 return IRQ_HANDLED; 64 65} 66 67static int nkbd_connect(struct serio *serio, struct serio_driver *drv) 68{ 69 struct nkbd *nkbd; 70 struct input_dev *input_dev; 71 int err = -ENOMEM; 72 int i; 73 74 nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL); 75 input_dev = input_allocate_device(); 76 if (!nkbd || !input_dev) 77 goto fail1; 78 79 nkbd->serio = serio; 80 nkbd->dev = input_dev; 81 snprintf(nkbd->phys, sizeof(nkbd->phys), "%s/input0", serio->phys); 82 memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); 83 84 input_dev->name = "Newton Keyboard"; 85 input_dev->phys = nkbd->phys; 86 input_dev->id.bustype = BUS_RS232; 87 input_dev->id.vendor = SERIO_NEWTON; 88 input_dev->id.product = 0x0001; 89 input_dev->id.version = 0x0100; 90 input_dev->dev.parent = &serio->dev; 91 92 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); 93 input_dev->keycode = nkbd->keycode; 94 input_dev->keycodesize = sizeof(unsigned char); 95 input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode); 96 for (i = 0; i < 128; i++) 97 set_bit(nkbd->keycode[i], input_dev->keybit); 98 clear_bit(0, input_dev->keybit); 99 100 serio_set_drvdata(serio, nkbd); 101 102 err = serio_open(serio, drv); 103 if (err) 104 goto fail2; 105 106 err = input_register_device(nkbd->dev); 107 if (err) 108 goto fail3; 109 110 return 0; 111 112 fail3: serio_close(serio); 113 fail2: serio_set_drvdata(serio, NULL); 114 fail1: input_free_device(input_dev); 115 kfree(nkbd); 116 return err; 117} 118 119static void nkbd_disconnect(struct serio *serio) 120{ 121 struct nkbd *nkbd = serio_get_drvdata(serio); 122 123 serio_close(serio); 124 serio_set_drvdata(serio, NULL); 125 input_unregister_device(nkbd->dev); 126 kfree(nkbd); 127} 128 129static const struct serio_device_id nkbd_serio_ids[] = { 130 { 131 .type = SERIO_RS232, 132 .proto = SERIO_NEWTON, 133 .id = SERIO_ANY, 134 .extra = SERIO_ANY, 135 }, 136 { 0 } 137}; 138 139MODULE_DEVICE_TABLE(serio, nkbd_serio_ids); 140 141static struct serio_driver nkbd_drv = { 142 .driver = { 143 .name = "newtonkbd", 144 }, 145 .description = DRIVER_DESC, 146 .id_table = nkbd_serio_ids, 147 .interrupt = nkbd_interrupt, 148 .connect = nkbd_connect, 149 .disconnect = nkbd_disconnect, 150}; 151 152module_serio_driver(nkbd_drv);