mma8450.c (4666B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Driver for Freescale's 3-Axis Accelerometer MMA8450 4 * 5 * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. 6 */ 7 8#include <linux/kernel.h> 9#include <linux/module.h> 10#include <linux/slab.h> 11#include <linux/delay.h> 12#include <linux/i2c.h> 13#include <linux/input.h> 14#include <linux/of_device.h> 15 16#define MMA8450_DRV_NAME "mma8450" 17 18#define MODE_CHANGE_DELAY_MS 100 19#define POLL_INTERVAL 100 20#define POLL_INTERVAL_MAX 500 21 22/* register definitions */ 23#define MMA8450_STATUS 0x00 24#define MMA8450_STATUS_ZXYDR 0x08 25 26#define MMA8450_OUT_X8 0x01 27#define MMA8450_OUT_Y8 0x02 28#define MMA8450_OUT_Z8 0x03 29 30#define MMA8450_OUT_X_LSB 0x05 31#define MMA8450_OUT_X_MSB 0x06 32#define MMA8450_OUT_Y_LSB 0x07 33#define MMA8450_OUT_Y_MSB 0x08 34#define MMA8450_OUT_Z_LSB 0x09 35#define MMA8450_OUT_Z_MSB 0x0a 36 37#define MMA8450_XYZ_DATA_CFG 0x16 38 39#define MMA8450_CTRL_REG1 0x38 40#define MMA8450_CTRL_REG2 0x39 41 42static int mma8450_read(struct i2c_client *c, unsigned int off) 43{ 44 int ret; 45 46 ret = i2c_smbus_read_byte_data(c, off); 47 if (ret < 0) 48 dev_err(&c->dev, 49 "failed to read register 0x%02x, error %d\n", 50 off, ret); 51 52 return ret; 53} 54 55static int mma8450_write(struct i2c_client *c, unsigned int off, u8 v) 56{ 57 int error; 58 59 error = i2c_smbus_write_byte_data(c, off, v); 60 if (error < 0) { 61 dev_err(&c->dev, 62 "failed to write to register 0x%02x, error %d\n", 63 off, error); 64 return error; 65 } 66 67 return 0; 68} 69 70static int mma8450_read_block(struct i2c_client *c, unsigned int off, 71 u8 *buf, size_t size) 72{ 73 int err; 74 75 err = i2c_smbus_read_i2c_block_data(c, off, size, buf); 76 if (err < 0) { 77 dev_err(&c->dev, 78 "failed to read block data at 0x%02x, error %d\n", 79 MMA8450_OUT_X_LSB, err); 80 return err; 81 } 82 83 return 0; 84} 85 86static void mma8450_poll(struct input_dev *input) 87{ 88 struct i2c_client *c = input_get_drvdata(input); 89 int x, y, z; 90 int ret; 91 u8 buf[6]; 92 93 ret = mma8450_read(c, MMA8450_STATUS); 94 if (ret < 0) 95 return; 96 97 if (!(ret & MMA8450_STATUS_ZXYDR)) 98 return; 99 100 ret = mma8450_read_block(c, MMA8450_OUT_X_LSB, buf, sizeof(buf)); 101 if (ret < 0) 102 return; 103 104 x = ((int)(s8)buf[1] << 4) | (buf[0] & 0xf); 105 y = ((int)(s8)buf[3] << 4) | (buf[2] & 0xf); 106 z = ((int)(s8)buf[5] << 4) | (buf[4] & 0xf); 107 108 input_report_abs(input, ABS_X, x); 109 input_report_abs(input, ABS_Y, y); 110 input_report_abs(input, ABS_Z, z); 111 input_sync(input); 112} 113 114/* Initialize the MMA8450 chip */ 115static int mma8450_open(struct input_dev *input) 116{ 117 struct i2c_client *c = input_get_drvdata(input); 118 int err; 119 120 /* enable all events from X/Y/Z, no FIFO */ 121 err = mma8450_write(c, MMA8450_XYZ_DATA_CFG, 0x07); 122 if (err) 123 return err; 124 125 /* 126 * Sleep mode poll rate - 50Hz 127 * System output data rate - 400Hz 128 * Full scale selection - Active, +/- 2G 129 */ 130 err = mma8450_write(c, MMA8450_CTRL_REG1, 0x01); 131 if (err) 132 return err; 133 134 msleep(MODE_CHANGE_DELAY_MS); 135 return 0; 136} 137 138static void mma8450_close(struct input_dev *input) 139{ 140 struct i2c_client *c = input_get_drvdata(input); 141 142 mma8450_write(c, MMA8450_CTRL_REG1, 0x00); 143 mma8450_write(c, MMA8450_CTRL_REG2, 0x01); 144} 145 146/* 147 * I2C init/probing/exit functions 148 */ 149static int mma8450_probe(struct i2c_client *c, 150 const struct i2c_device_id *id) 151{ 152 struct input_dev *input; 153 int err; 154 155 input = devm_input_allocate_device(&c->dev); 156 if (!input) 157 return -ENOMEM; 158 159 input_set_drvdata(input, c); 160 161 input->name = MMA8450_DRV_NAME; 162 input->id.bustype = BUS_I2C; 163 164 input->open = mma8450_open; 165 input->close = mma8450_close; 166 167 input_set_abs_params(input, ABS_X, -2048, 2047, 32, 32); 168 input_set_abs_params(input, ABS_Y, -2048, 2047, 32, 32); 169 input_set_abs_params(input, ABS_Z, -2048, 2047, 32, 32); 170 171 err = input_setup_polling(input, mma8450_poll); 172 if (err) { 173 dev_err(&c->dev, "failed to set up polling\n"); 174 return err; 175 } 176 177 input_set_poll_interval(input, POLL_INTERVAL); 178 input_set_max_poll_interval(input, POLL_INTERVAL_MAX); 179 180 err = input_register_device(input); 181 if (err) { 182 dev_err(&c->dev, "failed to register input device\n"); 183 return err; 184 } 185 186 return 0; 187} 188 189static const struct i2c_device_id mma8450_id[] = { 190 { MMA8450_DRV_NAME, 0 }, 191 { }, 192}; 193MODULE_DEVICE_TABLE(i2c, mma8450_id); 194 195static const struct of_device_id mma8450_dt_ids[] = { 196 { .compatible = "fsl,mma8450", }, 197 { /* sentinel */ } 198}; 199MODULE_DEVICE_TABLE(of, mma8450_dt_ids); 200 201static struct i2c_driver mma8450_driver = { 202 .driver = { 203 .name = MMA8450_DRV_NAME, 204 .of_match_table = mma8450_dt_ids, 205 }, 206 .probe = mma8450_probe, 207 .id_table = mma8450_id, 208}; 209 210module_i2c_driver(mma8450_driver); 211 212MODULE_AUTHOR("Freescale Semiconductor, Inc."); 213MODULE_DESCRIPTION("MMA8450 3-Axis Accelerometer Driver"); 214MODULE_LICENSE("GPL");