elantech.h (4825B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Elantech Touchpad driver (v6) 4 * 5 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> 6 * 7 * Trademarks are the property of their respective owners. 8 */ 9 10#ifndef _ELANTECH_H 11#define _ELANTECH_H 12 13/* 14 * Command values for Synaptics style queries 15 */ 16#define ETP_FW_ID_QUERY 0x00 17#define ETP_FW_VERSION_QUERY 0x01 18#define ETP_CAPABILITIES_QUERY 0x02 19#define ETP_SAMPLE_QUERY 0x03 20#define ETP_RESOLUTION_QUERY 0x04 21#define ETP_ICBODY_QUERY 0x05 22 23/* 24 * Command values for register reading or writing 25 */ 26#define ETP_REGISTER_READ 0x10 27#define ETP_REGISTER_WRITE 0x11 28#define ETP_REGISTER_READWRITE 0x00 29 30/* 31 * Hardware version 2 custom PS/2 command value 32 */ 33#define ETP_PS2_CUSTOM_COMMAND 0xf8 34 35/* 36 * Times to retry a ps2_command and millisecond delay between tries 37 */ 38#define ETP_PS2_COMMAND_TRIES 3 39#define ETP_PS2_COMMAND_DELAY 500 40 41/* 42 * Times to try to read back a register and millisecond delay between tries 43 */ 44#define ETP_READ_BACK_TRIES 5 45#define ETP_READ_BACK_DELAY 2000 46 47/* 48 * Register bitmasks for hardware version 1 49 */ 50#define ETP_R10_ABSOLUTE_MODE 0x04 51#define ETP_R11_4_BYTE_MODE 0x02 52 53/* 54 * Capability bitmasks 55 */ 56#define ETP_CAP_HAS_ROCKER 0x04 57 58/* 59 * One hard to find application note states that X axis range is 0 to 576 60 * and Y axis range is 0 to 384 for harware version 1. 61 * Edge fuzz might be necessary because of bezel around the touchpad 62 */ 63#define ETP_EDGE_FUZZ_V1 32 64 65#define ETP_XMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) 66#define ETP_XMAX_V1 (576 - ETP_EDGE_FUZZ_V1) 67#define ETP_YMIN_V1 ( 0 + ETP_EDGE_FUZZ_V1) 68#define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) 69 70/* 71 * The resolution for older v2 hardware doubled. 72 * (newer v2's firmware provides command so we can query) 73 */ 74#define ETP_XMIN_V2 0 75#define ETP_XMAX_V2 1152 76#define ETP_YMIN_V2 0 77#define ETP_YMAX_V2 768 78 79#define ETP_PMIN_V2 0 80#define ETP_PMAX_V2 255 81#define ETP_WMIN_V2 0 82#define ETP_WMAX_V2 15 83 84/* 85 * v3 hardware has 2 kinds of packet types, 86 * v4 hardware has 3. 87 */ 88#define PACKET_UNKNOWN 0x01 89#define PACKET_DEBOUNCE 0x02 90#define PACKET_V3_HEAD 0x03 91#define PACKET_V3_TAIL 0x04 92#define PACKET_V4_HEAD 0x05 93#define PACKET_V4_MOTION 0x06 94#define PACKET_V4_STATUS 0x07 95#define PACKET_TRACKPOINT 0x08 96 97/* 98 * track up to 5 fingers for v4 hardware 99 */ 100#define ETP_MAX_FINGERS 5 101 102/* 103 * weight value for v4 hardware 104 */ 105#define ETP_WEIGHT_VALUE 5 106 107/* 108 * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04) 109 */ 110#define ETP_BUS_PS2_ONLY 0 111#define ETP_BUS_SMB_ALERT_ONLY 1 112#define ETP_BUS_SMB_HST_NTFY_ONLY 2 113#define ETP_BUS_PS2_SMB_ALERT 3 114#define ETP_BUS_PS2_SMB_HST_NTFY 4 115 116/* 117 * New ICs are either using SMBus Host Notify or just plain PS2. 118 * 119 * ETP_FW_VERSION_QUERY is: 120 * Byte 1: 121 * - bit 0..3: IC BODY 122 * Byte 2: 123 * - bit 4: HiddenButton 124 * - bit 5: PS2_SMBUS_NOTIFY 125 * - bit 6: PS2CRCCheck 126 */ 127#define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version) \ 128 ((((fw_version) & 0x0f2000) == 0x0f2000) && \ 129 ((fw_version) & 0x0000ff) > 0) 130 131/* 132 * The base position for one finger, v4 hardware 133 */ 134struct finger_pos { 135 unsigned int x; 136 unsigned int y; 137}; 138 139struct elantech_device_info { 140 unsigned char capabilities[3]; 141 unsigned char samples[3]; 142 unsigned char debug; 143 unsigned char hw_version; 144 unsigned char pattern; 145 unsigned int fw_version; 146 unsigned int ic_version; 147 unsigned int product_id; 148 unsigned int x_min; 149 unsigned int y_min; 150 unsigned int x_max; 151 unsigned int y_max; 152 unsigned int x_res; 153 unsigned int y_res; 154 unsigned int x_traces; 155 unsigned int y_traces; 156 unsigned int width; 157 unsigned int bus; 158 bool paritycheck; 159 bool jumpy_cursor; 160 bool reports_pressure; 161 bool crc_enabled; 162 bool set_hw_resolution; 163 bool has_trackpoint; 164 bool has_middle_button; 165 int (*send_cmd)(struct psmouse *psmouse, unsigned char c, 166 unsigned char *param); 167}; 168 169struct elantech_data { 170 struct input_dev *tp_dev; /* Relative device for trackpoint */ 171 char tp_phys[32]; 172 unsigned char reg_07; 173 unsigned char reg_10; 174 unsigned char reg_11; 175 unsigned char reg_20; 176 unsigned char reg_21; 177 unsigned char reg_22; 178 unsigned char reg_23; 179 unsigned char reg_24; 180 unsigned char reg_25; 181 unsigned char reg_26; 182 unsigned int single_finger_reports; 183 unsigned int y_max; 184 unsigned int width; 185 struct finger_pos mt[ETP_MAX_FINGERS]; 186 unsigned char parity[256]; 187 struct elantech_device_info info; 188 void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate); 189}; 190 191int elantech_detect(struct psmouse *psmouse, bool set_properties); 192int elantech_init_ps2(struct psmouse *psmouse); 193 194#ifdef CONFIG_MOUSE_PS2_ELANTECH 195int elantech_init(struct psmouse *psmouse); 196#else 197static inline int elantech_init(struct psmouse *psmouse) 198{ 199 return -ENOSYS; 200} 201#endif /* CONFIG_MOUSE_PS2_ELANTECH */ 202 203int elantech_init_smbus(struct psmouse *psmouse); 204 205#endif