egalax_ts.c (6963B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Driver for EETI eGalax Multiple Touch Controller 4 * 5 * Copyright (C) 2011 Freescale Semiconductor, Inc. 6 * 7 * based on max11801_ts.c 8 */ 9 10/* EETI eGalax serial touch screen controller is a I2C based multiple 11 * touch screen controller, it supports 5 point multiple touch. */ 12 13/* TODO: 14 - auto idle mode support 15*/ 16 17#include <linux/module.h> 18#include <linux/i2c.h> 19#include <linux/interrupt.h> 20#include <linux/input.h> 21#include <linux/irq.h> 22#include <linux/gpio.h> 23#include <linux/delay.h> 24#include <linux/slab.h> 25#include <linux/bitops.h> 26#include <linux/input/mt.h> 27#include <linux/of_gpio.h> 28 29/* 30 * Mouse Mode: some panel may configure the controller to mouse mode, 31 * which can only report one point at a given time. 32 * This driver will ignore events in this mode. 33 */ 34#define REPORT_MODE_MOUSE 0x1 35/* 36 * Vendor Mode: this mode is used to transfer some vendor specific 37 * messages. 38 * This driver will ignore events in this mode. 39 */ 40#define REPORT_MODE_VENDOR 0x3 41/* Multiple Touch Mode */ 42#define REPORT_MODE_MTTOUCH 0x4 43 44#define MAX_SUPPORT_POINTS 5 45 46#define EVENT_VALID_OFFSET 7 47#define EVENT_VALID_MASK (0x1 << EVENT_VALID_OFFSET) 48#define EVENT_ID_OFFSET 2 49#define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET) 50#define EVENT_IN_RANGE (0x1 << 1) 51#define EVENT_DOWN_UP (0X1 << 0) 52 53#define MAX_I2C_DATA_LEN 10 54 55#define EGALAX_MAX_X 32760 56#define EGALAX_MAX_Y 32760 57#define EGALAX_MAX_TRIES 100 58 59struct egalax_ts { 60 struct i2c_client *client; 61 struct input_dev *input_dev; 62}; 63 64static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) 65{ 66 struct egalax_ts *ts = dev_id; 67 struct input_dev *input_dev = ts->input_dev; 68 struct i2c_client *client = ts->client; 69 u8 buf[MAX_I2C_DATA_LEN]; 70 int id, ret, x, y, z; 71 int tries = 0; 72 bool down, valid; 73 u8 state; 74 75 do { 76 ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN); 77 } while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES); 78 79 if (ret < 0) 80 return IRQ_HANDLED; 81 82 if (buf[0] != REPORT_MODE_MTTOUCH) { 83 /* ignore mouse events and vendor events */ 84 return IRQ_HANDLED; 85 } 86 87 state = buf[1]; 88 x = (buf[3] << 8) | buf[2]; 89 y = (buf[5] << 8) | buf[4]; 90 z = (buf[7] << 8) | buf[6]; 91 92 valid = state & EVENT_VALID_MASK; 93 id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET; 94 down = state & EVENT_DOWN_UP; 95 96 if (!valid || id > MAX_SUPPORT_POINTS) { 97 dev_dbg(&client->dev, "point invalid\n"); 98 return IRQ_HANDLED; 99 } 100 101 input_mt_slot(input_dev, id); 102 input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down); 103 104 dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d", 105 down ? "down" : "up", id, x, y, z); 106 107 if (down) { 108 input_report_abs(input_dev, ABS_MT_POSITION_X, x); 109 input_report_abs(input_dev, ABS_MT_POSITION_Y, y); 110 input_report_abs(input_dev, ABS_MT_PRESSURE, z); 111 } 112 113 input_mt_report_pointer_emulation(input_dev, true); 114 input_sync(input_dev); 115 116 return IRQ_HANDLED; 117} 118 119/* wake up controller by an falling edge of interrupt gpio. */ 120static int egalax_wake_up_device(struct i2c_client *client) 121{ 122 struct device_node *np = client->dev.of_node; 123 int gpio; 124 int ret; 125 126 if (!np) 127 return -ENODEV; 128 129 gpio = of_get_named_gpio(np, "wakeup-gpios", 0); 130 if (!gpio_is_valid(gpio)) 131 return -ENODEV; 132 133 ret = gpio_request(gpio, "egalax_irq"); 134 if (ret < 0) { 135 dev_err(&client->dev, 136 "request gpio failed, cannot wake up controller: %d\n", 137 ret); 138 return ret; 139 } 140 141 /* wake up controller via an falling edge on IRQ gpio. */ 142 gpio_direction_output(gpio, 0); 143 gpio_set_value(gpio, 1); 144 145 /* controller should be waken up, return irq. */ 146 gpio_direction_input(gpio); 147 gpio_free(gpio); 148 149 return 0; 150} 151 152static int egalax_firmware_version(struct i2c_client *client) 153{ 154 static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 }; 155 int ret; 156 157 ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN); 158 if (ret < 0) 159 return ret; 160 161 return 0; 162} 163 164static int egalax_ts_probe(struct i2c_client *client, 165 const struct i2c_device_id *id) 166{ 167 struct egalax_ts *ts; 168 struct input_dev *input_dev; 169 int error; 170 171 ts = devm_kzalloc(&client->dev, sizeof(struct egalax_ts), GFP_KERNEL); 172 if (!ts) { 173 dev_err(&client->dev, "Failed to allocate memory\n"); 174 return -ENOMEM; 175 } 176 177 input_dev = devm_input_allocate_device(&client->dev); 178 if (!input_dev) { 179 dev_err(&client->dev, "Failed to allocate memory\n"); 180 return -ENOMEM; 181 } 182 183 ts->client = client; 184 ts->input_dev = input_dev; 185 186 /* controller may be in sleep, wake it up. */ 187 error = egalax_wake_up_device(client); 188 if (error) { 189 dev_err(&client->dev, "Failed to wake up the controller\n"); 190 return error; 191 } 192 193 error = egalax_firmware_version(client); 194 if (error < 0) { 195 dev_err(&client->dev, "Failed to read firmware version\n"); 196 return error; 197 } 198 199 input_dev->name = "EETI eGalax Touch Screen"; 200 input_dev->id.bustype = BUS_I2C; 201 202 __set_bit(EV_ABS, input_dev->evbit); 203 __set_bit(EV_KEY, input_dev->evbit); 204 __set_bit(BTN_TOUCH, input_dev->keybit); 205 206 input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0); 207 input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0); 208 input_set_abs_params(input_dev, 209 ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); 210 input_set_abs_params(input_dev, 211 ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0); 212 input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0); 213 214 error = devm_request_threaded_irq(&client->dev, client->irq, NULL, 215 egalax_ts_interrupt, 216 IRQF_TRIGGER_LOW | IRQF_ONESHOT, 217 "egalax_ts", ts); 218 if (error < 0) { 219 dev_err(&client->dev, "Failed to register interrupt\n"); 220 return error; 221 } 222 223 error = input_register_device(ts->input_dev); 224 if (error) 225 return error; 226 227 return 0; 228} 229 230static const struct i2c_device_id egalax_ts_id[] = { 231 { "egalax_ts", 0 }, 232 { } 233}; 234MODULE_DEVICE_TABLE(i2c, egalax_ts_id); 235 236static int __maybe_unused egalax_ts_suspend(struct device *dev) 237{ 238 static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = { 239 0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0 240 }; 241 struct i2c_client *client = to_i2c_client(dev); 242 int ret; 243 244 if (device_may_wakeup(dev)) 245 return enable_irq_wake(client->irq); 246 247 ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN); 248 return ret > 0 ? 0 : ret; 249} 250 251static int __maybe_unused egalax_ts_resume(struct device *dev) 252{ 253 struct i2c_client *client = to_i2c_client(dev); 254 255 if (device_may_wakeup(dev)) 256 return disable_irq_wake(client->irq); 257 258 return egalax_wake_up_device(client); 259} 260 261static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); 262 263static const struct of_device_id egalax_ts_dt_ids[] = { 264 { .compatible = "eeti,egalax_ts" }, 265 { /* sentinel */ } 266}; 267MODULE_DEVICE_TABLE(of, egalax_ts_dt_ids); 268 269static struct i2c_driver egalax_ts_driver = { 270 .driver = { 271 .name = "egalax_ts", 272 .pm = &egalax_ts_pm_ops, 273 .of_match_table = egalax_ts_dt_ids, 274 }, 275 .id_table = egalax_ts_id, 276 .probe = egalax_ts_probe, 277}; 278 279module_i2c_driver(egalax_ts_driver); 280 281MODULE_AUTHOR("Freescale Semiconductor, Inc."); 282MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); 283MODULE_LICENSE("GPL");