tpci200.h (4907B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * driver for the carrier TEWS TPCI-200 4 * 5 * Copyright (C) 2009-2012 CERN (www.cern.ch) 6 * Author: Nicolas Serafini, EIC2 SA 7 * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> 8 */ 9 10#ifndef _TPCI200_H_ 11#define _TPCI200_H_ 12 13#include <linux/limits.h> 14#include <linux/pci.h> 15#include <linux/spinlock.h> 16#include <linux/swab.h> 17#include <linux/io.h> 18#include <linux/ipack.h> 19 20#define TPCI200_NB_SLOT 0x4 21#define TPCI200_NB_BAR 0x6 22 23#define TPCI200_VENDOR_ID 0x1498 24#define TPCI200_DEVICE_ID 0x30C8 25#define TPCI200_SUBVENDOR_ID 0x1498 26#define TPCI200_SUBDEVICE_ID 0x300A 27 28#define TPCI200_CFG_MEM_BAR 0 29#define TPCI200_IP_INTERFACE_BAR 2 30#define TPCI200_IO_ID_INT_SPACES_BAR 3 31#define TPCI200_MEM16_SPACE_BAR 4 32#define TPCI200_MEM8_SPACE_BAR 5 33 34struct tpci200_regs { 35 __le16 revision; 36 /* writes to control should occur with the mutex held to protect 37 * read-modify-write operations */ 38 __le16 control[4]; 39 __le16 reset; 40 __le16 status; 41 u8 reserved[242]; 42} __packed; 43 44#define TPCI200_IFACE_SIZE 0x100 45 46#define TPCI200_IO_SPACE_OFF 0x0000 47#define TPCI200_IO_SPACE_INTERVAL 0x0100 48#define TPCI200_IO_SPACE_SIZE 0x0080 49#define TPCI200_ID_SPACE_OFF 0x0080 50#define TPCI200_ID_SPACE_INTERVAL 0x0100 51#define TPCI200_ID_SPACE_SIZE 0x0040 52#define TPCI200_INT_SPACE_OFF 0x00C0 53#define TPCI200_INT_SPACE_INTERVAL 0x0100 54#define TPCI200_INT_SPACE_SIZE 0x0040 55#define TPCI200_IOIDINT_SIZE 0x0400 56 57#define TPCI200_MEM8_SPACE_INTERVAL 0x00400000 58#define TPCI200_MEM8_SPACE_SIZE 0x00400000 59#define TPCI200_MEM16_SPACE_INTERVAL 0x00800000 60#define TPCI200_MEM16_SPACE_SIZE 0x00800000 61 62/* control field in tpci200_regs */ 63#define TPCI200_INT0_EN 0x0040 64#define TPCI200_INT1_EN 0x0080 65#define TPCI200_INT0_EDGE 0x0010 66#define TPCI200_INT1_EDGE 0x0020 67#define TPCI200_ERR_INT_EN 0x0008 68#define TPCI200_TIME_INT_EN 0x0004 69#define TPCI200_RECOVER_EN 0x0002 70#define TPCI200_CLK32 0x0001 71 72/* reset field in tpci200_regs */ 73#define TPCI200_A_RESET 0x0001 74#define TPCI200_B_RESET 0x0002 75#define TPCI200_C_RESET 0x0004 76#define TPCI200_D_RESET 0x0008 77 78/* status field in tpci200_regs */ 79#define TPCI200_A_TIMEOUT 0x1000 80#define TPCI200_B_TIMEOUT 0x2000 81#define TPCI200_C_TIMEOUT 0x4000 82#define TPCI200_D_TIMEOUT 0x8000 83 84#define TPCI200_A_ERROR 0x0100 85#define TPCI200_B_ERROR 0x0200 86#define TPCI200_C_ERROR 0x0400 87#define TPCI200_D_ERROR 0x0800 88 89#define TPCI200_A_INT0 0x0001 90#define TPCI200_A_INT1 0x0002 91#define TPCI200_B_INT0 0x0004 92#define TPCI200_B_INT1 0x0008 93#define TPCI200_C_INT0 0x0010 94#define TPCI200_C_INT1 0x0020 95#define TPCI200_D_INT0 0x0040 96#define TPCI200_D_INT1 0x0080 97 98#define TPCI200_SLOT_INT_MASK 0x00FF 99 100/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */ 101#define LAS1_DESC 0x2C 102#define LAS2_DESC 0x30 103 104/* Bits in the LAS?_DESC registers */ 105#define LAS_BIT_BIGENDIAN 24 106 107#define VME_IOID_SPACE "IOID" 108#define VME_MEM_SPACE "MEM" 109 110/** 111 * struct slot_irq - slot IRQ definition. 112 * @vector Vector number 113 * @handler Handler called when IRQ arrives 114 * @arg Handler argument 115 * 116 */ 117struct slot_irq { 118 struct ipack_device *holder; 119 int vector; 120 irqreturn_t (*handler)(void *); 121 void *arg; 122}; 123 124/** 125 * struct tpci200_slot - data specific to the tpci200 slot. 126 * @slot_id Slot identification gived to external interface 127 * @irq Slot IRQ infos 128 * @io_phys IO physical base address register of the slot 129 * @id_phys ID physical base address register of the slot 130 * @int_phys INT physical base address register of the slot 131 * @mem_phys MEM physical base address register of the slot 132 * 133 */ 134struct tpci200_slot { 135 struct slot_irq *irq; 136}; 137 138/** 139 * struct tpci200_infos - informations specific of the TPCI200 tpci200. 140 * @pci_dev PCI device 141 * @interface_regs Pointer to IP interface space (Bar 2) 142 * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3) 143 * @mem8_space Pointer to MEM space (Bar 4) 144 * 145 */ 146struct tpci200_infos { 147 struct pci_dev *pdev; 148 struct pci_device_id *id_table; 149 struct tpci200_regs __iomem *interface_regs; 150 void __iomem *cfg_regs; 151 struct ipack_bus_device *ipack_bus; 152}; 153struct tpci200_board { 154 unsigned int number; 155 struct mutex mutex; 156 spinlock_t regs_lock; 157 struct tpci200_slot *slots; 158 struct tpci200_infos *info; 159 phys_addr_t mod_mem[IPACK_SPACE_COUNT]; 160}; 161 162#endif /* _TPCI200_H_ */