drx_dap_fasi.h (9140B)
1/* 2 Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc. 3 All rights reserved. 4 5 Redistribution and use in source and binary forms, with or without 6 modification, are permitted provided that the following conditions are met: 7 8 * Redistributions of source code must retain the above copyright notice, 9 this list of conditions and the following disclaimer. 10 * Redistributions in binary form must reproduce the above copyright notice, 11 this list of conditions and the following disclaimer in the documentation 12 and/or other materials provided with the distribution. 13 * Neither the name of Trident Microsystems nor Hauppauge Computer Works 14 nor the names of its contributors may be used to endorse or promote 15 products derived from this software without specific prior written 16 permission. 17 18 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 POSSIBILITY OF SUCH DAMAGE. 29*/ 30 31/******************************************************************************* 32* FILENAME: $Id: drx_dap_fasi.h,v 1.5 2009/07/07 14:21:40 justin Exp $ 33* 34* DESCRIPTION: 35* Part of DRX driver. 36* Data access protocol: Fast Access Sequential Interface (fasi) 37* Fast access, because of short addressing format (16 instead of 32 bits addr) 38* Sequential, because of I2C. 39* 40* USAGE: 41* Include. 42* 43* NOTES: 44* 45* 46*******************************************************************************/ 47 48/*-------- compilation control switches --------------------------------------*/ 49 50#ifndef __DRX_DAP_FASI_H__ 51#define __DRX_DAP_FASI_H__ 52 53/*-------- Required includes -------------------------------------------------*/ 54 55#include "drx_driver.h" 56 57/*-------- Defines, configuring the API --------------------------------------*/ 58 59/******************************************** 60* Allowed address formats 61********************************************/ 62 63/* 64* Comments about short/long addressing format: 65* 66* The DAP FASI offers long address format (4 bytes) and short address format 67* (2 bytes). The DAP can operate in 3 modes: 68* (1) only short 69* (2) only long 70* (3) both long and short but short preferred and long only when necessary 71* 72* These modes must be selected compile time via compile switches. 73* Compile switch settings for the different modes: 74* (1) DRXDAPFASI_LONG_ADDR_ALLOWED=0, DRXDAPFASI_SHORT_ADDR_ALLOWED=1 75* (2) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=0 76* (3) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=1 77* 78* The default setting will be (3) both long and short. 79* The default setting will need no compile switches. 80* The default setting must be overridden if compile switches are already 81* defined. 82* 83*/ 84 85/* set default */ 86#if !defined(DRXDAPFASI_LONG_ADDR_ALLOWED) 87#define DRXDAPFASI_LONG_ADDR_ALLOWED 1 88#endif 89 90/* set default */ 91#if !defined(DRXDAPFASI_SHORT_ADDR_ALLOWED) 92#define DRXDAPFASI_SHORT_ADDR_ALLOWED 1 93#endif 94 95/* check */ 96#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 0) && \ 97 (DRXDAPFASI_SHORT_ADDR_ALLOWED == 0)) 98#error At least one of short- or long-addressing format must be allowed. 99*; /* illegal statement to force compiler error */ 100#endif 101 102/******************************************** 103* Single/master multi master setting 104********************************************/ 105/* 106* Comments about SINGLE MASTER/MULTI MASTER modes: 107* 108* Consider the two sides:1) the master and 2)the slave. 109* 110* Master: 111* Single/multimaster operation set via DRXDAP_SINGLE_MASTER compile switch 112* + single master mode means no use of repeated starts 113* + multi master mode means use of repeated starts 114* Default is single master. 115* Default can be overridden by setting the compile switch DRXDAP_SINGLE_MASTER. 116* 117* Slave: 118* Single/multi master selected via the flags in the FASI protocol. 119* + single master means remember memory address between i2c packets 120* + multimaster means flush memory address between i2c packets 121* Default is single master, DAP FASI changes multi-master setting silently 122* into single master setting. This cannot be overridden. 123* 124*/ 125/* set default */ 126#ifndef DRXDAP_SINGLE_MASTER 127#define DRXDAP_SINGLE_MASTER 0 128#endif 129 130/******************************************** 131* Chunk/mode checking 132********************************************/ 133/* 134* Comments about DRXDAP_MAX_WCHUNKSIZE in single or multi master mode and 135* in combination with short and long addressing format. All text below 136* assumes long addressing format. The table also includes information 137* for short ADDRessing format. 138* 139* In single master mode, data can be written by sending the register address 140* first, then two or four bytes of data in the next packet. 141* Because the device address plus a register address equals five bytes, 142* the minimum chunk size must be five. 143* If ten-bit I2C device addresses are used, the minimum chunk size must be six, 144* because the I2C device address will then occupy two bytes when writing. 145* 146* Data in single master mode is transferred as follows: 147* <S> <devW> a0 a1 a2 a3 <P> 148* <S> <devW> d0 d1 [d2 d3] <P> 149* .. 150* or 151* .. 152* <S> <devW> a0 a1 a2 a3 <P> 153* <S> <devR> --- <P> 154* 155* In multi-master mode, the data must immediately follow the address (an I2C 156* stop resets the internal address), and hence the minimum chunk size is 157* 1 <I2C address> + 4 (register address) + 2 (data to send) = 7 bytes (8 if 158* 10-bit I2C device addresses are used). 159* 160* The 7-bit or 10-bit i2c address parameters is a runtime parameter. 161* The other parameters can be limited via compile time switches. 162* 163*------------------------------------------------------------------------------- 164* 165* Minimum chunk size table (in bytes): 166* 167* +----------------+----------------+ 168* | 7b i2c addr | 10b i2c addr | 169* +----------------+----------------+ 170* | single | multi | single | multi | 171* ------+--------+-------+--------+-------+ 172* short | 3 | 5 | 4 | 6 | 173* long | 5 | 7 | 6 | 8 | 174* ------+--------+-------+--------+-------+ 175* 176*/ 177 178/* set default */ 179#if !defined(DRXDAP_MAX_WCHUNKSIZE) 180#define DRXDAP_MAX_WCHUNKSIZE 254 181#endif 182 183/* check */ 184#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 0) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 185#if DRXDAP_SINGLE_MASTER 186#define DRXDAP_MAX_WCHUNKSIZE_MIN 3 187#else 188#define DRXDAP_MAX_WCHUNKSIZE_MIN 5 189#endif 190#else 191#if DRXDAP_SINGLE_MASTER 192#define DRXDAP_MAX_WCHUNKSIZE_MIN 5 193#else 194#define DRXDAP_MAX_WCHUNKSIZE_MIN 7 195#endif 196#endif 197 198#if DRXDAP_MAX_WCHUNKSIZE < DRXDAP_MAX_WCHUNKSIZE_MIN 199#if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 0) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 200#if DRXDAP_SINGLE_MASTER 201#error DRXDAP_MAX_WCHUNKSIZE must be at least 3 in single master mode 202*; /* illegal statement to force compiler error */ 203#else 204#error DRXDAP_MAX_WCHUNKSIZE must be at least 5 in multi master mode 205*; /* illegal statement to force compiler error */ 206#endif 207#else 208#if DRXDAP_SINGLE_MASTER 209#error DRXDAP_MAX_WCHUNKSIZE must be at least 5 in single master mode 210*; /* illegal statement to force compiler error */ 211#else 212#error DRXDAP_MAX_WCHUNKSIZE must be at least 7 in multi master mode 213*; /* illegal statement to force compiler error */ 214#endif 215#endif 216#endif 217 218/* set default */ 219#if !defined(DRXDAP_MAX_RCHUNKSIZE) 220#define DRXDAP_MAX_RCHUNKSIZE 254 221#endif 222 223/* check */ 224#if DRXDAP_MAX_RCHUNKSIZE < 2 225#error DRXDAP_MAX_RCHUNKSIZE must be at least 2 226*; /* illegal statement to force compiler error */ 227#endif 228 229/* check */ 230#if DRXDAP_MAX_RCHUNKSIZE & 1 231#error DRXDAP_MAX_RCHUNKSIZE must be even 232*; /* illegal statement to force compiler error */ 233#endif 234 235/*-------- Public API functions ----------------------------------------------*/ 236 237extern struct drx_access_func drx_dap_fasi_funct_g; 238 239#define DRXDAP_FASI_RMW 0x10000000 240#define DRXDAP_FASI_BROADCAST 0x20000000 241#define DRXDAP_FASI_CLEARCRC 0x80000000 242#define DRXDAP_FASI_SINGLE_MASTER 0xC0000000 243#define DRXDAP_FASI_MULTI_MASTER 0x40000000 244#define DRXDAP_FASI_SMM_SWITCH 0x40000000 /* single/multi master switch */ 245#define DRXDAP_FASI_MODEFLAGS 0xC0000000 246#define DRXDAP_FASI_FLAGS 0xF0000000 247 248#define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr)>>22)&0x3F) 249#define DRXDAP_FASI_ADDR2BANK(addr) (((addr)>>16)&0x3F) 250#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr)&0x7FFF) 251 252#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) 253#define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0) 254#define DRXDAP_FASI_OFFSET_TOO_LARGE(addr) (((addr) & 0x00008000) != 0) 255 256#endif /* __DRX_DAP_FASI_H__ */