cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

s5k4ecgx.c (26218B)


      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC
      4 * with an Embedded Image Signal Processor.
      5 *
      6 * Copyright (C) 2012, Linaro, Sangwook Lee <sangwook.lee@linaro.org>
      7 * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee <suapapa@insignal.co.kr>
      8 *
      9 * Based on s5k6aa and noon010pc30 driver
     10 * Copyright (C) 2011, Samsung Electronics Co., Ltd.
     11 */
     12
     13#include <linux/clk.h>
     14#include <linux/crc32.h>
     15#include <linux/ctype.h>
     16#include <linux/delay.h>
     17#include <linux/firmware.h>
     18#include <linux/gpio.h>
     19#include <linux/i2c.h>
     20#include <linux/module.h>
     21#include <linux/regulator/consumer.h>
     22#include <linux/slab.h>
     23#include <asm/unaligned.h>
     24
     25#include <media/media-entity.h>
     26#include <media/i2c/s5k4ecgx.h>
     27#include <media/v4l2-ctrls.h>
     28#include <media/v4l2-device.h>
     29#include <media/v4l2-mediabus.h>
     30#include <media/v4l2-subdev.h>
     31
     32static int debug;
     33module_param(debug, int, 0644);
     34
     35#define S5K4ECGX_DRIVER_NAME		"s5k4ecgx"
     36#define S5K4ECGX_FIRMWARE		"s5k4ecgx.bin"
     37
     38/* Firmware revision information */
     39#define REG_FW_REVISION			0x700001a6
     40#define REG_FW_VERSION			0x700001a4
     41#define S5K4ECGX_REVISION_1_1		0x11
     42#define S5K4ECGX_FW_VERSION		0x4ec0
     43
     44/* General purpose parameters */
     45#define REG_USER_BRIGHTNESS		0x7000022c
     46#define REG_USER_CONTRAST		0x7000022e
     47#define REG_USER_SATURATION		0x70000230
     48
     49#define REG_G_ENABLE_PREV		0x7000023e
     50#define REG_G_ENABLE_PREV_CHG		0x70000240
     51#define REG_G_NEW_CFG_SYNC		0x7000024a
     52#define REG_G_PREV_IN_WIDTH		0x70000250
     53#define REG_G_PREV_IN_HEIGHT		0x70000252
     54#define REG_G_PREV_IN_XOFFS		0x70000254
     55#define REG_G_PREV_IN_YOFFS		0x70000256
     56#define REG_G_CAP_IN_WIDTH		0x70000258
     57#define REG_G_CAP_IN_HEIGHT		0x7000025a
     58#define REG_G_CAP_IN_XOFFS		0x7000025c
     59#define REG_G_CAP_IN_YOFFS		0x7000025e
     60#define REG_G_INPUTS_CHANGE_REQ		0x70000262
     61#define REG_G_ACTIVE_PREV_CFG		0x70000266
     62#define REG_G_PREV_CFG_CHG		0x70000268
     63#define REG_G_PREV_OPEN_AFTER_CH	0x7000026a
     64
     65/* Preview context register sets. n = 0...4. */
     66#define PREG(n, x)			((n) * 0x30 + (x))
     67#define REG_P_OUT_WIDTH(n)		PREG(n, 0x700002a6)
     68#define REG_P_OUT_HEIGHT(n)		PREG(n, 0x700002a8)
     69#define REG_P_FMT(n)			PREG(n, 0x700002aa)
     70#define REG_P_PVI_MASK(n)		PREG(n, 0x700002b4)
     71#define REG_P_FR_TIME_TYPE(n)		PREG(n, 0x700002be)
     72#define  FR_TIME_DYNAMIC		0
     73#define  FR_TIME_FIXED			1
     74#define  FR_TIME_FIXED_ACCURATE		2
     75#define REG_P_FR_TIME_Q_TYPE(n)		PREG(n, 0x700002c0)
     76#define  FR_TIME_Q_DYNAMIC		0
     77#define  FR_TIME_Q_BEST_FRRATE		1
     78#define  FR_TIME_Q_BEST_QUALITY		2
     79
     80/* Frame period in 0.1 ms units */
     81#define REG_P_MAX_FR_TIME(n)		PREG(n, 0x700002c2)
     82#define REG_P_MIN_FR_TIME(n)		PREG(n, 0x700002c4)
     83#define  US_TO_FR_TIME(__t)		((__t) / 100)
     84#define REG_P_PREV_MIRROR(n)		PREG(n, 0x700002d0)
     85#define REG_P_CAP_MIRROR(n)		PREG(n, 0x700002d2)
     86
     87#define REG_G_PREVZOOM_IN_WIDTH		0x70000494
     88#define REG_G_PREVZOOM_IN_HEIGHT	0x70000496
     89#define REG_G_PREVZOOM_IN_XOFFS		0x70000498
     90#define REG_G_PREVZOOM_IN_YOFFS		0x7000049a
     91#define REG_G_CAPZOOM_IN_WIDTH		0x7000049c
     92#define REG_G_CAPZOOM_IN_HEIGHT		0x7000049e
     93#define REG_G_CAPZOOM_IN_XOFFS		0x700004a0
     94#define REG_G_CAPZOOM_IN_YOFFS		0x700004a2
     95
     96/* n = 0...4 */
     97#define REG_USER_SHARPNESS(n)		(0x70000a28 + (n) * 0xb6)
     98
     99/* Reduce sharpness range for user space API */
    100#define SHARPNESS_DIV			8208
    101#define TOK_TERM			0xffffffff
    102
    103/*
    104 * FIXME: This is copied from s5k6aa, because of no information
    105 * in the S5K4ECGX datasheet.
    106 * H/W register Interface (0xd0000000 - 0xd0000fff)
    107 */
    108#define AHB_MSB_ADDR_PTR		0xfcfc
    109#define GEN_REG_OFFSH			0xd000
    110#define REG_CMDWR_ADDRH			0x0028
    111#define REG_CMDWR_ADDRL			0x002a
    112#define REG_CMDRD_ADDRH			0x002c
    113#define REG_CMDRD_ADDRL			0x002e
    114#define REG_CMDBUF0_ADDR		0x0f12
    115
    116struct s5k4ecgx_frmsize {
    117	struct v4l2_frmsize_discrete size;
    118	/* Fixed sensor matrix crop rectangle */
    119	struct v4l2_rect input_window;
    120};
    121
    122struct regval_list {
    123	u32 addr;
    124	u16 val;
    125};
    126
    127/*
    128 * TODO: currently only preview is supported and snapshot (capture)
    129 * is not implemented yet
    130 */
    131static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = {
    132	{
    133		.size = { 176, 144 },
    134		.input_window = { 0x00, 0x00, 0x928, 0x780 },
    135	}, {
    136		.size = { 352, 288 },
    137		.input_window = { 0x00, 0x00, 0x928, 0x780 },
    138	}, {
    139		.size = { 640, 480 },
    140		.input_window = { 0x00, 0x00, 0xa00, 0x780 },
    141	}, {
    142		.size = { 720, 480 },
    143		.input_window = { 0x00, 0x00, 0xa00, 0x6a8 },
    144	}
    145};
    146
    147#define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes)
    148
    149struct s5k4ecgx_pixfmt {
    150	u32 code;
    151	u32 colorspace;
    152	/* REG_TC_PCFG_Format register value */
    153	u16 reg_p_format;
    154};
    155
    156/* By default value, output from sensor will be YUV422 0-255 */
    157static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = {
    158	{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 },
    159};
    160
    161static const char * const s5k4ecgx_supply_names[] = {
    162	/*
    163	 * Usually 2.8V is used for analog power (vdda)
    164	 * and digital IO (vddio, vdddcore)
    165	 */
    166	"vdda",
    167	"vddio",
    168	"vddcore",
    169	"vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */
    170};
    171
    172#define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names)
    173
    174enum s5k4ecgx_gpio_id {
    175	STBY,
    176	RSET,
    177	GPIO_NUM,
    178};
    179
    180struct s5k4ecgx {
    181	struct v4l2_subdev sd;
    182	struct media_pad pad;
    183	struct v4l2_ctrl_handler handler;
    184
    185	struct s5k4ecgx_platform_data *pdata;
    186	const struct s5k4ecgx_pixfmt *curr_pixfmt;
    187	const struct s5k4ecgx_frmsize *curr_frmsize;
    188	struct mutex lock;
    189	u8 streaming;
    190	u8 set_params;
    191
    192	struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES];
    193	struct s5k4ecgx_gpio gpio[GPIO_NUM];
    194};
    195
    196static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd)
    197{
    198	return container_of(sd, struct s5k4ecgx, sd);
    199}
    200
    201static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
    202{
    203	u8 wbuf[2] = { addr >> 8, addr & 0xff };
    204	struct i2c_msg msg[2];
    205	u8 rbuf[2];
    206	int ret;
    207
    208	msg[0].addr = client->addr;
    209	msg[0].flags = 0;
    210	msg[0].len = 2;
    211	msg[0].buf = wbuf;
    212
    213	msg[1].addr = client->addr;
    214	msg[1].flags = I2C_M_RD;
    215	msg[1].len = 2;
    216	msg[1].buf = rbuf;
    217
    218	ret = i2c_transfer(client->adapter, msg, 2);
    219	*val = be16_to_cpu(*((__be16 *)rbuf));
    220
    221	v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
    222
    223	return ret == 2 ? 0 : ret;
    224}
    225
    226static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val)
    227{
    228	u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff };
    229
    230	int ret = i2c_master_send(client, buf, 4);
    231	v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val);
    232
    233	return ret == 4 ? 0 : ret;
    234}
    235
    236static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val)
    237{
    238	u16 high = addr >> 16, low = addr & 0xffff;
    239	int ret;
    240
    241	v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val);
    242
    243	ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high);
    244	if (!ret)
    245		ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low);
    246	if (!ret)
    247		ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
    248
    249	return ret;
    250}
    251
    252static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val)
    253{
    254	u16 high = addr >> 16, low =  addr & 0xffff;
    255	int ret;
    256
    257	ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high);
    258	if (!ret)
    259		ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low);
    260	if (!ret)
    261		ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val);
    262
    263	return ret;
    264}
    265
    266static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd)
    267{
    268	struct i2c_client *client = v4l2_get_subdevdata(sd);
    269	u16 hw_rev, fw_ver = 0;
    270	int ret;
    271
    272	ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver);
    273	if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) {
    274		v4l2_err(sd, "FW version check failed!\n");
    275		return -ENODEV;
    276	}
    277
    278	ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev);
    279	if (ret < 0)
    280		return ret;
    281
    282	v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n",
    283						fw_ver, hw_rev);
    284	return 0;
    285}
    286
    287static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd)
    288{
    289	struct i2c_client *client = v4l2_get_subdevdata(sd);
    290	int ret;
    291
    292	/* Set APB peripherals start address */
    293	ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
    294	if (ret < 0)
    295		return ret;
    296	/*
    297	 * FIXME: This is copied from s5k6aa, because of no information
    298	 * in s5k4ecgx's datasheet.
    299	 * sw_reset is activated to put device into idle status
    300	 */
    301	ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001);
    302	if (ret < 0)
    303		return ret;
    304
    305	ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000);
    306	if (ret < 0)
    307		return ret;
    308	/* Halt ARM CPU */
    309	return s5k4ecgx_i2c_write(client, 0x0014, 0x0001);
    310}
    311
    312#define FW_CRC_SIZE	4
    313/* Register address, value are 4, 2 bytes */
    314#define FW_RECORD_SIZE	6
    315/*
    316 * The firmware has following format:
    317 * < total number of records (4 bytes + 2 bytes padding) N >,
    318 * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >,
    319 * where "record" is a 4-byte register address followed by 2-byte
    320 * register value (little endian).
    321 * The firmware generator can be found in following git repository:
    322 * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git
    323 */
    324static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
    325{
    326	struct i2c_client *client = v4l2_get_subdevdata(sd);
    327	const struct firmware *fw;
    328	const u8 *ptr;
    329	int err, i, regs_num;
    330	u32 addr, crc, crc_file, addr_inc = 0;
    331	u16 val;
    332
    333	err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev);
    334	if (err) {
    335		v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE);
    336		return err;
    337	}
    338	regs_num = get_unaligned_le32(fw->data);
    339
    340	v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n",
    341		 S5K4ECGX_FIRMWARE, fw->size, regs_num);
    342
    343	regs_num++; /* Add header */
    344	if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) {
    345		err = -EINVAL;
    346		goto fw_out;
    347	}
    348	crc_file = get_unaligned_le32(fw->data + regs_num * FW_RECORD_SIZE);
    349	crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE);
    350	if (crc != crc_file) {
    351		v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file);
    352		err = -EINVAL;
    353		goto fw_out;
    354	}
    355	ptr = fw->data + FW_RECORD_SIZE;
    356	for (i = 1; i < regs_num; i++) {
    357		addr = get_unaligned_le32(ptr);
    358		ptr += sizeof(u32);
    359		val = get_unaligned_le16(ptr);
    360		ptr += sizeof(u16);
    361		if (addr - addr_inc != 2)
    362			err = s5k4ecgx_write(client, addr, val);
    363		else
    364			err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
    365		if (err)
    366			break;
    367		addr_inc = addr;
    368	}
    369fw_out:
    370	release_firmware(fw);
    371	return err;
    372}
    373
    374/* Set preview and capture input window */
    375static int s5k4ecgx_set_input_window(struct i2c_client *c,
    376				     const struct v4l2_rect *r)
    377{
    378	int ret;
    379
    380	ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width);
    381	if (!ret)
    382		ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height);
    383	if (!ret)
    384		ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left);
    385	if (!ret)
    386		ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top);
    387	if (!ret)
    388		ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width);
    389	if (!ret)
    390		ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height);
    391	if (!ret)
    392		ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left);
    393	if (!ret)
    394		ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top);
    395
    396	return ret;
    397}
    398
    399/* Set preview and capture zoom input window */
    400static int s5k4ecgx_set_zoom_window(struct i2c_client *c,
    401				    const struct v4l2_rect *r)
    402{
    403	int ret;
    404
    405	ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
    406	if (!ret)
    407		ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
    408	if (!ret)
    409		ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
    410	if (!ret)
    411		ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
    412	if (!ret)
    413		ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width);
    414	if (!ret)
    415		ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height);
    416	if (!ret)
    417		ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left);
    418	if (!ret)
    419		ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top);
    420
    421	return ret;
    422}
    423
    424static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv)
    425{
    426	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
    427	int ret;
    428
    429	ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0),
    430			     priv->curr_frmsize->size.width);
    431	if (!ret)
    432		ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0),
    433				     priv->curr_frmsize->size.height);
    434	if (!ret)
    435		ret = s5k4ecgx_write(client, REG_P_FMT(0),
    436				     priv->curr_pixfmt->reg_p_format);
    437	return ret;
    438}
    439
    440static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd)
    441{
    442	int ret;
    443
    444	ret = s5k4ecgx_set_ahb_address(sd);
    445
    446	/* The delay is from manufacturer's settings */
    447	msleep(100);
    448
    449	if (!ret)
    450		ret = s5k4ecgx_load_firmware(sd);
    451	if (ret)
    452		v4l2_err(sd, "Failed to write initial settings\n");
    453
    454	return ret;
    455}
    456
    457static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val)
    458{
    459	if (!gpio_is_valid(priv->gpio[id].gpio))
    460		return 0;
    461	gpio_set_value(priv->gpio[id].gpio, val);
    462
    463	return 1;
    464}
    465
    466static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
    467{
    468	int ret;
    469
    470	ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
    471	if (ret)
    472		return ret;
    473	usleep_range(30, 50);
    474
    475	/* The polarity of STBY is controlled by TSP */
    476	if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
    477		usleep_range(30, 50);
    478
    479	if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level))
    480		usleep_range(30, 50);
    481
    482	return 0;
    483}
    484
    485static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
    486{
    487	if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level))
    488		usleep_range(30, 50);
    489
    490	if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
    491		usleep_range(30, 50);
    492
    493	priv->streaming = 0;
    494
    495	return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
    496}
    497
    498/* Find nearest matching image pixel size. */
    499static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf,
    500				  const struct s5k4ecgx_frmsize **size)
    501{
    502	unsigned int min_err = ~0;
    503	int i = ARRAY_SIZE(s5k4ecgx_prev_sizes);
    504	const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0],
    505		*match = NULL;
    506
    507	while (i--) {
    508		int err = abs(fsize->size.width - mf->width)
    509				+ abs(fsize->size.height - mf->height);
    510		if (err < min_err) {
    511			min_err = err;
    512			match = fsize;
    513		}
    514		fsize++;
    515	}
    516	if (match) {
    517		mf->width  = match->size.width;
    518		mf->height = match->size.height;
    519		if (size)
    520			*size = match;
    521		return 0;
    522	}
    523
    524	return -EINVAL;
    525}
    526
    527static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd,
    528				   struct v4l2_subdev_state *sd_state,
    529				   struct v4l2_subdev_mbus_code_enum *code)
    530{
    531	if (code->index >= ARRAY_SIZE(s5k4ecgx_formats))
    532		return -EINVAL;
    533	code->code = s5k4ecgx_formats[code->index].code;
    534
    535	return 0;
    536}
    537
    538static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd,
    539			    struct v4l2_subdev_state *sd_state,
    540			    struct v4l2_subdev_format *fmt)
    541{
    542	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
    543	struct v4l2_mbus_framefmt *mf;
    544
    545	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
    546		if (sd_state) {
    547			mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
    548			fmt->format = *mf;
    549		}
    550		return 0;
    551	}
    552
    553	mf = &fmt->format;
    554
    555	mutex_lock(&priv->lock);
    556	mf->width = priv->curr_frmsize->size.width;
    557	mf->height = priv->curr_frmsize->size.height;
    558	mf->code = priv->curr_pixfmt->code;
    559	mf->colorspace = priv->curr_pixfmt->colorspace;
    560	mf->field = V4L2_FIELD_NONE;
    561	mutex_unlock(&priv->lock);
    562
    563	return 0;
    564}
    565
    566static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd,
    567					    struct v4l2_mbus_framefmt *mf)
    568{
    569	int i = ARRAY_SIZE(s5k4ecgx_formats);
    570
    571	while (--i)
    572		if (mf->code == s5k4ecgx_formats[i].code)
    573			break;
    574	mf->code = s5k4ecgx_formats[i].code;
    575
    576	return &s5k4ecgx_formats[i];
    577}
    578
    579static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd,
    580			    struct v4l2_subdev_state *sd_state,
    581			    struct v4l2_subdev_format *fmt)
    582{
    583	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
    584	const struct s5k4ecgx_frmsize *fsize = NULL;
    585	const struct s5k4ecgx_pixfmt *pf;
    586	struct v4l2_mbus_framefmt *mf;
    587	int ret = 0;
    588
    589	pf = s5k4ecgx_try_fmt(sd, &fmt->format);
    590	s5k4ecgx_try_frame_size(&fmt->format, &fsize);
    591	fmt->format.colorspace = V4L2_COLORSPACE_JPEG;
    592	fmt->format.field = V4L2_FIELD_NONE;
    593
    594	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
    595		if (sd_state) {
    596			mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
    597			*mf = fmt->format;
    598		}
    599		return 0;
    600	}
    601
    602	mutex_lock(&priv->lock);
    603	if (!priv->streaming) {
    604		priv->curr_frmsize = fsize;
    605		priv->curr_pixfmt = pf;
    606		priv->set_params = 1;
    607	} else {
    608		ret = -EBUSY;
    609	}
    610	mutex_unlock(&priv->lock);
    611
    612	return ret;
    613}
    614
    615static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = {
    616	.enum_mbus_code	= s5k4ecgx_enum_mbus_code,
    617	.get_fmt	= s5k4ecgx_get_fmt,
    618	.set_fmt	= s5k4ecgx_set_fmt,
    619};
    620
    621/*
    622 * V4L2 subdev controls
    623 */
    624static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl)
    625{
    626	struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx,
    627						handler)->sd;
    628	struct i2c_client *client = v4l2_get_subdevdata(sd);
    629	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
    630	unsigned int i;
    631	int err = 0;
    632
    633	v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
    634
    635	mutex_lock(&priv->lock);
    636	switch (ctrl->id) {
    637	case V4L2_CID_CONTRAST:
    638		err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val);
    639		break;
    640
    641	case V4L2_CID_SATURATION:
    642		err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val);
    643		break;
    644
    645	case V4L2_CID_SHARPNESS:
    646		/* TODO: Revisit, is this setting for all presets ? */
    647		for (i = 0; i < 4 && !err; i++)
    648			err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i),
    649					     ctrl->val * SHARPNESS_DIV);
    650		break;
    651
    652	case V4L2_CID_BRIGHTNESS:
    653		err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val);
    654		break;
    655	}
    656	mutex_unlock(&priv->lock);
    657	if (err < 0)
    658		v4l2_err(sd, "Failed to write s_ctrl err %d\n", err);
    659
    660	return err;
    661}
    662
    663static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = {
    664	.s_ctrl = s5k4ecgx_s_ctrl,
    665};
    666
    667/*
    668 * Reading s5k4ecgx version information
    669 */
    670static int s5k4ecgx_registered(struct v4l2_subdev *sd)
    671{
    672	int ret;
    673	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
    674
    675	mutex_lock(&priv->lock);
    676	ret = __s5k4ecgx_power_on(priv);
    677	if (!ret) {
    678		ret = s5k4ecgx_read_fw_ver(sd);
    679		__s5k4ecgx_power_off(priv);
    680	}
    681	mutex_unlock(&priv->lock);
    682
    683	return ret;
    684}
    685
    686/*
    687 * V4L2 subdev internal operations
    688 */
    689static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
    690{
    691	struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd,
    692								   fh->state,
    693								   0);
    694
    695	mf->width = s5k4ecgx_prev_sizes[0].size.width;
    696	mf->height = s5k4ecgx_prev_sizes[0].size.height;
    697	mf->code = s5k4ecgx_formats[0].code;
    698	mf->colorspace = V4L2_COLORSPACE_JPEG;
    699	mf->field = V4L2_FIELD_NONE;
    700
    701	return 0;
    702}
    703
    704static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = {
    705	.registered = s5k4ecgx_registered,
    706	.open = s5k4ecgx_open,
    707};
    708
    709static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on)
    710{
    711	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
    712	int ret;
    713
    714	v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off");
    715
    716	if (on) {
    717		ret = __s5k4ecgx_power_on(priv);
    718		if (ret < 0)
    719			return ret;
    720		/* Time to stabilize sensor */
    721		msleep(100);
    722		ret = s5k4ecgx_init_sensor(sd);
    723		if (ret < 0)
    724			__s5k4ecgx_power_off(priv);
    725		else
    726			priv->set_params = 1;
    727	} else {
    728		ret = __s5k4ecgx_power_off(priv);
    729	}
    730
    731	return ret;
    732}
    733
    734static int s5k4ecgx_log_status(struct v4l2_subdev *sd)
    735{
    736	v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
    737
    738	return 0;
    739}
    740
    741static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = {
    742	.s_power	= s5k4ecgx_s_power,
    743	.log_status	= s5k4ecgx_log_status,
    744};
    745
    746static int __s5k4ecgx_s_params(struct s5k4ecgx *priv)
    747{
    748	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
    749	const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window;
    750	int ret;
    751
    752	ret = s5k4ecgx_set_input_window(client, crop_rect);
    753	if (!ret)
    754		ret = s5k4ecgx_set_zoom_window(client, crop_rect);
    755	if (!ret)
    756		ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1);
    757	if (!ret)
    758		ret = s5k4ecgx_write(client, 0x70000a1e, 0x28);
    759	if (!ret)
    760		ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c);
    761	if (!ret)
    762		ret = s5k4ecgx_set_output_framefmt(priv);
    763	if (!ret)
    764		ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52);
    765	if (!ret)
    766		ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0),
    767				     FR_TIME_DYNAMIC);
    768	if (!ret)
    769		ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0),
    770				     FR_TIME_Q_BEST_FRRATE);
    771	if (!ret)
    772		ret = s5k4ecgx_write(client,  REG_P_MIN_FR_TIME(0),
    773				     US_TO_FR_TIME(33300));
    774	if (!ret)
    775		ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0),
    776				     US_TO_FR_TIME(66600));
    777	if (!ret)
    778		ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0);
    779	if (!ret)
    780		ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0);
    781	if (!ret)
    782		ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0);
    783	if (!ret)
    784		ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1);
    785	if (!ret)
    786		ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1);
    787	if (!ret)
    788		ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1);
    789
    790	return ret;
    791}
    792
    793static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on)
    794{
    795	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
    796	int ret;
    797
    798	if (on && priv->set_params) {
    799		ret = __s5k4ecgx_s_params(priv);
    800		if (ret < 0)
    801			return ret;
    802		priv->set_params = 0;
    803	}
    804	/*
    805	 * This enables/disables preview stream only. Capture requests
    806	 * are not supported yet.
    807	 */
    808	ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on);
    809	if (ret < 0)
    810		return ret;
    811	return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1);
    812}
    813
    814static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on)
    815{
    816	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
    817	int ret = 0;
    818
    819	v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off");
    820
    821	mutex_lock(&priv->lock);
    822
    823	if (priv->streaming == !on) {
    824		ret = __s5k4ecgx_s_stream(priv, on);
    825		if (!ret)
    826			priv->streaming = on & 1;
    827	}
    828
    829	mutex_unlock(&priv->lock);
    830	return ret;
    831}
    832
    833static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = {
    834	.s_stream = s5k4ecgx_s_stream,
    835};
    836
    837static const struct v4l2_subdev_ops s5k4ecgx_ops = {
    838	.core = &s5k4ecgx_core_ops,
    839	.pad = &s5k4ecgx_pad_ops,
    840	.video = &s5k4ecgx_video_ops,
    841};
    842
    843/*
    844 * GPIO setup
    845 */
    846static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
    847{
    848	unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
    849	int ret;
    850
    851	if (!gpio_is_valid(nr))
    852		return 0;
    853	ret = gpio_request_one(nr, flags, name);
    854	if (!ret)
    855		gpio_export(nr, 0);
    856
    857	return ret;
    858}
    859
    860static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv)
    861{
    862	int i;
    863
    864	for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) {
    865		if (!gpio_is_valid(priv->gpio[i].gpio))
    866			continue;
    867		gpio_free(priv->gpio[i].gpio);
    868		priv->gpio[i].gpio = -EINVAL;
    869	}
    870}
    871
    872static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
    873				  const struct s5k4ecgx_platform_data *pdata)
    874{
    875	const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby;
    876	int ret;
    877
    878	priv->gpio[STBY].gpio = -EINVAL;
    879	priv->gpio[RSET].gpio  = -EINVAL;
    880
    881	ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
    882
    883	if (ret) {
    884		s5k4ecgx_free_gpios(priv);
    885		return ret;
    886	}
    887	priv->gpio[STBY] = *gpio;
    888	if (gpio_is_valid(gpio->gpio))
    889		gpio_set_value(gpio->gpio, 0);
    890
    891	gpio = &pdata->gpio_reset;
    892
    893	ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST");
    894	if (ret) {
    895		s5k4ecgx_free_gpios(priv);
    896		return ret;
    897	}
    898	priv->gpio[RSET] = *gpio;
    899	if (gpio_is_valid(gpio->gpio))
    900		gpio_set_value(gpio->gpio, 0);
    901
    902	return 0;
    903}
    904
    905static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv)
    906{
    907	const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops;
    908	struct v4l2_ctrl_handler *hdl = &priv->handler;
    909	int ret;
    910
    911	ret = v4l2_ctrl_handler_init(hdl, 4);
    912	if (ret)
    913		return ret;
    914
    915	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0);
    916	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
    917	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
    918
    919	/* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */
    920	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV,
    921			  24612/SHARPNESS_DIV, 1, 2);
    922	if (hdl->error) {
    923		ret = hdl->error;
    924		v4l2_ctrl_handler_free(hdl);
    925		return ret;
    926	}
    927	priv->sd.ctrl_handler = hdl;
    928
    929	return 0;
    930};
    931
    932static int s5k4ecgx_probe(struct i2c_client *client,
    933			  const struct i2c_device_id *id)
    934{
    935	struct s5k4ecgx_platform_data *pdata = client->dev.platform_data;
    936	struct v4l2_subdev *sd;
    937	struct s5k4ecgx *priv;
    938	int ret, i;
    939
    940	if (pdata == NULL) {
    941		dev_err(&client->dev, "platform data is missing!\n");
    942		return -EINVAL;
    943	}
    944
    945	priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL);
    946	if (!priv)
    947		return -ENOMEM;
    948
    949	mutex_init(&priv->lock);
    950	priv->streaming = 0;
    951
    952	sd = &priv->sd;
    953	/* Registering subdev */
    954	v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops);
    955	/* Static name; NEVER use in new drivers! */
    956	strscpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name));
    957
    958	sd->internal_ops = &s5k4ecgx_subdev_internal_ops;
    959	/* Support v4l2 sub-device user space API */
    960	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
    961
    962	priv->pad.flags = MEDIA_PAD_FL_SOURCE;
    963	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
    964	ret = media_entity_pads_init(&sd->entity, 1, &priv->pad);
    965	if (ret)
    966		return ret;
    967
    968	ret = s5k4ecgx_config_gpios(priv, pdata);
    969	if (ret) {
    970		dev_err(&client->dev, "Failed to set gpios\n");
    971		goto out_err1;
    972	}
    973	for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++)
    974		priv->supplies[i].supply = s5k4ecgx_supply_names[i];
    975
    976	ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES,
    977				 priv->supplies);
    978	if (ret) {
    979		dev_err(&client->dev, "Failed to get regulators\n");
    980		goto out_err2;
    981	}
    982	ret = s5k4ecgx_init_v4l2_ctrls(priv);
    983	if (ret)
    984		goto out_err2;
    985
    986	priv->curr_pixfmt = &s5k4ecgx_formats[0];
    987	priv->curr_frmsize = &s5k4ecgx_prev_sizes[0];
    988
    989	return 0;
    990
    991out_err2:
    992	s5k4ecgx_free_gpios(priv);
    993out_err1:
    994	media_entity_cleanup(&priv->sd.entity);
    995
    996	return ret;
    997}
    998
    999static int s5k4ecgx_remove(struct i2c_client *client)
   1000{
   1001	struct v4l2_subdev *sd = i2c_get_clientdata(client);
   1002	struct s5k4ecgx *priv = to_s5k4ecgx(sd);
   1003
   1004	mutex_destroy(&priv->lock);
   1005	s5k4ecgx_free_gpios(priv);
   1006	v4l2_device_unregister_subdev(sd);
   1007	v4l2_ctrl_handler_free(&priv->handler);
   1008	media_entity_cleanup(&sd->entity);
   1009
   1010	return 0;
   1011}
   1012
   1013static const struct i2c_device_id s5k4ecgx_id[] = {
   1014	{ S5K4ECGX_DRIVER_NAME, 0 },
   1015	{}
   1016};
   1017MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id);
   1018
   1019static struct i2c_driver v4l2_i2c_driver = {
   1020	.driver = {
   1021		.name = S5K4ECGX_DRIVER_NAME,
   1022	},
   1023	.probe = s5k4ecgx_probe,
   1024	.remove = s5k4ecgx_remove,
   1025	.id_table = s5k4ecgx_id,
   1026};
   1027
   1028module_i2c_driver(v4l2_i2c_driver);
   1029
   1030MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera");
   1031MODULE_AUTHOR("Sangwook Lee <sangwook.lee@linaro.org>");
   1032MODULE_AUTHOR("Seok-Young Jang <quartz.jang@samsung.com>");
   1033MODULE_LICENSE("GPL");
   1034MODULE_FIRMWARE(S5K4ECGX_FIRMWARE);