cx18-av-firmware.c (6555B)
1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * cx18 ADEC firmware functions 4 * 5 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> 6 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net> 7 */ 8 9#include "cx18-driver.h" 10#include "cx18-io.h" 11#include <linux/firmware.h> 12 13#define CX18_AUDIO_ENABLE 0xc72014 14#define CX18_AI1_MUX_MASK 0x30 15#define CX18_AI1_MUX_I2S1 0x00 16#define CX18_AI1_MUX_I2S2 0x10 17#define CX18_AI1_MUX_843_I2S 0x20 18#define CX18_AI1_MUX_INVALID 0x30 19 20#define FWFILE "v4l-cx23418-dig.fw" 21 22static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw) 23{ 24 struct v4l2_subdev *sd = &cx->av_state.sd; 25 int ret = 0; 26 const u8 *data; 27 u32 size; 28 int addr; 29 u32 expected, dl_control; 30 31 /* Ensure we put the 8051 in reset and enable firmware upload mode */ 32 dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); 33 do { 34 dl_control &= 0x00ffffff; 35 dl_control |= 0x0f000000; 36 cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control); 37 dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); 38 } while ((dl_control & 0xff000000) != 0x0f000000); 39 40 /* Read and auto increment until at address 0x0000 */ 41 while (dl_control & 0x3fff) 42 dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); 43 44 data = fw->data; 45 size = fw->size; 46 for (addr = 0; addr < size; addr++) { 47 dl_control &= 0xffff3fff; /* ignore top 2 bits of address */ 48 expected = 0x0f000000 | ((u32)data[addr] << 16) | addr; 49 if (expected != dl_control) { 50 CX18_ERR_DEV(sd, "verification of %s firmware load failed: expected %#010x got %#010x\n", 51 FWFILE, expected, dl_control); 52 ret = -EIO; 53 break; 54 } 55 dl_control = cx18_av_read4(cx, CXADEC_DL_CTL); 56 } 57 if (ret == 0) 58 CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n", 59 FWFILE, size); 60 return ret; 61} 62 63int cx18_av_loadfw(struct cx18 *cx) 64{ 65 struct v4l2_subdev *sd = &cx->av_state.sd; 66 const struct firmware *fw = NULL; 67 u32 size; 68 u32 u, v; 69 const u8 *ptr; 70 int i; 71 int retries1 = 0; 72 73 if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) { 74 CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE); 75 return -EINVAL; 76 } 77 78 /* The firmware load often has byte errors, so allow for several 79 retries, both at byte level and at the firmware load level. */ 80 while (retries1 < 5) { 81 cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000, 82 0x00008430, 0xffffffff); /* cx25843 */ 83 cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff); 84 85 /* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */ 86 cx18_av_write4_expect(cx, 0x8100, 0x00010000, 87 0x00008430, 0xffffffff); /* cx25843 */ 88 89 /* Put the 8051 in reset and enable firmware upload */ 90 cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000); 91 92 ptr = fw->data; 93 size = fw->size; 94 95 for (i = 0; i < size; i++) { 96 u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16); 97 u32 value = 0; 98 int retries2; 99 int unrec_err = 0; 100 101 for (retries2 = 0; retries2 < CX18_MAX_MMIO_WR_RETRIES; 102 retries2++) { 103 cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 104 dl_control); 105 udelay(10); 106 value = cx18_av_read4(cx, CXADEC_DL_CTL); 107 if (value == dl_control) 108 break; 109 /* Check if we can correct the byte by changing 110 the address. We can only write the lower 111 address byte of the address. */ 112 if ((value & 0x3F00) != (dl_control & 0x3F00)) { 113 unrec_err = 1; 114 break; 115 } 116 } 117 if (unrec_err || retries2 >= CX18_MAX_MMIO_WR_RETRIES) 118 break; 119 } 120 if (i == size) 121 break; 122 retries1++; 123 } 124 if (retries1 >= 5) { 125 CX18_ERR_DEV(sd, "unable to load firmware %s\n", FWFILE); 126 release_firmware(fw); 127 return -EIO; 128 } 129 130 cx18_av_write4_expect(cx, CXADEC_DL_CTL, 131 0x03000000 | fw->size, 0x03000000, 0x13000000); 132 133 CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size); 134 135 if (cx18_av_verifyfw(cx, fw) == 0) 136 cx18_av_write4_expect(cx, CXADEC_DL_CTL, 137 0x13000000 | fw->size, 0x13000000, 0x13000000); 138 139 /* Output to the 416 */ 140 cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000); 141 142 /* Audio input control 1 set to Sony mode */ 143 /* Audio output input 2 is 0 for slave operation input */ 144 /* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */ 145 /* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge 146 after WS transition for first bit of audio word. */ 147 cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0); 148 149 /* Audio output control 1 is set to Sony mode */ 150 /* Audio output control 2 is set to 1 for master mode */ 151 /* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */ 152 /* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge 153 after WS transition for first bit of audio word. */ 154 /* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT 155 are generated) */ 156 cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0); 157 158 /* set alt I2s master clock to /0x16 and enable alt divider i2s 159 passthrough */ 160 cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5600B687); 161 162 cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6, 163 0x3F00FFFF); 164 /* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */ 165 166 /* Set bit 0 in register 0x9CC to signify that this is MiniMe. */ 167 /* Register 0x09CC is defined by the Merlin firmware, and doesn't 168 have a name in the spec. */ 169 cx18_av_write4(cx, 0x09CC, 1); 170 171 v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); 172 /* If bit 11 is 1, clear bit 10 */ 173 if (v & 0x800) 174 cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE, 175 0, 0x400); 176 177 /* Toggle the AI1 MUX */ 178 v = cx18_read_reg(cx, CX18_AUDIO_ENABLE); 179 u = v & CX18_AI1_MUX_MASK; 180 v &= ~CX18_AI1_MUX_MASK; 181 if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) { 182 /* Switch to I2S1 */ 183 v |= CX18_AI1_MUX_I2S1; 184 cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, 185 v, CX18_AI1_MUX_MASK); 186 /* Switch back to the A/V decoder core I2S output */ 187 v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S; 188 } else { 189 /* Switch to the A/V decoder core I2S output */ 190 v |= CX18_AI1_MUX_843_I2S; 191 cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, 192 v, CX18_AI1_MUX_MASK); 193 /* Switch back to I2S1 or I2S2 */ 194 v = (v & ~CX18_AI1_MUX_MASK) | u; 195 } 196 cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE, 197 v, CX18_AI1_MUX_MASK); 198 199 /* Enable WW auto audio standard detection */ 200 v = cx18_av_read4(cx, CXADEC_STD_DET_CTL); 201 v |= 0xFF; /* Auto by default */ 202 v |= 0x400; /* Stereo by default */ 203 v |= 0x14000000; 204 cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF); 205 206 release_firmware(fw); 207 return 0; 208} 209 210MODULE_FIRMWARE(FWFILE);