cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

pluto2.c (19086B)


      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
      4 *
      5 * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
      6 *
      7 * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
      8 *	by Dany Salman <salmandany@yahoo.fr>
      9 *	Copyright (c) 2004 TDF
     10 */
     11
     12#include <linux/i2c.h>
     13#include <linux/i2c-algo-bit.h>
     14#include <linux/init.h>
     15#include <linux/interrupt.h>
     16#include <linux/kernel.h>
     17#include <linux/module.h>
     18#include <linux/pci.h>
     19#include <linux/dma-mapping.h>
     20#include <linux/slab.h>
     21
     22#include <media/demux.h>
     23#include <media/dmxdev.h>
     24#include <media/dvb_demux.h>
     25#include <media/dvb_frontend.h>
     26#include <media/dvb_net.h>
     27#include <media/dvbdev.h>
     28#include "tda1004x.h"
     29
     30DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
     31
     32#define DRIVER_NAME		"pluto2"
     33
     34#define REG_PIDn(n)		((n) << 2)	/* PID n pattern registers */
     35#define REG_PCAR		0x0020		/* PC address register */
     36#define REG_TSCR		0x0024		/* TS ctrl & status */
     37#define REG_MISC		0x0028		/* miscellaneous */
     38#define REG_MMAC		0x002c		/* MSB MAC address */
     39#define REG_IMAC		0x0030		/* ISB MAC address */
     40#define REG_LMAC		0x0034		/* LSB MAC address */
     41#define REG_SPID		0x0038		/* SPI data */
     42#define REG_SLCS		0x003c		/* serial links ctrl/status */
     43
     44#define PID0_NOFIL		(0x0001 << 16)
     45#define PIDn_ENP		(0x0001 << 15)
     46#define PID0_END		(0x0001 << 14)
     47#define PID0_AFIL		(0x0001 << 13)
     48#define PIDn_PID		(0x1fff <<  0)
     49
     50#define TSCR_NBPACKETS		(0x00ff << 24)
     51#define TSCR_DEM		(0x0001 << 17)
     52#define TSCR_DE			(0x0001 << 16)
     53#define TSCR_RSTN		(0x0001 << 15)
     54#define TSCR_MSKO		(0x0001 << 14)
     55#define TSCR_MSKA		(0x0001 << 13)
     56#define TSCR_MSKL		(0x0001 << 12)
     57#define TSCR_OVR		(0x0001 << 11)
     58#define TSCR_AFUL		(0x0001 << 10)
     59#define TSCR_LOCK		(0x0001 <<  9)
     60#define TSCR_IACK		(0x0001 <<  8)
     61#define TSCR_ADEF		(0x007f <<  0)
     62
     63#define MISC_DVR		(0x0fff <<  4)
     64#define MISC_ALED		(0x0001 <<  3)
     65#define MISC_FRST		(0x0001 <<  2)
     66#define MISC_LED1		(0x0001 <<  1)
     67#define MISC_LED0		(0x0001 <<  0)
     68
     69#define SPID_SPIDR		(0x00ff <<  0)
     70
     71#define SLCS_SCL		(0x0001 <<  7)
     72#define SLCS_SDA		(0x0001 <<  6)
     73#define SLCS_CSN		(0x0001 <<  2)
     74#define SLCS_OVR		(0x0001 <<  1)
     75#define SLCS_SWC		(0x0001 <<  0)
     76
     77#define TS_DMA_PACKETS		(8)
     78#define TS_DMA_BYTES		(188 * TS_DMA_PACKETS)
     79
     80#define I2C_ADDR_TDA10046	0x10
     81#define I2C_ADDR_TUA6034	0xc2
     82#define NHWFILTERS		8
     83
     84struct pluto {
     85	/* pci */
     86	struct pci_dev *pdev;
     87	u8 __iomem *io_mem;
     88
     89	/* dvb */
     90	struct dmx_frontend hw_frontend;
     91	struct dmx_frontend mem_frontend;
     92	struct dmxdev dmxdev;
     93	struct dvb_adapter dvb_adapter;
     94	struct dvb_demux demux;
     95	struct dvb_frontend *fe;
     96	struct dvb_net dvbnet;
     97	unsigned int full_ts_users;
     98	unsigned int users;
     99
    100	/* i2c */
    101	struct i2c_algo_bit_data i2c_bit;
    102	struct i2c_adapter i2c_adap;
    103	unsigned int i2cbug;
    104
    105	/* irq */
    106	unsigned int overflow;
    107	unsigned int dead;
    108
    109	/* dma */
    110	dma_addr_t dma_addr;
    111	u8 dma_buf[TS_DMA_BYTES];
    112	u8 dummy[4096];
    113};
    114
    115static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
    116{
    117	return container_of(feed->demux, struct pluto, demux);
    118}
    119
    120static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
    121{
    122	return container_of(fe->dvb, struct pluto, dvb_adapter);
    123}
    124
    125static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
    126{
    127	return readl(&pluto->io_mem[reg]);
    128}
    129
    130static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
    131{
    132	writel(val, &pluto->io_mem[reg]);
    133}
    134
    135static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
    136{
    137	u32 val = readl(&pluto->io_mem[reg]);
    138	val &= ~mask;
    139	val |= bits;
    140	writel(val, &pluto->io_mem[reg]);
    141}
    142
    143static void pluto_write_tscr(struct pluto *pluto, u32 val)
    144{
    145	/* set the number of packets */
    146	val &= ~TSCR_ADEF;
    147	val |= TS_DMA_PACKETS / 2;
    148
    149	pluto_writereg(pluto, REG_TSCR, val);
    150}
    151
    152static void pluto_setsda(void *data, int state)
    153{
    154	struct pluto *pluto = data;
    155
    156	if (state)
    157		pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
    158	else
    159		pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
    160}
    161
    162static void pluto_setscl(void *data, int state)
    163{
    164	struct pluto *pluto = data;
    165
    166	if (state)
    167		pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
    168	else
    169		pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
    170
    171	/* try to detect i2c_inb() to workaround hardware bug:
    172	 * reset SDA to high after SCL has been set to low */
    173	if ((state) && (pluto->i2cbug == 0)) {
    174		pluto->i2cbug = 1;
    175	} else {
    176		if ((!state) && (pluto->i2cbug == 1))
    177			pluto_setsda(pluto, 1);
    178		pluto->i2cbug = 0;
    179	}
    180}
    181
    182static int pluto_getsda(void *data)
    183{
    184	struct pluto *pluto = data;
    185
    186	return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
    187}
    188
    189static int pluto_getscl(void *data)
    190{
    191	struct pluto *pluto = data;
    192
    193	return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
    194}
    195
    196static void pluto_reset_frontend(struct pluto *pluto, int reenable)
    197{
    198	u32 val = pluto_readreg(pluto, REG_MISC);
    199
    200	if (val & MISC_FRST) {
    201		val &= ~MISC_FRST;
    202		pluto_writereg(pluto, REG_MISC, val);
    203	}
    204	if (reenable) {
    205		val |= MISC_FRST;
    206		pluto_writereg(pluto, REG_MISC, val);
    207	}
    208}
    209
    210static void pluto_reset_ts(struct pluto *pluto, int reenable)
    211{
    212	u32 val = pluto_readreg(pluto, REG_TSCR);
    213
    214	if (val & TSCR_RSTN) {
    215		val &= ~TSCR_RSTN;
    216		pluto_write_tscr(pluto, val);
    217	}
    218	if (reenable) {
    219		val |= TSCR_RSTN;
    220		pluto_write_tscr(pluto, val);
    221	}
    222}
    223
    224static void pluto_set_dma_addr(struct pluto *pluto)
    225{
    226	pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
    227}
    228
    229static int pluto_dma_map(struct pluto *pluto)
    230{
    231	pluto->dma_addr = dma_map_single(&pluto->pdev->dev, pluto->dma_buf,
    232					 TS_DMA_BYTES, DMA_FROM_DEVICE);
    233
    234	return dma_mapping_error(&pluto->pdev->dev, pluto->dma_addr);
    235}
    236
    237static void pluto_dma_unmap(struct pluto *pluto)
    238{
    239	dma_unmap_single(&pluto->pdev->dev, pluto->dma_addr, TS_DMA_BYTES,
    240			 DMA_FROM_DEVICE);
    241}
    242
    243static int pluto_start_feed(struct dvb_demux_feed *f)
    244{
    245	struct pluto *pluto = feed_to_pluto(f);
    246
    247	/* enable PID filtering */
    248	if (pluto->users++ == 0)
    249		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
    250
    251	if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
    252		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
    253	else if (pluto->full_ts_users++ == 0)
    254		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
    255
    256	return 0;
    257}
    258
    259static int pluto_stop_feed(struct dvb_demux_feed *f)
    260{
    261	struct pluto *pluto = feed_to_pluto(f);
    262
    263	/* disable PID filtering */
    264	if (--pluto->users == 0)
    265		pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
    266
    267	if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
    268		pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
    269	else if (--pluto->full_ts_users == 0)
    270		pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
    271
    272	return 0;
    273}
    274
    275static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
    276{
    277	/* synchronize the DMA transfer with the CPU
    278	 * first so that we see updated contents. */
    279	dma_sync_single_for_cpu(&pluto->pdev->dev, pluto->dma_addr,
    280				TS_DMA_BYTES, DMA_FROM_DEVICE);
    281
    282	/* Workaround for broken hardware:
    283	 * [1] On startup NBPACKETS seems to contain an uninitialized value,
    284	 *     but no packets have been transferred.
    285	 * [2] Sometimes (actually very often) NBPACKETS stays at zero
    286	 *     although one packet has been transferred.
    287	 * [3] Sometimes (actually rarely), the card gets into an erroneous
    288	 *     mode where it continuously generates interrupts, claiming it
    289	 *     has received nbpackets>TS_DMA_PACKETS packets, but no packet
    290	 *     has been transferred. Only a reset seems to solve this
    291	 */
    292	if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
    293		unsigned int i = 0;
    294		while (pluto->dma_buf[i] == 0x47)
    295			i += 188;
    296		nbpackets = i / 188;
    297		if (i == 0) {
    298			pluto_reset_ts(pluto, 1);
    299			dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
    300		}
    301	}
    302
    303	dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
    304
    305	/* clear the dma buffer. this is needed to be able to identify
    306	 * new valid ts packets above */
    307	memset(pluto->dma_buf, 0, nbpackets * 188);
    308
    309	/* reset the dma address */
    310	pluto_set_dma_addr(pluto);
    311
    312	/* sync the buffer and give it back to the card */
    313	dma_sync_single_for_device(&pluto->pdev->dev, pluto->dma_addr,
    314				   TS_DMA_BYTES, DMA_FROM_DEVICE);
    315}
    316
    317static irqreturn_t pluto_irq(int irq, void *dev_id)
    318{
    319	struct pluto *pluto = dev_id;
    320	u32 tscr;
    321
    322	/* check whether an interrupt occurred on this device */
    323	tscr = pluto_readreg(pluto, REG_TSCR);
    324	if (!(tscr & (TSCR_DE | TSCR_OVR)))
    325		return IRQ_NONE;
    326
    327	if (tscr == 0xffffffff) {
    328		if (pluto->dead == 0)
    329			dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
    330		/* It's dead Jim */
    331		pluto->dead = 1;
    332		return IRQ_HANDLED;
    333	}
    334
    335	/* dma end interrupt */
    336	if (tscr & TSCR_DE) {
    337		pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
    338		/* overflow interrupt */
    339		if (tscr & TSCR_OVR)
    340			pluto->overflow++;
    341		if (pluto->overflow) {
    342			dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
    343					pluto->overflow);
    344			pluto_reset_ts(pluto, 1);
    345			pluto->overflow = 0;
    346		}
    347	} else if (tscr & TSCR_OVR) {
    348		pluto->overflow++;
    349	}
    350
    351	/* ACK the interrupt */
    352	pluto_write_tscr(pluto, tscr | TSCR_IACK);
    353
    354	return IRQ_HANDLED;
    355}
    356
    357static void pluto_enable_irqs(struct pluto *pluto)
    358{
    359	u32 val = pluto_readreg(pluto, REG_TSCR);
    360
    361	/* disable AFUL and LOCK interrupts */
    362	val |= (TSCR_MSKA | TSCR_MSKL);
    363	/* enable DMA and OVERFLOW interrupts */
    364	val &= ~(TSCR_DEM | TSCR_MSKO);
    365	/* clear pending interrupts */
    366	val |= TSCR_IACK;
    367
    368	pluto_write_tscr(pluto, val);
    369}
    370
    371static void pluto_disable_irqs(struct pluto *pluto)
    372{
    373	u32 val = pluto_readreg(pluto, REG_TSCR);
    374
    375	/* disable all interrupts */
    376	val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
    377	/* clear pending interrupts */
    378	val |= TSCR_IACK;
    379
    380	pluto_write_tscr(pluto, val);
    381}
    382
    383static int pluto_hw_init(struct pluto *pluto)
    384{
    385	pluto_reset_frontend(pluto, 1);
    386
    387	/* set automatic LED control by FPGA */
    388	pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
    389
    390	/* set data endianness */
    391#ifdef __LITTLE_ENDIAN
    392	pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
    393#else
    394	pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
    395#endif
    396	/* map DMA and set address */
    397	pluto_dma_map(pluto);
    398	pluto_set_dma_addr(pluto);
    399
    400	/* enable interrupts */
    401	pluto_enable_irqs(pluto);
    402
    403	/* reset TS logic */
    404	pluto_reset_ts(pluto, 1);
    405
    406	return 0;
    407}
    408
    409static void pluto_hw_exit(struct pluto *pluto)
    410{
    411	/* disable interrupts */
    412	pluto_disable_irqs(pluto);
    413
    414	pluto_reset_ts(pluto, 0);
    415
    416	/* LED: disable automatic control, enable yellow, disable green */
    417	pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
    418
    419	/* unmap DMA */
    420	pluto_dma_unmap(pluto);
    421
    422	pluto_reset_frontend(pluto, 0);
    423}
    424
    425static inline u32 divide(u32 numerator, u32 denominator)
    426{
    427	if (denominator == 0)
    428		return ~0;
    429
    430	return DIV_ROUND_CLOSEST(numerator, denominator);
    431}
    432
    433/* LG Innotek TDTE-E001P (Infineon TUA6034) */
    434static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
    435{
    436	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
    437	struct pluto *pluto = frontend_to_pluto(fe);
    438	struct i2c_msg msg;
    439	int ret;
    440	u8 buf[4];
    441	u32 div;
    442
    443	// Fref = 166.667 Hz
    444	// Fref * 3 = 500.000 Hz
    445	// IF = 36166667
    446	// IF / Fref = 217
    447	//div = divide(p->frequency + 36166667, 166667);
    448	div = divide(p->frequency * 3, 500000) + 217;
    449	buf[0] = (div >> 8) & 0x7f;
    450	buf[1] = (div >> 0) & 0xff;
    451
    452	if (p->frequency < 611000000)
    453		buf[2] = 0xb4;
    454	else if (p->frequency < 811000000)
    455		buf[2] = 0xbc;
    456	else
    457		buf[2] = 0xf4;
    458
    459	// VHF: 174-230 MHz
    460	// center: 350 MHz
    461	// UHF: 470-862 MHz
    462	if (p->frequency < 350000000)
    463		buf[3] = 0x02;
    464	else
    465		buf[3] = 0x04;
    466
    467	if (p->bandwidth_hz == 8000000)
    468		buf[3] |= 0x08;
    469
    470	msg.addr = I2C_ADDR_TUA6034 >> 1;
    471	msg.flags = 0;
    472	msg.buf = buf;
    473	msg.len = sizeof(buf);
    474
    475	if (fe->ops.i2c_gate_ctrl)
    476		fe->ops.i2c_gate_ctrl(fe, 1);
    477	ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
    478	if (ret < 0)
    479		return ret;
    480	else if (ret == 0)
    481		return -EREMOTEIO;
    482
    483	return 0;
    484}
    485
    486static int pluto2_request_firmware(struct dvb_frontend *fe,
    487				   const struct firmware **fw, char *name)
    488{
    489	struct pluto *pluto = frontend_to_pluto(fe);
    490
    491	return request_firmware(fw, name, &pluto->pdev->dev);
    492}
    493
    494static struct tda1004x_config pluto2_fe_config = {
    495	.demod_address = I2C_ADDR_TDA10046 >> 1,
    496	.invert = 1,
    497	.invert_oclk = 0,
    498	.xtal_freq = TDA10046_XTAL_16M,
    499	.agc_config = TDA10046_AGC_DEFAULT,
    500	.if_freq = TDA10046_FREQ_3617,
    501	.request_firmware = pluto2_request_firmware,
    502};
    503
    504static int frontend_init(struct pluto *pluto)
    505{
    506	int ret;
    507
    508	pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
    509	if (!pluto->fe) {
    510		dev_err(&pluto->pdev->dev, "could not attach frontend\n");
    511		return -ENODEV;
    512	}
    513	pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
    514
    515	ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
    516	if (ret < 0) {
    517		if (pluto->fe->ops.release)
    518			pluto->fe->ops.release(pluto->fe);
    519		return ret;
    520	}
    521
    522	return 0;
    523}
    524
    525static void pluto_read_rev(struct pluto *pluto)
    526{
    527	u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
    528	dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
    529			(val >> 12) & 0x0f, (val >> 4) & 0xff);
    530}
    531
    532static void pluto_read_mac(struct pluto *pluto, u8 *mac)
    533{
    534	u32 val = pluto_readreg(pluto, REG_MMAC);
    535	mac[0] = (val >> 8) & 0xff;
    536	mac[1] = (val >> 0) & 0xff;
    537
    538	val = pluto_readreg(pluto, REG_IMAC);
    539	mac[2] = (val >> 8) & 0xff;
    540	mac[3] = (val >> 0) & 0xff;
    541
    542	val = pluto_readreg(pluto, REG_LMAC);
    543	mac[4] = (val >> 8) & 0xff;
    544	mac[5] = (val >> 0) & 0xff;
    545
    546	dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
    547}
    548
    549static int pluto_read_serial(struct pluto *pluto)
    550{
    551	struct pci_dev *pdev = pluto->pdev;
    552	unsigned int i, j;
    553	u8 __iomem *cis;
    554
    555	cis = pci_iomap(pdev, 1, 0);
    556	if (!cis)
    557		return -EIO;
    558
    559	dev_info(&pdev->dev, "S/N ");
    560
    561	for (i = 0xe0; i < 0x100; i += 4) {
    562		u32 val = readl(&cis[i]);
    563		for (j = 0; j < 32; j += 8) {
    564			if ((val & 0xff) == 0xff)
    565				goto out;
    566			printk(KERN_CONT "%c", val & 0xff);
    567			val >>= 8;
    568		}
    569	}
    570out:
    571	printk(KERN_CONT "\n");
    572	pci_iounmap(pdev, cis);
    573
    574	return 0;
    575}
    576
    577static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
    578{
    579	struct pluto *pluto;
    580	struct dvb_adapter *dvb_adapter;
    581	struct dvb_demux *dvbdemux;
    582	struct dmx_demux *dmx;
    583	int ret = -ENOMEM;
    584
    585	pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
    586	if (!pluto)
    587		goto out;
    588
    589	pluto->pdev = pdev;
    590
    591	ret = pci_enable_device(pdev);
    592	if (ret < 0)
    593		goto err_kfree;
    594
    595	/* enable interrupts */
    596	pci_write_config_dword(pdev, 0x6c, 0x8000);
    597
    598	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
    599	if (ret < 0)
    600		goto err_pci_disable_device;
    601
    602	pci_set_master(pdev);
    603
    604	ret = pci_request_regions(pdev, DRIVER_NAME);
    605	if (ret < 0)
    606		goto err_pci_disable_device;
    607
    608	pluto->io_mem = pci_iomap(pdev, 0, 0x40);
    609	if (!pluto->io_mem) {
    610		ret = -EIO;
    611		goto err_pci_release_regions;
    612	}
    613
    614	pci_set_drvdata(pdev, pluto);
    615
    616	ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
    617	if (ret < 0)
    618		goto err_pci_iounmap;
    619
    620	ret = pluto_hw_init(pluto);
    621	if (ret < 0)
    622		goto err_free_irq;
    623
    624	/* i2c */
    625	i2c_set_adapdata(&pluto->i2c_adap, pluto);
    626	strscpy(pluto->i2c_adap.name, DRIVER_NAME, sizeof(pluto->i2c_adap.name));
    627	pluto->i2c_adap.owner = THIS_MODULE;
    628	pluto->i2c_adap.dev.parent = &pdev->dev;
    629	pluto->i2c_adap.algo_data = &pluto->i2c_bit;
    630	pluto->i2c_bit.data = pluto;
    631	pluto->i2c_bit.setsda = pluto_setsda;
    632	pluto->i2c_bit.setscl = pluto_setscl;
    633	pluto->i2c_bit.getsda = pluto_getsda;
    634	pluto->i2c_bit.getscl = pluto_getscl;
    635	pluto->i2c_bit.udelay = 10;
    636	pluto->i2c_bit.timeout = 10;
    637
    638	/* Raise SCL and SDA */
    639	pluto_setsda(pluto, 1);
    640	pluto_setscl(pluto, 1);
    641
    642	ret = i2c_bit_add_bus(&pluto->i2c_adap);
    643	if (ret < 0)
    644		goto err_pluto_hw_exit;
    645
    646	/* dvb */
    647	ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
    648				   THIS_MODULE, &pdev->dev, adapter_nr);
    649	if (ret < 0)
    650		goto err_i2c_del_adapter;
    651
    652	dvb_adapter = &pluto->dvb_adapter;
    653
    654	pluto_read_rev(pluto);
    655	pluto_read_serial(pluto);
    656	pluto_read_mac(pluto, dvb_adapter->proposed_mac);
    657
    658	dvbdemux = &pluto->demux;
    659	dvbdemux->filternum = 256;
    660	dvbdemux->feednum = 256;
    661	dvbdemux->start_feed = pluto_start_feed;
    662	dvbdemux->stop_feed = pluto_stop_feed;
    663	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
    664			DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
    665	ret = dvb_dmx_init(dvbdemux);
    666	if (ret < 0)
    667		goto err_dvb_unregister_adapter;
    668
    669	dmx = &dvbdemux->dmx;
    670
    671	pluto->hw_frontend.source = DMX_FRONTEND_0;
    672	pluto->mem_frontend.source = DMX_MEMORY_FE;
    673	pluto->dmxdev.filternum = NHWFILTERS;
    674	pluto->dmxdev.demux = dmx;
    675
    676	ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
    677	if (ret < 0)
    678		goto err_dvb_dmx_release;
    679
    680	ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
    681	if (ret < 0)
    682		goto err_dvb_dmxdev_release;
    683
    684	ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
    685	if (ret < 0)
    686		goto err_remove_hw_frontend;
    687
    688	ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
    689	if (ret < 0)
    690		goto err_remove_mem_frontend;
    691
    692	ret = frontend_init(pluto);
    693	if (ret < 0)
    694		goto err_disconnect_frontend;
    695
    696	dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
    697out:
    698	return ret;
    699
    700err_disconnect_frontend:
    701	dmx->disconnect_frontend(dmx);
    702err_remove_mem_frontend:
    703	dmx->remove_frontend(dmx, &pluto->mem_frontend);
    704err_remove_hw_frontend:
    705	dmx->remove_frontend(dmx, &pluto->hw_frontend);
    706err_dvb_dmxdev_release:
    707	dvb_dmxdev_release(&pluto->dmxdev);
    708err_dvb_dmx_release:
    709	dvb_dmx_release(dvbdemux);
    710err_dvb_unregister_adapter:
    711	dvb_unregister_adapter(dvb_adapter);
    712err_i2c_del_adapter:
    713	i2c_del_adapter(&pluto->i2c_adap);
    714err_pluto_hw_exit:
    715	pluto_hw_exit(pluto);
    716err_free_irq:
    717	free_irq(pdev->irq, pluto);
    718err_pci_iounmap:
    719	pci_iounmap(pdev, pluto->io_mem);
    720err_pci_release_regions:
    721	pci_release_regions(pdev);
    722err_pci_disable_device:
    723	pci_disable_device(pdev);
    724err_kfree:
    725	kfree(pluto);
    726	goto out;
    727}
    728
    729static void pluto2_remove(struct pci_dev *pdev)
    730{
    731	struct pluto *pluto = pci_get_drvdata(pdev);
    732	struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
    733	struct dvb_demux *dvbdemux = &pluto->demux;
    734	struct dmx_demux *dmx = &dvbdemux->dmx;
    735
    736	dmx->close(dmx);
    737	dvb_net_release(&pluto->dvbnet);
    738	if (pluto->fe)
    739		dvb_unregister_frontend(pluto->fe);
    740
    741	dmx->disconnect_frontend(dmx);
    742	dmx->remove_frontend(dmx, &pluto->mem_frontend);
    743	dmx->remove_frontend(dmx, &pluto->hw_frontend);
    744	dvb_dmxdev_release(&pluto->dmxdev);
    745	dvb_dmx_release(dvbdemux);
    746	dvb_unregister_adapter(dvb_adapter);
    747	i2c_del_adapter(&pluto->i2c_adap);
    748	pluto_hw_exit(pluto);
    749	free_irq(pdev->irq, pluto);
    750	pci_iounmap(pdev, pluto->io_mem);
    751	pci_release_regions(pdev);
    752	pci_disable_device(pdev);
    753	kfree(pluto);
    754}
    755
    756#ifndef PCI_VENDOR_ID_SCM
    757#define PCI_VENDOR_ID_SCM	0x0432
    758#endif
    759#ifndef PCI_DEVICE_ID_PLUTO2
    760#define PCI_DEVICE_ID_PLUTO2	0x0001
    761#endif
    762
    763static const struct pci_device_id pluto2_id_table[] = {
    764	{
    765		.vendor = PCI_VENDOR_ID_SCM,
    766		.device = PCI_DEVICE_ID_PLUTO2,
    767		.subvendor = PCI_ANY_ID,
    768		.subdevice = PCI_ANY_ID,
    769	}, {
    770		/* empty */
    771	},
    772};
    773
    774MODULE_DEVICE_TABLE(pci, pluto2_id_table);
    775
    776static struct pci_driver pluto2_driver = {
    777	.name = DRIVER_NAME,
    778	.id_table = pluto2_id_table,
    779	.probe = pluto2_probe,
    780	.remove = pluto2_remove,
    781};
    782
    783module_pci_driver(pluto2_driver);
    784
    785MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
    786MODULE_DESCRIPTION("Pluto2 driver");
    787MODULE_LICENSE("GPL");