nuvoton-cir.h (9666B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR 4 * 5 * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com> 6 * Copyright (C) 2009 Nuvoton PS Team 7 * 8 * Special thanks to Nuvoton for providing hardware, spec sheets and 9 * sample code upon which portions of this driver are based. Indirect 10 * thanks also to Maxim Levitsky, whose ene_ir driver this driver is 11 * modeled after. 12 */ 13 14#include <linux/spinlock.h> 15#include <linux/ioctl.h> 16 17/* platform driver name to register */ 18#define NVT_DRIVER_NAME "nuvoton-cir" 19 20/* debugging module parameter */ 21static int debug; 22 23 24#define nvt_dbg(text, ...) \ 25 if (debug) \ 26 printk(KERN_DEBUG \ 27 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) 28 29#define nvt_dbg_verbose(text, ...) \ 30 if (debug > 1) \ 31 printk(KERN_DEBUG \ 32 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) 33 34#define nvt_dbg_wake(text, ...) \ 35 if (debug > 2) \ 36 printk(KERN_DEBUG \ 37 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) 38 39 40#define RX_BUF_LEN 32 41 42#define SIO_ID_MASK 0xfff0 43 44enum nvt_chip_ver { 45 NVT_UNKNOWN = 0, 46 NVT_W83667HG = 0xa510, 47 NVT_6775F = 0xb470, 48 NVT_6776F = 0xc330, 49 NVT_6779D = 0xc560, 50 NVT_INVALID = 0xffff, 51}; 52 53struct nvt_chip { 54 const char *name; 55 enum nvt_chip_ver chip_ver; 56}; 57 58struct nvt_dev { 59 struct rc_dev *rdev; 60 61 spinlock_t lock; 62 63 /* for rx */ 64 u8 buf[RX_BUF_LEN]; 65 unsigned int pkts; 66 67 /* EFER Config register index/data pair */ 68 u32 cr_efir; 69 u32 cr_efdr; 70 71 /* hardware I/O settings */ 72 unsigned long cir_addr; 73 unsigned long cir_wake_addr; 74 int cir_irq; 75 76 enum nvt_chip_ver chip_ver; 77 /* hardware id */ 78 u8 chip_major; 79 u8 chip_minor; 80 81 /* carrier period = 1 / frequency */ 82 u32 carrier; 83}; 84 85/* buffer packet constants */ 86#define BUF_PULSE_BIT 0x80 87#define BUF_LEN_MASK 0x7f 88#define BUF_REPEAT_BYTE 0x70 89#define BUF_REPEAT_MASK 0xf0 90 91/* CIR settings */ 92 93/* total length of CIR and CIR WAKE */ 94#define CIR_IOREG_LENGTH 0x0f 95 96/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL */ 97#define CIR_RX_LIMIT_COUNT (IR_DEFAULT_TIMEOUT / SAMPLE_PERIOD) 98 99/* CIR Regs */ 100#define CIR_IRCON 0x00 101#define CIR_IRSTS 0x01 102#define CIR_IREN 0x02 103#define CIR_RXFCONT 0x03 104#define CIR_CP 0x04 105#define CIR_CC 0x05 106#define CIR_SLCH 0x06 107#define CIR_SLCL 0x07 108#define CIR_FIFOCON 0x08 109#define CIR_IRFIFOSTS 0x09 110#define CIR_SRXFIFO 0x0a 111#define CIR_TXFCONT 0x0b 112#define CIR_STXFIFO 0x0c 113#define CIR_FCCH 0x0d 114#define CIR_FCCL 0x0e 115#define CIR_IRFSM 0x0f 116 117/* CIR IRCON settings */ 118#define CIR_IRCON_RECV 0x80 119#define CIR_IRCON_WIREN 0x40 120#define CIR_IRCON_TXEN 0x20 121#define CIR_IRCON_RXEN 0x10 122#define CIR_IRCON_WRXINV 0x08 123#define CIR_IRCON_RXINV 0x04 124 125#define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00 126#define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01 127#define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02 128#define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03 129 130/* FIXME: make this a runtime option */ 131/* select sample period as 50us */ 132#define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 133 134/* CIR IRSTS settings */ 135#define CIR_IRSTS_RDR 0x80 136#define CIR_IRSTS_RTR 0x40 137#define CIR_IRSTS_PE 0x20 138#define CIR_IRSTS_RFO 0x10 139#define CIR_IRSTS_TE 0x08 140#define CIR_IRSTS_TTR 0x04 141#define CIR_IRSTS_TFU 0x02 142#define CIR_IRSTS_GH 0x01 143 144/* CIR IREN settings */ 145#define CIR_IREN_RDR 0x80 146#define CIR_IREN_RTR 0x40 147#define CIR_IREN_PE 0x20 148#define CIR_IREN_RFO 0x10 149#define CIR_IREN_TE 0x08 150#define CIR_IREN_TTR 0x04 151#define CIR_IREN_TFU 0x02 152#define CIR_IREN_GH 0x01 153 154/* CIR FIFOCON settings */ 155#define CIR_FIFOCON_TXFIFOCLR 0x80 156 157#define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00 158#define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10 159#define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20 160#define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30 161 162/* FIXME: make this a runtime option */ 163/* select TX trigger level as 16 */ 164#define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16 165 166#define CIR_FIFOCON_RXFIFOCLR 0x08 167 168#define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00 169#define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01 170#define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02 171#define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03 172 173/* FIXME: make this a runtime option */ 174/* select RX trigger level as 24 */ 175#define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24 176 177/* CIR IRFIFOSTS settings */ 178#define CIR_IRFIFOSTS_IR_PENDING 0x80 179#define CIR_IRFIFOSTS_RX_GS 0x40 180#define CIR_IRFIFOSTS_RX_FTA 0x20 181#define CIR_IRFIFOSTS_RX_EMPTY 0x10 182#define CIR_IRFIFOSTS_RX_FULL 0x08 183#define CIR_IRFIFOSTS_TX_FTA 0x04 184#define CIR_IRFIFOSTS_TX_EMPTY 0x02 185#define CIR_IRFIFOSTS_TX_FULL 0x01 186 187 188/* CIR WAKE UP Regs */ 189#define CIR_WAKE_IRCON 0x00 190#define CIR_WAKE_IRSTS 0x01 191#define CIR_WAKE_IREN 0x02 192#define CIR_WAKE_FIFO_CMP_DEEP 0x03 193#define CIR_WAKE_FIFO_CMP_TOL 0x04 194#define CIR_WAKE_FIFO_COUNT 0x05 195#define CIR_WAKE_SLCH 0x06 196#define CIR_WAKE_SLCL 0x07 197#define CIR_WAKE_FIFOCON 0x08 198#define CIR_WAKE_SRXFSTS 0x09 199#define CIR_WAKE_SAMPLE_RX_FIFO 0x0a 200#define CIR_WAKE_WR_FIFO_DATA 0x0b 201#define CIR_WAKE_RD_FIFO_ONLY 0x0c 202#define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d 203#define CIR_WAKE_FIFO_IGNORE 0x0e 204#define CIR_WAKE_IRFSM 0x0f 205 206/* CIR WAKE UP IRCON settings */ 207#define CIR_WAKE_IRCON_DEC_RST 0x80 208#define CIR_WAKE_IRCON_MODE1 0x40 209#define CIR_WAKE_IRCON_MODE0 0x20 210#define CIR_WAKE_IRCON_RXEN 0x10 211#define CIR_WAKE_IRCON_R 0x08 212#define CIR_WAKE_IRCON_RXINV 0x04 213 214/* FIXME/jarod: make this a runtime option */ 215/* select a same sample period like cir register */ 216#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 217 218/* CIR WAKE IRSTS Bits */ 219#define CIR_WAKE_IRSTS_RDR 0x80 220#define CIR_WAKE_IRSTS_RTR 0x40 221#define CIR_WAKE_IRSTS_PE 0x20 222#define CIR_WAKE_IRSTS_RFO 0x10 223#define CIR_WAKE_IRSTS_GH 0x08 224#define CIR_WAKE_IRSTS_IR_PENDING 0x01 225 226/* CIR WAKE UP IREN Bits */ 227#define CIR_WAKE_IREN_RDR 0x80 228#define CIR_WAKE_IREN_RTR 0x40 229#define CIR_WAKE_IREN_PE 0x20 230#define CIR_WAKE_IREN_RFO 0x10 231#define CIR_WAKE_IREN_GH 0x08 232 233/* CIR WAKE FIFOCON settings */ 234#define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08 235 236#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00 237#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01 238#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02 239#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03 240 241/* FIXME: make this a runtime option */ 242/* select WAKE UP RX trigger level as 67 */ 243#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 244 245/* CIR WAKE SRXFSTS settings */ 246#define CIR_WAKE_IRFIFOSTS_RX_GS 0x80 247#define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40 248#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20 249#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10 250 251/* 252 * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes 253 * the system comparing only 65 bytes (fails with this set to 67) 254 */ 255#define CIR_WAKE_FIFO_CMP_BYTES 65 256/* CIR Wake byte comparison tolerance */ 257#define CIR_WAKE_CMP_TOLERANCE 5 258 259/* 260 * Extended Function Enable Registers: 261 * Extended Function Index Register 262 * Extended Function Data Register 263 */ 264#define CR_EFIR 0x2e 265#define CR_EFDR 0x2f 266 267/* Possible alternate EFER values, depends on how the chip is wired */ 268#define CR_EFIR2 0x4e 269#define CR_EFDR2 0x4f 270 271/* Extended Function Mode enable/disable magic values */ 272#define EFER_EFM_ENABLE 0x87 273#define EFER_EFM_DISABLE 0xaa 274 275/* Config regs we need to care about */ 276#define CR_SOFTWARE_RESET 0x02 277#define CR_LOGICAL_DEV_SEL 0x07 278#define CR_CHIP_ID_HI 0x20 279#define CR_CHIP_ID_LO 0x21 280#define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */ 281#define CR_OUTPUT_PIN_SEL 0x27 282#define CR_MULTIFUNC_PIN_SEL 0x2c 283#define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */ 284/* next three regs valid for both the CIR and CIR_WAKE logical devices */ 285#define CR_CIR_BASE_ADDR_HI 0x60 286#define CR_CIR_BASE_ADDR_LO 0x61 287#define CR_CIR_IRQ_RSRC 0x70 288/* next three regs valid only for ACPI logical dev */ 289#define CR_ACPI_CIR_WAKE 0xe0 290#define CR_ACPI_IRQ_EVENTS 0xf6 291#define CR_ACPI_IRQ_EVENTS2 0xf7 292 293/* Logical devices that we need to care about */ 294#define LOGICAL_DEV_LPT 0x01 295#define LOGICAL_DEV_CIR 0x06 296#define LOGICAL_DEV_ACPI 0x0a 297#define LOGICAL_DEV_CIR_WAKE 0x0e 298 299#define LOGICAL_DEV_DISABLE 0x00 300#define LOGICAL_DEV_ENABLE 0x01 301 302#define CIR_WAKE_ENABLE_BIT 0x08 303#define PME_INTR_CIR_PASS_BIT 0x08 304 305/* w83677hg CIR pin config */ 306#define OUTPUT_PIN_SEL_MASK 0xbc 307#define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */ 308#define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */ 309 310/* w83667hg CIR pin config */ 311#define MULTIFUNC_PIN_SEL_MASK 0x1f 312#define MULTIFUNC_ENABLE_CIR 0x80 /* Pin75=CIRRX, Pin76=CIRTX1 */ 313#define MULTIFUNC_ENABLE_CIRWB 0x20 /* enable wide-band sensor */ 314 315/* MCE CIR signal length, related on sample period */ 316 317/* MCE CIR controller signal length: about 43ms 318 * 43ms / 50us (sample period) * 0.85 (inaccuracy) 319 */ 320#define CONTROLLER_BUF_LEN_MIN 830 321 322/* MCE CIR keyboard signal length: about 26ms 323 * 26ms / 50us (sample period) * 0.85 (inaccuracy) 324 */ 325#define KEYBOARD_BUF_LEN_MAX 650 326#define KEYBOARD_BUF_LEN_MIN 610 327 328/* MCE CIR mouse signal length: about 24ms 329 * 24ms / 50us (sample period) * 0.85 (inaccuracy) 330 */ 331#define MOUSE_BUF_LEN_MIN 565 332 333#define CIR_SAMPLE_PERIOD 50 334#define CIR_SAMPLE_LOW_INACCURACY 0.85 335 336/* MAX silence time that driver will sent to lirc */ 337#define MAX_SILENCE_TIME 60000 338 339#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100 340#define SAMPLE_PERIOD 100 341 342#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50 343#define SAMPLE_PERIOD 50 344 345#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25 346#define SAMPLE_PERIOD 25 347 348#else 349#define SAMPLE_PERIOD 1 350#endif 351 352/* as VISTA MCE definition, valid carrier value */ 353#define MAX_CARRIER 60000 354#define MIN_CARRIER 30000 355 356/* max wakeup sequence length */ 357#define WAKEUP_MAX_SIZE 65