cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

streamzap.c (10630B)


      1// SPDX-License-Identifier: GPL-2.0-or-later
      2/*
      3 * Streamzap Remote Control driver
      4 *
      5 * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
      6 * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
      7 *
      8 * This driver was based on the work of Greg Wickham and Adrian
      9 * Dewhurst. It was substantially rewritten to support correct signal
     10 * gaps and now maintains a delay buffer, which is used to present
     11 * consistent timing behaviour to user space applications. Without the
     12 * delay buffer an ugly hack would be required in lircd, which can
     13 * cause sluggish signal decoding in certain situations.
     14 *
     15 * Ported to in-kernel ir-core interface by Jarod Wilson
     16 *
     17 * This driver is based on the USB skeleton driver packaged with the
     18 * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
     19 */
     20
     21#include <linux/device.h>
     22#include <linux/module.h>
     23#include <linux/slab.h>
     24#include <linux/usb.h>
     25#include <linux/usb/input.h>
     26#include <media/rc-core.h>
     27
     28#define DRIVER_NAME	"streamzap"
     29#define DRIVER_DESC	"Streamzap Remote Control driver"
     30
     31#define USB_STREAMZAP_VENDOR_ID		0x0e9c
     32#define USB_STREAMZAP_PRODUCT_ID	0x0000
     33
     34/* table of devices that work with this driver */
     35static const struct usb_device_id streamzap_table[] = {
     36	/* Streamzap Remote Control */
     37	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
     38	/* Terminating entry */
     39	{ }
     40};
     41
     42MODULE_DEVICE_TABLE(usb, streamzap_table);
     43
     44#define SZ_PULSE_MASK 0xf0
     45#define SZ_SPACE_MASK 0x0f
     46#define SZ_TIMEOUT    0xff
     47#define SZ_RESOLUTION 256
     48
     49/* number of samples buffered */
     50#define SZ_BUF_LEN 128
     51
     52enum StreamzapDecoderState {
     53	PulseSpace,
     54	FullPulse,
     55	FullSpace,
     56	IgnorePulse
     57};
     58
     59/* structure to hold our device specific stuff */
     60struct streamzap_ir {
     61	/* ir-core */
     62	struct rc_dev *rdev;
     63
     64	/* core device info */
     65	struct device *dev;
     66
     67	/* usb */
     68	struct urb		*urb_in;
     69
     70	/* buffer & dma */
     71	unsigned char		*buf_in;
     72	dma_addr_t		dma_in;
     73	unsigned int		buf_in_len;
     74
     75	/* track what state we're in */
     76	enum StreamzapDecoderState decoder_state;
     77
     78	char			phys[64];
     79};
     80
     81
     82/* local function prototypes */
     83static int streamzap_probe(struct usb_interface *interface,
     84			   const struct usb_device_id *id);
     85static void streamzap_disconnect(struct usb_interface *interface);
     86static void streamzap_callback(struct urb *urb);
     87static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
     88static int streamzap_resume(struct usb_interface *intf);
     89
     90/* usb specific object needed to register this driver with the usb subsystem */
     91static struct usb_driver streamzap_driver = {
     92	.name =		DRIVER_NAME,
     93	.probe =	streamzap_probe,
     94	.disconnect =	streamzap_disconnect,
     95	.suspend =	streamzap_suspend,
     96	.resume =	streamzap_resume,
     97	.id_table =	streamzap_table,
     98};
     99
    100static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
    101{
    102	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
    103		(rawir.pulse ? "pulse" : "space"), rawir.duration);
    104	ir_raw_event_store_with_filter(sz->rdev, &rawir);
    105}
    106
    107static void sz_push_full_pulse(struct streamzap_ir *sz,
    108			       unsigned char value)
    109{
    110	struct ir_raw_event rawir = {
    111		.pulse = true,
    112		.duration = value * SZ_RESOLUTION + SZ_RESOLUTION / 2,
    113	};
    114
    115	sz_push(sz, rawir);
    116}
    117
    118static void sz_push_half_pulse(struct streamzap_ir *sz,
    119			       unsigned char value)
    120{
    121	sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
    122}
    123
    124static void sz_push_full_space(struct streamzap_ir *sz,
    125			       unsigned char value)
    126{
    127	struct ir_raw_event rawir = {
    128		.pulse = false,
    129		.duration = value * SZ_RESOLUTION + SZ_RESOLUTION / 2,
    130	};
    131
    132	sz_push(sz, rawir);
    133}
    134
    135static void sz_push_half_space(struct streamzap_ir *sz,
    136			       unsigned long value)
    137{
    138	sz_push_full_space(sz, value & SZ_SPACE_MASK);
    139}
    140
    141/*
    142 * streamzap_callback - usb IRQ handler callback
    143 *
    144 * This procedure is invoked on reception of data from
    145 * the usb remote.
    146 */
    147static void streamzap_callback(struct urb *urb)
    148{
    149	struct streamzap_ir *sz;
    150	unsigned int i;
    151	int len;
    152
    153	if (!urb)
    154		return;
    155
    156	sz = urb->context;
    157	len = urb->actual_length;
    158
    159	switch (urb->status) {
    160	case -ECONNRESET:
    161	case -ENOENT:
    162	case -ESHUTDOWN:
    163		/*
    164		 * this urb is terminated, clean up.
    165		 * sz might already be invalid at this point
    166		 */
    167		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
    168		return;
    169	default:
    170		break;
    171	}
    172
    173	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
    174	for (i = 0; i < len; i++) {
    175		dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
    176			i, (unsigned char)sz->buf_in[i]);
    177		switch (sz->decoder_state) {
    178		case PulseSpace:
    179			if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
    180				SZ_PULSE_MASK) {
    181				sz->decoder_state = FullPulse;
    182				continue;
    183			} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
    184					== SZ_SPACE_MASK) {
    185				sz_push_half_pulse(sz, sz->buf_in[i]);
    186				sz->decoder_state = FullSpace;
    187				continue;
    188			} else {
    189				sz_push_half_pulse(sz, sz->buf_in[i]);
    190				sz_push_half_space(sz, sz->buf_in[i]);
    191			}
    192			break;
    193		case FullPulse:
    194			sz_push_full_pulse(sz, sz->buf_in[i]);
    195			sz->decoder_state = IgnorePulse;
    196			break;
    197		case FullSpace:
    198			if (sz->buf_in[i] == SZ_TIMEOUT) {
    199				struct ir_raw_event rawir = {
    200					.pulse = false,
    201					.duration = sz->rdev->timeout
    202				};
    203				sz_push(sz, rawir);
    204			} else {
    205				sz_push_full_space(sz, sz->buf_in[i]);
    206			}
    207			sz->decoder_state = PulseSpace;
    208			break;
    209		case IgnorePulse:
    210			if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
    211				SZ_SPACE_MASK) {
    212				sz->decoder_state = FullSpace;
    213				continue;
    214			}
    215			sz_push_half_space(sz, sz->buf_in[i]);
    216			sz->decoder_state = PulseSpace;
    217			break;
    218		}
    219	}
    220
    221	ir_raw_event_handle(sz->rdev);
    222	usb_submit_urb(urb, GFP_ATOMIC);
    223}
    224
    225static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz,
    226					    struct usb_device *usbdev)
    227{
    228	struct rc_dev *rdev;
    229	struct device *dev = sz->dev;
    230	int ret;
    231
    232	rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
    233	if (!rdev)
    234		goto out;
    235
    236	usb_make_path(usbdev, sz->phys, sizeof(sz->phys));
    237	strlcat(sz->phys, "/input0", sizeof(sz->phys));
    238
    239	rdev->device_name = "Streamzap PC Remote Infrared Receiver";
    240	rdev->input_phys = sz->phys;
    241	usb_to_input_id(usbdev, &rdev->input_id);
    242	rdev->dev.parent = dev;
    243	rdev->priv = sz;
    244	rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
    245	rdev->driver_name = DRIVER_NAME;
    246	rdev->map_name = RC_MAP_STREAMZAP;
    247	rdev->rx_resolution = SZ_RESOLUTION;
    248
    249	ret = rc_register_device(rdev);
    250	if (ret < 0) {
    251		dev_err(dev, "remote input device register failed\n");
    252		goto out;
    253	}
    254
    255	return rdev;
    256
    257out:
    258	rc_free_device(rdev);
    259	return NULL;
    260}
    261
    262/*
    263 *	streamzap_probe
    264 *
    265 *	Called by usb-core to associated with a candidate device
    266 *	On any failure the return value is the ERROR
    267 *	On success return 0
    268 */
    269static int streamzap_probe(struct usb_interface *intf,
    270			   const struct usb_device_id *id)
    271{
    272	struct usb_device *usbdev = interface_to_usbdev(intf);
    273	struct usb_endpoint_descriptor *endpoint;
    274	struct usb_host_interface *iface_host;
    275	struct streamzap_ir *sz = NULL;
    276	int retval = -ENOMEM;
    277	int pipe, maxp;
    278
    279	/* Allocate space for device driver specific data */
    280	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
    281	if (!sz)
    282		return -ENOMEM;
    283
    284	/* Check to ensure endpoint information matches requirements */
    285	iface_host = intf->cur_altsetting;
    286
    287	if (iface_host->desc.bNumEndpoints != 1) {
    288		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
    289			__func__, iface_host->desc.bNumEndpoints);
    290		retval = -ENODEV;
    291		goto free_sz;
    292	}
    293
    294	endpoint = &iface_host->endpoint[0].desc;
    295	if (!usb_endpoint_dir_in(endpoint)) {
    296		dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n",
    297			__func__, endpoint->bEndpointAddress);
    298		retval = -ENODEV;
    299		goto free_sz;
    300	}
    301
    302	if (!usb_endpoint_xfer_int(endpoint)) {
    303		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n",
    304			__func__, endpoint->bmAttributes);
    305		retval = -ENODEV;
    306		goto free_sz;
    307	}
    308
    309	pipe = usb_rcvintpipe(usbdev, endpoint->bEndpointAddress);
    310	maxp = usb_maxpacket(usbdev, pipe);
    311
    312	if (maxp == 0) {
    313		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
    314			__func__);
    315		retval = -ENODEV;
    316		goto free_sz;
    317	}
    318
    319	/* Allocate the USB buffer and IRQ URB */
    320	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
    321	if (!sz->buf_in)
    322		goto free_sz;
    323
    324	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
    325	if (!sz->urb_in)
    326		goto free_buf_in;
    327
    328	sz->dev = &intf->dev;
    329	sz->buf_in_len = maxp;
    330
    331	sz->rdev = streamzap_init_rc_dev(sz, usbdev);
    332	if (!sz->rdev)
    333		goto rc_dev_fail;
    334
    335	sz->decoder_state = PulseSpace;
    336	/* FIXME: don't yet have a way to set this */
    337	sz->rdev->timeout = SZ_TIMEOUT * SZ_RESOLUTION;
    338	#if 0
    339	/* not yet supported, depends on patches from maxim */
    340	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
    341	sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION;
    342	sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION;
    343	#endif
    344
    345	/* Complete final initialisations */
    346	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
    347			 maxp, streamzap_callback, sz, endpoint->bInterval);
    348	sz->urb_in->transfer_dma = sz->dma_in;
    349	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
    350
    351	usb_set_intfdata(intf, sz);
    352
    353	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
    354		dev_err(sz->dev, "urb submit failed\n");
    355
    356	return 0;
    357
    358rc_dev_fail:
    359	usb_free_urb(sz->urb_in);
    360free_buf_in:
    361	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
    362free_sz:
    363	kfree(sz);
    364
    365	return retval;
    366}
    367
    368/*
    369 * streamzap_disconnect
    370 *
    371 * Called by the usb core when the device is removed from the system.
    372 *
    373 * This routine guarantees that the driver will not submit any more urbs
    374 * by clearing dev->usbdev.  It is also supposed to terminate any currently
    375 * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
    376 * does not provide any way to do this.
    377 */
    378static void streamzap_disconnect(struct usb_interface *interface)
    379{
    380	struct streamzap_ir *sz = usb_get_intfdata(interface);
    381	struct usb_device *usbdev = interface_to_usbdev(interface);
    382
    383	usb_set_intfdata(interface, NULL);
    384
    385	if (!sz)
    386		return;
    387
    388	rc_unregister_device(sz->rdev);
    389	usb_kill_urb(sz->urb_in);
    390	usb_free_urb(sz->urb_in);
    391	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
    392
    393	kfree(sz);
    394}
    395
    396static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
    397{
    398	struct streamzap_ir *sz = usb_get_intfdata(intf);
    399
    400	usb_kill_urb(sz->urb_in);
    401
    402	return 0;
    403}
    404
    405static int streamzap_resume(struct usb_interface *intf)
    406{
    407	struct streamzap_ir *sz = usb_get_intfdata(intf);
    408
    409	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
    410		dev_err(sz->dev, "Error submitting urb\n");
    411		return -EIO;
    412	}
    413
    414	return 0;
    415}
    416
    417module_usb_driver(streamzap_driver);
    418
    419MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
    420MODULE_DESCRIPTION(DRIVER_DESC);
    421MODULE_LICENSE("GPL");