cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

cinergyT2.h (2339B)

      1/* SPDX-License-Identifier: GPL-2.0-or-later */
      2/*
      3 * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
      4 *
      5 * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
      6 *
      7 * Based on the dvb-usb-framework code and the
      8 * original Terratec Cinergy T2 driver by:
      9 *
     10 * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
     11 *                  Holger Waechtler <holger@qanu.de>
     12 *
     13 *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
     14 */
     15
     16#ifndef _DVB_USB_CINERGYT2_H_
     17#define _DVB_USB_CINERGYT2_H_
     18
     19#include <linux/usb/input.h>
     20
     21#define DVB_USB_LOG_PREFIX "cinergyT2"
     22#include "dvb-usb.h"
     23
     24#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
     25
     26extern int dvb_usb_cinergyt2_debug;
     27
     28#define deb_info(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x001, args)
     29#define deb_xfer(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x002, args)
     30#define deb_pll(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x004, args)
     31#define deb_ts(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x008, args)
     32#define deb_err(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x010, args)
     33#define deb_rc(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x020, args)
     34#define deb_fw(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x040, args)
     35#define deb_mem(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x080, args)
     36#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug,  0x100, args)
     37
     38
     39
     40enum cinergyt2_ep1_cmd {
     41	CINERGYT2_EP1_PID_TABLE_RESET		= 0x01,
     42	CINERGYT2_EP1_PID_SETUP			= 0x02,
     43	CINERGYT2_EP1_CONTROL_STREAM_TRANSFER	= 0x03,
     44	CINERGYT2_EP1_SET_TUNER_PARAMETERS	= 0x04,
     45	CINERGYT2_EP1_GET_TUNER_STATUS		= 0x05,
     46	CINERGYT2_EP1_START_SCAN		= 0x06,
     47	CINERGYT2_EP1_CONTINUE_SCAN		= 0x07,
     48	CINERGYT2_EP1_GET_RC_EVENTS		= 0x08,
     49	CINERGYT2_EP1_SLEEP_MODE		= 0x09,
     50	CINERGYT2_EP1_GET_FIRMWARE_VERSION	= 0x0A
     51};
     52
     53
     54struct dvbt_get_status_msg {
     55	uint32_t freq;
     56	uint8_t bandwidth;
     57	uint16_t tps;
     58	uint8_t flags;
     59	__le16 gain;
     60	uint8_t snr;
     61	__le32 viterbi_error_rate;
     62	uint32_t rs_error_rate;
     63	__le32 uncorrected_block_count;
     64	uint8_t lock_bits;
     65	uint8_t prev_lock_bits;
     66} __attribute__((packed));
     67
     68
     69struct dvbt_set_parameters_msg {
     70	uint8_t cmd;
     71	__le32 freq;
     72	uint8_t bandwidth;
     73	__le16 tps;
     74	uint8_t flags;
     75} __attribute__((packed));
     76
     77
     78extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
     79
     80#endif /* _DVB_USB_CINERGYT2_H_ */
     81