m5602_mt9m111.h (4004B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Driver for the mt9m111 sensor 4 * 5 * Copyright (C) 2008 Erik Andrén 6 * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. 7 * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> 8 * 9 * Portions of code to USB interface and ALi driver software, 10 * Copyright (c) 2006 Willem Duinker 11 * v4l2 interface modeled after the V4L2 driver 12 * for SN9C10x PC Camera Controllers 13 * 14 * Some defines taken from the mt9m111 sensor driver 15 * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr> 16 */ 17 18#ifndef M5602_MT9M111_H_ 19#define M5602_MT9M111_H_ 20 21#include "m5602_sensor.h" 22 23/*****************************************************************************/ 24 25#define MT9M111_SC_CHIPVER 0x00 26#define MT9M111_SC_ROWSTART 0x01 27#define MT9M111_SC_COLSTART 0x02 28#define MT9M111_SC_WINDOW_HEIGHT 0x03 29#define MT9M111_SC_WINDOW_WIDTH 0x04 30#define MT9M111_SC_HBLANK_CONTEXT_B 0x05 31#define MT9M111_SC_VBLANK_CONTEXT_B 0x06 32#define MT9M111_SC_HBLANK_CONTEXT_A 0x07 33#define MT9M111_SC_VBLANK_CONTEXT_A 0x08 34#define MT9M111_SC_SHUTTER_WIDTH 0x09 35#define MT9M111_SC_ROW_SPEED 0x0a 36#define MT9M111_SC_EXTRA_DELAY 0x0b 37#define MT9M111_SC_SHUTTER_DELAY 0x0c 38#define MT9M111_SC_RESET 0x0d 39#define MT9M111_SC_R_MODE_CONTEXT_B 0x20 40#define MT9M111_SC_R_MODE_CONTEXT_A 0x21 41#define MT9M111_SC_FLASH_CONTROL 0x23 42#define MT9M111_SC_GREEN_1_GAIN 0x2b 43#define MT9M111_SC_BLUE_GAIN 0x2c 44#define MT9M111_SC_RED_GAIN 0x2d 45#define MT9M111_SC_GREEN_2_GAIN 0x2e 46#define MT9M111_SC_GLOBAL_GAIN 0x2f 47 48#define MT9M111_CONTEXT_CONTROL 0xc8 49#define MT9M111_PAGE_MAP 0xf0 50#define MT9M111_BYTEWISE_ADDRESS 0xf1 51 52#define MT9M111_CP_OPERATING_MODE_CTL 0x06 53#define MT9M111_CP_LUMA_OFFSET 0x34 54#define MT9M111_CP_LUMA_CLIP 0x35 55#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A 0x3a 56#define MT9M111_CP_LENS_CORRECTION_1 0x3b 57#define MT9M111_CP_DEFECT_CORR_CONTEXT_A 0x4c 58#define MT9M111_CP_DEFECT_CORR_CONTEXT_B 0x4d 59#define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B 0x9b 60#define MT9M111_CP_GLOBAL_CLK_CONTROL 0xb3 61 62#define MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18 0x65 63#define MT9M111_CC_AWB_PARAMETER_7 0x28 64 65#define MT9M111_SENSOR_CORE 0x00 66#define MT9M111_COLORPIPE 0x01 67#define MT9M111_CAMERA_CONTROL 0x02 68 69#define MT9M111_RESET (1 << 0) 70#define MT9M111_RESTART (1 << 1) 71#define MT9M111_ANALOG_STANDBY (1 << 2) 72#define MT9M111_CHIP_ENABLE (1 << 3) 73#define MT9M111_CHIP_DISABLE (0 << 3) 74#define MT9M111_OUTPUT_DISABLE (1 << 4) 75#define MT9M111_SHOW_BAD_FRAMES (1 << 0) 76#define MT9M111_RESTART_BAD_FRAMES (1 << 1) 77#define MT9M111_SYNCHRONIZE_CHANGES (1 << 7) 78 79#define MT9M111_RMB_OVER_SIZED (1 << 0) 80#define MT9M111_RMB_MIRROR_ROWS (1 << 0) 81#define MT9M111_RMB_MIRROR_COLS (1 << 1) 82#define MT9M111_RMB_ROW_SKIP_2X (1 << 2) 83#define MT9M111_RMB_COLUMN_SKIP_2X (1 << 3) 84#define MT9M111_RMB_ROW_SKIP_4X (1 << 4) 85#define MT9M111_RMB_COLUMN_SKIP_4X (1 << 5) 86 87#define MT9M111_COLOR_MATRIX_BYPASS (1 << 4) 88#define MT9M111_SEL_CONTEXT_B (1 << 3) 89 90#define MT9M111_TRISTATE_PIN_IN_STANDBY (1 << 1) 91#define MT9M111_SOC_SOFT_STANDBY (1 << 0) 92 93#define MT9M111_2D_DEFECT_CORRECTION_ENABLE (1 << 0) 94 95#define INITIAL_MAX_GAIN 64 96#define MT9M111_DEFAULT_GAIN 283 97#define MT9M111_GREEN_GAIN_DEFAULT 0x20 98#define MT9M111_BLUE_GAIN_DEFAULT 0x20 99#define MT9M111_RED_GAIN_DEFAULT 0x20 100 101/*****************************************************************************/ 102 103/* Kernel module parameters */ 104extern int force_sensor; 105extern bool dump_sensor; 106 107int mt9m111_probe(struct sd *sd); 108int mt9m111_init(struct sd *sd); 109int mt9m111_init_controls(struct sd *sd); 110int mt9m111_start(struct sd *sd); 111void mt9m111_disconnect(struct sd *sd); 112 113static const struct m5602_sensor mt9m111 = { 114 .name = "MT9M111", 115 116 .i2c_slave_id = 0xba, 117 .i2c_regW = 2, 118 119 .probe = mt9m111_probe, 120 .init = mt9m111_init, 121 .init_controls = mt9m111_init_controls, 122 .disconnect = mt9m111_disconnect, 123 .start = mt9m111_start, 124}; 125#endif