kempld-core.c (26534B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Kontron PLD MFD core driver 4 * 5 * Copyright (c) 2010-2013 Kontron Europe GmbH 6 * Author: Michael Brunner <michael.brunner@kontron.com> 7 */ 8 9#include <linux/platform_device.h> 10#include <linux/mfd/core.h> 11#include <linux/mfd/kempld.h> 12#include <linux/module.h> 13#include <linux/dmi.h> 14#include <linux/io.h> 15#include <linux/delay.h> 16#include <linux/acpi.h> 17 18#define MAX_ID_LEN 4 19static char force_device_id[MAX_ID_LEN + 1] = ""; 20module_param_string(force_device_id, force_device_id, 21 sizeof(force_device_id), 0); 22MODULE_PARM_DESC(force_device_id, "Override detected product"); 23 24/* 25 * Get hardware mutex to block firmware from accessing the pld. 26 * It is possible for the firmware may hold the mutex for an extended length of 27 * time. This function will block until access has been granted. 28 */ 29static void kempld_get_hardware_mutex(struct kempld_device_data *pld) 30{ 31 /* The mutex bit will read 1 until access has been granted */ 32 while (ioread8(pld->io_index) & KEMPLD_MUTEX_KEY) 33 usleep_range(1000, 3000); 34} 35 36static void kempld_release_hardware_mutex(struct kempld_device_data *pld) 37{ 38 /* The harware mutex is released when 1 is written to the mutex bit. */ 39 iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); 40} 41 42static int kempld_get_info_generic(struct kempld_device_data *pld) 43{ 44 u16 version; 45 u8 spec; 46 47 kempld_get_mutex(pld); 48 49 version = kempld_read16(pld, KEMPLD_VERSION); 50 spec = kempld_read8(pld, KEMPLD_SPEC); 51 pld->info.buildnr = kempld_read16(pld, KEMPLD_BUILDNR); 52 53 pld->info.minor = KEMPLD_VERSION_GET_MINOR(version); 54 pld->info.major = KEMPLD_VERSION_GET_MAJOR(version); 55 pld->info.number = KEMPLD_VERSION_GET_NUMBER(version); 56 pld->info.type = KEMPLD_VERSION_GET_TYPE(version); 57 58 if (spec == 0xff) { 59 pld->info.spec_minor = 0; 60 pld->info.spec_major = 1; 61 } else { 62 pld->info.spec_minor = KEMPLD_SPEC_GET_MINOR(spec); 63 pld->info.spec_major = KEMPLD_SPEC_GET_MAJOR(spec); 64 } 65 66 if (pld->info.spec_major > 0) 67 pld->feature_mask = kempld_read16(pld, KEMPLD_FEATURE); 68 else 69 pld->feature_mask = 0; 70 71 kempld_release_mutex(pld); 72 73 return 0; 74} 75 76enum kempld_cells { 77 KEMPLD_I2C = 0, 78 KEMPLD_WDT, 79 KEMPLD_GPIO, 80 KEMPLD_UART, 81}; 82 83static const char *kempld_dev_names[] = { 84 [KEMPLD_I2C] = "kempld-i2c", 85 [KEMPLD_WDT] = "kempld-wdt", 86 [KEMPLD_GPIO] = "kempld-gpio", 87 [KEMPLD_UART] = "kempld-uart", 88}; 89 90#define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_dev_names) 91 92static int kempld_register_cells_generic(struct kempld_device_data *pld) 93{ 94 struct mfd_cell devs[KEMPLD_MAX_DEVS] = {}; 95 int i = 0; 96 97 if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C) 98 devs[i++].name = kempld_dev_names[KEMPLD_I2C]; 99 100 if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG) 101 devs[i++].name = kempld_dev_names[KEMPLD_WDT]; 102 103 if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO) 104 devs[i++].name = kempld_dev_names[KEMPLD_GPIO]; 105 106 if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART) 107 devs[i++].name = kempld_dev_names[KEMPLD_UART]; 108 109 return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL); 110} 111 112static struct resource kempld_ioresource = { 113 .start = KEMPLD_IOINDEX, 114 .end = KEMPLD_IODATA, 115 .flags = IORESOURCE_IO, 116}; 117 118static const struct kempld_platform_data kempld_platform_data_generic = { 119 .pld_clock = KEMPLD_CLK, 120 .ioresource = &kempld_ioresource, 121 .get_hardware_mutex = kempld_get_hardware_mutex, 122 .release_hardware_mutex = kempld_release_hardware_mutex, 123 .get_info = kempld_get_info_generic, 124 .register_cells = kempld_register_cells_generic, 125}; 126 127static struct platform_device *kempld_pdev; 128 129static int kempld_create_platform_device(const struct dmi_system_id *id) 130{ 131 const struct kempld_platform_data *pdata = id->driver_data; 132 int ret; 133 134 kempld_pdev = platform_device_alloc("kempld", -1); 135 if (!kempld_pdev) 136 return -ENOMEM; 137 138 ret = platform_device_add_data(kempld_pdev, pdata, sizeof(*pdata)); 139 if (ret) 140 goto err; 141 142 ret = platform_device_add_resources(kempld_pdev, pdata->ioresource, 1); 143 if (ret) 144 goto err; 145 146 ret = platform_device_add(kempld_pdev); 147 if (ret) 148 goto err; 149 150 return 0; 151err: 152 platform_device_put(kempld_pdev); 153 return ret; 154} 155 156/** 157 * kempld_read8 - read 8 bit register 158 * @pld: kempld_device_data structure describing the PLD 159 * @index: register index on the chip 160 * 161 * kempld_get_mutex must be called prior to calling this function. 162 */ 163u8 kempld_read8(struct kempld_device_data *pld, u8 index) 164{ 165 iowrite8(index, pld->io_index); 166 return ioread8(pld->io_data); 167} 168EXPORT_SYMBOL_GPL(kempld_read8); 169 170/** 171 * kempld_write8 - write 8 bit register 172 * @pld: kempld_device_data structure describing the PLD 173 * @index: register index on the chip 174 * @data: new register value 175 * 176 * kempld_get_mutex must be called prior to calling this function. 177 */ 178void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data) 179{ 180 iowrite8(index, pld->io_index); 181 iowrite8(data, pld->io_data); 182} 183EXPORT_SYMBOL_GPL(kempld_write8); 184 185/** 186 * kempld_read16 - read 16 bit register 187 * @pld: kempld_device_data structure describing the PLD 188 * @index: register index on the chip 189 * 190 * kempld_get_mutex must be called prior to calling this function. 191 */ 192u16 kempld_read16(struct kempld_device_data *pld, u8 index) 193{ 194 return kempld_read8(pld, index) | kempld_read8(pld, index + 1) << 8; 195} 196EXPORT_SYMBOL_GPL(kempld_read16); 197 198/** 199 * kempld_write16 - write 16 bit register 200 * @pld: kempld_device_data structure describing the PLD 201 * @index: register index on the chip 202 * @data: new register value 203 * 204 * kempld_get_mutex must be called prior to calling this function. 205 */ 206void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data) 207{ 208 kempld_write8(pld, index, (u8)data); 209 kempld_write8(pld, index + 1, (u8)(data >> 8)); 210} 211EXPORT_SYMBOL_GPL(kempld_write16); 212 213/** 214 * kempld_read32 - read 32 bit register 215 * @pld: kempld_device_data structure describing the PLD 216 * @index: register index on the chip 217 * 218 * kempld_get_mutex must be called prior to calling this function. 219 */ 220u32 kempld_read32(struct kempld_device_data *pld, u8 index) 221{ 222 return kempld_read16(pld, index) | kempld_read16(pld, index + 2) << 16; 223} 224EXPORT_SYMBOL_GPL(kempld_read32); 225 226/** 227 * kempld_write32 - write 32 bit register 228 * @pld: kempld_device_data structure describing the PLD 229 * @index: register index on the chip 230 * @data: new register value 231 * 232 * kempld_get_mutex must be called prior to calling this function. 233 */ 234void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data) 235{ 236 kempld_write16(pld, index, (u16)data); 237 kempld_write16(pld, index + 2, (u16)(data >> 16)); 238} 239EXPORT_SYMBOL_GPL(kempld_write32); 240 241/** 242 * kempld_get_mutex - acquire PLD mutex 243 * @pld: kempld_device_data structure describing the PLD 244 */ 245void kempld_get_mutex(struct kempld_device_data *pld) 246{ 247 const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); 248 249 mutex_lock(&pld->lock); 250 pdata->get_hardware_mutex(pld); 251} 252EXPORT_SYMBOL_GPL(kempld_get_mutex); 253 254/** 255 * kempld_release_mutex - release PLD mutex 256 * @pld: kempld_device_data structure describing the PLD 257 */ 258void kempld_release_mutex(struct kempld_device_data *pld) 259{ 260 const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); 261 262 pdata->release_hardware_mutex(pld); 263 mutex_unlock(&pld->lock); 264} 265EXPORT_SYMBOL_GPL(kempld_release_mutex); 266 267/** 268 * kempld_get_info - update device specific information 269 * @pld: kempld_device_data structure describing the PLD 270 * 271 * This function calls the configured board specific kempld_get_info_XXXX 272 * function which is responsible for gathering information about the specific 273 * hardware. The information is then stored within the pld structure. 274 */ 275static int kempld_get_info(struct kempld_device_data *pld) 276{ 277 int ret; 278 const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); 279 char major, minor; 280 281 ret = pdata->get_info(pld); 282 if (ret) 283 return ret; 284 285 /* The Kontron PLD firmware version string has the following format: 286 * Pwxy.zzzz 287 * P: Fixed 288 * w: PLD number - 1 hex digit 289 * x: Major version - 1 alphanumerical digit (0-9A-V) 290 * y: Minor version - 1 alphanumerical digit (0-9A-V) 291 * zzzz: Build number - 4 zero padded hex digits */ 292 293 if (pld->info.major < 10) 294 major = pld->info.major + '0'; 295 else 296 major = (pld->info.major - 10) + 'A'; 297 if (pld->info.minor < 10) 298 minor = pld->info.minor + '0'; 299 else 300 minor = (pld->info.minor - 10) + 'A'; 301 302 ret = scnprintf(pld->info.version, sizeof(pld->info.version), 303 "P%X%c%c.%04X", pld->info.number, major, minor, 304 pld->info.buildnr); 305 if (ret < 0) 306 return ret; 307 308 return 0; 309} 310 311/* 312 * kempld_register_cells - register cell drivers 313 * 314 * This function registers cell drivers for the detected hardware by calling 315 * the configured kempld_register_cells_XXXX function which is responsible 316 * to detect and register the needed cell drivers. 317 */ 318static int kempld_register_cells(struct kempld_device_data *pld) 319{ 320 const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); 321 322 return pdata->register_cells(pld); 323} 324 325static const char *kempld_get_type_string(struct kempld_device_data *pld) 326{ 327 const char *version_type; 328 329 switch (pld->info.type) { 330 case 0: 331 version_type = "release"; 332 break; 333 case 1: 334 version_type = "debug"; 335 break; 336 case 2: 337 version_type = "custom"; 338 break; 339 default: 340 version_type = "unspecified"; 341 break; 342 } 343 344 return version_type; 345} 346 347static ssize_t pld_version_show(struct device *dev, 348 struct device_attribute *attr, char *buf) 349{ 350 struct kempld_device_data *pld = dev_get_drvdata(dev); 351 352 return scnprintf(buf, PAGE_SIZE, "%s\n", pld->info.version); 353} 354 355static ssize_t pld_specification_show(struct device *dev, 356 struct device_attribute *attr, char *buf) 357{ 358 struct kempld_device_data *pld = dev_get_drvdata(dev); 359 360 return scnprintf(buf, PAGE_SIZE, "%d.%d\n", pld->info.spec_major, 361 pld->info.spec_minor); 362} 363 364static ssize_t pld_type_show(struct device *dev, 365 struct device_attribute *attr, char *buf) 366{ 367 struct kempld_device_data *pld = dev_get_drvdata(dev); 368 369 return scnprintf(buf, PAGE_SIZE, "%s\n", kempld_get_type_string(pld)); 370} 371 372static DEVICE_ATTR_RO(pld_version); 373static DEVICE_ATTR_RO(pld_specification); 374static DEVICE_ATTR_RO(pld_type); 375 376static struct attribute *pld_attributes[] = { 377 &dev_attr_pld_version.attr, 378 &dev_attr_pld_specification.attr, 379 &dev_attr_pld_type.attr, 380 NULL 381}; 382 383static const struct attribute_group pld_attr_group = { 384 .attrs = pld_attributes, 385}; 386 387static int kempld_detect_device(struct kempld_device_data *pld) 388{ 389 u8 index_reg; 390 int ret; 391 392 mutex_lock(&pld->lock); 393 394 /* Check for empty IO space */ 395 index_reg = ioread8(pld->io_index); 396 if (index_reg == 0xff && ioread8(pld->io_data) == 0xff) { 397 mutex_unlock(&pld->lock); 398 return -ENODEV; 399 } 400 401 /* Release hardware mutex if acquired */ 402 if (!(index_reg & KEMPLD_MUTEX_KEY)) { 403 iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); 404 /* PXT and COMe-cPC2 boards may require a second release */ 405 iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); 406 } 407 408 mutex_unlock(&pld->lock); 409 410 ret = kempld_get_info(pld); 411 if (ret) 412 return ret; 413 414 dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n", 415 pld->info.version, kempld_get_type_string(pld), 416 pld->info.spec_major, pld->info.spec_minor); 417 418 ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group); 419 if (ret) 420 return ret; 421 422 ret = kempld_register_cells(pld); 423 if (ret) 424 sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); 425 426 return ret; 427} 428 429#ifdef CONFIG_ACPI 430static int kempld_get_acpi_data(struct platform_device *pdev) 431{ 432 struct list_head resource_list; 433 struct resource *resources; 434 struct resource_entry *rentry; 435 struct device *dev = &pdev->dev; 436 struct acpi_device *acpi_dev = ACPI_COMPANION(dev); 437 const struct kempld_platform_data *pdata; 438 int ret; 439 int count; 440 441 pdata = acpi_device_get_match_data(dev); 442 ret = platform_device_add_data(pdev, pdata, 443 sizeof(struct kempld_platform_data)); 444 if (ret) 445 return ret; 446 447 INIT_LIST_HEAD(&resource_list); 448 ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL); 449 if (ret < 0) 450 goto out; 451 452 count = ret; 453 454 if (count == 0) { 455 ret = platform_device_add_resources(pdev, pdata->ioresource, 1); 456 goto out; 457 } 458 459 resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources), 460 GFP_KERNEL); 461 if (!resources) { 462 ret = -ENOMEM; 463 goto out; 464 } 465 466 count = 0; 467 list_for_each_entry(rentry, &resource_list, node) { 468 memcpy(&resources[count], rentry->res, 469 sizeof(*resources)); 470 count++; 471 } 472 ret = platform_device_add_resources(pdev, resources, count); 473 474out: 475 acpi_dev_free_resource_list(&resource_list); 476 477 return ret; 478} 479#else 480static int kempld_get_acpi_data(struct platform_device *pdev) 481{ 482 return -ENODEV; 483} 484#endif /* CONFIG_ACPI */ 485 486static int kempld_probe(struct platform_device *pdev) 487{ 488 const struct kempld_platform_data *pdata; 489 struct device *dev = &pdev->dev; 490 struct kempld_device_data *pld; 491 struct resource *ioport; 492 int ret; 493 494 if (kempld_pdev == NULL) { 495 /* 496 * No kempld_pdev device has been registered in kempld_init, 497 * so we seem to be probing an ACPI platform device. 498 */ 499 ret = kempld_get_acpi_data(pdev); 500 if (ret) 501 return ret; 502 } else if (kempld_pdev != pdev) { 503 /* 504 * The platform device we are probing is not the one we 505 * registered in kempld_init using the DMI table, so this one 506 * comes from ACPI. 507 * As we can only probe one - abort here and use the DMI 508 * based one instead. 509 */ 510 dev_notice(dev, "platform device exists - not using ACPI\n"); 511 return -ENODEV; 512 } 513 pdata = dev_get_platdata(dev); 514 515 pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL); 516 if (!pld) 517 return -ENOMEM; 518 519 ioport = platform_get_resource(pdev, IORESOURCE_IO, 0); 520 if (!ioport) 521 return -EINVAL; 522 523 pld->io_base = devm_ioport_map(dev, ioport->start, 524 resource_size(ioport)); 525 if (!pld->io_base) 526 return -ENOMEM; 527 528 pld->io_index = pld->io_base; 529 pld->io_data = pld->io_base + 1; 530 pld->pld_clock = pdata->pld_clock; 531 pld->dev = dev; 532 533 mutex_init(&pld->lock); 534 platform_set_drvdata(pdev, pld); 535 536 return kempld_detect_device(pld); 537} 538 539static int kempld_remove(struct platform_device *pdev) 540{ 541 struct kempld_device_data *pld = platform_get_drvdata(pdev); 542 const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); 543 544 sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); 545 546 mfd_remove_devices(&pdev->dev); 547 pdata->release_hardware_mutex(pld); 548 549 return 0; 550} 551 552#ifdef CONFIG_ACPI 553static const struct acpi_device_id kempld_acpi_table[] = { 554 { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic }, 555 { "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic }, 556 {} 557}; 558MODULE_DEVICE_TABLE(acpi, kempld_acpi_table); 559#endif 560 561static struct platform_driver kempld_driver = { 562 .driver = { 563 .name = "kempld", 564 .acpi_match_table = ACPI_PTR(kempld_acpi_table), 565 }, 566 .probe = kempld_probe, 567 .remove = kempld_remove, 568}; 569 570static const struct dmi_system_id kempld_dmi_table[] __initconst = { 571 { 572 .ident = "BBD6", 573 .matches = { 574 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 575 DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"), 576 }, 577 .driver_data = (void *)&kempld_platform_data_generic, 578 .callback = kempld_create_platform_device, 579 }, { 580 .ident = "BBL6", 581 .matches = { 582 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 583 DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"), 584 }, 585 .driver_data = (void *)&kempld_platform_data_generic, 586 .callback = kempld_create_platform_device, 587 }, { 588 .ident = "BDV7", 589 .matches = { 590 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 591 DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"), 592 }, 593 .driver_data = (void *)&kempld_platform_data_generic, 594 .callback = kempld_create_platform_device, 595 }, { 596 .ident = "BHL6", 597 .matches = { 598 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 599 DMI_MATCH(DMI_BOARD_NAME, "COMe-bHL6"), 600 }, 601 .driver_data = (void *)&kempld_platform_data_generic, 602 .callback = kempld_create_platform_device, 603 }, { 604 .ident = "BKL6", 605 .matches = { 606 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 607 DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"), 608 }, 609 .driver_data = (void *)&kempld_platform_data_generic, 610 .callback = kempld_create_platform_device, 611 }, { 612 .ident = "BSL6", 613 .matches = { 614 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 615 DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"), 616 }, 617 .driver_data = (void *)&kempld_platform_data_generic, 618 .callback = kempld_create_platform_device, 619 }, { 620 .ident = "CAL6", 621 .matches = { 622 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 623 DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"), 624 }, 625 .driver_data = (void *)&kempld_platform_data_generic, 626 .callback = kempld_create_platform_device, 627 }, { 628 .ident = "CBL6", 629 .matches = { 630 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 631 DMI_MATCH(DMI_BOARD_NAME, "COMe-cBL6"), 632 }, 633 .driver_data = (void *)&kempld_platform_data_generic, 634 .callback = kempld_create_platform_device, 635 }, { 636 .ident = "CBW6", 637 .matches = { 638 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 639 DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"), 640 }, 641 .driver_data = (void *)&kempld_platform_data_generic, 642 .callback = kempld_create_platform_device, 643 }, { 644 .ident = "CCR2", 645 .matches = { 646 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 647 DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP2"), 648 }, 649 .driver_data = (void *)&kempld_platform_data_generic, 650 .callback = kempld_create_platform_device, 651 }, { 652 .ident = "CCR6", 653 .matches = { 654 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 655 DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP6"), 656 }, 657 .driver_data = (void *)&kempld_platform_data_generic, 658 .callback = kempld_create_platform_device, 659 }, { 660 .ident = "CDV7", 661 .matches = { 662 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 663 DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"), 664 }, 665 .driver_data = (void *)&kempld_platform_data_generic, 666 .callback = kempld_create_platform_device, 667 }, { 668 .ident = "CHL6", 669 .matches = { 670 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 671 DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"), 672 }, 673 .driver_data = (void *)&kempld_platform_data_generic, 674 .callback = kempld_create_platform_device, 675 }, { 676 .ident = "CHR2", 677 .matches = { 678 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 679 DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T2"), 680 }, 681 .driver_data = (void *)&kempld_platform_data_generic, 682 .callback = kempld_create_platform_device, 683 }, { 684 .ident = "CHR2", 685 .matches = { 686 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 687 DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T2"), 688 }, 689 .driver_data = (void *)&kempld_platform_data_generic, 690 .callback = kempld_create_platform_device, 691 }, { 692 .ident = "CHR2", 693 .matches = { 694 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 695 DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC2"), 696 }, 697 .driver_data = (void *)&kempld_platform_data_generic, 698 .callback = kempld_create_platform_device, 699 }, { 700 .ident = "CHR6", 701 .matches = { 702 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 703 DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T6"), 704 }, 705 .driver_data = (void *)&kempld_platform_data_generic, 706 .callback = kempld_create_platform_device, 707 }, { 708 .ident = "CHR6", 709 .matches = { 710 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 711 DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T6"), 712 }, 713 .driver_data = (void *)&kempld_platform_data_generic, 714 .callback = kempld_create_platform_device, 715 }, { 716 .ident = "CHR6", 717 .matches = { 718 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 719 DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC6"), 720 }, 721 .driver_data = (void *)&kempld_platform_data_generic, 722 .callback = kempld_create_platform_device, 723 }, { 724 .ident = "CKL6", 725 .matches = { 726 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 727 DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"), 728 }, 729 .driver_data = (void *)&kempld_platform_data_generic, 730 .callback = kempld_create_platform_device, 731 }, { 732 .ident = "CNTG", 733 .matches = { 734 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 735 DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-PC"), 736 }, 737 .driver_data = (void *)&kempld_platform_data_generic, 738 .callback = kempld_create_platform_device, 739 }, { 740 .ident = "CNTG", 741 .matches = { 742 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 743 DMI_MATCH(DMI_BOARD_NAME, "COMe-bPC2"), 744 }, 745 .driver_data = (void *)&kempld_platform_data_generic, 746 .callback = kempld_create_platform_device, 747 }, { 748 .ident = "CNTX", 749 .matches = { 750 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 751 DMI_MATCH(DMI_BOARD_NAME, "PXT"), 752 }, 753 .driver_data = (void *)&kempld_platform_data_generic, 754 .callback = kempld_create_platform_device, 755 }, { 756 .ident = "CSL6", 757 .matches = { 758 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 759 DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"), 760 }, 761 .driver_data = (void *)&kempld_platform_data_generic, 762 .callback = kempld_create_platform_device, 763 }, { 764 .ident = "CVV6", 765 .matches = { 766 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 767 DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"), 768 }, 769 .driver_data = (void *)&kempld_platform_data_generic, 770 .callback = kempld_create_platform_device, 771 }, { 772 .ident = "FRI2", 773 .matches = { 774 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 775 DMI_MATCH(DMI_BIOS_VERSION, "FRI2"), 776 }, 777 .driver_data = (void *)&kempld_platform_data_generic, 778 .callback = kempld_create_platform_device, 779 }, { 780 .ident = "FRI2", 781 .matches = { 782 DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"), 783 }, 784 .driver_data = (void *)&kempld_platform_data_generic, 785 .callback = kempld_create_platform_device, 786 }, { 787 .ident = "A203", 788 .matches = { 789 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 790 DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"), 791 }, 792 .driver_data = (void *)&kempld_platform_data_generic, 793 .callback = kempld_create_platform_device, 794 }, { 795 .ident = "M4A1", 796 .matches = { 797 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 798 DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"), 799 }, 800 .driver_data = (void *)&kempld_platform_data_generic, 801 .callback = kempld_create_platform_device, 802 }, { 803 .ident = "MAL1", 804 .matches = { 805 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 806 DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"), 807 }, 808 .driver_data = (void *)&kempld_platform_data_generic, 809 .callback = kempld_create_platform_device, 810 }, { 811 .ident = "MAPL", 812 .matches = { 813 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 814 DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"), 815 }, 816 .driver_data = (void *)&kempld_platform_data_generic, 817 .callback = kempld_create_platform_device, 818 }, { 819 .ident = "MBR1", 820 .matches = { 821 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 822 DMI_MATCH(DMI_BOARD_NAME, "ETX-OH"), 823 }, 824 .driver_data = (void *)&kempld_platform_data_generic, 825 .callback = kempld_create_platform_device, 826 }, { 827 .ident = "MVV1", 828 .matches = { 829 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 830 DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"), 831 }, 832 .driver_data = (void *)&kempld_platform_data_generic, 833 .callback = kempld_create_platform_device, 834 }, { 835 .ident = "NTC1", 836 .matches = { 837 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 838 DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"), 839 }, 840 .driver_data = (void *)&kempld_platform_data_generic, 841 .callback = kempld_create_platform_device, 842 }, { 843 .ident = "NTC1", 844 .matches = { 845 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 846 DMI_MATCH(DMI_BOARD_NAME, "nETXe-TT"), 847 }, 848 .driver_data = (void *)&kempld_platform_data_generic, 849 .callback = kempld_create_platform_device, 850 }, { 851 .ident = "NTC1", 852 .matches = { 853 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 854 DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"), 855 }, 856 .driver_data = (void *)&kempld_platform_data_generic, 857 .callback = kempld_create_platform_device, 858 }, { 859 .ident = "NUP1", 860 .matches = { 861 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 862 DMI_MATCH(DMI_BOARD_NAME, "COMe-mCT"), 863 }, 864 .driver_data = (void *)&kempld_platform_data_generic, 865 .callback = kempld_create_platform_device, 866 }, { 867 .ident = "PAPL", 868 .matches = { 869 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 870 DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"), 871 }, 872 .driver_data = (void *)&kempld_platform_data_generic, 873 .callback = kempld_create_platform_device, 874 }, { 875 .ident = "SXAL", 876 .matches = { 877 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 878 DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"), 879 }, 880 .driver_data = (void *)&kempld_platform_data_generic, 881 .callback = kempld_create_platform_device, 882 }, { 883 .ident = "SXAL4", 884 .matches = { 885 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 886 DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"), 887 }, 888 .driver_data = (void *)&kempld_platform_data_generic, 889 .callback = kempld_create_platform_device, 890 }, { 891 .ident = "UNP1", 892 .matches = { 893 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 894 DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-DC"), 895 }, 896 .driver_data = (void *)&kempld_platform_data_generic, 897 .callback = kempld_create_platform_device, 898 }, { 899 .ident = "UNP1", 900 .matches = { 901 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 902 DMI_MATCH(DMI_BOARD_NAME, "COMe-cDC2"), 903 }, 904 .driver_data = (void *)&kempld_platform_data_generic, 905 .callback = kempld_create_platform_device, 906 }, { 907 .ident = "UNTG", 908 .matches = { 909 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 910 DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-PC"), 911 }, 912 .driver_data = (void *)&kempld_platform_data_generic, 913 .callback = kempld_create_platform_device, 914 }, { 915 .ident = "UNTG", 916 .matches = { 917 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 918 DMI_MATCH(DMI_BOARD_NAME, "COMe-cPC2"), 919 }, 920 .driver_data = (void *)&kempld_platform_data_generic, 921 .callback = kempld_create_platform_device, 922 }, { 923 .ident = "UUP6", 924 .matches = { 925 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 926 DMI_MATCH(DMI_BOARD_NAME, "COMe-cCT6"), 927 }, 928 .driver_data = (void *)&kempld_platform_data_generic, 929 .callback = kempld_create_platform_device, 930 }, { 931 .ident = "UTH6", 932 .matches = { 933 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 934 DMI_MATCH(DMI_BOARD_NAME, "COMe-cTH6"), 935 }, 936 .driver_data = (void *)&kempld_platform_data_generic, 937 .callback = kempld_create_platform_device, 938 }, { 939 .ident = "Q7AL", 940 .matches = { 941 DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), 942 DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"), 943 }, 944 .driver_data = (void *)&kempld_platform_data_generic, 945 .callback = kempld_create_platform_device, 946 }, 947 {} 948}; 949MODULE_DEVICE_TABLE(dmi, kempld_dmi_table); 950 951static int __init kempld_init(void) 952{ 953 const struct dmi_system_id *id; 954 955 if (force_device_id[0]) { 956 for (id = kempld_dmi_table; 957 id->matches[0].slot != DMI_NONE; id++) 958 if (strstr(id->ident, force_device_id)) 959 if (id->callback && !id->callback(id)) 960 break; 961 if (id->matches[0].slot == DMI_NONE) 962 return -ENODEV; 963 } else { 964 dmi_check_system(kempld_dmi_table); 965 } 966 967 return platform_driver_register(&kempld_driver); 968} 969 970static void __exit kempld_exit(void) 971{ 972 if (kempld_pdev) 973 platform_device_unregister(kempld_pdev); 974 975 platform_driver_unregister(&kempld_driver); 976} 977 978module_init(kempld_init); 979module_exit(kempld_exit); 980 981MODULE_DESCRIPTION("KEM PLD Core Driver"); 982MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); 983MODULE_LICENSE("GPL"); 984MODULE_ALIAS("platform:kempld-core");