Kconfig (2863B)
1# SPDX-License-Identifier: GPL-2.0-only 2# 3# MMC core configuration 4# 5config PWRSEQ_EMMC 6 tristate "HW reset support for eMMC" 7 default y 8 depends on OF 9 help 10 This selects Hardware reset support aka pwrseq-emmc for eMMC 11 devices. By default this option is set to y. 12 13 This driver can also be built as a module. If so, the module 14 will be called pwrseq_emmc. 15 16config PWRSEQ_SD8787 17 tristate "HW reset support for SD8787 BT + Wifi module" 18 depends on OF && (MWIFIEX || BT_MRVL_SDIO || LIBERTAS_SDIO || WILC1000_SDIO) 19 help 20 This selects hardware reset support for the SD8787 BT + Wifi 21 module. By default this option is set to n. 22 23 This driver can also be built as a module. If so, the module 24 will be called pwrseq_sd8787. 25 26config PWRSEQ_SIMPLE 27 tristate "Simple HW reset support for MMC" 28 default y 29 depends on OF 30 help 31 This selects simple hardware reset support aka pwrseq-simple for MMC 32 devices. By default this option is set to y. 33 34 This driver can also be built as a module. If so, the module 35 will be called pwrseq_simple. 36 37config MMC_BLOCK 38 tristate "MMC block device driver" 39 depends on BLOCK 40 default y 41 help 42 Say Y here to enable the MMC block device driver support. 43 This provides a block device driver, which you can use to 44 mount the filesystem. Almost everyone wishing MMC support 45 should say Y or M here. 46 47config MMC_BLOCK_MINORS 48 int "Number of minors per block device" 49 depends on MMC_BLOCK 50 range 4 256 51 default 8 52 help 53 Number of minors per block device. One is needed for every 54 partition on the disk (plus one for the whole disk). 55 56 Number of total MMC minors available is 256, so your number 57 of supported block devices will be limited to 256 divided 58 by this number. 59 60 Default is 8 to be backwards compatible with previous 61 hardwired device numbering. 62 63 If unsure, say 8 here. 64 65config SDIO_UART 66 tristate "SDIO UART/GPS class support" 67 depends on TTY 68 help 69 SDIO function driver for SDIO cards that implements the UART 70 class, as well as the GPS class which appears like a UART. 71 72config MMC_TEST 73 tristate "MMC host test driver" 74 help 75 Development driver that performs a series of reads and writes 76 to a memory card in order to expose certain well known bugs 77 in host controllers. The tests are executed by writing to the 78 "test" file in debugfs under each card. Note that whatever is 79 on your card will be overwritten by these tests. 80 81 This driver is only of interest to those developing or 82 testing a host driver. Most people should say N here. 83 84config MMC_CRYPTO 85 bool "MMC Crypto Engine Support" 86 depends on BLK_INLINE_ENCRYPTION 87 help 88 Enable Crypto Engine Support in MMC. 89 Enabling this makes it possible for the kernel to use the crypto 90 capabilities of the MMC device (if present) to perform crypto 91 operations on data being transferred to/from the device.