docg3.h (9397B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Handles the M-Systems DiskOnChip G3 chip 4 * 5 * Copyright (C) 2011 Robert Jarzmik 6 */ 7 8#ifndef _MTD_DOCG3_H 9#define _MTD_DOCG3_H 10 11#include <linux/mtd/mtd.h> 12 13/* 14 * Flash memory areas : 15 * - 0x0000 .. 0x07ff : IPL 16 * - 0x0800 .. 0x0fff : Data area 17 * - 0x1000 .. 0x17ff : Registers 18 * - 0x1800 .. 0x1fff : Unknown 19 */ 20#define DOC_IOSPACE_IPL 0x0000 21#define DOC_IOSPACE_DATA 0x0800 22#define DOC_IOSPACE_SIZE 0x2000 23 24/* 25 * DOC G3 layout and adressing scheme 26 * A page address for the block "b", plane "P" and page "p": 27 * address = [bbbb bPpp pppp] 28 */ 29 30#define DOC_ADDR_PAGE_MASK 0x3f 31#define DOC_ADDR_BLOCK_SHIFT 6 32#define DOC_LAYOUT_NBPLANES 2 33#define DOC_LAYOUT_PAGES_PER_BLOCK 64 34#define DOC_LAYOUT_PAGE_SIZE 512 35#define DOC_LAYOUT_OOB_SIZE 16 36#define DOC_LAYOUT_WEAR_SIZE 8 37#define DOC_LAYOUT_PAGE_OOB_SIZE \ 38 (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE) 39#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2) 40#define DOC_LAYOUT_BLOCK_SIZE \ 41 (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE) 42 43/* 44 * ECC related constants 45 */ 46#define DOC_ECC_BCH_M 14 47#define DOC_ECC_BCH_T 4 48#define DOC_ECC_BCH_PRIMPOLY 0x4443 49#define DOC_ECC_BCH_SIZE 7 50#define DOC_ECC_BCH_COVERED_BYTES \ 51 (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \ 52 DOC_LAYOUT_OOB_HAMMING_SZ) 53#define DOC_ECC_BCH_TOTAL_BYTES \ 54 (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ) 55 56/* 57 * Blocks distribution 58 */ 59#define DOC_LAYOUT_BLOCK_BBT 0 60#define DOC_LAYOUT_BLOCK_OTP 0 61#define DOC_LAYOUT_BLOCK_FIRST_DATA 6 62 63#define DOC_LAYOUT_PAGE_BBT 4 64 65/* 66 * Extra page OOB (16 bytes wide) layout 67 */ 68#define DOC_LAYOUT_OOB_PAGEINFO_OFS 0 69#define DOC_LAYOUT_OOB_HAMMING_OFS 7 70#define DOC_LAYOUT_OOB_BCH_OFS 8 71#define DOC_LAYOUT_OOB_UNUSED_OFS 15 72#define DOC_LAYOUT_OOB_PAGEINFO_SZ 7 73#define DOC_LAYOUT_OOB_HAMMING_SZ 1 74#define DOC_LAYOUT_OOB_BCH_SZ 7 75#define DOC_LAYOUT_OOB_UNUSED_SZ 1 76 77 78#define DOC_CHIPID_G3 0x200 79#define DOC_ERASE_MARK 0xaa 80#define DOC_MAX_NBFLOORS 4 81/* 82 * Flash registers 83 */ 84#define DOC_CHIPID 0x1000 85#define DOC_TEST 0x1004 86#define DOC_BUSLOCK 0x1006 87#define DOC_ENDIANCONTROL 0x1008 88#define DOC_DEVICESELECT 0x100a 89#define DOC_ASICMODE 0x100c 90#define DOC_CONFIGURATION 0x100e 91#define DOC_INTERRUPTCONTROL 0x1010 92#define DOC_READADDRESS 0x101a 93#define DOC_DATAEND 0x101e 94#define DOC_INTERRUPTSTATUS 0x1020 95 96#define DOC_FLASHSEQUENCE 0x1032 97#define DOC_FLASHCOMMAND 0x1034 98#define DOC_FLASHADDRESS 0x1036 99#define DOC_FLASHCONTROL 0x1038 100#define DOC_NOP 0x103e 101 102#define DOC_ECCCONF0 0x1040 103#define DOC_ECCCONF1 0x1042 104#define DOC_ECCPRESET 0x1044 105#define DOC_HAMMINGPARITY 0x1046 106#define DOC_BCH_HW_ECC(idx) (0x1048 + idx) 107 108#define DOC_PROTECTION 0x1056 109#define DOC_DPS0_KEY 0x105c 110#define DOC_DPS1_KEY 0x105e 111#define DOC_DPS0_ADDRLOW 0x1060 112#define DOC_DPS0_ADDRHIGH 0x1062 113#define DOC_DPS1_ADDRLOW 0x1064 114#define DOC_DPS1_ADDRHIGH 0x1066 115#define DOC_DPS0_STATUS 0x106c 116#define DOC_DPS1_STATUS 0x106e 117 118#define DOC_ASICMODECONFIRM 0x1072 119#define DOC_CHIPID_INV 0x1074 120#define DOC_POWERMODE 0x107c 121 122/* 123 * Flash sequences 124 * A sequence is preset before one or more commands are input to the chip. 125 */ 126#define DOC_SEQ_RESET 0x00 127#define DOC_SEQ_PAGE_SIZE_532 0x03 128#define DOC_SEQ_SET_FASTMODE 0x05 129#define DOC_SEQ_SET_RELIABLEMODE 0x09 130#define DOC_SEQ_READ 0x12 131#define DOC_SEQ_SET_PLANE1 0x0e 132#define DOC_SEQ_SET_PLANE2 0x10 133#define DOC_SEQ_PAGE_SETUP 0x1d 134#define DOC_SEQ_ERASE 0x27 135#define DOC_SEQ_PLANES_STATUS 0x31 136 137/* 138 * Flash commands 139 */ 140#define DOC_CMD_READ_PLANE1 0x00 141#define DOC_CMD_SET_ADDR_READ 0x05 142#define DOC_CMD_READ_ALL_PLANES 0x30 143#define DOC_CMD_READ_PLANE2 0x50 144#define DOC_CMD_READ_FLASH 0xe0 145#define DOC_CMD_PAGE_SIZE_532 0x3c 146 147#define DOC_CMD_PROG_BLOCK_ADDR 0x60 148#define DOC_CMD_PROG_CYCLE1 0x80 149#define DOC_CMD_PROG_CYCLE2 0x10 150#define DOC_CMD_PROG_CYCLE3 0x11 151#define DOC_CMD_ERASECYCLE2 0xd0 152#define DOC_CMD_READ_STATUS 0x70 153#define DOC_CMD_PLANES_STATUS 0x71 154 155#define DOC_CMD_RELIABLE_MODE 0x22 156#define DOC_CMD_FAST_MODE 0xa2 157 158#define DOC_CMD_RESET 0xff 159 160/* 161 * Flash register : DOC_FLASHCONTROL 162 */ 163#define DOC_CTRL_VIOLATION 0x20 164#define DOC_CTRL_CE 0x10 165#define DOC_CTRL_UNKNOWN_BITS 0x08 166#define DOC_CTRL_PROTECTION_ERROR 0x04 167#define DOC_CTRL_SEQUENCE_ERROR 0x02 168#define DOC_CTRL_FLASHREADY 0x01 169 170/* 171 * Flash register : DOC_ASICMODE 172 */ 173#define DOC_ASICMODE_RESET 0x00 174#define DOC_ASICMODE_NORMAL 0x01 175#define DOC_ASICMODE_POWERDOWN 0x02 176#define DOC_ASICMODE_MDWREN 0x04 177#define DOC_ASICMODE_BDETCT_RESET 0x08 178#define DOC_ASICMODE_RSTIN_RESET 0x10 179#define DOC_ASICMODE_RAM_WE 0x20 180 181/* 182 * Flash register : DOC_ECCCONF0 183 */ 184#define DOC_ECCCONF0_WRITE_MODE 0x0000 185#define DOC_ECCCONF0_READ_MODE 0x8000 186#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000 187#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000 188#define DOC_ECCCONF0_BCH_ENABLE 0x0800 189#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff 190 191/* 192 * Flash register : DOC_ECCCONF1 193 */ 194#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 195#define DOC_ECCCONF1_UNKOWN1 0x40 196#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 197#define DOC_ECCCONF1_UNKOWN3 0x10 198#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f 199 200/* 201 * Flash register : DOC_PROTECTION 202 */ 203#define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01 204#define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02 205#define DOC_PROTECT_LOCK_INPUT 0x04 206#define DOC_PROTECT_STICKY_LOCK 0x08 207#define DOC_PROTECT_PROTECTION_ENABLED 0x10 208#define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20 209#define DOC_PROTECT_PROTECTION_ERROR 0x80 210 211/* 212 * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS 213 */ 214#define DOC_DPS_OTP_PROTECTED 0x01 215#define DOC_DPS_READ_PROTECTED 0x02 216#define DOC_DPS_WRITE_PROTECTED 0x04 217#define DOC_DPS_HW_LOCK_ENABLED 0x08 218#define DOC_DPS_KEY_OK 0x80 219 220/* 221 * Flash register : DOC_CONFIGURATION 222 */ 223#define DOC_CONF_IF_CFG 0x80 224#define DOC_CONF_MAX_ID_MASK 0x30 225#define DOC_CONF_VCCQ_3V 0x01 226 227/* 228 * Flash register : DOC_READADDRESS 229 */ 230#define DOC_READADDR_INC 0x8000 231#define DOC_READADDR_ONE_BYTE 0x4000 232#define DOC_READADDR_ADDR_MASK 0x1fff 233 234/* 235 * Flash register : DOC_POWERMODE 236 */ 237#define DOC_POWERDOWN_READY 0x80 238 239/* 240 * Status of erase and write operation 241 */ 242#define DOC_PLANES_STATUS_FAIL 0x01 243#define DOC_PLANES_STATUS_PLANE0_KO 0x02 244#define DOC_PLANES_STATUS_PLANE1_KO 0x04 245 246/* 247 * DPS key management 248 * 249 * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span 250 * across block boundaries, and define whether these blocks can be read or 251 * written. 252 * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and 253 * page 0 of blocks (4,5) for DPS1. 254 */ 255#define DOC_LAYOUT_DPS_KEY_LENGTH 8 256 257/** 258 * struct docg3_cascade - Cascade of 1 to 4 docg3 chips 259 * @floors: floors (ie. one physical docg3 chip is one floor) 260 * @base: IO space to access all chips in the cascade 261 * @bch: the BCH correcting control structure 262 * @lock: lock to protect docg3 IO space from concurrent accesses 263 */ 264struct docg3_cascade { 265 struct mtd_info *floors[DOC_MAX_NBFLOORS]; 266 void __iomem *base; 267 struct bch_control *bch; 268 struct mutex lock; 269}; 270 271/** 272 * struct docg3 - DiskOnChip driver private data 273 * @dev: the device currently under control 274 * @cascade: the cascade this device belongs to 275 * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3) 276 * @if_cfg: if true, reads are on 16bits, else reads are on 8bits 277 278 * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in 279 * reliable mode 280 * Fast mode implies more errors than normal mode. 281 * Reliable mode implies that page 2*n and 2*n+1 are clones. 282 * @bbt: bad block table cache 283 * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next 284 * page_write) 285 * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC 286 * if 0, use all the 16 bytes. 287 * @oob_write_buf: prepared OOB for next page_write 288 */ 289struct docg3 { 290 struct device *dev; 291 struct docg3_cascade *cascade; 292 unsigned int device_id:4; 293 unsigned int if_cfg:1; 294 unsigned int reliable:2; 295 int max_block; 296 u8 *bbt; 297 loff_t oob_write_ofs; 298 int oob_autoecc; 299 u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE]; 300}; 301 302#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg) 303#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg) 304#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg) 305#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg) 306#endif 307 308/* 309 * Trace events part 310 */ 311#undef TRACE_SYSTEM 312#define TRACE_SYSTEM docg3 313 314#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ) 315#define _MTD_DOCG3_TRACE 316 317#include <linux/tracepoint.h> 318 319TRACE_EVENT(docg3_io, 320 TP_PROTO(int op, int width, u16 reg, int val), 321 TP_ARGS(op, width, reg, val), 322 TP_STRUCT__entry( 323 __field(int, op) 324 __field(unsigned char, width) 325 __field(u16, reg) 326 __field(int, val)), 327 TP_fast_assign( 328 __entry->op = op; 329 __entry->width = width; 330 __entry->reg = reg; 331 __entry->val = val;), 332 TP_printk("docg3: %s%02d reg=%04x, val=%04x", 333 __entry->op ? "write" : "read", __entry->width, 334 __entry->reg, __entry->val) 335 ); 336#endif 337 338/* This part must be outside protection */ 339#undef TRACE_INCLUDE_PATH 340#undef TRACE_INCLUDE_FILE 341#define TRACE_INCLUDE_PATH . 342#define TRACE_INCLUDE_FILE docg3 343#include <trace/define_trace.h>