cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

arc-rawmode.c (4945B)


      1/*
      2 * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
      3 *
      4 * Written 1994-1999 by Avery Pennarun.
      5 * Derived from skeleton.c by Donald Becker.
      6 *
      7 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
      8 *  for sponsoring the further development of this driver.
      9 *
     10 * **********************
     11 *
     12 * The original copyright of skeleton.c was as follows:
     13 *
     14 * skeleton.c Written 1993 by Donald Becker.
     15 * Copyright 1993 United States Government as represented by the
     16 * Director, National Security Agency.  This software may only be used
     17 * and distributed according to the terms of the GNU General Public License as
     18 * modified by SRC, incorporated herein by reference.
     19 *
     20 * **********************
     21 *
     22 * For more details, see drivers/net/arcnet.c
     23 *
     24 * **********************
     25 */
     26
     27#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
     28
     29#include <linux/module.h>
     30#include <linux/gfp.h>
     31#include <linux/init.h>
     32#include <linux/if_arp.h>
     33#include <net/arp.h>
     34#include <linux/netdevice.h>
     35#include <linux/skbuff.h>
     36#include "arcdevice.h"
     37
     38/* packet receiver */
     39static void rx(struct net_device *dev, int bufnum,
     40	       struct archdr *pkthdr, int length)
     41{
     42	struct arcnet_local *lp = netdev_priv(dev);
     43	struct sk_buff *skb;
     44	struct archdr *pkt = pkthdr;
     45	int ofs;
     46
     47	arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
     48
     49	if (length > MTU)
     50		ofs = 512 - length;
     51	else
     52		ofs = 256 - length;
     53
     54	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
     55	if (!skb) {
     56		dev->stats.rx_dropped++;
     57		return;
     58	}
     59	skb_put(skb, length + ARC_HDR_SIZE);
     60	skb->dev = dev;
     61
     62	pkt = (struct archdr *)skb->data;
     63
     64	skb_reset_mac_header(skb);
     65	skb_pull(skb, ARC_HDR_SIZE);
     66
     67	/* up to sizeof(pkt->soft) has already been copied from the card */
     68	memcpy(pkt, pkthdr, sizeof(struct archdr));
     69	if (length > sizeof(pkt->soft))
     70		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
     71				      pkt->soft.raw + sizeof(pkt->soft),
     72				      length - sizeof(pkt->soft));
     73
     74	if (BUGLVL(D_SKB))
     75		arcnet_dump_skb(dev, skb, "rx");
     76
     77	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
     78	netif_rx(skb);
     79}
     80
     81/* Create the ARCnet hard/soft headers for raw mode.
     82 * There aren't any soft headers in raw mode - not even the protocol id.
     83 */
     84static int build_header(struct sk_buff *skb, struct net_device *dev,
     85			unsigned short type, uint8_t daddr)
     86{
     87	int hdr_size = ARC_HDR_SIZE;
     88	struct archdr *pkt = skb_push(skb, hdr_size);
     89
     90	/* Set the source hardware address.
     91	 *
     92	 * This is pretty pointless for most purposes, but it can help in
     93	 * debugging.  ARCnet does not allow us to change the source address
     94	 * in the actual packet sent.
     95	 */
     96	pkt->hard.source = *dev->dev_addr;
     97
     98	/* see linux/net/ethernet/eth.c to see where I got the following */
     99
    100	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
    101		/* FIXME: fill in the last byte of the dest ipaddr here
    102		 * to better comply with RFC1051 in "noarp" mode.
    103		 */
    104		pkt->hard.dest = 0;
    105		return hdr_size;
    106	}
    107	/* otherwise, just fill it in and go! */
    108	pkt->hard.dest = daddr;
    109
    110	return hdr_size;	/* success */
    111}
    112
    113static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
    114		      int bufnum)
    115{
    116	struct arcnet_local *lp = netdev_priv(dev);
    117	struct arc_hardware *hard = &pkt->hard;
    118	int ofs;
    119
    120	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
    121		   lp->next_tx, lp->cur_tx, bufnum);
    122
    123	/* hard header is not included in packet length */
    124	length -= ARC_HDR_SIZE;
    125
    126	if (length > XMTU) {
    127		/* should never happen! other people already check for this. */
    128		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
    129			   length, XMTU);
    130		length = XMTU;
    131	}
    132	if (length >= MinTU) {
    133		hard->offset[0] = 0;
    134		hard->offset[1] = ofs = 512 - length;
    135	} else if (length > MTU) {
    136		hard->offset[0] = 0;
    137		hard->offset[1] = ofs = 512 - length - 3;
    138	} else {
    139		hard->offset[0] = ofs = 256 - length;
    140	}
    141
    142	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
    143		   length, ofs);
    144
    145	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
    146	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
    147
    148	lp->lastload_dest = hard->dest;
    149
    150	return 1;		/* done */
    151}
    152
    153static struct ArcProto rawmode_proto = {
    154	.suffix		= 'r',
    155	.mtu		= XMTU,
    156	.rx		= rx,
    157	.build_header	= build_header,
    158	.prepare_tx	= prepare_tx,
    159	.continue_tx    = NULL,
    160	.ack_tx         = NULL
    161};
    162
    163static int __init arcnet_raw_init(void)
    164{
    165	int count;
    166
    167	pr_info("raw mode (`r') encapsulation support loaded\n");
    168
    169	for (count = 0; count < 256; count++)
    170		if (arc_proto_map[count] == arc_proto_default)
    171			arc_proto_map[count] = &rawmode_proto;
    172
    173	/* for raw mode, we only set the bcast proto if there's no better one */
    174	if (arc_bcast_proto == arc_proto_default)
    175		arc_bcast_proto = &rawmode_proto;
    176
    177	arc_proto_default = &rawmode_proto;
    178	return 0;
    179}
    180
    181static void __exit arcnet_raw_exit(void)
    182{
    183	arcnet_unregister_proto(&rawmode_proto);
    184}
    185
    186module_init(arcnet_raw_init);
    187module_exit(arcnet_raw_exit);
    188
    189MODULE_LICENSE("GPL");