altera_sgdmahw.h (3413B)
1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* Altera TSE SGDMA and MSGDMA Linux driver 3 * Copyright (C) 2014 Altera Corporation. All rights reserved 4 */ 5 6#ifndef __ALTERA_SGDMAHW_H__ 7#define __ALTERA_SGDMAHW_H__ 8 9/* SGDMA descriptor structure */ 10struct sgdma_descrip { 11 u32 raddr; /* address of data to be read */ 12 u32 pad1; 13 u32 waddr; 14 u32 pad2; 15 u32 next; 16 u32 pad3; 17 u16 bytes; 18 u8 rburst; 19 u8 wburst; 20 u16 bytes_xferred; /* 16 bits, bytes xferred */ 21 22 /* bit 0: error 23 * bit 1: length error 24 * bit 2: crc error 25 * bit 3: truncated error 26 * bit 4: phy error 27 * bit 5: collision error 28 * bit 6: reserved 29 * bit 7: status eop for recv case 30 */ 31 u8 status; 32 33 /* bit 0: eop 34 * bit 1: read_fixed 35 * bit 2: write fixed 36 * bits 3,4,5,6: Channel (always 0) 37 * bit 7: hardware owned 38 */ 39 u8 control; 40} __packed; 41 42#define SGDMA_DESC_LEN sizeof(struct sgdma_descrip) 43 44#define SGDMA_STATUS_ERR BIT(0) 45#define SGDMA_STATUS_LENGTH_ERR BIT(1) 46#define SGDMA_STATUS_CRC_ERR BIT(2) 47#define SGDMA_STATUS_TRUNC_ERR BIT(3) 48#define SGDMA_STATUS_PHY_ERR BIT(4) 49#define SGDMA_STATUS_COLL_ERR BIT(5) 50#define SGDMA_STATUS_EOP BIT(7) 51 52#define SGDMA_CONTROL_EOP BIT(0) 53#define SGDMA_CONTROL_RD_FIXED BIT(1) 54#define SGDMA_CONTROL_WR_FIXED BIT(2) 55 56/* Channel is always 0, so just zero initialize it */ 57 58#define SGDMA_CONTROL_HW_OWNED BIT(7) 59 60/* SGDMA register space */ 61struct sgdma_csr { 62 /* bit 0: error 63 * bit 1: eop 64 * bit 2: descriptor completed 65 * bit 3: chain completed 66 * bit 4: busy 67 * remainder reserved 68 */ 69 u32 status; 70 u32 pad1[3]; 71 72 /* bit 0: interrupt on error 73 * bit 1: interrupt on eop 74 * bit 2: interrupt after every descriptor 75 * bit 3: interrupt after last descrip in a chain 76 * bit 4: global interrupt enable 77 * bit 5: starts descriptor processing 78 * bit 6: stop core on dma error 79 * bit 7: interrupt on max descriptors 80 * bits 8-15: max descriptors to generate interrupt 81 * bit 16: Software reset 82 * bit 17: clears owned by hardware if 0, does not clear otherwise 83 * bit 18: enables descriptor polling mode 84 * bit 19-26: clocks before polling again 85 * bit 27-30: reserved 86 * bit 31: clear interrupt 87 */ 88 u32 control; 89 u32 pad2[3]; 90 u32 next_descrip; 91 u32 pad3[3]; 92}; 93 94#define sgdma_csroffs(a) (offsetof(struct sgdma_csr, a)) 95#define sgdma_descroffs(a) (offsetof(struct sgdma_descrip, a)) 96 97#define SGDMA_STSREG_ERR BIT(0) /* Error */ 98#define SGDMA_STSREG_EOP BIT(1) /* EOP */ 99#define SGDMA_STSREG_DESCRIP BIT(2) /* Descriptor completed */ 100#define SGDMA_STSREG_CHAIN BIT(3) /* Chain completed */ 101#define SGDMA_STSREG_BUSY BIT(4) /* Controller busy */ 102 103#define SGDMA_CTRLREG_IOE BIT(0) /* Interrupt on error */ 104#define SGDMA_CTRLREG_IOEOP BIT(1) /* Interrupt on EOP */ 105#define SGDMA_CTRLREG_IDESCRIP BIT(2) /* Interrupt after every descriptor */ 106#define SGDMA_CTRLREG_ILASTD BIT(3) /* Interrupt after last descriptor */ 107#define SGDMA_CTRLREG_INTEN BIT(4) /* Global Interrupt enable */ 108#define SGDMA_CTRLREG_START BIT(5) /* starts descriptor processing */ 109#define SGDMA_CTRLREG_STOPERR BIT(6) /* stop on dma error */ 110#define SGDMA_CTRLREG_INTMAX BIT(7) /* Interrupt on max descriptors */ 111#define SGDMA_CTRLREG_RESET BIT(16)/* Software reset */ 112#define SGDMA_CTRLREG_COBHW BIT(17)/* Clears owned by hardware */ 113#define SGDMA_CTRLREG_POLL BIT(18)/* enables descriptor polling mode */ 114#define SGDMA_CTRLREG_CLRINT BIT(31)/* Clears interrupt */ 115 116#endif /* __ALTERA_SGDMAHW_H__ */