cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

hplance.c (6748B)


      1// SPDX-License-Identifier: GPL-2.0-only
      2/* hplance.c  : the  Linux/hp300/lance ethernet driver
      3 *
      4 * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
      5 * Based on the Sun Lance driver and the NetBSD HP Lance driver
      6 * Uses the generic 7990.c LANCE code.
      7 */
      8
      9#include <linux/module.h>
     10#include <linux/kernel.h>
     11#include <linux/types.h>
     12#include <linux/interrupt.h>
     13#include <linux/ioport.h>
     14#include <linux/string.h>
     15#include <linux/delay.h>
     16#include <linux/init.h>
     17#include <linux/errno.h>
     18#include <linux/pgtable.h>
     19/* Used for the temporal inet entries and routing */
     20#include <linux/socket.h>
     21#include <linux/route.h>
     22#include <linux/dio.h>
     23#include <linux/netdevice.h>
     24#include <linux/etherdevice.h>
     25#include <linux/skbuff.h>
     26
     27#include <asm/io.h>
     28
     29#include "hplance.h"
     30
     31/* We have 16392 bytes of RAM for the init block and buffers. This places
     32 * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx
     33 * buffers and 2 Tx buffers, it takes (8 + 2) * 1544 bytes.
     34 */
     35#define LANCE_LOG_TX_BUFFERS 1
     36#define LANCE_LOG_RX_BUFFERS 3
     37
     38#include "7990.h"                                 /* use generic LANCE code */
     39
     40/* Our private data structure */
     41struct hplance_private {
     42	struct lance_private lance;
     43};
     44
     45/* function prototypes... This is easy because all the grot is in the
     46 * generic LANCE support. All we have to support is probing for boards,
     47 * plus board-specific init, open and close actions.
     48 * Oh, and we need to tell the generic code how to read and write LANCE registers...
     49 */
     50static int hplance_init_one(struct dio_dev *d, const struct dio_device_id *ent);
     51static void hplance_init(struct net_device *dev, struct dio_dev *d);
     52static void hplance_remove_one(struct dio_dev *d);
     53static void hplance_writerap(void *priv, unsigned short value);
     54static void hplance_writerdp(void *priv, unsigned short value);
     55static unsigned short hplance_readrdp(void *priv);
     56static int hplance_open(struct net_device *dev);
     57static int hplance_close(struct net_device *dev);
     58
     59static struct dio_device_id hplance_dio_tbl[] = {
     60	{ DIO_ID_LAN },
     61	{ 0 }
     62};
     63
     64static struct dio_driver hplance_driver = {
     65	.name      = "hplance",
     66	.id_table  = hplance_dio_tbl,
     67	.probe     = hplance_init_one,
     68	.remove    = hplance_remove_one,
     69};
     70
     71static const struct net_device_ops hplance_netdev_ops = {
     72	.ndo_open		= hplance_open,
     73	.ndo_stop		= hplance_close,
     74	.ndo_start_xmit		= lance_start_xmit,
     75	.ndo_set_rx_mode	= lance_set_multicast,
     76	.ndo_validate_addr	= eth_validate_addr,
     77	.ndo_set_mac_address	= eth_mac_addr,
     78#ifdef CONFIG_NET_POLL_CONTROLLER
     79	.ndo_poll_controller	= lance_poll,
     80#endif
     81};
     82
     83/* Find all the HP Lance boards and initialise them... */
     84static int hplance_init_one(struct dio_dev *d, const struct dio_device_id *ent)
     85{
     86	struct net_device *dev;
     87	int err = -ENOMEM;
     88
     89	dev = alloc_etherdev(sizeof(struct hplance_private));
     90	if (!dev)
     91		goto out;
     92
     93	err = -EBUSY;
     94	if (!request_mem_region(dio_resource_start(d),
     95				dio_resource_len(d), d->name))
     96		goto out_free_netdev;
     97
     98	hplance_init(dev, d);
     99	err = register_netdev(dev);
    100	if (err)
    101		goto out_release_mem_region;
    102
    103	dio_set_drvdata(d, dev);
    104
    105	printk(KERN_INFO "%s: %s; select code %d, addr %pM, irq %d\n",
    106	       dev->name, d->name, d->scode, dev->dev_addr, d->ipl);
    107
    108	return 0;
    109
    110 out_release_mem_region:
    111	release_mem_region(dio_resource_start(d), dio_resource_len(d));
    112 out_free_netdev:
    113	free_netdev(dev);
    114 out:
    115	return err;
    116}
    117
    118static void hplance_remove_one(struct dio_dev *d)
    119{
    120	struct net_device *dev = dio_get_drvdata(d);
    121
    122	unregister_netdev(dev);
    123	release_mem_region(dio_resource_start(d), dio_resource_len(d));
    124	free_netdev(dev);
    125}
    126
    127/* Initialise a single lance board at the given DIO device */
    128static void hplance_init(struct net_device *dev, struct dio_dev *d)
    129{
    130	unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
    131	struct hplance_private *lp;
    132	u8 addr[ETH_ALEN];
    133	int i;
    134
    135	/* reset the board */
    136	out_8(va + DIO_IDOFF, 0xff);
    137	udelay(100);                              /* ariba! ariba! udelay! udelay! */
    138
    139	/* Fill the dev fields */
    140	dev->base_addr = va;
    141	dev->netdev_ops = &hplance_netdev_ops;
    142	dev->dma = 0;
    143
    144	for (i = 0; i < 6; i++) {
    145		/* The NVRAM holds our ethernet address, one nibble per byte,
    146		 * at bytes NVRAMOFF+1,3,5,7,9...
    147		 */
    148		addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)
    149			| (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);
    150	}
    151	eth_hw_addr_set(dev, addr);
    152
    153	lp = netdev_priv(dev);
    154	lp->lance.name = d->name;
    155	lp->lance.base = va;
    156	lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */
    157	lp->lance.lance_init_block = NULL;              /* LANCE addr of same RAM */
    158	lp->lance.busmaster_regval = LE_C3_BSWP;        /* we're bigendian */
    159	lp->lance.irq = d->ipl;
    160	lp->lance.writerap = hplance_writerap;
    161	lp->lance.writerdp = hplance_writerdp;
    162	lp->lance.readrdp = hplance_readrdp;
    163	lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;
    164	lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
    165	lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
    166	lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
    167}
    168
    169/* This is disgusting. We have to check the DIO status register for ack every
    170 * time we read or write the LANCE registers.
    171 */
    172static void hplance_writerap(void *priv, unsigned short value)
    173{
    174	struct lance_private *lp = (struct lance_private *)priv;
    175
    176	do {
    177		out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value);
    178	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
    179}
    180
    181static void hplance_writerdp(void *priv, unsigned short value)
    182{
    183	struct lance_private *lp = (struct lance_private *)priv;
    184
    185	do {
    186		out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value);
    187	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
    188}
    189
    190static unsigned short hplance_readrdp(void *priv)
    191{
    192	struct lance_private *lp = (struct lance_private *)priv;
    193	__u16 value;
    194
    195	do {
    196		value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP);
    197	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);
    198	return value;
    199}
    200
    201static int hplance_open(struct net_device *dev)
    202{
    203	int status;
    204	struct lance_private *lp = netdev_priv(dev);
    205
    206	status = lance_open(dev);                 /* call generic lance open code */
    207	if (status)
    208		return status;
    209	/* enable interrupts at board level. */
    210	out_8(lp->base + HPLANCE_STATUS, LE_IE);
    211
    212	return 0;
    213}
    214
    215static int hplance_close(struct net_device *dev)
    216{
    217	struct lance_private *lp = netdev_priv(dev);
    218
    219	out_8(lp->base + HPLANCE_STATUS, 0);	/* disable interrupts at boardlevel */
    220	lance_close(dev);
    221	return 0;
    222}
    223
    224static int __init hplance_init_module(void)
    225{
    226	return dio_register_driver(&hplance_driver);
    227}
    228
    229static void __exit hplance_cleanup_module(void)
    230{
    231	dio_unregister_driver(&hplance_driver);
    232}
    233
    234module_init(hplance_init_module);
    235module_exit(hplance_cleanup_module);
    236
    237MODULE_LICENSE("GPL");