espi.c (12714B)
1/***************************************************************************** 2 * * 3 * File: espi.c * 4 * $Revision: 1.14 $ * 5 * $Date: 2005/05/14 00:59:32 $ * 6 * Description: * 7 * Ethernet SPI functionality. * 8 * part of the Chelsio 10Gb Ethernet Driver. * 9 * * 10 * This program is free software; you can redistribute it and/or modify * 11 * it under the terms of the GNU General Public License, version 2, as * 12 * published by the Free Software Foundation. * 13 * * 14 * You should have received a copy of the GNU General Public License along * 15 * with this program; if not, see <http://www.gnu.org/licenses/>. * 16 * * 17 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * 18 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * 19 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * 20 * * 21 * http://www.chelsio.com * 22 * * 23 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * 24 * All rights reserved. * 25 * * 26 * Maintainers: maintainers@chelsio.com * 27 * * 28 * Authors: Dimitrios Michailidis <dm@chelsio.com> * 29 * Tina Yang <tainay@chelsio.com> * 30 * Felix Marti <felix@chelsio.com> * 31 * Scott Bardone <sbardone@chelsio.com> * 32 * Kurt Ottaway <kottaway@chelsio.com> * 33 * Frank DiMambro <frank@chelsio.com> * 34 * * 35 * History: * 36 * * 37 ****************************************************************************/ 38 39#include "common.h" 40#include "regs.h" 41#include "espi.h" 42 43struct peespi { 44 adapter_t *adapter; 45 struct espi_intr_counts intr_cnt; 46 u32 misc_ctrl; 47 spinlock_t lock; 48}; 49 50#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \ 51 F_RAMPARITYERR | F_DIP2PARITYERR) 52#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \ 53 | F_MONITORED_INTERFACE) 54 55#define TRICN_CNFG 14 56#define TRICN_CMD_READ 0x11 57#define TRICN_CMD_WRITE 0x21 58#define TRICN_CMD_ATTEMPTS 10 59 60static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, 61 int ch_addr, int reg_offset, u32 wr_data) 62{ 63 int busy, attempts = TRICN_CMD_ATTEMPTS; 64 65 writel(V_WRITE_DATA(wr_data) | 66 V_REGISTER_OFFSET(reg_offset) | 67 V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | 68 V_BUNDLE_ADDR(bundle_addr) | 69 V_SPI4_COMMAND(TRICN_CMD_WRITE), 70 adapter->regs + A_ESPI_CMD_ADDR); 71 writel(0, adapter->regs + A_ESPI_GOSTAT); 72 73 do { 74 busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; 75 } while (busy && --attempts); 76 77 if (busy) 78 pr_err("%s: TRICN write timed out\n", adapter->name); 79 80 return busy; 81} 82 83static int tricn_init(adapter_t *adapter) 84{ 85 int i, sme = 1; 86 87 if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) { 88 pr_err("%s: ESPI clock not ready\n", adapter->name); 89 return -1; 90 } 91 92 writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET); 93 94 if (sme) { 95 tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); 96 tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); 97 tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); 98 } 99 for (i = 1; i <= 8; i++) 100 tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); 101 for (i = 1; i <= 2; i++) 102 tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); 103 for (i = 1; i <= 3; i++) 104 tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); 105 tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1); 106 tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1); 107 tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1); 108 tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80); 109 tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1); 110 111 writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST, 112 adapter->regs + A_ESPI_RX_RESET); 113 114 return 0; 115} 116 117void t1_espi_intr_enable(struct peespi *espi) 118{ 119 u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); 120 121 /* 122 * Cannot enable ESPI interrupts on T1B because HW asserts the 123 * interrupt incorrectly, namely the driver gets ESPI interrupts 124 * but no data is actually dropped (can verify this reading the ESPI 125 * drop registers). Also, once the ESPI interrupt is asserted it 126 * cannot be cleared (HW bug). 127 */ 128 enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; 129 writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); 130 writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); 131} 132 133void t1_espi_intr_clear(struct peespi *espi) 134{ 135 readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); 136 writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); 137 writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); 138} 139 140void t1_espi_intr_disable(struct peespi *espi) 141{ 142 u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); 143 144 writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); 145 writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); 146} 147 148int t1_espi_intr_handler(struct peespi *espi) 149{ 150 u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); 151 152 if (status & F_DIP4ERR) 153 espi->intr_cnt.DIP4_err++; 154 if (status & F_RXDROP) 155 espi->intr_cnt.rx_drops++; 156 if (status & F_TXDROP) 157 espi->intr_cnt.tx_drops++; 158 if (status & F_RXOVERFLOW) 159 espi->intr_cnt.rx_ovflw++; 160 if (status & F_RAMPARITYERR) 161 espi->intr_cnt.parity_err++; 162 if (status & F_DIP2PARITYERR) { 163 espi->intr_cnt.DIP2_parity_err++; 164 165 /* 166 * Must read the error count to clear the interrupt 167 * that it causes. 168 */ 169 readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); 170 } 171 172 /* 173 * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we 174 * write the status as is. 175 */ 176 if (status && t1_is_T1B(espi->adapter)) 177 status = 1; 178 writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); 179 return 0; 180} 181 182const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) 183{ 184 return &espi->intr_cnt; 185} 186 187static void espi_setup_for_pm3393(adapter_t *adapter) 188{ 189 u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; 190 191 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); 192 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); 193 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); 194 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); 195 writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); 196 writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); 197 writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); 198 writel(0x08000008, adapter->regs + A_ESPI_TRAIN); 199 writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); 200} 201 202static void espi_setup_for_vsc7321(adapter_t *adapter) 203{ 204 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); 205 writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1); 206 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); 207 writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); 208 writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); 209 writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH); 210 writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG); 211 212 writel(0x08000008, adapter->regs + A_ESPI_TRAIN); 213} 214 215/* 216 * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. 217 */ 218static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) 219{ 220 writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH); 221 if (nports == 4) { 222 if (is_T2(adapter)) { 223 writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); 224 writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); 225 } else { 226 writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); 227 writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); 228 } 229 } else { 230 writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); 231 writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); 232 } 233 writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG); 234 235} 236 237int t1_espi_init(struct peespi *espi, int mac_type, int nports) 238{ 239 u32 status_enable_extra = 0; 240 adapter_t *adapter = espi->adapter; 241 242 /* Disable ESPI training. MACs that can handle it enable it below. */ 243 writel(0, adapter->regs + A_ESPI_TRAIN); 244 245 if (is_T2(adapter)) { 246 writel(V_OUT_OF_SYNC_COUNT(4) | 247 V_DIP2_PARITY_ERR_THRES(3) | 248 V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); 249 writel(nports == 4 ? 0x200040 : 0x1000080, 250 adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); 251 } else 252 writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); 253 254 if (mac_type == CHBT_MAC_PM3393) 255 espi_setup_for_pm3393(adapter); 256 else if (mac_type == CHBT_MAC_VSC7321) 257 espi_setup_for_vsc7321(adapter); 258 else if (mac_type == CHBT_MAC_IXF1010) { 259 status_enable_extra = F_INTEL1010MODE; 260 espi_setup_for_ixf1010(adapter, nports); 261 } else 262 return -1; 263 264 writel(status_enable_extra | F_RXSTATUSENABLE, 265 adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); 266 267 if (is_T2(adapter)) { 268 tricn_init(adapter); 269 /* 270 * Always position the control at the 1st port egress IN 271 * (sop,eop) counter to reduce PIOs for T/N210 workaround. 272 */ 273 espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL); 274 espi->misc_ctrl &= ~MON_MASK; 275 espi->misc_ctrl |= F_MONITORED_DIRECTION; 276 if (adapter->params.nports == 1) 277 espi->misc_ctrl |= F_MONITORED_INTERFACE; 278 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); 279 spin_lock_init(&espi->lock); 280 } 281 282 return 0; 283} 284 285void t1_espi_destroy(struct peespi *espi) 286{ 287 kfree(espi); 288} 289 290struct peespi *t1_espi_create(adapter_t *adapter) 291{ 292 struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL); 293 294 if (espi) 295 espi->adapter = adapter; 296 return espi; 297} 298 299#if 0 300void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) 301{ 302 struct peespi *espi = adapter->espi; 303 304 if (!is_T2(adapter)) 305 return; 306 spin_lock(&espi->lock); 307 espi->misc_ctrl = (val & ~MON_MASK) | 308 (espi->misc_ctrl & MON_MASK); 309 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); 310 spin_unlock(&espi->lock); 311} 312#endif /* 0 */ 313 314u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) 315{ 316 struct peespi *espi = adapter->espi; 317 u32 sel; 318 319 if (!is_T2(adapter)) 320 return 0; 321 322 sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); 323 if (!wait) { 324 if (!spin_trylock(&espi->lock)) 325 return 0; 326 } else 327 spin_lock(&espi->lock); 328 329 if ((sel != (espi->misc_ctrl & MON_MASK))) { 330 writel(((espi->misc_ctrl & ~MON_MASK) | sel), 331 adapter->regs + A_ESPI_MISC_CONTROL); 332 sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); 333 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); 334 } else 335 sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); 336 spin_unlock(&espi->lock); 337 return sel; 338} 339 340/* 341 * This function is for T204 only. 342 * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in 343 * one shot, since there is no per port counter on the out side. 344 */ 345int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait) 346{ 347 struct peespi *espi = adapter->espi; 348 u8 i, nport = (u8)adapter->params.nports; 349 350 if (!wait) { 351 if (!spin_trylock(&espi->lock)) 352 return -1; 353 } else 354 spin_lock(&espi->lock); 355 356 if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) { 357 espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) | 358 F_MONITORED_DIRECTION; 359 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); 360 } 361 for (i = 0 ; i < nport; i++, valp++) { 362 if (i) { 363 writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i), 364 adapter->regs + A_ESPI_MISC_CONTROL); 365 } 366 *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3); 367 } 368 369 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); 370 spin_unlock(&espi->lock); 371 return 0; 372}