80003es2lan.h (2558B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* Copyright(c) 1999 - 2018 Intel Corporation. */ 3 4#ifndef _E1000E_80003ES2LAN_H_ 5#define _E1000E_80003ES2LAN_H_ 6 7#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 8#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02 9#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10 10#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F 11 12#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008 13#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800 14#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010 15 16#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004 17#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 18#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 19 20#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C 21#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 22 23#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */ 24#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 25 26#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8 27#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9 28 29/* GG82563 PHY Specific Status Register (Page 0, Register 16 */ 30#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */ 31#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060 32#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */ 33#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */ 34#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */ 35 36/* PHY Specific Control Register 2 (Page 0, Register 26) */ 37#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */ 38 39/* MAC Specific Control Register (Page 2, Register 21) */ 40/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */ 41#define GG82563_MSCR_TX_CLK_MASK 0x0007 42#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004 43#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005 44#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007 45 46#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */ 47 48/* DSP Distance Register (Page 5, Register 26) 49 * 0 = <50M 50 * 1 = 50-80M 51 * 2 = 80-100M 52 * 3 = 110-140M 53 * 4 = >140M 54 */ 55#define GG82563_DSPD_CABLE_LENGTH 0x0007 56 57/* Kumeran Mode Control Register (Page 193, Register 16) */ 58#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 59 60/* Max number of times Kumeran read/write should be validated */ 61#define GG82563_MAX_KMRN_RETRY 0x5 62 63/* Power Management Control Register (Page 193, Register 20) */ 64/* 1=Enable SERDES Electrical Idle */ 65#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 66 67/* In-Band Control Register (Page 194, Register 18) */ 68#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ 69 70#endif