cgx_fw_if.h (6770B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* Marvell OcteonTx2 CGX driver 3 * 4 * Copyright (C) 2018 Marvell. 5 * 6 */ 7 8#ifndef __CGX_FW_INTF_H__ 9#define __CGX_FW_INTF_H__ 10 11#include <linux/bitops.h> 12#include <linux/bitfield.h> 13 14#define CGX_FIRMWARE_MAJOR_VER 1 15#define CGX_FIRMWARE_MINOR_VER 0 16 17#define CGX_EVENT_ACK 1UL 18 19/* CGX error types. set for cmd response status as CGX_STAT_FAIL */ 20enum cgx_error_type { 21 CGX_ERR_NONE, 22 CGX_ERR_LMAC_NOT_ENABLED, 23 CGX_ERR_LMAC_MODE_INVALID, 24 CGX_ERR_REQUEST_ID_INVALID, 25 CGX_ERR_PREV_ACK_NOT_CLEAR, 26 CGX_ERR_PHY_LINK_DOWN, 27 CGX_ERR_PCS_RESET_FAIL, 28 CGX_ERR_AN_CPT_FAIL, 29 CGX_ERR_TX_NOT_IDLE, 30 CGX_ERR_RX_NOT_IDLE, 31 CGX_ERR_SPUX_BR_BLKLOCK_FAIL, 32 CGX_ERR_SPUX_RX_ALIGN_FAIL, 33 CGX_ERR_SPUX_TX_FAULT, 34 CGX_ERR_SPUX_RX_FAULT, 35 CGX_ERR_SPUX_RESET_FAIL, 36 CGX_ERR_SPUX_AN_RESET_FAIL, 37 CGX_ERR_SPUX_USX_AN_RESET_FAIL, 38 CGX_ERR_SMUX_RX_LINK_NOT_OK, 39 CGX_ERR_PCS_RECV_LINK_FAIL, 40 CGX_ERR_TRAINING_FAIL, 41 CGX_ERR_RX_EQU_FAIL, 42 CGX_ERR_SPUX_BER_FAIL, 43 CGX_ERR_SPUX_RSFEC_ALGN_FAIL, 44 CGX_ERR_SPUX_MARKER_LOCK_FAIL, 45 CGX_ERR_SET_FEC_INVALID, 46 CGX_ERR_SET_FEC_FAIL, 47 CGX_ERR_MODULE_INVALID, 48 CGX_ERR_MODULE_NOT_PRESENT, 49 CGX_ERR_SPEED_CHANGE_INVALID, 50}; 51 52/* LINK speed types */ 53enum cgx_link_speed { 54 CGX_LINK_NONE, 55 CGX_LINK_10M, 56 CGX_LINK_100M, 57 CGX_LINK_1G, 58 CGX_LINK_2HG, 59 CGX_LINK_5G, 60 CGX_LINK_10G, 61 CGX_LINK_20G, 62 CGX_LINK_25G, 63 CGX_LINK_40G, 64 CGX_LINK_50G, 65 CGX_LINK_80G, 66 CGX_LINK_100G, 67 CGX_LINK_SPEED_MAX, 68}; 69 70enum CGX_MODE_ { 71 CGX_MODE_SGMII, 72 CGX_MODE_1000_BASEX, 73 CGX_MODE_QSGMII, 74 CGX_MODE_10G_C2C, 75 CGX_MODE_10G_C2M, 76 CGX_MODE_10G_KR, 77 CGX_MODE_20G_C2C, 78 CGX_MODE_25G_C2C, 79 CGX_MODE_25G_C2M, 80 CGX_MODE_25G_2_C2C, 81 CGX_MODE_25G_CR, 82 CGX_MODE_25G_KR, 83 CGX_MODE_40G_C2C, 84 CGX_MODE_40G_C2M, 85 CGX_MODE_40G_CR4, 86 CGX_MODE_40G_KR4, 87 CGX_MODE_40GAUI_C2C, 88 CGX_MODE_50G_C2C, 89 CGX_MODE_50G_C2M, 90 CGX_MODE_50G_4_C2C, 91 CGX_MODE_50G_CR, 92 CGX_MODE_50G_KR, 93 CGX_MODE_80GAUI_C2C, 94 CGX_MODE_100G_C2C, 95 CGX_MODE_100G_C2M, 96 CGX_MODE_100G_CR4, 97 CGX_MODE_100G_KR4, 98 CGX_MODE_MAX /* = 29 */ 99}; 100/* REQUEST ID types. Input to firmware */ 101enum cgx_cmd_id { 102 CGX_CMD_NONE, 103 CGX_CMD_GET_FW_VER, 104 CGX_CMD_GET_MAC_ADDR, 105 CGX_CMD_SET_MTU, 106 CGX_CMD_GET_LINK_STS, /* optional to user */ 107 CGX_CMD_LINK_BRING_UP, 108 CGX_CMD_LINK_BRING_DOWN, 109 CGX_CMD_INTERNAL_LBK, 110 CGX_CMD_EXTERNAL_LBK, 111 CGX_CMD_HIGIG, 112 CGX_CMD_LINK_STAT_CHANGE, 113 CGX_CMD_MODE_CHANGE, /* hot plug support */ 114 CGX_CMD_INTF_SHUTDOWN, 115 CGX_CMD_GET_MKEX_PRFL_SIZE, 116 CGX_CMD_GET_MKEX_PRFL_ADDR, 117 CGX_CMD_GET_FWD_BASE, /* get base address of shared FW data */ 118 CGX_CMD_GET_LINK_MODES, /* Supported Link Modes */ 119 CGX_CMD_SET_LINK_MODE, 120 CGX_CMD_GET_SUPPORTED_FEC, 121 CGX_CMD_SET_FEC, 122 CGX_CMD_GET_AN, 123 CGX_CMD_SET_AN, 124 CGX_CMD_GET_ADV_LINK_MODES, 125 CGX_CMD_GET_ADV_FEC, 126 CGX_CMD_GET_PHY_MOD_TYPE, /* line-side modulation type: NRZ or PAM4 */ 127 CGX_CMD_SET_PHY_MOD_TYPE, 128 CGX_CMD_PRBS, 129 CGX_CMD_DISPLAY_EYE, 130 CGX_CMD_GET_PHY_FEC_STATS, 131}; 132 133/* async event ids */ 134enum cgx_evt_id { 135 CGX_EVT_NONE, 136 CGX_EVT_LINK_CHANGE, 137}; 138 139/* event types - cause of interrupt */ 140enum cgx_evt_type { 141 CGX_EVT_ASYNC, 142 CGX_EVT_CMD_RESP 143}; 144 145enum cgx_stat { 146 CGX_STAT_SUCCESS, 147 CGX_STAT_FAIL 148}; 149 150enum cgx_cmd_own { 151 CGX_CMD_OWN_NS, 152 CGX_CMD_OWN_FIRMWARE, 153}; 154 155/* m - bit mask 156 * y - value to be written in the bitrange 157 * x - input value whose bitrange to be modified 158 */ 159#define FIELD_SET(m, y, x) \ 160 (((x) & ~(m)) | \ 161 FIELD_PREP((m), (y))) 162 163/* scratchx(0) CSR used for ATF->non-secure SW communication. 164 * This acts as the status register 165 * Provides details on command ack/status, command response, error details 166 */ 167#define EVTREG_ACK BIT_ULL(0) 168#define EVTREG_EVT_TYPE BIT_ULL(1) 169#define EVTREG_STAT BIT_ULL(2) 170#define EVTREG_ID GENMASK_ULL(8, 3) 171 172/* Response to command IDs with command status as CGX_STAT_FAIL 173 * 174 * Not applicable for commands : 175 * CGX_CMD_LINK_BRING_UP/DOWN/CGX_EVT_LINK_CHANGE 176 */ 177#define EVTREG_ERRTYPE GENMASK_ULL(18, 9) 178 179/* Response to cmd ID as CGX_CMD_GET_FW_VER with cmd status as 180 * CGX_STAT_SUCCESS 181 */ 182#define RESP_MAJOR_VER GENMASK_ULL(12, 9) 183#define RESP_MINOR_VER GENMASK_ULL(16, 13) 184 185/* Response to cmd ID as CGX_CMD_GET_MAC_ADDR with cmd status as 186 * CGX_STAT_SUCCESS 187 */ 188#define RESP_MAC_ADDR GENMASK_ULL(56, 9) 189 190/* Response to cmd ID as CGX_CMD_GET_MKEX_PRFL_SIZE with cmd status as 191 * CGX_STAT_SUCCESS 192 */ 193#define RESP_MKEX_PRFL_SIZE GENMASK_ULL(63, 9) 194 195/* Response to cmd ID as CGX_CMD_GET_MKEX_PRFL_ADDR with cmd status as 196 * CGX_STAT_SUCCESS 197 */ 198#define RESP_MKEX_PRFL_ADDR GENMASK_ULL(63, 9) 199 200/* Response to cmd ID as CGX_CMD_GET_FWD_BASE with cmd status as 201 * CGX_STAT_SUCCESS 202 */ 203#define RESP_FWD_BASE GENMASK_ULL(56, 9) 204#define RESP_LINKSTAT_LMAC_TYPE GENMASK_ULL(35, 28) 205 206/* Response to cmd ID - CGX_CMD_LINK_BRING_UP/DOWN, event ID CGX_EVT_LINK_CHANGE 207 * status can be either CGX_STAT_FAIL or CGX_STAT_SUCCESS 208 * 209 * In case of CGX_STAT_FAIL, it indicates CGX configuration failed 210 * when processing link up/down/change command. 211 * Both err_type and current link status will be updated 212 * 213 * In case of CGX_STAT_SUCCESS, err_type will be CGX_ERR_NONE and current 214 * link status will be updated 215 */ 216struct cgx_lnk_sts { 217 uint64_t reserved1:9; 218 uint64_t link_up:1; 219 uint64_t full_duplex:1; 220 uint64_t speed:4; /* cgx_link_speed */ 221 uint64_t err_type:10; 222 uint64_t an:1; /* AN supported or not */ 223 uint64_t fec:2; /* FEC type if enabled, if not 0 */ 224 uint64_t port:8; 225 uint64_t reserved2:28; 226}; 227 228#define RESP_LINKSTAT_UP GENMASK_ULL(9, 9) 229#define RESP_LINKSTAT_FDUPLEX GENMASK_ULL(10, 10) 230#define RESP_LINKSTAT_SPEED GENMASK_ULL(14, 11) 231#define RESP_LINKSTAT_ERRTYPE GENMASK_ULL(24, 15) 232#define RESP_LINKSTAT_AN GENMASK_ULL(25, 25) 233#define RESP_LINKSTAT_FEC GENMASK_ULL(27, 26) 234#define RESP_LINKSTAT_PORT GENMASK_ULL(35, 28) 235 236/* scratchx(1) CSR used for non-secure SW->ATF communication 237 * This CSR acts as a command register 238 */ 239#define CMDREG_OWN BIT_ULL(0) 240#define CMDREG_ID GENMASK_ULL(7, 2) 241 242/* Any command using enable/disable as an argument need 243 * to set this bitfield. 244 * Ex: Loopback, HiGig... 245 */ 246#define CMDREG_ENABLE BIT_ULL(8) 247 248/* command argument to be passed for cmd ID - CGX_CMD_SET_MTU */ 249#define CMDMTU_SIZE GENMASK_ULL(23, 8) 250 251/* command argument to be passed for cmd ID - CGX_CMD_LINK_CHANGE */ 252#define CMDLINKCHANGE_LINKUP BIT_ULL(8) 253#define CMDLINKCHANGE_FULLDPLX BIT_ULL(9) 254#define CMDLINKCHANGE_SPEED GENMASK_ULL(13, 10) 255 256#define CMDSETFEC GENMASK_ULL(9, 8) 257/* command argument to be passed for cmd ID - CGX_CMD_MODE_CHANGE */ 258#define CMDMODECHANGE_SPEED GENMASK_ULL(11, 8) 259#define CMDMODECHANGE_DUPLEX GENMASK_ULL(12, 12) 260#define CMDMODECHANGE_AN GENMASK_ULL(13, 13) 261#define CMDMODECHANGE_PORT GENMASK_ULL(21, 14) 262#define CMDMODECHANGE_FLAGS GENMASK_ULL(63, 22) 263 264#endif /* __CGX_FW_INTF_H__ */