dwmac1000_dma.c (8558B)
1// SPDX-License-Identifier: GPL-2.0-only 2/******************************************************************************* 3 This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. 4 DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for 5 developing this code. 6 7 This contains the functions to handle the dma. 8 9 Copyright (C) 2007-2009 STMicroelectronics Ltd 10 11 12 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 13*******************************************************************************/ 14 15#include <asm/io.h> 16#include "dwmac1000.h" 17#include "dwmac_dma.h" 18 19static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) 20{ 21 u32 value = readl(ioaddr + DMA_AXI_BUS_MODE); 22 int i; 23 24 pr_info("dwmac1000: Master AXI performs %s burst length\n", 25 !(value & DMA_AXI_UNDEF) ? "fixed" : "any"); 26 27 if (axi->axi_lpi_en) 28 value |= DMA_AXI_EN_LPI; 29 if (axi->axi_xit_frm) 30 value |= DMA_AXI_LPI_XIT_FRM; 31 32 value &= ~DMA_AXI_WR_OSR_LMT; 33 value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) << 34 DMA_AXI_WR_OSR_LMT_SHIFT; 35 36 value &= ~DMA_AXI_RD_OSR_LMT; 37 value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) << 38 DMA_AXI_RD_OSR_LMT_SHIFT; 39 40 /* Depending on the UNDEF bit the Master AXI will perform any burst 41 * length according to the BLEN programmed (by default all BLEN are 42 * set). 43 */ 44 for (i = 0; i < AXI_BLEN; i++) { 45 switch (axi->axi_blen[i]) { 46 case 256: 47 value |= DMA_AXI_BLEN256; 48 break; 49 case 128: 50 value |= DMA_AXI_BLEN128; 51 break; 52 case 64: 53 value |= DMA_AXI_BLEN64; 54 break; 55 case 32: 56 value |= DMA_AXI_BLEN32; 57 break; 58 case 16: 59 value |= DMA_AXI_BLEN16; 60 break; 61 case 8: 62 value |= DMA_AXI_BLEN8; 63 break; 64 case 4: 65 value |= DMA_AXI_BLEN4; 66 break; 67 } 68 } 69 70 writel(value, ioaddr + DMA_AXI_BUS_MODE); 71} 72 73static void dwmac1000_dma_init(void __iomem *ioaddr, 74 struct stmmac_dma_cfg *dma_cfg, int atds) 75{ 76 u32 value = readl(ioaddr + DMA_BUS_MODE); 77 int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; 78 int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; 79 80 /* 81 * Set the DMA PBL (Programmable Burst Length) mode. 82 * 83 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and 84 * post 3.5 mode bit acts as 8*PBL. 85 */ 86 if (dma_cfg->pblx8) 87 value |= DMA_BUS_MODE_MAXPBL; 88 value |= DMA_BUS_MODE_USP; 89 value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); 90 value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); 91 value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); 92 93 /* Set the Fixed burst mode */ 94 if (dma_cfg->fixed_burst) 95 value |= DMA_BUS_MODE_FB; 96 97 /* Mixed Burst has no effect when fb is set */ 98 if (dma_cfg->mixed_burst) 99 value |= DMA_BUS_MODE_MB; 100 101 if (atds) 102 value |= DMA_BUS_MODE_ATDS; 103 104 if (dma_cfg->aal) 105 value |= DMA_BUS_MODE_AAL; 106 107 writel(value, ioaddr + DMA_BUS_MODE); 108 109 /* Mask interrupts by writing to CSR7 */ 110 writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); 111} 112 113static void dwmac1000_dma_init_rx(void __iomem *ioaddr, 114 struct stmmac_dma_cfg *dma_cfg, 115 dma_addr_t dma_rx_phy, u32 chan) 116{ 117 /* RX descriptor base address list must be written into DMA CSR3 */ 118 writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR); 119} 120 121static void dwmac1000_dma_init_tx(void __iomem *ioaddr, 122 struct stmmac_dma_cfg *dma_cfg, 123 dma_addr_t dma_tx_phy, u32 chan) 124{ 125 /* TX descriptor base address list must be written into DMA CSR4 */ 126 writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR); 127} 128 129static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz) 130{ 131 csr6 &= ~DMA_CONTROL_RFA_MASK; 132 csr6 &= ~DMA_CONTROL_RFD_MASK; 133 134 /* Leave flow control disabled if receive fifo size is less than 135 * 4K or 0. Otherwise, send XOFF when fifo is 1K less than full, 136 * and send XON when 2K less than full. 137 */ 138 if (rxfifosz < 4096) { 139 csr6 &= ~DMA_CONTROL_EFC; 140 pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n", 141 rxfifosz); 142 } else { 143 csr6 |= DMA_CONTROL_EFC; 144 csr6 |= RFA_FULL_MINUS_1K; 145 csr6 |= RFD_FULL_MINUS_2K; 146 } 147 return csr6; 148} 149 150static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode, 151 u32 channel, int fifosz, u8 qmode) 152{ 153 u32 csr6 = readl(ioaddr + DMA_CONTROL); 154 155 if (mode == SF_DMA_MODE) { 156 pr_debug("GMAC: enable RX store and forward mode\n"); 157 csr6 |= DMA_CONTROL_RSF; 158 } else { 159 pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode); 160 csr6 &= ~DMA_CONTROL_RSF; 161 csr6 &= DMA_CONTROL_TC_RX_MASK; 162 if (mode <= 32) 163 csr6 |= DMA_CONTROL_RTC_32; 164 else if (mode <= 64) 165 csr6 |= DMA_CONTROL_RTC_64; 166 else if (mode <= 96) 167 csr6 |= DMA_CONTROL_RTC_96; 168 else 169 csr6 |= DMA_CONTROL_RTC_128; 170 } 171 172 /* Configure flow control based on rx fifo size */ 173 csr6 = dwmac1000_configure_fc(csr6, fifosz); 174 175 writel(csr6, ioaddr + DMA_CONTROL); 176} 177 178static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode, 179 u32 channel, int fifosz, u8 qmode) 180{ 181 u32 csr6 = readl(ioaddr + DMA_CONTROL); 182 183 if (mode == SF_DMA_MODE) { 184 pr_debug("GMAC: enable TX store and forward mode\n"); 185 /* Transmit COE type 2 cannot be done in cut-through mode. */ 186 csr6 |= DMA_CONTROL_TSF; 187 /* Operating on second frame increase the performance 188 * especially when transmit store-and-forward is used. 189 */ 190 csr6 |= DMA_CONTROL_OSF; 191 } else { 192 pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode); 193 csr6 &= ~DMA_CONTROL_TSF; 194 csr6 &= DMA_CONTROL_TC_TX_MASK; 195 /* Set the transmit threshold */ 196 if (mode <= 32) 197 csr6 |= DMA_CONTROL_TTC_32; 198 else if (mode <= 64) 199 csr6 |= DMA_CONTROL_TTC_64; 200 else if (mode <= 128) 201 csr6 |= DMA_CONTROL_TTC_128; 202 else if (mode <= 192) 203 csr6 |= DMA_CONTROL_TTC_192; 204 else 205 csr6 |= DMA_CONTROL_TTC_256; 206 } 207 208 writel(csr6, ioaddr + DMA_CONTROL); 209} 210 211static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space) 212{ 213 int i; 214 215 for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++) 216 if ((i < 12) || (i > 17)) 217 reg_space[DMA_BUS_MODE / 4 + i] = 218 readl(ioaddr + DMA_BUS_MODE + i * 4); 219} 220 221static int dwmac1000_get_hw_feature(void __iomem *ioaddr, 222 struct dma_features *dma_cap) 223{ 224 u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE); 225 226 if (!hw_cap) { 227 /* 0x00000000 is the value read on old hardware that does not 228 * implement this register 229 */ 230 return -EOPNOTSUPP; 231 } 232 233 dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL); 234 dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1; 235 dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2; 236 dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4; 237 dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5; 238 dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6; 239 dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8; 240 dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9; 241 dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10; 242 /* MMC */ 243 dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11; 244 /* IEEE 1588-2002 */ 245 dma_cap->time_stamp = 246 (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12; 247 /* IEEE 1588-2008 */ 248 dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13; 249 /* 802.3az - Energy-Efficient Ethernet (EEE) */ 250 dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14; 251 dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15; 252 /* TX and RX csum */ 253 dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16; 254 dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17; 255 dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18; 256 dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19; 257 /* TX and RX number of channels */ 258 dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20; 259 dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22; 260 /* Alternate (enhanced) DESC mode */ 261 dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; 262 263 return 0; 264} 265 266static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt, 267 u32 queue) 268{ 269 writel(riwt, ioaddr + DMA_RX_WATCHDOG); 270} 271 272const struct stmmac_dma_ops dwmac1000_dma_ops = { 273 .reset = dwmac_dma_reset, 274 .init = dwmac1000_dma_init, 275 .init_rx_chan = dwmac1000_dma_init_rx, 276 .init_tx_chan = dwmac1000_dma_init_tx, 277 .axi = dwmac1000_dma_axi, 278 .dump_regs = dwmac1000_dump_dma_regs, 279 .dma_rx_mode = dwmac1000_dma_operation_mode_rx, 280 .dma_tx_mode = dwmac1000_dma_operation_mode_tx, 281 .enable_dma_transmission = dwmac_enable_dma_transmission, 282 .enable_dma_irq = dwmac_enable_dma_irq, 283 .disable_dma_irq = dwmac_disable_dma_irq, 284 .start_tx = dwmac_dma_start_tx, 285 .stop_tx = dwmac_dma_stop_tx, 286 .start_rx = dwmac_dma_start_rx, 287 .stop_rx = dwmac_dma_stop_rx, 288 .dma_interrupt = dwmac_dma_interrupt, 289 .get_hw_feature = dwmac1000_get_hw_feature, 290 .rx_watchdog = dwmac1000_rx_watchdog, 291};