bcm-phy-lib.h (3437B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Copyright (C) 2015 Broadcom Corporation 4 */ 5 6#ifndef _LINUX_BCM_PHY_LIB_H 7#define _LINUX_BCM_PHY_LIB_H 8 9#include <linux/brcmphy.h> 10#include <linux/phy.h> 11 12/* 28nm only register definitions */ 13#define MISC_ADDR(base, channel) base, channel 14 15#define DSP_TAP10 MISC_ADDR(0x0a, 0) 16#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1) 17#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2) 18#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0) 19 20#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0) 21#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1) 22#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2) 23#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3) 24#define AFE_TX_CONFIG MISC_ADDR(0x39, 0) 25#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1) 26#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3) 27#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) 28 29 30int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); 31int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg); 32int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set); 33int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); 34int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); 35int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set); 36 37static inline int bcm_phy_write_exp_sel(struct phy_device *phydev, 38 u16 reg, u16 val) 39{ 40 return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val); 41} 42 43int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val); 44int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum); 45 46int bcm_phy_write_misc(struct phy_device *phydev, 47 u16 reg, u16 chl, u16 value); 48int bcm_phy_read_misc(struct phy_device *phydev, 49 u16 reg, u16 chl); 50 51int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, 52 u16 val); 53int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow); 54 55int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val); 56int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val); 57int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb); 58int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb); 59int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, 60 u16 set); 61int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, 62 u16 set); 63 64int bcm_phy_ack_intr(struct phy_device *phydev); 65int bcm_phy_config_intr(struct phy_device *phydev); 66irqreturn_t bcm_phy_handle_interrupt(struct phy_device *phydev); 67 68int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down); 69 70int bcm_phy_set_eee(struct phy_device *phydev, bool enable); 71 72int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count); 73 74int bcm_phy_downshift_set(struct phy_device *phydev, u8 count); 75 76int bcm_phy_get_sset_count(struct phy_device *phydev); 77void bcm_phy_get_strings(struct phy_device *phydev, u8 *data); 78void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow, 79 struct ethtool_stats *stats, u64 *data); 80void bcm_phy_r_rc_cal_reset(struct phy_device *phydev); 81int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev); 82int bcm_phy_enable_jumbo(struct phy_device *phydev); 83 84int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev, 85 bool *finished); 86int bcm_phy_cable_test_start_rdb(struct phy_device *phydev); 87int bcm_phy_cable_test_start(struct phy_device *phydev); 88int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished); 89 90#endif /* _LINUX_BCM_PHY_LIB_H */