sdio.h (6911B)
1/* SPDX-License-Identifier: ISC */ 2/* 3 * Copyright (c) 2004-2011 Atheros Communications Inc. 4 * Copyright (c) 2011-2012 Qualcomm Atheros, Inc. 5 * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com> 6 */ 7 8#ifndef _SDIO_H_ 9#define _SDIO_H_ 10 11#define ATH10K_HIF_MBOX_BLOCK_SIZE 256 12 13#define ATH10K_SDIO_MAX_BUFFER_SIZE 4096 /*Unsure of this constant*/ 14 15/* Mailbox address in SDIO address space */ 16#define ATH10K_HIF_MBOX_BASE_ADDR 0x1000 17#define ATH10K_HIF_MBOX_WIDTH 0x800 18 19#define ATH10K_HIF_MBOX_TOT_WIDTH \ 20 (ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH) 21 22#define ATH10K_HIF_MBOX0_EXT_BASE_ADDR 0x5000 23#define ATH10K_HIF_MBOX0_EXT_WIDTH (36 * 1024) 24#define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0 (56 * 1024) 25#define ATH10K_HIF_MBOX1_EXT_WIDTH (36 * 1024) 26#define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE (2 * 1024) 27 28#define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \ 29 (ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr)) 30 31#define ATH10K_HIF_MBOX_NUM_MAX 4 32#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM 1024 33 34#define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ) 35 36/* HTC runs over mailbox 0 */ 37#define ATH10K_HTC_MAILBOX 0 38#define ATH10K_HTC_MAILBOX_MASK BIT(ATH10K_HTC_MAILBOX) 39 40/* GMBOX addresses */ 41#define ATH10K_HIF_GMBOX_BASE_ADDR 0x7000 42#define ATH10K_HIF_GMBOX_WIDTH 0x4000 43 44/* Modified versions of the sdio.h macros. 45 * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET} 46 * macros in bitfield.h, so we define our own macros here. 47 */ 48#define ATH10K_SDIO_DRIVE_DTSX_MASK \ 49 (SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT) 50 51#define ATH10K_SDIO_DRIVE_DTSX_TYPE_B 0 52#define ATH10K_SDIO_DRIVE_DTSX_TYPE_A 1 53#define ATH10K_SDIO_DRIVE_DTSX_TYPE_C 2 54#define ATH10K_SDIO_DRIVE_DTSX_TYPE_D 3 55 56/* SDIO CCCR register definitions */ 57#define CCCR_SDIO_IRQ_MODE_REG 0xF0 58#define CCCR_SDIO_IRQ_MODE_REG_SDIO3 0x16 59 60#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR 0xF2 61 62#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A 0x02 63#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C 0x04 64#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D 0x08 65 66#define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS 0xF0 67#define CCCR_SDIO_ASYNC_INT_DELAY_MASK 0xC0 68 69/* mode to enable special 4-bit interrupt assertion without clock */ 70#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ BIT(0) 71#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3 BIT(1) 72 73#define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK 0x01 74 75/* The theoretical maximum number of RX messages that can be fetched 76 * from the mbox interrupt handler in one loop is derived in the following 77 * way: 78 * 79 * Let's assume that each packet in a bundle of the maximum bundle size 80 * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set 81 * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE). 82 * 83 * in this case the driver must allocate 84 * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's. 85 */ 86#define ATH10K_SDIO_MAX_RX_MSGS \ 87 (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) 88 89#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL 0x00000868u 90#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF 91#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000 92 93enum sdio_mbox_state { 94 SDIO_MBOX_UNKNOWN_STATE = 0, 95 SDIO_MBOX_REQUEST_TO_SLEEP_STATE = 1, 96 SDIO_MBOX_SLEEP_STATE = 2, 97 SDIO_MBOX_AWAKE_STATE = 3, 98}; 99 100#define ATH10K_CIS_READ_WAIT_4_RTC_CYCLE_IN_US 125 101#define ATH10K_CIS_RTC_STATE_ADDR 0x1138 102#define ATH10K_CIS_RTC_STATE_ON 0x01 103#define ATH10K_CIS_XTAL_SETTLE_DURATION_IN_US 1500 104#define ATH10K_CIS_READ_RETRY 10 105#define ATH10K_MIN_SLEEP_INACTIVITY_TIME_MS 50 106 107/* TODO: remove this and use skb->cb instead, much cleaner approach */ 108struct ath10k_sdio_bus_request { 109 struct list_head list; 110 111 /* sdio address */ 112 u32 address; 113 114 struct sk_buff *skb; 115 enum ath10k_htc_ep_id eid; 116 int status; 117 /* Specifies if the current request is an HTC message. 118 * If not, the eid is not applicable an the TX completion handler 119 * associated with the endpoint will not be invoked. 120 */ 121 bool htc_msg; 122 /* Completion that (if set) will be invoked for non HTC requests 123 * (htc_msg == false) when the request has been processed. 124 */ 125 struct completion *comp; 126}; 127 128struct ath10k_sdio_rx_data { 129 struct sk_buff *skb; 130 size_t alloc_len; 131 size_t act_len; 132 enum ath10k_htc_ep_id eid; 133 bool part_of_bundle; 134 bool last_in_bundle; 135 bool trailer_only; 136}; 137 138struct ath10k_sdio_irq_proc_regs { 139 u8 host_int_status; 140 u8 cpu_int_status; 141 u8 error_int_status; 142 u8 counter_int_status; 143 u8 mbox_frame; 144 u8 rx_lookahead_valid; 145 u8 host_int_status2; 146 u8 gmbox_rx_avail; 147 __le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX]; 148 __le32 int_status_enable; 149}; 150 151struct ath10k_sdio_irq_enable_regs { 152 u8 int_status_en; 153 u8 cpu_int_status_en; 154 u8 err_int_status_en; 155 u8 cntr_int_status_en; 156}; 157 158struct ath10k_sdio_irq_data { 159 /* protects irq_proc_reg and irq_en_reg below. 160 * We use a mutex here and not a spinlock since we will have the 161 * mutex locked while calling the sdio_memcpy_ functions. 162 * These function require non atomic context, and hence, spinlocks 163 * can be held while calling these functions. 164 */ 165 struct mutex mtx; 166 struct ath10k_sdio_irq_proc_regs *irq_proc_reg; 167 struct ath10k_sdio_irq_enable_regs *irq_en_reg; 168}; 169 170struct ath10k_mbox_ext_info { 171 u32 htc_ext_addr; 172 u32 htc_ext_sz; 173}; 174 175struct ath10k_mbox_info { 176 u32 htc_addr; 177 struct ath10k_mbox_ext_info ext_info[2]; 178 u32 block_size; 179 u32 block_mask; 180 u32 gmbox_addr; 181 u32 gmbox_sz; 182}; 183 184struct ath10k_sdio { 185 struct sdio_func *func; 186 187 struct ath10k_mbox_info mbox_info; 188 bool swap_mbox; 189 u32 mbox_addr[ATH10K_HTC_EP_COUNT]; 190 u32 mbox_size[ATH10K_HTC_EP_COUNT]; 191 192 /* available bus requests */ 193 struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM]; 194 /* free list of bus requests */ 195 struct list_head bus_req_freeq; 196 197 struct sk_buff_head rx_head; 198 199 /* protects access to bus_req_freeq */ 200 spinlock_t lock; 201 202 struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS]; 203 size_t n_rx_pkts; 204 205 struct ath10k *ar; 206 struct ath10k_sdio_irq_data irq_data; 207 208 /* temporary buffer for sdio read. 209 * It is allocated when probe, and used for receive bundled packets, 210 * the read for bundled packets is not parallel, so it does not need 211 * protected. 212 */ 213 u8 *vsg_buffer; 214 215 /* temporary buffer for BMI requests */ 216 u8 *bmi_buf; 217 218 bool is_disabled; 219 220 struct workqueue_struct *workqueue; 221 struct work_struct wr_async_work; 222 struct list_head wr_asyncq; 223 /* protects access to wr_asyncq */ 224 spinlock_t wr_async_lock; 225 226 struct work_struct async_work_rx; 227 struct timer_list sleep_timer; 228 enum sdio_mbox_state mbox_state; 229}; 230 231static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar) 232{ 233 return (struct ath10k_sdio *)ar->drv_priv; 234} 235 236#endif