cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

rx.c (24633B)


      1/*
      2 * Atheros CARL9170 driver
      3 *
      4 * 802.11 & command trap routines
      5 *
      6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
      7 * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
      8 *
      9 * This program is free software; you can redistribute it and/or modify
     10 * it under the terms of the GNU General Public License as published by
     11 * the Free Software Foundation; either version 2 of the License, or
     12 * (at your option) any later version.
     13 *
     14 * This program is distributed in the hope that it will be useful,
     15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
     16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     17 * GNU General Public License for more details.
     18 *
     19 * You should have received a copy of the GNU General Public License
     20 * along with this program; see the file COPYING.  If not, see
     21 * http://www.gnu.org/licenses/.
     22 *
     23 * This file incorporates work covered by the following copyright and
     24 * permission notice:
     25 *    Copyright (c) 2007-2008 Atheros Communications, Inc.
     26 *
     27 *    Permission to use, copy, modify, and/or distribute this software for any
     28 *    purpose with or without fee is hereby granted, provided that the above
     29 *    copyright notice and this permission notice appear in all copies.
     30 *
     31 *    THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     32 *    WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     33 *    MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     34 *    ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     35 *    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     36 *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     37 *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     38 */
     39
     40#include <linux/slab.h>
     41#include <linux/module.h>
     42#include <linux/etherdevice.h>
     43#include <linux/crc32.h>
     44#include <net/mac80211.h>
     45#include "carl9170.h"
     46#include "hw.h"
     47#include "cmd.h"
     48
     49static void carl9170_dbg_message(struct ar9170 *ar, const char *buf, u32 len)
     50{
     51	bool restart = false;
     52	enum carl9170_restart_reasons reason = CARL9170_RR_NO_REASON;
     53
     54	if (len > 3) {
     55		if (memcmp(buf, CARL9170_ERR_MAGIC, 3) == 0) {
     56			ar->fw.err_counter++;
     57			if (ar->fw.err_counter > 3) {
     58				restart = true;
     59				reason = CARL9170_RR_TOO_MANY_FIRMWARE_ERRORS;
     60			}
     61		}
     62
     63		if (memcmp(buf, CARL9170_BUG_MAGIC, 3) == 0) {
     64			ar->fw.bug_counter++;
     65			restart = true;
     66			reason = CARL9170_RR_FATAL_FIRMWARE_ERROR;
     67		}
     68	}
     69
     70	wiphy_info(ar->hw->wiphy, "FW: %.*s\n", len, buf);
     71
     72	if (restart)
     73		carl9170_restart(ar, reason);
     74}
     75
     76static void carl9170_handle_ps(struct ar9170 *ar, struct carl9170_rsp *rsp)
     77{
     78	u32 ps;
     79	bool new_ps;
     80
     81	ps = le32_to_cpu(rsp->psm.state);
     82
     83	new_ps = (ps & CARL9170_PSM_COUNTER) != CARL9170_PSM_WAKE;
     84	if (ar->ps.state != new_ps) {
     85		if (!new_ps) {
     86			ar->ps.sleep_ms = jiffies_to_msecs(jiffies -
     87				ar->ps.last_action);
     88		}
     89
     90		ar->ps.last_action = jiffies;
     91
     92		ar->ps.state = new_ps;
     93	}
     94}
     95
     96static int carl9170_check_sequence(struct ar9170 *ar, unsigned int seq)
     97{
     98	if (ar->cmd_seq < -1)
     99		return 0;
    100
    101	/*
    102	 * Initialize Counter
    103	 */
    104	if (ar->cmd_seq < 0)
    105		ar->cmd_seq = seq;
    106
    107	/*
    108	 * The sequence is strictly monotonic increasing and it never skips!
    109	 *
    110	 * Therefore we can safely assume that whenever we received an
    111	 * unexpected sequence we have lost some valuable data.
    112	 */
    113	if (seq != ar->cmd_seq) {
    114		int count;
    115
    116		count = (seq - ar->cmd_seq) % ar->fw.cmd_bufs;
    117
    118		wiphy_err(ar->hw->wiphy, "lost %d command responses/traps! "
    119			  "w:%d g:%d\n", count, ar->cmd_seq, seq);
    120
    121		carl9170_restart(ar, CARL9170_RR_LOST_RSP);
    122		return -EIO;
    123	}
    124
    125	ar->cmd_seq = (ar->cmd_seq + 1) % ar->fw.cmd_bufs;
    126	return 0;
    127}
    128
    129static void carl9170_cmd_callback(struct ar9170 *ar, u32 len, void *buffer)
    130{
    131	/*
    132	 * Some commands may have a variable response length
    133	 * and we cannot predict the correct length in advance.
    134	 * So we only check if we provided enough space for the data.
    135	 */
    136	if (unlikely(ar->readlen != (len - 4))) {
    137		dev_warn(&ar->udev->dev, "received invalid command response:"
    138			 "got %d, instead of %d\n", len - 4, ar->readlen);
    139		print_hex_dump_bytes("carl9170 cmd:", DUMP_PREFIX_OFFSET,
    140			ar->cmd_buf, (ar->cmd.hdr.len + 4) & 0x3f);
    141		print_hex_dump_bytes("carl9170 rsp:", DUMP_PREFIX_OFFSET,
    142			buffer, len);
    143		/*
    144		 * Do not complete. The command times out,
    145		 * and we get a stack trace from there.
    146		 */
    147		carl9170_restart(ar, CARL9170_RR_INVALID_RSP);
    148	}
    149
    150	spin_lock(&ar->cmd_lock);
    151	if (ar->readbuf) {
    152		if (len >= 4)
    153			memcpy(ar->readbuf, buffer + 4, len - 4);
    154
    155		ar->readbuf = NULL;
    156	}
    157	complete(&ar->cmd_wait);
    158	spin_unlock(&ar->cmd_lock);
    159}
    160
    161void carl9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
    162{
    163	struct carl9170_rsp *cmd = buf;
    164	struct ieee80211_vif *vif;
    165
    166	if ((cmd->hdr.cmd & CARL9170_RSP_FLAG) != CARL9170_RSP_FLAG) {
    167		if (!(cmd->hdr.cmd & CARL9170_CMD_ASYNC_FLAG))
    168			carl9170_cmd_callback(ar, len, buf);
    169
    170		return;
    171	}
    172
    173	if (unlikely(cmd->hdr.len != (len - 4))) {
    174		if (net_ratelimit()) {
    175			wiphy_err(ar->hw->wiphy, "FW: received over-/under"
    176				"sized event %x (%d, but should be %d).\n",
    177			       cmd->hdr.cmd, cmd->hdr.len, len - 4);
    178
    179			print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE,
    180					     buf, len);
    181		}
    182
    183		return;
    184	}
    185
    186	/* hardware event handlers */
    187	switch (cmd->hdr.cmd) {
    188	case CARL9170_RSP_PRETBTT:
    189		/* pre-TBTT event */
    190		rcu_read_lock();
    191		vif = carl9170_get_main_vif(ar);
    192
    193		if (!vif) {
    194			rcu_read_unlock();
    195			break;
    196		}
    197
    198		switch (vif->type) {
    199		case NL80211_IFTYPE_STATION:
    200			carl9170_handle_ps(ar, cmd);
    201			break;
    202
    203		case NL80211_IFTYPE_AP:
    204		case NL80211_IFTYPE_ADHOC:
    205		case NL80211_IFTYPE_MESH_POINT:
    206			carl9170_update_beacon(ar, true);
    207			break;
    208
    209		default:
    210			break;
    211		}
    212		rcu_read_unlock();
    213
    214		break;
    215
    216
    217	case CARL9170_RSP_TXCOMP:
    218		/* TX status notification */
    219		carl9170_tx_process_status(ar, cmd);
    220		break;
    221
    222	case CARL9170_RSP_BEACON_CONFIG:
    223		/*
    224		 * (IBSS) beacon send notification
    225		 * bytes: 04 c2 XX YY B4 B3 B2 B1
    226		 *
    227		 * XX always 80
    228		 * YY always 00
    229		 * B1-B4 "should" be the number of send out beacons.
    230		 */
    231		break;
    232
    233	case CARL9170_RSP_ATIM:
    234		/* End of Atim Window */
    235		break;
    236
    237	case CARL9170_RSP_WATCHDOG:
    238		/* Watchdog Interrupt */
    239		carl9170_restart(ar, CARL9170_RR_WATCHDOG);
    240		break;
    241
    242	case CARL9170_RSP_TEXT:
    243		/* firmware debug */
    244		carl9170_dbg_message(ar, (char *)buf + 4, len - 4);
    245		break;
    246
    247	case CARL9170_RSP_HEXDUMP:
    248		wiphy_dbg(ar->hw->wiphy, "FW: HD %d\n", len - 4);
    249		print_hex_dump_bytes("FW:", DUMP_PREFIX_NONE,
    250				     (char *)buf + 4, len - 4);
    251		break;
    252
    253	case CARL9170_RSP_RADAR:
    254		if (!net_ratelimit())
    255			break;
    256
    257		wiphy_info(ar->hw->wiphy, "FW: RADAR! Please report this "
    258		       "incident to linux-wireless@vger.kernel.org !\n");
    259		break;
    260
    261	case CARL9170_RSP_GPIO:
    262#ifdef CONFIG_CARL9170_WPC
    263		if (ar->wps.pbc) {
    264			bool state = !!(cmd->gpio.gpio & cpu_to_le32(
    265				AR9170_GPIO_PORT_WPS_BUTTON_PRESSED));
    266
    267			if (state != ar->wps.pbc_state) {
    268				ar->wps.pbc_state = state;
    269				input_report_key(ar->wps.pbc, KEY_WPS_BUTTON,
    270						 state);
    271				input_sync(ar->wps.pbc);
    272			}
    273		}
    274#endif /* CONFIG_CARL9170_WPC */
    275		break;
    276
    277	case CARL9170_RSP_BOOT:
    278		complete(&ar->fw_boot_wait);
    279		break;
    280
    281	default:
    282		wiphy_err(ar->hw->wiphy, "FW: received unhandled event %x\n",
    283			cmd->hdr.cmd);
    284		print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
    285		break;
    286	}
    287}
    288
    289static int carl9170_rx_mac_status(struct ar9170 *ar,
    290	struct ar9170_rx_head *head, struct ar9170_rx_macstatus *mac,
    291	struct ieee80211_rx_status *status)
    292{
    293	struct ieee80211_channel *chan;
    294	u8 error, decrypt;
    295
    296	BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12);
    297	BUILD_BUG_ON(sizeof(struct ar9170_rx_macstatus) != 4);
    298
    299	error = mac->error;
    300
    301	if (error & AR9170_RX_ERROR_WRONG_RA) {
    302		if (!ar->sniffer_enabled)
    303			return -EINVAL;
    304	}
    305
    306	if (error & AR9170_RX_ERROR_PLCP) {
    307		if (!(ar->filter_state & FIF_PLCPFAIL))
    308			return -EINVAL;
    309
    310		status->flag |= RX_FLAG_FAILED_PLCP_CRC;
    311	}
    312
    313	if (error & AR9170_RX_ERROR_FCS) {
    314		ar->tx_fcs_errors++;
    315
    316		if (!(ar->filter_state & FIF_FCSFAIL))
    317			return -EINVAL;
    318
    319		status->flag |= RX_FLAG_FAILED_FCS_CRC;
    320	}
    321
    322	decrypt = ar9170_get_decrypt_type(mac);
    323	if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
    324	    decrypt != AR9170_ENC_ALG_NONE) {
    325		if ((decrypt == AR9170_ENC_ALG_TKIP) &&
    326		    (error & AR9170_RX_ERROR_MMIC))
    327			status->flag |= RX_FLAG_MMIC_ERROR;
    328
    329		status->flag |= RX_FLAG_DECRYPTED;
    330	}
    331
    332	if (error & AR9170_RX_ERROR_DECRYPT && !ar->sniffer_enabled)
    333		return -ENODATA;
    334
    335	error &= ~(AR9170_RX_ERROR_MMIC |
    336		   AR9170_RX_ERROR_FCS |
    337		   AR9170_RX_ERROR_WRONG_RA |
    338		   AR9170_RX_ERROR_DECRYPT |
    339		   AR9170_RX_ERROR_PLCP);
    340
    341	/* drop any other error frames */
    342	if (unlikely(error)) {
    343		/* TODO: update netdevice's RX dropped/errors statistics */
    344
    345		if (net_ratelimit())
    346			wiphy_dbg(ar->hw->wiphy, "received frame with "
    347			       "suspicious error code (%#x).\n", error);
    348
    349		return -EINVAL;
    350	}
    351
    352	chan = ar->channel;
    353	if (chan) {
    354		status->band = chan->band;
    355		status->freq = chan->center_freq;
    356	}
    357
    358	switch (mac->status & AR9170_RX_STATUS_MODULATION) {
    359	case AR9170_RX_STATUS_MODULATION_CCK:
    360		if (mac->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
    361			status->enc_flags |= RX_ENC_FLAG_SHORTPRE;
    362		switch (head->plcp[0]) {
    363		case AR9170_RX_PHY_RATE_CCK_1M:
    364			status->rate_idx = 0;
    365			break;
    366		case AR9170_RX_PHY_RATE_CCK_2M:
    367			status->rate_idx = 1;
    368			break;
    369		case AR9170_RX_PHY_RATE_CCK_5M:
    370			status->rate_idx = 2;
    371			break;
    372		case AR9170_RX_PHY_RATE_CCK_11M:
    373			status->rate_idx = 3;
    374			break;
    375		default:
    376			if (net_ratelimit()) {
    377				wiphy_err(ar->hw->wiphy, "invalid plcp cck "
    378				       "rate (%x).\n", head->plcp[0]);
    379			}
    380
    381			return -EINVAL;
    382		}
    383		break;
    384
    385	case AR9170_RX_STATUS_MODULATION_DUPOFDM:
    386	case AR9170_RX_STATUS_MODULATION_OFDM:
    387		switch (head->plcp[0] & 0xf) {
    388		case AR9170_TXRX_PHY_RATE_OFDM_6M:
    389			status->rate_idx = 0;
    390			break;
    391		case AR9170_TXRX_PHY_RATE_OFDM_9M:
    392			status->rate_idx = 1;
    393			break;
    394		case AR9170_TXRX_PHY_RATE_OFDM_12M:
    395			status->rate_idx = 2;
    396			break;
    397		case AR9170_TXRX_PHY_RATE_OFDM_18M:
    398			status->rate_idx = 3;
    399			break;
    400		case AR9170_TXRX_PHY_RATE_OFDM_24M:
    401			status->rate_idx = 4;
    402			break;
    403		case AR9170_TXRX_PHY_RATE_OFDM_36M:
    404			status->rate_idx = 5;
    405			break;
    406		case AR9170_TXRX_PHY_RATE_OFDM_48M:
    407			status->rate_idx = 6;
    408			break;
    409		case AR9170_TXRX_PHY_RATE_OFDM_54M:
    410			status->rate_idx = 7;
    411			break;
    412		default:
    413			if (net_ratelimit()) {
    414				wiphy_err(ar->hw->wiphy, "invalid plcp ofdm "
    415					"rate (%x).\n", head->plcp[0]);
    416			}
    417
    418			return -EINVAL;
    419		}
    420		if (status->band == NL80211_BAND_2GHZ)
    421			status->rate_idx += 4;
    422		break;
    423
    424	case AR9170_RX_STATUS_MODULATION_HT:
    425		if (head->plcp[3] & 0x80)
    426			status->bw = RATE_INFO_BW_40;
    427		if (head->plcp[6] & 0x80)
    428			status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
    429
    430		status->rate_idx = clamp(head->plcp[3] & 0x7f, 0, 75);
    431		status->encoding = RX_ENC_HT;
    432		break;
    433
    434	default:
    435		BUG();
    436		return -ENOSYS;
    437	}
    438
    439	return 0;
    440}
    441
    442static void carl9170_rx_phy_status(struct ar9170 *ar,
    443	struct ar9170_rx_phystatus *phy, struct ieee80211_rx_status *status)
    444{
    445	int i;
    446
    447	BUILD_BUG_ON(sizeof(struct ar9170_rx_phystatus) != 20);
    448
    449	for (i = 0; i < 3; i++)
    450		if (phy->rssi[i] != 0x80)
    451			status->antenna |= BIT(i);
    452
    453	/* post-process RSSI */
    454	for (i = 0; i < 7; i++)
    455		if (phy->rssi[i] & 0x80)
    456			phy->rssi[i] = ((~phy->rssi[i] & 0x7f) + 1) & 0x7f;
    457
    458	/* TODO: we could do something with phy_errors */
    459	status->signal = ar->noise[0] + phy->rssi_combined;
    460}
    461
    462static struct sk_buff *carl9170_rx_copy_data(u8 *buf, int len)
    463{
    464	struct sk_buff *skb;
    465	int reserved = 0;
    466	struct ieee80211_hdr *hdr = (void *) buf;
    467
    468	if (ieee80211_is_data_qos(hdr->frame_control)) {
    469		u8 *qc = ieee80211_get_qos_ctl(hdr);
    470		reserved += NET_IP_ALIGN;
    471
    472		if (*qc & IEEE80211_QOS_CTL_A_MSDU_PRESENT)
    473			reserved += NET_IP_ALIGN;
    474	}
    475
    476	if (ieee80211_has_a4(hdr->frame_control))
    477		reserved += NET_IP_ALIGN;
    478
    479	reserved = 32 + (reserved & NET_IP_ALIGN);
    480
    481	skb = dev_alloc_skb(len + reserved);
    482	if (likely(skb)) {
    483		skb_reserve(skb, reserved);
    484		skb_put_data(skb, buf, len);
    485	}
    486
    487	return skb;
    488}
    489
    490static u8 *carl9170_find_ie(u8 *data, unsigned int len, u8 ie)
    491{
    492	struct ieee80211_mgmt *mgmt = (void *)data;
    493	u8 *pos, *end;
    494
    495	pos = (u8 *)mgmt->u.beacon.variable;
    496	end = data + len;
    497	while (pos < end) {
    498		if (pos + 2 + pos[1] > end)
    499			return NULL;
    500
    501		if (pos[0] == ie)
    502			return pos;
    503
    504		pos += 2 + pos[1];
    505	}
    506	return NULL;
    507}
    508
    509/*
    510 * NOTE:
    511 *
    512 * The firmware is in charge of waking up the device just before
    513 * the AP is expected to transmit the next beacon.
    514 *
    515 * This leaves the driver with the important task of deciding when
    516 * to set the PHY back to bed again.
    517 */
    518static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len)
    519{
    520	struct ieee80211_hdr *hdr = data;
    521	struct ieee80211_tim_ie *tim_ie;
    522	struct ath_common *common = &ar->common;
    523	u8 *tim;
    524	u8 tim_len;
    525	bool cam;
    526
    527	if (likely(!(ar->hw->conf.flags & IEEE80211_CONF_PS)))
    528		return;
    529
    530	/* min. beacon length + FCS_LEN */
    531	if (len <= 40 + FCS_LEN)
    532		return;
    533
    534	/* check if this really is a beacon */
    535	/* and only beacons from the associated BSSID, please */
    536	if (!ath_is_mybeacon(common, hdr) || !common->curaid)
    537		return;
    538
    539	ar->ps.last_beacon = jiffies;
    540
    541	tim = carl9170_find_ie(data, len - FCS_LEN, WLAN_EID_TIM);
    542	if (!tim)
    543		return;
    544
    545	if (tim[1] < sizeof(*tim_ie))
    546		return;
    547
    548	tim_len = tim[1];
    549	tim_ie = (struct ieee80211_tim_ie *) &tim[2];
    550
    551	if (!WARN_ON_ONCE(!ar->hw->conf.ps_dtim_period))
    552		ar->ps.dtim_counter = (tim_ie->dtim_count - 1) %
    553			ar->hw->conf.ps_dtim_period;
    554
    555	/* Check whenever the PHY can be turned off again. */
    556
    557	/* 1. What about buffered unicast traffic for our AID? */
    558	cam = ieee80211_check_tim(tim_ie, tim_len, ar->common.curaid);
    559
    560	/* 2. Maybe the AP wants to send multicast/broadcast data? */
    561	cam |= !!(tim_ie->bitmap_ctrl & 0x01);
    562
    563	if (!cam) {
    564		/* back to low-power land. */
    565		ar->ps.off_override &= ~PS_OFF_BCN;
    566		carl9170_ps_check(ar);
    567	} else {
    568		/* force CAM */
    569		ar->ps.off_override |= PS_OFF_BCN;
    570	}
    571}
    572
    573static void carl9170_ba_check(struct ar9170 *ar, void *data, unsigned int len)
    574{
    575	struct ieee80211_bar *bar = data;
    576	struct carl9170_bar_list_entry *entry;
    577	unsigned int queue;
    578
    579	if (likely(!ieee80211_is_back(bar->frame_control)))
    580		return;
    581
    582	if (len <= sizeof(*bar) + FCS_LEN)
    583		return;
    584
    585	queue = TID_TO_WME_AC(((le16_to_cpu(bar->control) &
    586		IEEE80211_BAR_CTRL_TID_INFO_MASK) >>
    587		IEEE80211_BAR_CTRL_TID_INFO_SHIFT) & 7);
    588
    589	rcu_read_lock();
    590	list_for_each_entry_rcu(entry, &ar->bar_list[queue], list) {
    591		struct sk_buff *entry_skb = entry->skb;
    592		struct _carl9170_tx_superframe *super = (void *)entry_skb->data;
    593		struct ieee80211_bar *entry_bar = (void *)super->frame_data;
    594
    595#define TID_CHECK(a, b) (						\
    596	((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) ==	\
    597	((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)))		\
    598
    599		if (bar->start_seq_num == entry_bar->start_seq_num &&
    600		    TID_CHECK(bar->control, entry_bar->control) &&
    601		    ether_addr_equal_64bits(bar->ra, entry_bar->ta) &&
    602		    ether_addr_equal_64bits(bar->ta, entry_bar->ra)) {
    603			struct ieee80211_tx_info *tx_info;
    604
    605			tx_info = IEEE80211_SKB_CB(entry_skb);
    606			tx_info->flags |= IEEE80211_TX_STAT_ACK;
    607
    608			spin_lock_bh(&ar->bar_list_lock[queue]);
    609			list_del_rcu(&entry->list);
    610			spin_unlock_bh(&ar->bar_list_lock[queue]);
    611			kfree_rcu(entry, head);
    612			break;
    613		}
    614	}
    615	rcu_read_unlock();
    616
    617#undef TID_CHECK
    618}
    619
    620static bool carl9170_ampdu_check(struct ar9170 *ar, u8 *buf, u8 ms,
    621				 struct ieee80211_rx_status *rx_status)
    622{
    623	__le16 fc;
    624
    625	if ((ms & AR9170_RX_STATUS_MPDU) == AR9170_RX_STATUS_MPDU_SINGLE) {
    626		/*
    627		 * This frame is not part of an aMPDU.
    628		 * Therefore it is not subjected to any
    629		 * of the following content restrictions.
    630		 */
    631		return true;
    632	}
    633
    634	rx_status->flag |= RX_FLAG_AMPDU_DETAILS | RX_FLAG_AMPDU_LAST_KNOWN;
    635	rx_status->ampdu_reference = ar->ampdu_ref;
    636
    637	/*
    638	 * "802.11n - 7.4a.3 A-MPDU contents" describes in which contexts
    639	 * certain frame types can be part of an aMPDU.
    640	 *
    641	 * In order to keep the processing cost down, I opted for a
    642	 * stateless filter solely based on the frame control field.
    643	 */
    644
    645	fc = ((struct ieee80211_hdr *)buf)->frame_control;
    646	if (ieee80211_is_data_qos(fc) && ieee80211_is_data_present(fc))
    647		return true;
    648
    649	if (ieee80211_is_ack(fc) || ieee80211_is_back(fc) ||
    650	    ieee80211_is_back_req(fc))
    651		return true;
    652
    653	if (ieee80211_is_action(fc))
    654		return true;
    655
    656	return false;
    657}
    658
    659static int carl9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len,
    660				struct ieee80211_rx_status *status)
    661{
    662	struct sk_buff *skb;
    663
    664	/* (driver) frame trap handler
    665	 *
    666	 * Because power-saving mode handing has to be implemented by
    667	 * the driver/firmware. We have to check each incoming beacon
    668	 * from the associated AP, if there's new data for us (either
    669	 * broadcast/multicast or unicast) we have to react quickly.
    670	 *
    671	 * So, if you have you want to add additional frame trap
    672	 * handlers, this would be the perfect place!
    673	 */
    674
    675	carl9170_ps_beacon(ar, buf, len);
    676
    677	carl9170_ba_check(ar, buf, len);
    678
    679	skb = carl9170_rx_copy_data(buf, len);
    680	if (!skb)
    681		return -ENOMEM;
    682
    683	memcpy(IEEE80211_SKB_RXCB(skb), status, sizeof(*status));
    684	ieee80211_rx(ar->hw, skb);
    685	return 0;
    686}
    687
    688/*
    689 * If the frame alignment is right (or the kernel has
    690 * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
    691 * is only a single MPDU in the USB frame, then we could
    692 * submit to mac80211 the SKB directly. However, since
    693 * there may be multiple packets in one SKB in stream
    694 * mode, and we need to observe the proper ordering,
    695 * this is non-trivial.
    696 */
    697static void carl9170_rx_untie_data(struct ar9170 *ar, u8 *buf, int len)
    698{
    699	struct ar9170_rx_head *head;
    700	struct ar9170_rx_macstatus *mac;
    701	struct ar9170_rx_phystatus *phy = NULL;
    702	struct ieee80211_rx_status status;
    703	int mpdu_len;
    704	u8 mac_status;
    705
    706	if (!IS_STARTED(ar))
    707		return;
    708
    709	if (unlikely(len < sizeof(*mac)))
    710		goto drop;
    711
    712	memset(&status, 0, sizeof(status));
    713
    714	mpdu_len = len - sizeof(*mac);
    715
    716	mac = (void *)(buf + mpdu_len);
    717	mac_status = mac->status;
    718	switch (mac_status & AR9170_RX_STATUS_MPDU) {
    719	case AR9170_RX_STATUS_MPDU_FIRST:
    720		ar->ampdu_ref++;
    721		/* Aggregated MPDUs start with an PLCP header */
    722		if (likely(mpdu_len >= sizeof(struct ar9170_rx_head))) {
    723			head = (void *) buf;
    724
    725			/*
    726			 * The PLCP header needs to be cached for the
    727			 * following MIDDLE + LAST A-MPDU packets.
    728			 *
    729			 * So, if you are wondering why all frames seem
    730			 * to share a common RX status information,
    731			 * then you have the answer right here...
    732			 */
    733			memcpy(&ar->rx_plcp, (void *) buf,
    734			       sizeof(struct ar9170_rx_head));
    735
    736			mpdu_len -= sizeof(struct ar9170_rx_head);
    737			buf += sizeof(struct ar9170_rx_head);
    738
    739			ar->rx_has_plcp = true;
    740		} else {
    741			if (net_ratelimit()) {
    742				wiphy_err(ar->hw->wiphy, "plcp info "
    743					"is clipped.\n");
    744			}
    745
    746			goto drop;
    747		}
    748		break;
    749
    750	case AR9170_RX_STATUS_MPDU_LAST:
    751		status.flag |= RX_FLAG_AMPDU_IS_LAST;
    752
    753		/*
    754		 * The last frame of an A-MPDU has an extra tail
    755		 * which does contain the phy status of the whole
    756		 * aggregate.
    757		 */
    758		if (likely(mpdu_len >= sizeof(struct ar9170_rx_phystatus))) {
    759			mpdu_len -= sizeof(struct ar9170_rx_phystatus);
    760			phy = (void *)(buf + mpdu_len);
    761		} else {
    762			if (net_ratelimit()) {
    763				wiphy_err(ar->hw->wiphy, "frame tail "
    764					"is clipped.\n");
    765			}
    766
    767			goto drop;
    768		}
    769		fallthrough;
    770
    771	case AR9170_RX_STATUS_MPDU_MIDDLE:
    772		/*  These are just data + mac status */
    773		if (unlikely(!ar->rx_has_plcp)) {
    774			if (!net_ratelimit())
    775				return;
    776
    777			wiphy_err(ar->hw->wiphy, "rx stream does not start "
    778					"with a first_mpdu frame tag.\n");
    779
    780			goto drop;
    781		}
    782
    783		head = &ar->rx_plcp;
    784		break;
    785
    786	case AR9170_RX_STATUS_MPDU_SINGLE:
    787		/* single mpdu has both: plcp (head) and phy status (tail) */
    788		head = (void *) buf;
    789
    790		mpdu_len -= sizeof(struct ar9170_rx_head);
    791		mpdu_len -= sizeof(struct ar9170_rx_phystatus);
    792
    793		buf += sizeof(struct ar9170_rx_head);
    794		phy = (void *)(buf + mpdu_len);
    795		break;
    796
    797	default:
    798		BUG();
    799		break;
    800	}
    801
    802	/* FC + DU + RA + FCS */
    803	if (unlikely(mpdu_len < (2 + 2 + ETH_ALEN + FCS_LEN)))
    804		goto drop;
    805
    806	if (unlikely(carl9170_rx_mac_status(ar, head, mac, &status)))
    807		goto drop;
    808
    809	if (!carl9170_ampdu_check(ar, buf, mac_status, &status))
    810		goto drop;
    811
    812	if (phy)
    813		carl9170_rx_phy_status(ar, phy, &status);
    814	else
    815		status.flag |= RX_FLAG_NO_SIGNAL_VAL;
    816
    817	if (carl9170_handle_mpdu(ar, buf, mpdu_len, &status))
    818		goto drop;
    819
    820	return;
    821drop:
    822	ar->rx_dropped++;
    823}
    824
    825static void carl9170_rx_untie_cmds(struct ar9170 *ar, const u8 *respbuf,
    826				   const unsigned int resplen)
    827{
    828	struct carl9170_rsp *cmd;
    829	int i = 0;
    830
    831	while (i < resplen) {
    832		cmd = (void *) &respbuf[i];
    833
    834		i += cmd->hdr.len + 4;
    835		if (unlikely(i > resplen))
    836			break;
    837
    838		if (carl9170_check_sequence(ar, cmd->hdr.seq))
    839			break;
    840
    841		carl9170_handle_command_response(ar, cmd, cmd->hdr.len + 4);
    842	}
    843
    844	if (unlikely(i != resplen)) {
    845		if (!net_ratelimit())
    846			return;
    847
    848		wiphy_err(ar->hw->wiphy, "malformed firmware trap:\n");
    849		print_hex_dump_bytes("rxcmd:", DUMP_PREFIX_OFFSET,
    850				     respbuf, resplen);
    851	}
    852}
    853
    854static void __carl9170_rx(struct ar9170 *ar, u8 *buf, unsigned int len)
    855{
    856	unsigned int i = 0;
    857
    858	/* weird thing, but this is the same in the original driver */
    859	while (len > 2 && i < 12 && buf[0] == 0xff && buf[1] == 0xff) {
    860		i += 2;
    861		len -= 2;
    862		buf += 2;
    863	}
    864
    865	if (unlikely(len < 4))
    866		return;
    867
    868	/* found the 6 * 0xffff marker? */
    869	if (i == 12)
    870		carl9170_rx_untie_cmds(ar, buf, len);
    871	else
    872		carl9170_rx_untie_data(ar, buf, len);
    873}
    874
    875static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len)
    876{
    877	unsigned int tlen, wlen = 0, clen = 0;
    878	struct ar9170_stream *rx_stream;
    879	u8 *tbuf;
    880
    881	tbuf = buf;
    882	tlen = len;
    883
    884	while (tlen >= 4) {
    885		rx_stream = (void *) tbuf;
    886		clen = le16_to_cpu(rx_stream->length);
    887		wlen = ALIGN(clen, 4);
    888
    889		/* check if this is stream has a valid tag.*/
    890		if (rx_stream->tag != cpu_to_le16(AR9170_RX_STREAM_TAG)) {
    891			/*
    892			 * TODO: handle the highly unlikely event that the
    893			 * corrupted stream has the TAG at the right position.
    894			 */
    895
    896			/* check if the frame can be repaired. */
    897			if (!ar->rx_failover_missing) {
    898
    899				/* this is not "short read". */
    900				if (net_ratelimit()) {
    901					wiphy_err(ar->hw->wiphy,
    902						"missing tag!\n");
    903				}
    904
    905				__carl9170_rx(ar, tbuf, tlen);
    906				return;
    907			}
    908
    909			if (ar->rx_failover_missing > tlen) {
    910				if (net_ratelimit()) {
    911					wiphy_err(ar->hw->wiphy,
    912						"possible multi "
    913						"stream corruption!\n");
    914					goto err_telluser;
    915				} else {
    916					goto err_silent;
    917				}
    918			}
    919
    920			skb_put_data(ar->rx_failover, tbuf, tlen);
    921			ar->rx_failover_missing -= tlen;
    922
    923			if (ar->rx_failover_missing <= 0) {
    924				/*
    925				 * nested carl9170_rx_stream call!
    926				 *
    927				 * termination is guaranteed, even when the
    928				 * combined frame also have an element with
    929				 * a bad tag.
    930				 */
    931
    932				ar->rx_failover_missing = 0;
    933				carl9170_rx_stream(ar, ar->rx_failover->data,
    934						   ar->rx_failover->len);
    935
    936				skb_reset_tail_pointer(ar->rx_failover);
    937				skb_trim(ar->rx_failover, 0);
    938			}
    939
    940			return;
    941		}
    942
    943		/* check if stream is clipped */
    944		if (wlen > tlen - 4) {
    945			if (ar->rx_failover_missing) {
    946				/* TODO: handle double stream corruption. */
    947				if (net_ratelimit()) {
    948					wiphy_err(ar->hw->wiphy, "double rx "
    949						"stream corruption!\n");
    950					goto err_telluser;
    951				} else {
    952					goto err_silent;
    953				}
    954			}
    955
    956			/*
    957			 * save incomplete data set.
    958			 * the firmware will resend the missing bits when
    959			 * the rx - descriptor comes round again.
    960			 */
    961
    962			skb_put_data(ar->rx_failover, tbuf, tlen);
    963			ar->rx_failover_missing = clen - tlen;
    964			return;
    965		}
    966		__carl9170_rx(ar, rx_stream->payload, clen);
    967
    968		tbuf += wlen + 4;
    969		tlen -= wlen + 4;
    970	}
    971
    972	if (tlen) {
    973		if (net_ratelimit()) {
    974			wiphy_err(ar->hw->wiphy, "%d bytes of unprocessed "
    975				"data left in rx stream!\n", tlen);
    976		}
    977
    978		goto err_telluser;
    979	}
    980
    981	return;
    982
    983err_telluser:
    984	wiphy_err(ar->hw->wiphy, "damaged RX stream data [want:%d, "
    985		"data:%d, rx:%d, pending:%d ]\n", clen, wlen, tlen,
    986		ar->rx_failover_missing);
    987
    988	if (ar->rx_failover_missing)
    989		print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET,
    990				     ar->rx_failover->data,
    991				     ar->rx_failover->len);
    992
    993	print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET,
    994			     buf, len);
    995
    996	wiphy_err(ar->hw->wiphy, "please check your hardware and cables, if "
    997		"you see this message frequently.\n");
    998
    999err_silent:
   1000	if (ar->rx_failover_missing) {
   1001		skb_reset_tail_pointer(ar->rx_failover);
   1002		skb_trim(ar->rx_failover, 0);
   1003		ar->rx_failover_missing = 0;
   1004	}
   1005}
   1006
   1007void carl9170_rx(struct ar9170 *ar, void *buf, unsigned int len)
   1008{
   1009	if (ar->fw.rx_stream)
   1010		carl9170_rx_stream(ar, buf, len);
   1011	else
   1012		__carl9170_rx(ar, buf, len);
   1013}