d11.h (56963B)
1/* 2 * Copyright (c) 2010 Broadcom Corporation 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17#ifndef _BRCM_D11_H_ 18#define _BRCM_D11_H_ 19 20#include <linux/ieee80211.h> 21 22#include <defs.h> 23#include "pub.h" 24#include "dma.h" 25 26/* RX FIFO numbers */ 27#define RX_FIFO 0 /* data and ctl frames */ 28#define RX_TXSTATUS_FIFO 3 /* RX fifo for tx status packages */ 29 30/* TX FIFO numbers using WME Access Category */ 31#define TX_AC_BK_FIFO 0 /* Background TX FIFO */ 32#define TX_AC_BE_FIFO 1 /* Best-Effort TX FIFO */ 33#define TX_AC_VI_FIFO 2 /* Video TX FIFO */ 34#define TX_AC_VO_FIFO 3 /* Voice TX FIFO */ 35#define TX_BCMC_FIFO 4 /* Broadcast/Multicast TX FIFO */ 36#define TX_ATIM_FIFO 5 /* TX fifo for ATIM window info */ 37 38/* Addr is byte address used by SW; offset is word offset used by uCode */ 39 40/* Per AC TX limit settings */ 41#define M_AC_TXLMT_BASE_ADDR (0x180 * 2) 42#define M_AC_TXLMT_ADDR(_ac) (M_AC_TXLMT_BASE_ADDR + (2 * (_ac))) 43 44/* Legacy TX FIFO numbers */ 45#define TX_DATA_FIFO TX_AC_BE_FIFO 46#define TX_CTL_FIFO TX_AC_VO_FIFO 47 48#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ 49 50struct intctrlregs { 51 u32 intstatus; 52 u32 intmask; 53}; 54 55/* PIO structure, 56 * support two PIO format: 2 bytes access and 4 bytes access 57 * basic FIFO register set is per channel(transmit or receive) 58 * a pair of channels is defined for convenience 59 */ 60/* 2byte-wide pio register set per channel(xmt or rcv) */ 61struct pio2regs { 62 u16 fifocontrol; 63 u16 fifodata; 64 u16 fifofree; /* only valid in xmt channel, not in rcv channel */ 65 u16 PAD; 66}; 67 68/* a pair of pio channels(tx and rx) */ 69struct pio2regp { 70 struct pio2regs tx; 71 struct pio2regs rx; 72}; 73 74/* 4byte-wide pio register set per channel(xmt or rcv) */ 75struct pio4regs { 76 u32 fifocontrol; 77 u32 fifodata; 78}; 79 80/* a pair of pio channels(tx and rx) */ 81struct pio4regp { 82 struct pio4regs tx; 83 struct pio4regs rx; 84}; 85 86/* read: 32-bit register that can be read as 32-bit or as 2 16-bit 87 * write: only low 16b-it half can be written 88 */ 89union pmqreg { 90 u32 pmqhostdata; /* read only! */ 91 struct { 92 u16 pmqctrlstatus; /* read/write */ 93 u16 PAD; 94 } w; 95}; 96 97struct fifo64 { 98 struct dma64regs dmaxmt; /* dma tx */ 99 struct pio4regs piotx; /* pio tx */ 100 struct dma64regs dmarcv; /* dma rx */ 101 struct pio4regs piorx; /* pio rx */ 102}; 103 104/* 105 * Host Interface Registers 106 */ 107struct d11regs { 108 /* Device Control ("semi-standard host registers") */ 109 u32 PAD[3]; /* 0x0 - 0x8 */ 110 u32 biststatus; /* 0xC */ 111 u32 biststatus2; /* 0x10 */ 112 u32 PAD; /* 0x14 */ 113 u32 gptimer; /* 0x18 */ 114 u32 usectimer; /* 0x1c *//* for corerev >= 26 */ 115 116 /* Interrupt Control *//* 0x20 */ 117 struct intctrlregs intctrlregs[8]; 118 119 u32 PAD[40]; /* 0x60 - 0xFC */ 120 121 u32 intrcvlazy[4]; /* 0x100 - 0x10C */ 122 123 u32 PAD[4]; /* 0x110 - 0x11c */ 124 125 u32 maccontrol; /* 0x120 */ 126 u32 maccommand; /* 0x124 */ 127 u32 macintstatus; /* 0x128 */ 128 u32 macintmask; /* 0x12C */ 129 130 /* Transmit Template Access */ 131 u32 tplatewrptr; /* 0x130 */ 132 u32 tplatewrdata; /* 0x134 */ 133 u32 PAD[2]; /* 0x138 - 0x13C */ 134 135 /* PMQ registers */ 136 union pmqreg pmqreg; /* 0x140 */ 137 u32 pmqpatl; /* 0x144 */ 138 u32 pmqpath; /* 0x148 */ 139 u32 PAD; /* 0x14C */ 140 141 u32 chnstatus; /* 0x150 */ 142 u32 psmdebug; /* 0x154 */ 143 u32 phydebug; /* 0x158 */ 144 u32 machwcap; /* 0x15C */ 145 146 /* Extended Internal Objects */ 147 u32 objaddr; /* 0x160 */ 148 u32 objdata; /* 0x164 */ 149 u32 PAD[2]; /* 0x168 - 0x16c */ 150 151 u32 frmtxstatus; /* 0x170 */ 152 u32 frmtxstatus2; /* 0x174 */ 153 u32 PAD[2]; /* 0x178 - 0x17c */ 154 155 /* TSF host access */ 156 u32 tsf_timerlow; /* 0x180 */ 157 u32 tsf_timerhigh; /* 0x184 */ 158 u32 tsf_cfprep; /* 0x188 */ 159 u32 tsf_cfpstart; /* 0x18c */ 160 u32 tsf_cfpmaxdur32; /* 0x190 */ 161 u32 PAD[3]; /* 0x194 - 0x19c */ 162 163 u32 maccontrol1; /* 0x1a0 */ 164 u32 machwcap1; /* 0x1a4 */ 165 u32 PAD[14]; /* 0x1a8 - 0x1dc */ 166 167 /* Clock control and hardware workarounds*/ 168 u32 clk_ctl_st; /* 0x1e0 */ 169 u32 hw_war; 170 u32 d11_phypllctl; /* the phypll request/avail bits are 171 * moved to clk_ctl_st 172 */ 173 u32 PAD[5]; /* 0x1ec - 0x1fc */ 174 175 /* 0x200-0x37F dma/pio registers */ 176 struct fifo64 fifo64regs[6]; 177 178 /* FIFO diagnostic port access */ 179 struct dma32diag dmafifo; /* 0x380 - 0x38C */ 180 181 u32 aggfifocnt; /* 0x390 */ 182 u32 aggfifodata; /* 0x394 */ 183 u32 PAD[16]; /* 0x398 - 0x3d4 */ 184 u16 radioregaddr; /* 0x3d8 */ 185 u16 radioregdata; /* 0x3da */ 186 187 /* 188 * time delay between the change on rf disable input and 189 * radio shutdown 190 */ 191 u32 rfdisabledly; /* 0x3DC */ 192 193 /* PHY register access */ 194 u16 phyversion; /* 0x3e0 - 0x0 */ 195 u16 phybbconfig; /* 0x3e2 - 0x1 */ 196 u16 phyadcbias; /* 0x3e4 - 0x2 Bphy only */ 197 u16 phyanacore; /* 0x3e6 - 0x3 pwwrdwn on aphy */ 198 u16 phyrxstatus0; /* 0x3e8 - 0x4 */ 199 u16 phyrxstatus1; /* 0x3ea - 0x5 */ 200 u16 phycrsth; /* 0x3ec - 0x6 */ 201 u16 phytxerror; /* 0x3ee - 0x7 */ 202 u16 phychannel; /* 0x3f0 - 0x8 */ 203 u16 PAD[1]; /* 0x3f2 - 0x9 */ 204 u16 phytest; /* 0x3f4 - 0xa */ 205 u16 phy4waddr; /* 0x3f6 - 0xb */ 206 u16 phy4wdatahi; /* 0x3f8 - 0xc */ 207 u16 phy4wdatalo; /* 0x3fa - 0xd */ 208 u16 phyregaddr; /* 0x3fc - 0xe */ 209 u16 phyregdata; /* 0x3fe - 0xf */ 210 211 /* IHR *//* 0x400 - 0x7FE */ 212 213 /* RXE Block */ 214 u16 PAD[3]; /* 0x400 - 0x406 */ 215 u16 rcv_fifo_ctl; /* 0x406 */ 216 u16 PAD; /* 0x408 - 0x40a */ 217 u16 rcv_frm_cnt; /* 0x40a */ 218 u16 PAD[4]; /* 0x40a - 0x414 */ 219 u16 rssi; /* 0x414 */ 220 u16 PAD[5]; /* 0x414 - 0x420 */ 221 u16 rcm_ctl; /* 0x420 */ 222 u16 rcm_mat_data; /* 0x422 */ 223 u16 rcm_mat_mask; /* 0x424 */ 224 u16 rcm_mat_dly; /* 0x426 */ 225 u16 rcm_cond_mask_l; /* 0x428 */ 226 u16 rcm_cond_mask_h; /* 0x42A */ 227 u16 rcm_cond_dly; /* 0x42C */ 228 u16 PAD[1]; /* 0x42E */ 229 u16 ext_ihr_addr; /* 0x430 */ 230 u16 ext_ihr_data; /* 0x432 */ 231 u16 rxe_phyrs_2; /* 0x434 */ 232 u16 rxe_phyrs_3; /* 0x436 */ 233 u16 phy_mode; /* 0x438 */ 234 u16 rcmta_ctl; /* 0x43a */ 235 u16 rcmta_size; /* 0x43c */ 236 u16 rcmta_addr0; /* 0x43e */ 237 u16 rcmta_addr1; /* 0x440 */ 238 u16 rcmta_addr2; /* 0x442 */ 239 u16 PAD[30]; /* 0x444 - 0x480 */ 240 241 /* PSM Block *//* 0x480 - 0x500 */ 242 243 u16 PAD; /* 0x480 */ 244 u16 psm_maccontrol_h; /* 0x482 */ 245 u16 psm_macintstatus_l; /* 0x484 */ 246 u16 psm_macintstatus_h; /* 0x486 */ 247 u16 psm_macintmask_l; /* 0x488 */ 248 u16 psm_macintmask_h; /* 0x48A */ 249 u16 PAD; /* 0x48C */ 250 u16 psm_maccommand; /* 0x48E */ 251 u16 psm_brc; /* 0x490 */ 252 u16 psm_phy_hdr_param; /* 0x492 */ 253 u16 psm_postcard; /* 0x494 */ 254 u16 psm_pcard_loc_l; /* 0x496 */ 255 u16 psm_pcard_loc_h; /* 0x498 */ 256 u16 psm_gpio_in; /* 0x49A */ 257 u16 psm_gpio_out; /* 0x49C */ 258 u16 psm_gpio_oe; /* 0x49E */ 259 260 u16 psm_bred_0; /* 0x4A0 */ 261 u16 psm_bred_1; /* 0x4A2 */ 262 u16 psm_bred_2; /* 0x4A4 */ 263 u16 psm_bred_3; /* 0x4A6 */ 264 u16 psm_brcl_0; /* 0x4A8 */ 265 u16 psm_brcl_1; /* 0x4AA */ 266 u16 psm_brcl_2; /* 0x4AC */ 267 u16 psm_brcl_3; /* 0x4AE */ 268 u16 psm_brpo_0; /* 0x4B0 */ 269 u16 psm_brpo_1; /* 0x4B2 */ 270 u16 psm_brpo_2; /* 0x4B4 */ 271 u16 psm_brpo_3; /* 0x4B6 */ 272 u16 psm_brwk_0; /* 0x4B8 */ 273 u16 psm_brwk_1; /* 0x4BA */ 274 u16 psm_brwk_2; /* 0x4BC */ 275 u16 psm_brwk_3; /* 0x4BE */ 276 277 u16 psm_base_0; /* 0x4C0 */ 278 u16 psm_base_1; /* 0x4C2 */ 279 u16 psm_base_2; /* 0x4C4 */ 280 u16 psm_base_3; /* 0x4C6 */ 281 u16 psm_base_4; /* 0x4C8 */ 282 u16 psm_base_5; /* 0x4CA */ 283 u16 psm_base_6; /* 0x4CC */ 284 u16 psm_pc_reg_0; /* 0x4CE */ 285 u16 psm_pc_reg_1; /* 0x4D0 */ 286 u16 psm_pc_reg_2; /* 0x4D2 */ 287 u16 psm_pc_reg_3; /* 0x4D4 */ 288 u16 PAD[0xD]; /* 0x4D6 - 0x4DE */ 289 u16 psm_corectlsts; /* 0x4f0 *//* Corerev >= 13 */ 290 u16 PAD[0x7]; /* 0x4f2 - 0x4fE */ 291 292 /* TXE0 Block *//* 0x500 - 0x580 */ 293 u16 txe_ctl; /* 0x500 */ 294 u16 txe_aux; /* 0x502 */ 295 u16 txe_ts_loc; /* 0x504 */ 296 u16 txe_time_out; /* 0x506 */ 297 u16 txe_wm_0; /* 0x508 */ 298 u16 txe_wm_1; /* 0x50A */ 299 u16 txe_phyctl; /* 0x50C */ 300 u16 txe_status; /* 0x50E */ 301 u16 txe_mmplcp0; /* 0x510 */ 302 u16 txe_mmplcp1; /* 0x512 */ 303 u16 txe_phyctl1; /* 0x514 */ 304 305 u16 PAD[0x05]; /* 0x510 - 0x51E */ 306 307 /* Transmit control */ 308 u16 xmtfifodef; /* 0x520 */ 309 u16 xmtfifo_frame_cnt; /* 0x522 *//* Corerev >= 16 */ 310 u16 xmtfifo_byte_cnt; /* 0x524 *//* Corerev >= 16 */ 311 u16 xmtfifo_head; /* 0x526 *//* Corerev >= 16 */ 312 u16 xmtfifo_rd_ptr; /* 0x528 *//* Corerev >= 16 */ 313 u16 xmtfifo_wr_ptr; /* 0x52A *//* Corerev >= 16 */ 314 u16 xmtfifodef1; /* 0x52C *//* Corerev >= 16 */ 315 316 u16 PAD[0x09]; /* 0x52E - 0x53E */ 317 318 u16 xmtfifocmd; /* 0x540 */ 319 u16 xmtfifoflush; /* 0x542 */ 320 u16 xmtfifothresh; /* 0x544 */ 321 u16 xmtfifordy; /* 0x546 */ 322 u16 xmtfifoprirdy; /* 0x548 */ 323 u16 xmtfiforqpri; /* 0x54A */ 324 u16 xmttplatetxptr; /* 0x54C */ 325 u16 PAD; /* 0x54E */ 326 u16 xmttplateptr; /* 0x550 */ 327 u16 smpl_clct_strptr; /* 0x552 *//* Corerev >= 22 */ 328 u16 smpl_clct_stpptr; /* 0x554 *//* Corerev >= 22 */ 329 u16 smpl_clct_curptr; /* 0x556 *//* Corerev >= 22 */ 330 u16 PAD[0x04]; /* 0x558 - 0x55E */ 331 u16 xmttplatedatalo; /* 0x560 */ 332 u16 xmttplatedatahi; /* 0x562 */ 333 334 u16 PAD[2]; /* 0x564 - 0x566 */ 335 336 u16 xmtsel; /* 0x568 */ 337 u16 xmttxcnt; /* 0x56A */ 338 u16 xmttxshmaddr; /* 0x56C */ 339 340 u16 PAD[0x09]; /* 0x56E - 0x57E */ 341 342 /* TXE1 Block */ 343 u16 PAD[0x40]; /* 0x580 - 0x5FE */ 344 345 /* TSF Block */ 346 u16 PAD[0X02]; /* 0x600 - 0x602 */ 347 u16 tsf_cfpstrt_l; /* 0x604 */ 348 u16 tsf_cfpstrt_h; /* 0x606 */ 349 u16 PAD[0X05]; /* 0x608 - 0x610 */ 350 u16 tsf_cfppretbtt; /* 0x612 */ 351 u16 PAD[0XD]; /* 0x614 - 0x62C */ 352 u16 tsf_clk_frac_l; /* 0x62E */ 353 u16 tsf_clk_frac_h; /* 0x630 */ 354 u16 PAD[0X14]; /* 0x632 - 0x658 */ 355 u16 tsf_random; /* 0x65A */ 356 u16 PAD[0x05]; /* 0x65C - 0x664 */ 357 /* GPTimer 2 registers */ 358 u16 tsf_gpt2_stat; /* 0x666 */ 359 u16 tsf_gpt2_ctr_l; /* 0x668 */ 360 u16 tsf_gpt2_ctr_h; /* 0x66A */ 361 u16 tsf_gpt2_val_l; /* 0x66C */ 362 u16 tsf_gpt2_val_h; /* 0x66E */ 363 u16 tsf_gptall_stat; /* 0x670 */ 364 u16 PAD[0x07]; /* 0x672 - 0x67E */ 365 366 /* IFS Block */ 367 u16 ifs_sifs_rx_tx_tx; /* 0x680 */ 368 u16 ifs_sifs_nav_tx; /* 0x682 */ 369 u16 ifs_slot; /* 0x684 */ 370 u16 PAD; /* 0x686 */ 371 u16 ifs_ctl; /* 0x688 */ 372 u16 PAD[0x3]; /* 0x68a - 0x68F */ 373 u16 ifsstat; /* 0x690 */ 374 u16 ifsmedbusyctl; /* 0x692 */ 375 u16 iftxdur; /* 0x694 */ 376 u16 PAD[0x3]; /* 0x696 - 0x69b */ 377 /* EDCF support in dot11macs */ 378 u16 ifs_aifsn; /* 0x69c */ 379 u16 ifs_ctl1; /* 0x69e */ 380 381 /* slow clock registers */ 382 u16 scc_ctl; /* 0x6a0 */ 383 u16 scc_timer_l; /* 0x6a2 */ 384 u16 scc_timer_h; /* 0x6a4 */ 385 u16 scc_frac; /* 0x6a6 */ 386 u16 scc_fastpwrup_dly; /* 0x6a8 */ 387 u16 scc_per; /* 0x6aa */ 388 u16 scc_per_frac; /* 0x6ac */ 389 u16 scc_cal_timer_l; /* 0x6ae */ 390 u16 scc_cal_timer_h; /* 0x6b0 */ 391 u16 PAD; /* 0x6b2 */ 392 393 u16 PAD[0x26]; 394 395 /* NAV Block */ 396 u16 nav_ctl; /* 0x700 */ 397 u16 navstat; /* 0x702 */ 398 u16 PAD[0x3e]; /* 0x702 - 0x77E */ 399 400 /* WEP/PMQ Block *//* 0x780 - 0x7FE */ 401 u16 PAD[0x20]; /* 0x780 - 0x7BE */ 402 403 u16 wepctl; /* 0x7C0 */ 404 u16 wepivloc; /* 0x7C2 */ 405 u16 wepivkey; /* 0x7C4 */ 406 u16 wepwkey; /* 0x7C6 */ 407 408 u16 PAD[4]; /* 0x7C8 - 0x7CE */ 409 u16 pcmctl; /* 0X7D0 */ 410 u16 pcmstat; /* 0X7D2 */ 411 u16 PAD[6]; /* 0x7D4 - 0x7DE */ 412 413 u16 pmqctl; /* 0x7E0 */ 414 u16 pmqstatus; /* 0x7E2 */ 415 u16 pmqpat0; /* 0x7E4 */ 416 u16 pmqpat1; /* 0x7E6 */ 417 u16 pmqpat2; /* 0x7E8 */ 418 419 u16 pmqdat; /* 0x7EA */ 420 u16 pmqdator; /* 0x7EC */ 421 u16 pmqhst; /* 0x7EE */ 422 u16 pmqpath0; /* 0x7F0 */ 423 u16 pmqpath1; /* 0x7F2 */ 424 u16 pmqpath2; /* 0x7F4 */ 425 u16 pmqdath; /* 0x7F6 */ 426 427 u16 PAD[0x04]; /* 0x7F8 - 0x7FE */ 428 429 /* SHM *//* 0x800 - 0xEFE */ 430 u16 PAD[0x380]; /* 0x800 - 0xEFE */ 431}; 432 433/* d11 register field offset */ 434#define D11REGOFFS(field) offsetof(struct d11regs, field) 435 436#define PIHR_BASE 0x0400 /* byte address of packed IHR region */ 437 438/* biststatus */ 439#define BT_DONE (1U << 31) /* bist done */ 440#define BT_B2S (1 << 30) /* bist2 ram summary bit */ 441 442/* intstatus and intmask */ 443#define I_PC (1 << 10) /* pci descriptor error */ 444#define I_PD (1 << 11) /* pci data error */ 445#define I_DE (1 << 12) /* descriptor protocol error */ 446#define I_RU (1 << 13) /* receive descriptor underflow */ 447#define I_RO (1 << 14) /* receive fifo overflow */ 448#define I_XU (1 << 15) /* transmit fifo underflow */ 449#define I_RI (1 << 16) /* receive interrupt */ 450#define I_XI (1 << 24) /* transmit interrupt */ 451 452/* interrupt receive lazy */ 453#define IRL_TO_MASK 0x00ffffff /* timeout */ 454#define IRL_FC_MASK 0xff000000 /* frame count */ 455#define IRL_FC_SHIFT 24 /* frame count */ 456 457/*== maccontrol register ==*/ 458#define MCTL_GMODE (1U << 31) 459#define MCTL_DISCARD_PMQ (1 << 30) 460#define MCTL_TBTTHOLD (1 << 28) 461#define MCTL_WAKE (1 << 26) 462#define MCTL_HPS (1 << 25) 463#define MCTL_PROMISC (1 << 24) 464#define MCTL_KEEPBADFCS (1 << 23) 465#define MCTL_KEEPCONTROL (1 << 22) 466#define MCTL_PHYLOCK (1 << 21) 467#define MCTL_BCNS_PROMISC (1 << 20) 468#define MCTL_LOCK_RADIO (1 << 19) 469#define MCTL_AP (1 << 18) 470#define MCTL_INFRA (1 << 17) 471#define MCTL_BIGEND (1 << 16) 472#define MCTL_GPOUT_SEL_MASK (3 << 14) 473#define MCTL_GPOUT_SEL_SHIFT 14 474#define MCTL_EN_PSMDBG (1 << 13) 475#define MCTL_IHR_EN (1 << 10) 476#define MCTL_SHM_UPPER (1 << 9) 477#define MCTL_SHM_EN (1 << 8) 478#define MCTL_PSM_JMP_0 (1 << 2) 479#define MCTL_PSM_RUN (1 << 1) 480#define MCTL_EN_MAC (1 << 0) 481 482/*== maccommand register ==*/ 483#define MCMD_BCN0VLD (1 << 0) 484#define MCMD_BCN1VLD (1 << 1) 485#define MCMD_DIRFRMQVAL (1 << 2) 486#define MCMD_CCA (1 << 3) 487#define MCMD_BG_NOISE (1 << 4) 488#define MCMD_SKIP_SHMINIT (1 << 5) /* only used for simulation */ 489#define MCMD_SAMPLECOLL MCMD_SKIP_SHMINIT /* reuse for sample collect */ 490 491/*== macintstatus/macintmask ==*/ 492/* gracefully suspended */ 493#define MI_MACSSPNDD (1 << 0) 494/* beacon template available */ 495#define MI_BCNTPL (1 << 1) 496/* TBTT indication */ 497#define MI_TBTT (1 << 2) 498/* beacon successfully tx'd */ 499#define MI_BCNSUCCESS (1 << 3) 500/* beacon canceled (IBSS) */ 501#define MI_BCNCANCLD (1 << 4) 502/* end of ATIM-window (IBSS) */ 503#define MI_ATIMWINEND (1 << 5) 504/* PMQ entries available */ 505#define MI_PMQ (1 << 6) 506/* non-specific gen-stat bits that are set by PSM */ 507#define MI_NSPECGEN_0 (1 << 7) 508/* non-specific gen-stat bits that are set by PSM */ 509#define MI_NSPECGEN_1 (1 << 8) 510/* MAC level Tx error */ 511#define MI_MACTXERR (1 << 9) 512/* non-specific gen-stat bits that are set by PSM */ 513#define MI_NSPECGEN_3 (1 << 10) 514/* PHY Tx error */ 515#define MI_PHYTXERR (1 << 11) 516/* Power Management Event */ 517#define MI_PME (1 << 12) 518/* General-purpose timer0 */ 519#define MI_GP0 (1 << 13) 520/* General-purpose timer1 */ 521#define MI_GP1 (1 << 14) 522/* (ORed) DMA-interrupts */ 523#define MI_DMAINT (1 << 15) 524/* MAC has completed a TX FIFO Suspend/Flush */ 525#define MI_TXSTOP (1 << 16) 526/* MAC has completed a CCA measurement */ 527#define MI_CCA (1 << 17) 528/* MAC has collected background noise samples */ 529#define MI_BG_NOISE (1 << 18) 530/* MBSS DTIM TBTT indication */ 531#define MI_DTIM_TBTT (1 << 19) 532/* Probe response queue needs attention */ 533#define MI_PRQ (1 << 20) 534/* Radio/PHY has been powered back up. */ 535#define MI_PWRUP (1 << 21) 536#define MI_RESERVED3 (1 << 22) 537#define MI_RESERVED2 (1 << 23) 538#define MI_RESERVED1 (1 << 25) 539/* MAC detected change on RF Disable input*/ 540#define MI_RFDISABLE (1 << 28) 541/* MAC has completed a TX */ 542#define MI_TFS (1 << 29) 543/* A phy status change wrt G mode */ 544#define MI_PHYCHANGED (1 << 30) 545/* general purpose timeout */ 546#define MI_TO (1U << 31) 547 548/* Mac capabilities registers */ 549/*== machwcap ==*/ 550#define MCAP_TKIPMIC 0x80000000 /* TKIP MIC hardware present */ 551 552/*== pmqhost data ==*/ 553/* data entry of head pmq entry */ 554#define PMQH_DATA_MASK 0xffff0000 555/* PM entry for BSS config */ 556#define PMQH_BSSCFG 0x00100000 557/* PM Mode OFF: power save off */ 558#define PMQH_PMOFF 0x00010000 559/* PM Mode ON: power save on */ 560#define PMQH_PMON 0x00020000 561/* Dis-associated or De-authenticated */ 562#define PMQH_DASAT 0x00040000 563/* ATIM not acknowledged */ 564#define PMQH_ATIMFAIL 0x00080000 565/* delete head entry */ 566#define PMQH_DEL_ENTRY 0x00000001 567/* delete head entry to cur read pointer -1 */ 568#define PMQH_DEL_MULT 0x00000002 569/* pmq overflow indication */ 570#define PMQH_OFLO 0x00000004 571/* entries are present in pmq */ 572#define PMQH_NOT_EMPTY 0x00000008 573 574/*== phydebug ==*/ 575/* phy is asserting carrier sense */ 576#define PDBG_CRS (1 << 0) 577/* phy is taking xmit byte from mac this cycle */ 578#define PDBG_TXA (1 << 1) 579/* mac is instructing the phy to transmit a frame */ 580#define PDBG_TXF (1 << 2) 581/* phy is signalling a transmit Error to the mac */ 582#define PDBG_TXE (1 << 3) 583/* phy detected the end of a valid frame preamble */ 584#define PDBG_RXF (1 << 4) 585/* phy detected the end of a valid PLCP header */ 586#define PDBG_RXS (1 << 5) 587/* rx start not asserted */ 588#define PDBG_RXFRG (1 << 6) 589/* mac is taking receive byte from phy this cycle */ 590#define PDBG_RXV (1 << 7) 591/* RF portion of the radio is disabled */ 592#define PDBG_RFD (1 << 16) 593 594/*== objaddr register ==*/ 595#define OBJADDR_SEL_MASK 0x000F0000 596#define OBJADDR_UCM_SEL 0x00000000 597#define OBJADDR_SHM_SEL 0x00010000 598#define OBJADDR_SCR_SEL 0x00020000 599#define OBJADDR_IHR_SEL 0x00030000 600#define OBJADDR_RCMTA_SEL 0x00040000 601#define OBJADDR_SRCHM_SEL 0x00060000 602#define OBJADDR_WINC 0x01000000 603#define OBJADDR_RINC 0x02000000 604#define OBJADDR_AUTO_INC 0x03000000 605 606#define WEP_PCMADDR 0x07d4 607#define WEP_PCMDATA 0x07d6 608 609/*== frmtxstatus ==*/ 610#define TXS_V (1 << 0) /* valid bit */ 611#define TXS_STATUS_MASK 0xffff 612#define TXS_FID_MASK 0xffff0000 613#define TXS_FID_SHIFT 16 614 615/*== frmtxstatus2 ==*/ 616#define TXS_SEQ_MASK 0xffff 617#define TXS_PTX_MASK 0xff0000 618#define TXS_PTX_SHIFT 16 619#define TXS_MU_MASK 0x01000000 620#define TXS_MU_SHIFT 24 621 622/*== clk_ctl_st ==*/ 623#define CCS_ERSRC_REQ_D11PLL 0x00000100 /* d11 core pll request */ 624#define CCS_ERSRC_REQ_PHYPLL 0x00000200 /* PHY pll request */ 625#define CCS_ERSRC_AVAIL_D11PLL 0x01000000 /* d11 core pll available */ 626#define CCS_ERSRC_AVAIL_PHYPLL 0x02000000 /* PHY pll available */ 627 628/* HT Cloclk Ctrl and Clock Avail for 4313 */ 629#define CCS_ERSRC_REQ_HT 0x00000010 /* HT avail request */ 630#define CCS_ERSRC_AVAIL_HT 0x00020000 /* HT clock available */ 631 632/* tsf_cfprep register */ 633#define CFPREP_CBI_MASK 0xffffffc0 634#define CFPREP_CBI_SHIFT 6 635#define CFPREP_CFPP 0x00000001 636 637/* tx fifo sizes values are in terms of 256 byte blocks */ 638#define TXFIFOCMD_RESET_MASK (1 << 15) /* reset */ 639#define TXFIFOCMD_FIFOSEL_SHIFT 8 /* fifo */ 640#define TXFIFO_FIFOTOP_SHIFT 8 /* fifo start */ 641 642#define TXFIFO_START_BLK16 65 /* Base address + 32 * 512 B/P */ 643#define TXFIFO_START_BLK 6 /* Base address + 6 * 256 B */ 644#define TXFIFO_SIZE_UNIT 256 /* one unit corresponds to 256 bytes */ 645#define MBSS16_TEMPLMEM_MINBLKS 65 /* one unit corresponds to 256 bytes */ 646 647/*== phy versions (PhyVersion:Revision field) ==*/ 648/* analog block version */ 649#define PV_AV_MASK 0xf000 650/* analog block version bitfield offset */ 651#define PV_AV_SHIFT 12 652/* phy type */ 653#define PV_PT_MASK 0x0f00 654/* phy type bitfield offset */ 655#define PV_PT_SHIFT 8 656/* phy version */ 657#define PV_PV_MASK 0x000f 658#define PHY_TYPE(v) ((v & PV_PT_MASK) >> PV_PT_SHIFT) 659 660/*== phy types (PhyVersion:PhyType field) ==*/ 661#define PHY_TYPE_N 4 /* N-Phy value */ 662#define PHY_TYPE_SSN 6 /* SSLPN-Phy value */ 663#define PHY_TYPE_LCN 8 /* LCN-Phy value */ 664#define PHY_TYPE_LCNXN 9 /* LCNXN-Phy value */ 665#define PHY_TYPE_NULL 0xf /* Invalid Phy value */ 666 667/*== analog types (PhyVersion:AnalogType field) ==*/ 668#define ANA_11N_013 5 669 670/* 802.11a PLCP header def */ 671struct ofdm_phy_hdr { 672 u8 rlpt[3]; /* rate, length, parity, tail */ 673 u16 service; 674 u8 pad; 675} __packed; 676 677#define D11A_PHY_HDR_GRATE(phdr) ((phdr)->rlpt[0] & 0x0f) 678#define D11A_PHY_HDR_GRES(phdr) (((phdr)->rlpt[0] >> 4) & 0x01) 679#define D11A_PHY_HDR_GLENGTH(phdr) (((u32 *)((phdr)->rlpt) >> 5) & 0x0fff) 680#define D11A_PHY_HDR_GPARITY(phdr) (((phdr)->rlpt[3] >> 1) & 0x01) 681#define D11A_PHY_HDR_GTAIL(phdr) (((phdr)->rlpt[3] >> 2) & 0x3f) 682 683/* rate encoded per 802.11a-1999 sec 17.3.4.1 */ 684#define D11A_PHY_HDR_SRATE(phdr, rate) \ 685 ((phdr)->rlpt[0] = ((phdr)->rlpt[0] & 0xf0) | ((rate) & 0xf)) 686/* set reserved field to zero */ 687#define D11A_PHY_HDR_SRES(phdr) ((phdr)->rlpt[0] &= 0xef) 688/* length is number of octets in PSDU */ 689#define D11A_PHY_HDR_SLENGTH(phdr, length) \ 690 (*(u32 *)((phdr)->rlpt) = *(u32 *)((phdr)->rlpt) | \ 691 (((length) & 0x0fff) << 5)) 692/* set the tail to all zeros */ 693#define D11A_PHY_HDR_STAIL(phdr) ((phdr)->rlpt[3] &= 0x03) 694 695#define D11A_PHY_HDR_LEN_L 3 /* low-rate part of PLCP header */ 696#define D11A_PHY_HDR_LEN_R 2 /* high-rate part of PLCP header */ 697 698#define D11A_PHY_TX_DELAY (2) /* 2.1 usec */ 699 700#define D11A_PHY_HDR_TIME (4) /* low-rate part of PLCP header */ 701#define D11A_PHY_PRE_TIME (16) 702#define D11A_PHY_PREHDR_TIME (D11A_PHY_PRE_TIME + D11A_PHY_HDR_TIME) 703 704/* 802.11b PLCP header def */ 705struct cck_phy_hdr { 706 u8 signal; 707 u8 service; 708 u16 length; 709 u16 crc; 710} __packed; 711 712#define D11B_PHY_HDR_LEN 6 713 714#define D11B_PHY_TX_DELAY (3) /* 3.4 usec */ 715 716#define D11B_PHY_LHDR_TIME (D11B_PHY_HDR_LEN << 3) 717#define D11B_PHY_LPRE_TIME (144) 718#define D11B_PHY_LPREHDR_TIME (D11B_PHY_LPRE_TIME + D11B_PHY_LHDR_TIME) 719 720#define D11B_PHY_SHDR_TIME (D11B_PHY_LHDR_TIME >> 1) 721#define D11B_PHY_SPRE_TIME (D11B_PHY_LPRE_TIME >> 1) 722#define D11B_PHY_SPREHDR_TIME (D11B_PHY_SPRE_TIME + D11B_PHY_SHDR_TIME) 723 724#define D11B_PLCP_SIGNAL_LOCKED (1 << 2) 725#define D11B_PLCP_SIGNAL_LE (1 << 7) 726 727#define MIMO_PLCP_MCS_MASK 0x7f /* mcs index */ 728#define MIMO_PLCP_40MHZ 0x80 /* 40 Hz frame */ 729#define MIMO_PLCP_AMPDU 0x08 /* ampdu */ 730 731#define BRCMS_GET_CCK_PLCP_LEN(plcp) (plcp[4] + (plcp[5] << 8)) 732#define BRCMS_GET_MIMO_PLCP_LEN(plcp) (plcp[1] + (plcp[2] << 8)) 733#define BRCMS_SET_MIMO_PLCP_LEN(plcp, len) \ 734 do { \ 735 plcp[1] = len & 0xff; \ 736 plcp[2] = ((len >> 8) & 0xff); \ 737 } while (0) 738 739#define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU) 740#define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU) 741#define BRCMS_IS_MIMO_PLCP_AMPDU(plcp) (plcp[3] & MIMO_PLCP_AMPDU) 742 743/* 744 * The dot11a PLCP header is 5 bytes. To simplify the software (so that we 745 * don't need e.g. different tx DMA headers for 11a and 11b), the PLCP header 746 * has padding added in the ucode. 747 */ 748#define D11_PHY_HDR_LEN 6 749 750/* TX DMA buffer header */ 751struct d11txh { 752 __le16 MacTxControlLow; /* 0x0 */ 753 __le16 MacTxControlHigh; /* 0x1 */ 754 __le16 MacFrameControl; /* 0x2 */ 755 __le16 TxFesTimeNormal; /* 0x3 */ 756 __le16 PhyTxControlWord; /* 0x4 */ 757 __le16 PhyTxControlWord_1; /* 0x5 */ 758 __le16 PhyTxControlWord_1_Fbr; /* 0x6 */ 759 __le16 PhyTxControlWord_1_Rts; /* 0x7 */ 760 __le16 PhyTxControlWord_1_FbrRts; /* 0x8 */ 761 __le16 MainRates; /* 0x9 */ 762 __le16 XtraFrameTypes; /* 0xa */ 763 u8 IV[16]; /* 0x0b - 0x12 */ 764 u8 TxFrameRA[6]; /* 0x13 - 0x15 */ 765 __le16 TxFesTimeFallback; /* 0x16 */ 766 u8 RTSPLCPFallback[6]; /* 0x17 - 0x19 */ 767 __le16 RTSDurFallback; /* 0x1a */ 768 u8 FragPLCPFallback[6]; /* 0x1b - 1d */ 769 __le16 FragDurFallback; /* 0x1e */ 770 __le16 MModeLen; /* 0x1f */ 771 __le16 MModeFbrLen; /* 0x20 */ 772 __le16 TstampLow; /* 0x21 */ 773 __le16 TstampHigh; /* 0x22 */ 774 __le16 ABI_MimoAntSel; /* 0x23 */ 775 __le16 PreloadSize; /* 0x24 */ 776 __le16 AmpduSeqCtl; /* 0x25 */ 777 __le16 TxFrameID; /* 0x26 */ 778 __le16 TxStatus; /* 0x27 */ 779 __le16 MaxNMpdus; /* 0x28 */ 780 __le16 MaxABytes_MRT; /* 0x29 */ 781 __le16 MaxABytes_FBR; /* 0x2a */ 782 __le16 MinMBytes; /* 0x2b */ 783 u8 RTSPhyHeader[D11_PHY_HDR_LEN]; /* 0x2c - 0x2e */ 784 struct ieee80211_rts rts_frame; /* 0x2f - 0x36 */ 785 u16 PAD; /* 0x37 */ 786} __packed __aligned(2); 787 788#define D11_TXH_LEN 112 /* bytes */ 789 790/* Frame Types */ 791#define FT_CCK 0 792#define FT_OFDM 1 793#define FT_HT 2 794#define FT_N 3 795 796/* 797 * Position of MPDU inside A-MPDU; indicated with bits 10:9 798 * of MacTxControlLow 799 */ 800#define TXC_AMPDU_SHIFT 9 /* shift for ampdu settings */ 801#define TXC_AMPDU_NONE 0 /* Regular MPDU, not an A-MPDU */ 802#define TXC_AMPDU_FIRST 1 /* first MPDU of an A-MPDU */ 803#define TXC_AMPDU_MIDDLE 2 /* intermediate MPDU of an A-MPDU */ 804#define TXC_AMPDU_LAST 3 /* last (or single) MPDU of an A-MPDU */ 805 806/*== MacTxControlLow ==*/ 807#define TXC_AMIC 0x8000 808#define TXC_SENDCTS 0x0800 809#define TXC_AMPDU_MASK 0x0600 810#define TXC_BW_40 0x0100 811#define TXC_FREQBAND_5G 0x0080 812#define TXC_DFCS 0x0040 813#define TXC_IGNOREPMQ 0x0020 814#define TXC_HWSEQ 0x0010 815#define TXC_STARTMSDU 0x0008 816#define TXC_SENDRTS 0x0004 817#define TXC_LONGFRAME 0x0002 818#define TXC_IMMEDACK 0x0001 819 820/*== MacTxControlHigh ==*/ 821/* RTS fallback preamble type 1 = SHORT 0 = LONG */ 822#define TXC_PREAMBLE_RTS_FB_SHORT 0x8000 823/* RTS main rate preamble type 1 = SHORT 0 = LONG */ 824#define TXC_PREAMBLE_RTS_MAIN_SHORT 0x4000 825/* 826 * Main fallback rate preamble type 827 * 1 = SHORT for OFDM/GF for MIMO 828 * 0 = LONG for CCK/MM for MIMO 829 */ 830#define TXC_PREAMBLE_DATA_FB_SHORT 0x2000 831 832/* TXC_PREAMBLE_DATA_MAIN is in PhyTxControl bit 5 */ 833/* use fallback rate for this AMPDU */ 834#define TXC_AMPDU_FBR 0x1000 835#define TXC_SECKEY_MASK 0x0FF0 836#define TXC_SECKEY_SHIFT 4 837/* Use alternate txpwr defined at loc. M_ALT_TXPWR_IDX */ 838#define TXC_ALT_TXPWR 0x0008 839#define TXC_SECTYPE_MASK 0x0007 840#define TXC_SECTYPE_SHIFT 0 841 842/* Null delimiter for Fallback rate */ 843#define AMPDU_FBR_NULL_DELIM 5 /* Location of Null delimiter count for AMPDU */ 844 845/* PhyTxControl for Mimophy */ 846#define PHY_TXC_PWR_MASK 0xFC00 847#define PHY_TXC_PWR_SHIFT 10 848#define PHY_TXC_ANT_MASK 0x03C0 /* bit 6, 7, 8, 9 */ 849#define PHY_TXC_ANT_SHIFT 6 850#define PHY_TXC_ANT_0_1 0x00C0 /* auto, last rx */ 851#define PHY_TXC_LCNPHY_ANT_LAST 0x0000 852#define PHY_TXC_ANT_3 0x0200 /* virtual antenna 3 */ 853#define PHY_TXC_ANT_2 0x0100 /* virtual antenna 2 */ 854#define PHY_TXC_ANT_1 0x0080 /* virtual antenna 1 */ 855#define PHY_TXC_ANT_0 0x0040 /* virtual antenna 0 */ 856#define PHY_TXC_SHORT_HDR 0x0010 857 858#define PHY_TXC_OLD_ANT_0 0x0000 859#define PHY_TXC_OLD_ANT_1 0x0100 860#define PHY_TXC_OLD_ANT_LAST 0x0300 861 862/* PhyTxControl_1 for Mimophy */ 863#define PHY_TXC1_BW_MASK 0x0007 864#define PHY_TXC1_BW_10MHZ 0 865#define PHY_TXC1_BW_10MHZ_UP 1 866#define PHY_TXC1_BW_20MHZ 2 867#define PHY_TXC1_BW_20MHZ_UP 3 868#define PHY_TXC1_BW_40MHZ 4 869#define PHY_TXC1_BW_40MHZ_DUP 5 870#define PHY_TXC1_MODE_SHIFT 3 871#define PHY_TXC1_MODE_MASK 0x0038 872#define PHY_TXC1_MODE_SISO 0 873#define PHY_TXC1_MODE_CDD 1 874#define PHY_TXC1_MODE_STBC 2 875#define PHY_TXC1_MODE_SDM 3 876 877/* PhyTxControl for HTphy that are different from Mimophy */ 878#define PHY_TXC_HTANT_MASK 0x3fC0 /* bits 6-13 */ 879 880/* XtraFrameTypes */ 881#define XFTS_RTS_FT_SHIFT 2 882#define XFTS_FBRRTS_FT_SHIFT 4 883#define XFTS_CHANNEL_SHIFT 8 884 885/* Antenna diversity bit in ant_wr_settle */ 886#define PHY_AWS_ANTDIV 0x2000 887 888/* IFS ctl */ 889#define IFS_USEEDCF (1 << 2) 890 891/* IFS ctl1 */ 892#define IFS_CTL1_EDCRS (1 << 3) 893#define IFS_CTL1_EDCRS_20L (1 << 4) 894#define IFS_CTL1_EDCRS_40 (1 << 5) 895 896/* ABI_MimoAntSel */ 897#define ABI_MAS_ADDR_BMP_IDX_MASK 0x0f00 898#define ABI_MAS_ADDR_BMP_IDX_SHIFT 8 899#define ABI_MAS_FBR_ANT_PTN_MASK 0x00f0 900#define ABI_MAS_FBR_ANT_PTN_SHIFT 4 901#define ABI_MAS_MRT_ANT_PTN_MASK 0x000f 902 903/* tx status packet */ 904struct tx_status { 905 u16 framelen; 906 u16 PAD; 907 u16 frameid; 908 u16 status; 909 u16 lasttxtime; 910 u16 sequence; 911 u16 phyerr; 912 u16 ackphyrxsh; 913} __packed; 914 915#define TXSTATUS_LEN 16 916 917/* status field bit definitions */ 918#define TX_STATUS_FRM_RTX_MASK 0xF000 919#define TX_STATUS_FRM_RTX_SHIFT 12 920#define TX_STATUS_RTS_RTX_MASK 0x0F00 921#define TX_STATUS_RTS_RTX_SHIFT 8 922#define TX_STATUS_MASK 0x00FE 923#define TX_STATUS_PMINDCTD (1 << 7) /* PM mode indicated to AP */ 924#define TX_STATUS_INTERMEDIATE (1 << 6) /* intermediate or 1st ampdu pkg */ 925#define TX_STATUS_AMPDU (1 << 5) /* AMPDU status */ 926#define TX_STATUS_SUPR_MASK 0x1C /* suppress status bits (4:2) */ 927#define TX_STATUS_SUPR_SHIFT 2 928#define TX_STATUS_ACK_RCV (1 << 1) /* ACK received */ 929#define TX_STATUS_VALID (1 << 0) /* Tx status valid */ 930#define TX_STATUS_NO_ACK 0 931 932/* suppress status reason codes */ 933#define TX_STATUS_SUPR_PMQ (1 << 2) /* PMQ entry */ 934#define TX_STATUS_SUPR_FLUSH (2 << 2) /* flush request */ 935#define TX_STATUS_SUPR_FRAG (3 << 2) /* previous frag failure */ 936#define TX_STATUS_SUPR_TBTT (3 << 2) /* SHARED: Probe resp supr for TBTT */ 937#define TX_STATUS_SUPR_BADCH (4 << 2) /* channel mismatch */ 938#define TX_STATUS_SUPR_EXPTIME (5 << 2) /* lifetime expiry */ 939#define TX_STATUS_SUPR_UF (6 << 2) /* underflow */ 940 941/* Unexpected tx status for rate update */ 942#define TX_STATUS_UNEXP(status) \ 943 ((((status) & TX_STATUS_INTERMEDIATE) != 0) && \ 944 TX_STATUS_UNEXP_AMPDU(status)) 945 946/* Unexpected tx status for A-MPDU rate update */ 947#define TX_STATUS_UNEXP_AMPDU(status) \ 948 ((((status) & TX_STATUS_SUPR_MASK) != 0) && \ 949 (((status) & TX_STATUS_SUPR_MASK) != TX_STATUS_SUPR_EXPTIME)) 950 951#define TX_STATUS_BA_BMAP03_MASK 0xF000 /* ba bitmap 0:3 in 1st pkg */ 952#define TX_STATUS_BA_BMAP03_SHIFT 12 /* ba bitmap 0:3 in 1st pkg */ 953#define TX_STATUS_BA_BMAP47_MASK 0x001E /* ba bitmap 4:7 in 2nd pkg */ 954#define TX_STATUS_BA_BMAP47_SHIFT 3 /* ba bitmap 4:7 in 2nd pkg */ 955 956/* RXE (Receive Engine) */ 957 958/* RCM_CTL */ 959#define RCM_INC_MASK_H 0x0080 960#define RCM_INC_MASK_L 0x0040 961#define RCM_INC_DATA 0x0020 962#define RCM_INDEX_MASK 0x001F 963#define RCM_SIZE 15 964 965#define RCM_MAC_OFFSET 0 /* current MAC address */ 966#define RCM_BSSID_OFFSET 3 /* current BSSID address */ 967#define RCM_F_BSSID_0_OFFSET 6 /* foreign BSS CFP tracking */ 968#define RCM_F_BSSID_1_OFFSET 9 /* foreign BSS CFP tracking */ 969#define RCM_F_BSSID_2_OFFSET 12 /* foreign BSS CFP tracking */ 970 971#define RCM_WEP_TA0_OFFSET 16 972#define RCM_WEP_TA1_OFFSET 19 973#define RCM_WEP_TA2_OFFSET 22 974#define RCM_WEP_TA3_OFFSET 25 975 976/* PSM Block */ 977 978/* psm_phy_hdr_param bits */ 979#define MAC_PHY_RESET 1 980#define MAC_PHY_CLOCK_EN 2 981#define MAC_PHY_FORCE_CLK 4 982 983/* WEP Block */ 984 985/* WEP_WKEY */ 986#define WKEY_START (1 << 8) 987#define WKEY_SEL_MASK 0x1F 988 989/* WEP data formats */ 990 991/* the number of RCMTA entries */ 992#define RCMTA_SIZE 50 993 994#define M_ADDR_BMP_BLK (0x37e * 2) 995#define M_ADDR_BMP_BLK_SZ 12 996 997#define ADDR_BMP_RA (1 << 0) /* Receiver Address (RA) */ 998#define ADDR_BMP_TA (1 << 1) /* Transmitter Address (TA) */ 999#define ADDR_BMP_BSSID (1 << 2) /* BSSID */ 1000#define ADDR_BMP_AP (1 << 3) /* Infra-BSS Access Point */ 1001#define ADDR_BMP_STA (1 << 4) /* Infra-BSS Station */ 1002#define ADDR_BMP_RESERVED1 (1 << 5) 1003#define ADDR_BMP_RESERVED2 (1 << 6) 1004#define ADDR_BMP_RESERVED3 (1 << 7) 1005#define ADDR_BMP_BSS_IDX_MASK (3 << 8) /* BSS control block index */ 1006#define ADDR_BMP_BSS_IDX_SHIFT 8 1007 1008#define WSEC_MAX_RCMTA_KEYS 54 1009 1010/* max keys in M_TKMICKEYS_BLK */ 1011#define WSEC_MAX_TKMIC_ENGINE_KEYS 12 /* 8 + 4 default */ 1012 1013/* max RXE match registers */ 1014#define WSEC_MAX_RXE_KEYS 4 1015 1016/* SECKINDXALGO (Security Key Index & Algorithm Block) word format */ 1017/* SKL (Security Key Lookup) */ 1018#define SKL_ALGO_MASK 0x0007 1019#define SKL_ALGO_SHIFT 0 1020#define SKL_KEYID_MASK 0x0008 1021#define SKL_KEYID_SHIFT 3 1022#define SKL_INDEX_MASK 0x03F0 1023#define SKL_INDEX_SHIFT 4 1024#define SKL_GRP_ALGO_MASK 0x1c00 1025#define SKL_GRP_ALGO_SHIFT 10 1026 1027/* additional bits defined for IBSS group key support */ 1028#define SKL_IBSS_INDEX_MASK 0x01F0 1029#define SKL_IBSS_INDEX_SHIFT 4 1030#define SKL_IBSS_KEYID1_MASK 0x0600 1031#define SKL_IBSS_KEYID1_SHIFT 9 1032#define SKL_IBSS_KEYID2_MASK 0x1800 1033#define SKL_IBSS_KEYID2_SHIFT 11 1034#define SKL_IBSS_KEYALGO_MASK 0xE000 1035#define SKL_IBSS_KEYALGO_SHIFT 13 1036 1037#define WSEC_MODE_OFF 0 1038#define WSEC_MODE_HW 1 1039#define WSEC_MODE_SW 2 1040 1041#define WSEC_ALGO_OFF 0 1042#define WSEC_ALGO_WEP1 1 1043#define WSEC_ALGO_TKIP 2 1044#define WSEC_ALGO_AES 3 1045#define WSEC_ALGO_WEP128 4 1046#define WSEC_ALGO_AES_LEGACY 5 1047#define WSEC_ALGO_NALG 6 1048 1049#define AES_MODE_NONE 0 1050#define AES_MODE_CCM 1 1051 1052/* WEP_CTL (Rev 0) */ 1053#define WECR0_KEYREG_SHIFT 0 1054#define WECR0_KEYREG_MASK 0x7 1055#define WECR0_DECRYPT (1 << 3) 1056#define WECR0_IVINLINE (1 << 4) 1057#define WECR0_WEPALG_SHIFT 5 1058#define WECR0_WEPALG_MASK (0x7 << 5) 1059#define WECR0_WKEYSEL_SHIFT 8 1060#define WECR0_WKEYSEL_MASK (0x7 << 8) 1061#define WECR0_WKEYSTART (1 << 11) 1062#define WECR0_WEPINIT (1 << 14) 1063#define WECR0_ICVERR (1 << 15) 1064 1065/* Frame template map byte offsets */ 1066#define T_ACTS_TPL_BASE (0) 1067#define T_NULL_TPL_BASE (0xc * 2) 1068#define T_QNULL_TPL_BASE (0x1c * 2) 1069#define T_RR_TPL_BASE (0x2c * 2) 1070#define T_BCN0_TPL_BASE (0x34 * 2) 1071#define T_PRS_TPL_BASE (0x134 * 2) 1072#define T_BCN1_TPL_BASE (0x234 * 2) 1073#define T_TX_FIFO_TXRAM_BASE (T_ACTS_TPL_BASE + \ 1074 (TXFIFO_START_BLK * TXFIFO_SIZE_UNIT)) 1075 1076#define T_BA_TPL_BASE T_QNULL_TPL_BASE /* template area for BA */ 1077 1078#define T_RAM_ACCESS_SZ 4 /* template ram is 4 byte access only */ 1079 1080/* Shared Mem byte offsets */ 1081 1082/* Location where the ucode expects the corerev */ 1083#define M_MACHW_VER (0x00b * 2) 1084 1085/* Location where the ucode expects the MAC capabilities */ 1086#define M_MACHW_CAP_L (0x060 * 2) 1087#define M_MACHW_CAP_H (0x061 * 2) 1088 1089/* WME shared memory */ 1090#define M_EDCF_STATUS_OFF (0x007 * 2) 1091#define M_TXF_CUR_INDEX (0x018 * 2) 1092#define M_EDCF_QINFO (0x120 * 2) 1093 1094/* PS-mode related parameters */ 1095#define M_DOT11_SLOT (0x008 * 2) 1096#define M_DOT11_DTIMPERIOD (0x009 * 2) 1097#define M_NOSLPZNATDTIM (0x026 * 2) 1098 1099/* Beacon-related parameters */ 1100#define M_BCN0_FRM_BYTESZ (0x00c * 2) /* Bcn 0 template length */ 1101#define M_BCN1_FRM_BYTESZ (0x00d * 2) /* Bcn 1 template length */ 1102#define M_BCN_TXTSF_OFFSET (0x00e * 2) 1103#define M_TIMBPOS_INBEACON (0x00f * 2) 1104#define M_SFRMTXCNTFBRTHSD (0x022 * 2) 1105#define M_LFRMTXCNTFBRTHSD (0x023 * 2) 1106#define M_BCN_PCTLWD (0x02a * 2) 1107#define M_BCN_LI (0x05b * 2) /* beacon listen interval */ 1108 1109/* MAX Rx Frame len */ 1110#define M_MAXRXFRM_LEN (0x010 * 2) 1111 1112/* ACK/CTS related params */ 1113#define M_RSP_PCTLWD (0x011 * 2) 1114 1115/* Hardware Power Control */ 1116#define M_TXPWR_N (0x012 * 2) 1117#define M_TXPWR_TARGET (0x013 * 2) 1118#define M_TXPWR_MAX (0x014 * 2) 1119#define M_TXPWR_CUR (0x019 * 2) 1120 1121/* Rx-related parameters */ 1122#define M_RX_PAD_DATA_OFFSET (0x01a * 2) 1123 1124/* WEP Shared mem data */ 1125#define M_SEC_DEFIVLOC (0x01e * 2) 1126#define M_SEC_VALNUMSOFTMCHTA (0x01f * 2) 1127#define M_PHYVER (0x028 * 2) 1128#define M_PHYTYPE (0x029 * 2) 1129#define M_SECRXKEYS_PTR (0x02b * 2) 1130#define M_TKMICKEYS_PTR (0x059 * 2) 1131#define M_SECKINDXALGO_BLK (0x2ea * 2) 1132#define M_SECKINDXALGO_BLK_SZ 54 1133#define M_SECPSMRXTAMCH_BLK (0x2fa * 2) 1134#define M_TKIP_TSC_TTAK (0x18c * 2) 1135#define D11_MAX_KEY_SIZE 16 1136 1137#define M_MAX_ANTCNT (0x02e * 2) /* antenna swap threshold */ 1138 1139/* Probe response related parameters */ 1140#define M_SSIDLEN (0x024 * 2) 1141#define M_PRB_RESP_FRM_LEN (0x025 * 2) 1142#define M_PRS_MAXTIME (0x03a * 2) 1143#define M_SSID (0xb0 * 2) 1144#define M_CTXPRS_BLK (0xc0 * 2) 1145#define C_CTX_PCTLWD_POS (0x4 * 2) 1146 1147/* Delta between OFDM and CCK power in CCK power boost mode */ 1148#define M_OFDM_OFFSET (0x027 * 2) 1149 1150/* TSSI for last 4 11b/g CCK packets transmitted */ 1151#define M_B_TSSI_0 (0x02c * 2) 1152#define M_B_TSSI_1 (0x02d * 2) 1153 1154/* Host flags to turn on ucode options */ 1155#define M_HOST_FLAGS1 (0x02f * 2) 1156#define M_HOST_FLAGS2 (0x030 * 2) 1157#define M_HOST_FLAGS3 (0x031 * 2) 1158#define M_HOST_FLAGS4 (0x03c * 2) 1159#define M_HOST_FLAGS5 (0x06a * 2) 1160#define M_HOST_FLAGS_SZ 16 1161 1162#define M_RADAR_REG (0x033 * 2) 1163 1164/* TSSI for last 4 11a OFDM packets transmitted */ 1165#define M_A_TSSI_0 (0x034 * 2) 1166#define M_A_TSSI_1 (0x035 * 2) 1167 1168/* noise interference measurement */ 1169#define M_NOISE_IF_COUNT (0x034 * 2) 1170#define M_NOISE_IF_TIMEOUT (0x035 * 2) 1171 1172#define M_RF_RX_SP_REG1 (0x036 * 2) 1173 1174/* TSSI for last 4 11g OFDM packets transmitted */ 1175#define M_G_TSSI_0 (0x038 * 2) 1176#define M_G_TSSI_1 (0x039 * 2) 1177 1178/* Background noise measure */ 1179#define M_JSSI_0 (0x44 * 2) 1180#define M_JSSI_1 (0x45 * 2) 1181#define M_JSSI_AUX (0x46 * 2) 1182 1183#define M_CUR_2050_RADIOCODE (0x47 * 2) 1184 1185/* TX fifo sizes */ 1186#define M_FIFOSIZE0 (0x4c * 2) 1187#define M_FIFOSIZE1 (0x4d * 2) 1188#define M_FIFOSIZE2 (0x4e * 2) 1189#define M_FIFOSIZE3 (0x4f * 2) 1190#define D11_MAX_TX_FRMS 32 /* max frames allowed in tx fifo */ 1191 1192/* Current channel number plus upper bits */ 1193#define M_CURCHANNEL (0x50 * 2) 1194#define D11_CURCHANNEL_5G 0x0100; 1195#define D11_CURCHANNEL_40 0x0200; 1196#define D11_CURCHANNEL_MAX 0x00FF; 1197 1198/* last posted frameid on the bcmc fifo */ 1199#define M_BCMC_FID (0x54 * 2) 1200#define INVALIDFID 0xffff 1201 1202/* extended beacon phyctl bytes for 11N */ 1203#define M_BCN_PCTL1WD (0x058 * 2) 1204 1205/* idle busy ratio to duty_cycle requirement */ 1206#define M_TX_IDLE_BUSY_RATIO_X_16_CCK (0x52 * 2) 1207#define M_TX_IDLE_BUSY_RATIO_X_16_OFDM (0x5A * 2) 1208 1209/* CW RSSI for LCNPHY */ 1210#define M_LCN_RSSI_0 0x1332 1211#define M_LCN_RSSI_1 0x1338 1212#define M_LCN_RSSI_2 0x133e 1213#define M_LCN_RSSI_3 0x1344 1214 1215/* SNR for LCNPHY */ 1216#define M_LCN_SNR_A_0 0x1334 1217#define M_LCN_SNR_B_0 0x1336 1218 1219#define M_LCN_SNR_A_1 0x133a 1220#define M_LCN_SNR_B_1 0x133c 1221 1222#define M_LCN_SNR_A_2 0x1340 1223#define M_LCN_SNR_B_2 0x1342 1224 1225#define M_LCN_SNR_A_3 0x1346 1226#define M_LCN_SNR_B_3 0x1348 1227 1228#define M_LCN_LAST_RESET (81*2) 1229#define M_LCN_LAST_LOC (63*2) 1230#define M_LCNPHY_RESET_STATUS (4902) 1231#define M_LCNPHY_DSC_TIME (0x98d*2) 1232#define M_LCNPHY_RESET_CNT_DSC (0x98b*2) 1233#define M_LCNPHY_RESET_CNT (0x98c*2) 1234 1235/* Rate table offsets */ 1236#define M_RT_DIRMAP_A (0xe0 * 2) 1237#define M_RT_BBRSMAP_A (0xf0 * 2) 1238#define M_RT_DIRMAP_B (0x100 * 2) 1239#define M_RT_BBRSMAP_B (0x110 * 2) 1240 1241/* Rate table entry offsets */ 1242#define M_RT_PRS_PLCP_POS 10 1243#define M_RT_PRS_DUR_POS 16 1244#define M_RT_OFDM_PCTL1_POS 18 1245 1246#define M_20IN40_IQ (0x380 * 2) 1247 1248/* SHM locations where ucode stores the current power index */ 1249#define M_CURR_IDX1 (0x384 * 2) 1250#define M_CURR_IDX2 (0x387 * 2) 1251 1252#define M_BSCALE_ANT0 (0x5e * 2) 1253#define M_BSCALE_ANT1 (0x5f * 2) 1254 1255/* Antenna Diversity Testing */ 1256#define M_MIMO_ANTSEL_RXDFLT (0x63 * 2) 1257#define M_ANTSEL_CLKDIV (0x61 * 2) 1258#define M_MIMO_ANTSEL_TXDFLT (0x64 * 2) 1259 1260#define M_MIMO_MAXSYM (0x5d * 2) 1261#define MIMO_MAXSYM_DEF 0x8000 /* 32k */ 1262#define MIMO_MAXSYM_MAX 0xffff /* 64k */ 1263 1264#define M_WATCHDOG_8TU (0x1e * 2) 1265#define WATCHDOG_8TU_DEF 5 1266#define WATCHDOG_8TU_MAX 10 1267 1268/* Manufacturing Test Variables */ 1269/* PER test mode */ 1270#define M_PKTENG_CTRL (0x6c * 2) 1271/* IFS for TX mode */ 1272#define M_PKTENG_IFS (0x6d * 2) 1273/* Lower word of tx frmcnt/rx lostcnt */ 1274#define M_PKTENG_FRMCNT_LO (0x6e * 2) 1275/* Upper word of tx frmcnt/rx lostcnt */ 1276#define M_PKTENG_FRMCNT_HI (0x6f * 2) 1277 1278/* Index variation in vbat ripple */ 1279#define M_LCN_PWR_IDX_MAX (0x67 * 2) /* highest index read by ucode */ 1280#define M_LCN_PWR_IDX_MIN (0x66 * 2) /* lowest index read by ucode */ 1281 1282/* M_PKTENG_CTRL bit definitions */ 1283#define M_PKTENG_MODE_TX 0x0001 1284#define M_PKTENG_MODE_TX_RIFS 0x0004 1285#define M_PKTENG_MODE_TX_CTS 0x0008 1286#define M_PKTENG_MODE_RX 0x0002 1287#define M_PKTENG_MODE_RX_WITH_ACK 0x0402 1288#define M_PKTENG_MODE_MASK 0x0003 1289/* TX frames indicated in the frmcnt reg */ 1290#define M_PKTENG_FRMCNT_VLD 0x0100 1291 1292/* Sample Collect parameters (bitmap and type) */ 1293/* Trigger bitmap for sample collect */ 1294#define M_SMPL_COL_BMP (0x37d * 2) 1295/* Sample collect type */ 1296#define M_SMPL_COL_CTL (0x3b2 * 2) 1297 1298#define ANTSEL_CLKDIV_4MHZ 6 1299#define MIMO_ANTSEL_BUSY 0x4000 /* bit 14 (busy) */ 1300#define MIMO_ANTSEL_SEL 0x8000 /* bit 15 write the value */ 1301#define MIMO_ANTSEL_WAIT 50 /* 50us wait */ 1302#define MIMO_ANTSEL_OVERRIDE 0x8000 /* flag */ 1303 1304struct shm_acparams { 1305 u16 txop; 1306 u16 cwmin; 1307 u16 cwmax; 1308 u16 cwcur; 1309 u16 aifs; 1310 u16 bslots; 1311 u16 reggap; 1312 u16 status; 1313 u16 rsvd[8]; 1314} __packed; 1315#define M_EDCF_QLEN (16 * 2) 1316 1317#define WME_STATUS_NEWAC (1 << 8) 1318 1319/* M_HOST_FLAGS */ 1320#define MHFMAX 5 /* Number of valid hostflag half-word (u16) */ 1321#define MHF1 0 /* Hostflag 1 index */ 1322#define MHF2 1 /* Hostflag 2 index */ 1323#define MHF3 2 /* Hostflag 3 index */ 1324#define MHF4 3 /* Hostflag 4 index */ 1325#define MHF5 4 /* Hostflag 5 index */ 1326 1327/* Flags in M_HOST_FLAGS */ 1328/* Enable ucode antenna diversity help */ 1329#define MHF1_ANTDIV 0x0001 1330/* Enable EDCF access control */ 1331#define MHF1_EDCF 0x0100 1332#define MHF1_IQSWAP_WAR 0x0200 1333/* Disable Slow clock request, for corerev < 11 */ 1334#define MHF1_FORCEFASTCLK 0x0400 1335 1336/* Flags in M_HOST_FLAGS2 */ 1337 1338/* Flush BCMC FIFO immediately */ 1339#define MHF2_TXBCMC_NOW 0x0040 1340/* Enable ucode/hw power control */ 1341#define MHF2_HWPWRCTL 0x0080 1342#define MHF2_NPHY40MHZ_WAR 0x0800 1343 1344/* Flags in M_HOST_FLAGS3 */ 1345/* enabled mimo antenna selection */ 1346#define MHF3_ANTSEL_EN 0x0001 1347/* antenna selection mode: 0: 2x3, 1: 2x4 */ 1348#define MHF3_ANTSEL_MODE 0x0002 1349#define MHF3_RESERVED1 0x0004 1350#define MHF3_RESERVED2 0x0008 1351#define MHF3_NPHY_MLADV_WAR 0x0010 1352 1353/* Flags in M_HOST_FLAGS4 */ 1354/* force bphy Tx on core 0 (board level WAR) */ 1355#define MHF4_BPHY_TXCORE0 0x0080 1356/* for 4313A0 FEM boards */ 1357#define MHF4_EXTPA_ENABLE 0x4000 1358 1359/* Flags in M_HOST_FLAGS5 */ 1360#define MHF5_4313_GPIOCTRL 0x0001 1361#define MHF5_RESERVED1 0x0002 1362#define MHF5_RESERVED2 0x0004 1363/* Radio power setting for ucode */ 1364#define M_RADIO_PWR (0x32 * 2) 1365 1366/* phy noise recorded by ucode right after tx */ 1367#define M_PHY_NOISE (0x037 * 2) 1368#define PHY_NOISE_MASK 0x00ff 1369 1370/* 1371 * Receive Frame Data Header for 802.11b DCF-only frames 1372 * 1373 * RxFrameSize: Actual byte length of the frame data received 1374 * PAD: padding (not used) 1375 * PhyRxStatus_0: PhyRxStatus 15:0 1376 * PhyRxStatus_1: PhyRxStatus 31:16 1377 * PhyRxStatus_2: PhyRxStatus 47:32 1378 * PhyRxStatus_3: PhyRxStatus 63:48 1379 * PhyRxStatus_4: PhyRxStatus 79:64 1380 * PhyRxStatus_5: PhyRxStatus 95:80 1381 * RxStatus1: MAC Rx Status 1382 * RxStatus2: extended MAC Rx status 1383 * RxTSFTime: RxTSFTime time of first MAC symbol + M_PHY_PLCPRX_DLY 1384 * RxChan: gain code, channel radio code, and phy type 1385 */ 1386struct d11rxhdr_le { 1387 __le16 RxFrameSize; 1388 u16 PAD; 1389 __le16 PhyRxStatus_0; 1390 __le16 PhyRxStatus_1; 1391 __le16 PhyRxStatus_2; 1392 __le16 PhyRxStatus_3; 1393 __le16 PhyRxStatus_4; 1394 __le16 PhyRxStatus_5; 1395 __le16 RxStatus1; 1396 __le16 RxStatus2; 1397 __le16 RxTSFTime; 1398 __le16 RxChan; 1399} __packed; 1400 1401struct d11rxhdr { 1402 u16 RxFrameSize; 1403 u16 PAD; 1404 u16 PhyRxStatus_0; 1405 u16 PhyRxStatus_1; 1406 u16 PhyRxStatus_2; 1407 u16 PhyRxStatus_3; 1408 u16 PhyRxStatus_4; 1409 u16 PhyRxStatus_5; 1410 u16 RxStatus1; 1411 u16 RxStatus2; 1412 u16 RxTSFTime; 1413 u16 RxChan; 1414} __packed; 1415 1416/* PhyRxStatus_0: */ 1417/* NPHY only: CCK, OFDM, preN, N */ 1418#define PRXS0_FT_MASK 0x0003 1419/* NPHY only: clip count adjustment steps by AGC */ 1420#define PRXS0_CLIP_MASK 0x000C 1421#define PRXS0_CLIP_SHIFT 2 1422/* PHY received a frame with unsupported rate */ 1423#define PRXS0_UNSRATE 0x0010 1424/* GPHY: rx ant, NPHY: upper sideband */ 1425#define PRXS0_RXANT_UPSUBBAND 0x0020 1426/* CCK frame only: lost crs during cck frame reception */ 1427#define PRXS0_LCRS 0x0040 1428/* Short Preamble */ 1429#define PRXS0_SHORTH 0x0080 1430/* PLCP violation */ 1431#define PRXS0_PLCPFV 0x0100 1432/* PLCP header integrity check failed */ 1433#define PRXS0_PLCPHCF 0x0200 1434/* legacy PHY gain control */ 1435#define PRXS0_GAIN_CTL 0x4000 1436/* NPHY: Antennas used for received frame, bitmask */ 1437#define PRXS0_ANTSEL_MASK 0xF000 1438#define PRXS0_ANTSEL_SHIFT 0x12 1439 1440/* subfield PRXS0_FT_MASK */ 1441#define PRXS0_CCK 0x0000 1442/* valid only for G phy, use rxh->RxChan for A phy */ 1443#define PRXS0_OFDM 0x0001 1444#define PRXS0_PREN 0x0002 1445#define PRXS0_STDN 0x0003 1446 1447/* subfield PRXS0_ANTSEL_MASK */ 1448#define PRXS0_ANTSEL_0 0x0 /* antenna 0 is used */ 1449#define PRXS0_ANTSEL_1 0x2 /* antenna 1 is used */ 1450#define PRXS0_ANTSEL_2 0x4 /* antenna 2 is used */ 1451#define PRXS0_ANTSEL_3 0x8 /* antenna 3 is used */ 1452 1453/* PhyRxStatus_1: */ 1454#define PRXS1_JSSI_MASK 0x00FF 1455#define PRXS1_JSSI_SHIFT 0 1456#define PRXS1_SQ_MASK 0xFF00 1457#define PRXS1_SQ_SHIFT 8 1458 1459/* nphy PhyRxStatus_1: */ 1460#define PRXS1_nphy_PWR0_MASK 0x00FF 1461#define PRXS1_nphy_PWR1_MASK 0xFF00 1462 1463/* HTPHY Rx Status defines */ 1464/* htphy PhyRxStatus_0: those bit are overlapped with PhyRxStatus_0 */ 1465#define PRXS0_BAND 0x0400 /* 0 = 2.4G, 1 = 5G */ 1466#define PRXS0_RSVD 0x0800 /* reserved; set to 0 */ 1467#define PRXS0_UNUSED 0xF000 /* unused and not defined; set to 0 */ 1468 1469/* htphy PhyRxStatus_1: */ 1470/* core enables for {3..0}, 0=disabled, 1=enabled */ 1471#define PRXS1_HTPHY_CORE_MASK 0x000F 1472/* antenna configuration */ 1473#define PRXS1_HTPHY_ANTCFG_MASK 0x00F0 1474/* Mixmode PLCP Length low byte mask */ 1475#define PRXS1_HTPHY_MMPLCPLenL_MASK 0xFF00 1476 1477/* htphy PhyRxStatus_2: */ 1478/* Mixmode PLCP Length high byte maskw */ 1479#define PRXS2_HTPHY_MMPLCPLenH_MASK 0x000F 1480/* Mixmode PLCP rate mask */ 1481#define PRXS2_HTPHY_MMPLCH_RATE_MASK 0x00F0 1482/* Rx power on core 0 */ 1483#define PRXS2_HTPHY_RXPWR_ANT0 0xFF00 1484 1485/* htphy PhyRxStatus_3: */ 1486/* Rx power on core 1 */ 1487#define PRXS3_HTPHY_RXPWR_ANT1 0x00FF 1488/* Rx power on core 2 */ 1489#define PRXS3_HTPHY_RXPWR_ANT2 0xFF00 1490 1491/* htphy PhyRxStatus_4: */ 1492/* Rx power on core 3 */ 1493#define PRXS4_HTPHY_RXPWR_ANT3 0x00FF 1494/* Coarse frequency offset */ 1495#define PRXS4_HTPHY_CFO 0xFF00 1496 1497/* htphy PhyRxStatus_5: */ 1498/* Fine frequency offset */ 1499#define PRXS5_HTPHY_FFO 0x00FF 1500/* Advance Retard */ 1501#define PRXS5_HTPHY_AR 0xFF00 1502 1503#define HTPHY_MMPLCPLen(rxs) \ 1504 ((((rxs)->PhyRxStatus_1 & PRXS1_HTPHY_MMPLCPLenL_MASK) >> 8) | \ 1505 (((rxs)->PhyRxStatus_2 & PRXS2_HTPHY_MMPLCPLenH_MASK) << 8)) 1506/* Get Rx power on core 0 */ 1507#define HTPHY_RXPWR_ANT0(rxs) \ 1508 ((((rxs)->PhyRxStatus_2) & PRXS2_HTPHY_RXPWR_ANT0) >> 8) 1509/* Get Rx power on core 1 */ 1510#define HTPHY_RXPWR_ANT1(rxs) \ 1511 (((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT1) 1512/* Get Rx power on core 2 */ 1513#define HTPHY_RXPWR_ANT2(rxs) \ 1514 ((((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT2) >> 8) 1515 1516/* ucode RxStatus1: */ 1517#define RXS_BCNSENT 0x8000 1518#define RXS_SECKINDX_MASK 0x07e0 1519#define RXS_SECKINDX_SHIFT 5 1520#define RXS_DECERR (1 << 4) 1521#define RXS_DECATMPT (1 << 3) 1522/* PAD bytes to make IP data 4 bytes aligned */ 1523#define RXS_PBPRES (1 << 2) 1524#define RXS_RESPFRAMETX (1 << 1) 1525#define RXS_FCSERR (1 << 0) 1526 1527/* ucode RxStatus2: */ 1528#define RXS_AMSDU_MASK 1 1529#define RXS_AGGTYPE_MASK 0x6 1530#define RXS_AGGTYPE_SHIFT 1 1531#define RXS_PHYRXST_VALID (1 << 8) 1532#define RXS_RXANT_MASK 0x3 1533#define RXS_RXANT_SHIFT 12 1534 1535/* RxChan */ 1536#define RXS_CHAN_40 0x1000 1537#define RXS_CHAN_5G 0x0800 1538#define RXS_CHAN_ID_MASK 0x07f8 1539#define RXS_CHAN_ID_SHIFT 3 1540#define RXS_CHAN_PHYTYPE_MASK 0x0007 1541#define RXS_CHAN_PHYTYPE_SHIFT 0 1542 1543/* Index of attenuations used during ucode power control. */ 1544#define M_PWRIND_BLKS (0x184 * 2) 1545#define M_PWRIND_MAP0 (M_PWRIND_BLKS + 0x0) 1546#define M_PWRIND_MAP1 (M_PWRIND_BLKS + 0x2) 1547#define M_PWRIND_MAP2 (M_PWRIND_BLKS + 0x4) 1548#define M_PWRIND_MAP3 (M_PWRIND_BLKS + 0x6) 1549/* M_PWRIND_MAP(core) macro */ 1550#define M_PWRIND_MAP(core) (M_PWRIND_BLKS + ((core)<<1)) 1551 1552/* PSM SHM variable offsets */ 1553#define M_PSM_SOFT_REGS 0x0 1554#define M_BOM_REV_MAJOR (M_PSM_SOFT_REGS + 0x0) 1555#define M_BOM_REV_MINOR (M_PSM_SOFT_REGS + 0x2) 1556#define M_UCODE_DBGST (M_PSM_SOFT_REGS + 0x40) /* ucode debug status code */ 1557#define M_UCODE_MACSTAT (M_PSM_SOFT_REGS + 0xE0) /* macstat counters */ 1558 1559#define M_AGING_THRSH (0x3e * 2) /* max time waiting for medium before tx */ 1560#define M_MBURST_SIZE (0x40 * 2) /* max frames in a frameburst */ 1561#define M_MBURST_TXOP (0x41 * 2) /* max frameburst TXOP in unit of us */ 1562#define M_SYNTHPU_DLY (0x4a * 2) /* pre-wakeup for synthpu, default: 500 */ 1563#define M_PRETBTT (0x4b * 2) 1564 1565/* offset to the target txpwr */ 1566#define M_ALT_TXPWR_IDX (M_PSM_SOFT_REGS + (0x3b * 2)) 1567#define M_PHY_TX_FLT_PTR (M_PSM_SOFT_REGS + (0x3d * 2)) 1568#define M_CTS_DURATION (M_PSM_SOFT_REGS + (0x5c * 2)) 1569#define M_LP_RCCAL_OVR (M_PSM_SOFT_REGS + (0x6b * 2)) 1570 1571/* PKTENG Rx Stats Block */ 1572#define M_RXSTATS_BLK_PTR (M_PSM_SOFT_REGS + (0x65 * 2)) 1573 1574/* ucode debug status codes */ 1575/* not valid really */ 1576#define DBGST_INACTIVE 0 1577/* after zeroing SHM, before suspending at init */ 1578#define DBGST_INIT 1 1579/* "normal" state */ 1580#define DBGST_ACTIVE 2 1581/* suspended */ 1582#define DBGST_SUSPENDED 3 1583/* asleep (PS mode) */ 1584#define DBGST_ASLEEP 4 1585 1586/* Scratch Reg defs */ 1587enum _ePsmScratchPadRegDefinitions { 1588 S_RSV0 = 0, 1589 S_RSV1, 1590 S_RSV2, 1591 1592 /* offset 0x03: scratch registers for Dot11-contants */ 1593 S_DOT11_CWMIN, /* CW-minimum */ 1594 S_DOT11_CWMAX, /* CW-maximum */ 1595 S_DOT11_CWCUR, /* CW-current */ 1596 S_DOT11_SRC_LMT, /* short retry count limit */ 1597 S_DOT11_LRC_LMT, /* long retry count limit */ 1598 S_DOT11_DTIMCOUNT, /* DTIM-count */ 1599 1600 /* offset 0x09: Tx-side scratch registers */ 1601 S_SEQ_NUM, /* hardware sequence number reg */ 1602 S_SEQ_NUM_FRAG, /* seq num for frags (at the start of MSDU) */ 1603 S_FRMRETX_CNT, /* frame retx count */ 1604 S_SSRC, /* Station short retry count */ 1605 S_SLRC, /* Station long retry count */ 1606 S_EXP_RSP, /* Expected response frame */ 1607 S_OLD_BREM, /* Remaining backoff ctr */ 1608 S_OLD_CWWIN, /* saved-off CW-cur */ 1609 S_TXECTL, /* TXE-Ctl word constructed in scr-pad */ 1610 S_CTXTST, /* frm type-subtype as read from Tx-descr */ 1611 1612 /* offset 0x13: Rx-side scratch registers */ 1613 S_RXTST, /* Type and subtype in Rxframe */ 1614 1615 /* Global state register */ 1616 S_STREG, /* state storage actual bit maps below */ 1617 1618 S_TXPWR_SUM, /* Tx power control: accumulator */ 1619 S_TXPWR_ITER, /* Tx power control: iteration */ 1620 S_RX_FRMTYPE, /* Rate and PHY type for frames */ 1621 S_THIS_AGG, /* Size of this AGG (A-MSDU) */ 1622 1623 S_KEYINDX, 1624 S_RXFRMLEN, /* Receive MPDU length in bytes */ 1625 1626 /* offset 0x1B: Receive TSF time stored in SCR */ 1627 S_RXTSFTMRVAL_WD3, /* TSF value at the start of rx */ 1628 S_RXTSFTMRVAL_WD2, /* TSF value at the start of rx */ 1629 S_RXTSFTMRVAL_WD1, /* TSF value at the start of rx */ 1630 S_RXTSFTMRVAL_WD0, /* TSF value at the start of rx */ 1631 S_RXSSN, /* Received start seq number for A-MPDU BA */ 1632 S_RXQOSFLD, /* Rx-QoS field (if present) */ 1633 1634 /* offset 0x21: Scratch pad regs used in microcode as temp storage */ 1635 S_TMP0, /* stmp0 */ 1636 S_TMP1, /* stmp1 */ 1637 S_TMP2, /* stmp2 */ 1638 S_TMP3, /* stmp3 */ 1639 S_TMP4, /* stmp4 */ 1640 S_TMP5, /* stmp5 */ 1641 S_PRQPENALTY_CTR, /* Probe response queue penalty counter */ 1642 S_ANTCNT, /* unsuccessful attempts on current ant. */ 1643 S_SYMBOL, /* flag for possible symbol ctl frames */ 1644 S_RXTP, /* rx frame type */ 1645 S_STREG2, /* extra state storage */ 1646 S_STREG3, /* even more extra state storage */ 1647 S_STREG4, /* ... */ 1648 S_STREG5, /* remember to initialize it to zero */ 1649 1650 S_ADJPWR_IDX, 1651 S_CUR_PTR, /* Temp pointer for A-MPDU re-Tx SHM table */ 1652 S_REVID4, /* 0x33 */ 1653 S_INDX, /* 0x34 */ 1654 S_ADDR0, /* 0x35 */ 1655 S_ADDR1, /* 0x36 */ 1656 S_ADDR2, /* 0x37 */ 1657 S_ADDR3, /* 0x38 */ 1658 S_ADDR4, /* 0x39 */ 1659 S_ADDR5, /* 0x3A */ 1660 S_TMP6, /* 0x3B */ 1661 S_KEYINDX_BU, /* Backup for Key index */ 1662 S_MFGTEST_TMP0, /* Temp regs used for RX test calculations */ 1663 S_RXESN, /* Received end sequence number for A-MPDU BA */ 1664 S_STREG6, /* 0x3F */ 1665}; 1666 1667#define S_BEACON_INDX S_OLD_BREM 1668#define S_PRS_INDX S_OLD_CWWIN 1669#define S_PHYTYPE S_SSRC 1670#define S_PHYVER S_SLRC 1671 1672/* IHR SLOW_CTRL values */ 1673#define SLOW_CTRL_PDE (1 << 0) 1674#define SLOW_CTRL_FD (1 << 8) 1675 1676/* ucode mac statistic counters in shared memory */ 1677struct macstat { 1678 u16 txallfrm; /* 0x80 */ 1679 u16 txrtsfrm; /* 0x82 */ 1680 u16 txctsfrm; /* 0x84 */ 1681 u16 txackfrm; /* 0x86 */ 1682 u16 txdnlfrm; /* 0x88 */ 1683 u16 txbcnfrm; /* 0x8a */ 1684 u16 txfunfl[8]; /* 0x8c - 0x9b */ 1685 u16 txtplunfl; /* 0x9c */ 1686 u16 txphyerr; /* 0x9e */ 1687 u16 pktengrxducast; /* 0xa0 */ 1688 u16 pktengrxdmcast; /* 0xa2 */ 1689 u16 rxfrmtoolong; /* 0xa4 */ 1690 u16 rxfrmtooshrt; /* 0xa6 */ 1691 u16 rxinvmachdr; /* 0xa8 */ 1692 u16 rxbadfcs; /* 0xaa */ 1693 u16 rxbadplcp; /* 0xac */ 1694 u16 rxcrsglitch; /* 0xae */ 1695 u16 rxstrt; /* 0xb0 */ 1696 u16 rxdfrmucastmbss; /* 0xb2 */ 1697 u16 rxmfrmucastmbss; /* 0xb4 */ 1698 u16 rxcfrmucast; /* 0xb6 */ 1699 u16 rxrtsucast; /* 0xb8 */ 1700 u16 rxctsucast; /* 0xba */ 1701 u16 rxackucast; /* 0xbc */ 1702 u16 rxdfrmocast; /* 0xbe */ 1703 u16 rxmfrmocast; /* 0xc0 */ 1704 u16 rxcfrmocast; /* 0xc2 */ 1705 u16 rxrtsocast; /* 0xc4 */ 1706 u16 rxctsocast; /* 0xc6 */ 1707 u16 rxdfrmmcast; /* 0xc8 */ 1708 u16 rxmfrmmcast; /* 0xca */ 1709 u16 rxcfrmmcast; /* 0xcc */ 1710 u16 rxbeaconmbss; /* 0xce */ 1711 u16 rxdfrmucastobss; /* 0xd0 */ 1712 u16 rxbeaconobss; /* 0xd2 */ 1713 u16 rxrsptmout; /* 0xd4 */ 1714 u16 bcntxcancl; /* 0xd6 */ 1715 u16 PAD; 1716 u16 rxf0ovfl; /* 0xda */ 1717 u16 rxf1ovfl; /* 0xdc */ 1718 u16 rxf2ovfl; /* 0xde */ 1719 u16 txsfovfl; /* 0xe0 */ 1720 u16 pmqovfl; /* 0xe2 */ 1721 u16 rxcgprqfrm; /* 0xe4 */ 1722 u16 rxcgprsqovfl; /* 0xe6 */ 1723 u16 txcgprsfail; /* 0xe8 */ 1724 u16 txcgprssuc; /* 0xea */ 1725 u16 prs_timeout; /* 0xec */ 1726 u16 rxnack; 1727 u16 frmscons; 1728 u16 txnack; 1729 u16 txglitch_nack; 1730 u16 txburst; /* 0xf6 # tx bursts */ 1731 u16 bphy_rxcrsglitch; /* bphy rx crs glitch */ 1732 u16 phywatchdog; /* 0xfa # of phy watchdog events */ 1733 u16 PAD; 1734 u16 bphy_badplcp; /* bphy bad plcp */ 1735}; 1736 1737/* dot11 core-specific control flags */ 1738#define SICF_PCLKE 0x0004 /* PHY clock enable */ 1739#define SICF_PRST 0x0008 /* PHY reset */ 1740#define SICF_MPCLKE 0x0010 /* MAC PHY clockcontrol enable */ 1741#define SICF_FREF 0x0020 /* PLL FreqRefSelect */ 1742/* NOTE: the following bw bits only apply when the core is attached 1743 * to a NPHY 1744 */ 1745#define SICF_BWMASK 0x00c0 /* phy clock mask (b6 & b7) */ 1746#define SICF_BW40 0x0080 /* 40MHz BW (160MHz phyclk) */ 1747#define SICF_BW20 0x0040 /* 20MHz BW (80MHz phyclk) */ 1748#define SICF_BW10 0x0000 /* 10MHz BW (40MHz phyclk) */ 1749#define SICF_GMODE 0x2000 /* gmode enable */ 1750 1751/* dot11 core-specific status flags */ 1752#define SISF_2G_PHY 0x0001 /* 2.4G capable phy */ 1753#define SISF_5G_PHY 0x0002 /* 5G capable phy */ 1754#define SISF_FCLKA 0x0004 /* FastClkAvailable */ 1755#define SISF_DB_PHY 0x0008 /* Dualband phy */ 1756 1757/* === End of MAC reg, Beginning of PHY(b/a/g/n) reg === */ 1758/* radio and LPPHY regs are separated */ 1759 1760#define BPHY_REG_OFT_BASE 0x0 1761/* offsets for indirect access to bphy registers */ 1762#define BPHY_BB_CONFIG 0x01 1763#define BPHY_ADCBIAS 0x02 1764#define BPHY_ANACORE 0x03 1765#define BPHY_PHYCRSTH 0x06 1766#define BPHY_TEST 0x0a 1767#define BPHY_PA_TX_TO 0x10 1768#define BPHY_SYNTH_DC_TO 0x11 1769#define BPHY_PA_TX_TIME_UP 0x12 1770#define BPHY_RX_FLTR_TIME_UP 0x13 1771#define BPHY_TX_POWER_OVERRIDE 0x14 1772#define BPHY_RF_OVERRIDE 0x15 1773#define BPHY_RF_TR_LOOKUP1 0x16 1774#define BPHY_RF_TR_LOOKUP2 0x17 1775#define BPHY_COEFFS 0x18 1776#define BPHY_PLL_OUT 0x19 1777#define BPHY_REFRESH_MAIN 0x1a 1778#define BPHY_REFRESH_TO0 0x1b 1779#define BPHY_REFRESH_TO1 0x1c 1780#define BPHY_RSSI_TRESH 0x20 1781#define BPHY_IQ_TRESH_HH 0x21 1782#define BPHY_IQ_TRESH_H 0x22 1783#define BPHY_IQ_TRESH_L 0x23 1784#define BPHY_IQ_TRESH_LL 0x24 1785#define BPHY_GAIN 0x25 1786#define BPHY_LNA_GAIN_RANGE 0x26 1787#define BPHY_JSSI 0x27 1788#define BPHY_TSSI_CTL 0x28 1789#define BPHY_TSSI 0x29 1790#define BPHY_TR_LOSS_CTL 0x2a 1791#define BPHY_LO_LEAKAGE 0x2b 1792#define BPHY_LO_RSSI_ACC 0x2c 1793#define BPHY_LO_IQMAG_ACC 0x2d 1794#define BPHY_TX_DC_OFF1 0x2e 1795#define BPHY_TX_DC_OFF2 0x2f 1796#define BPHY_PEAK_CNT_THRESH 0x30 1797#define BPHY_FREQ_OFFSET 0x31 1798#define BPHY_DIVERSITY_CTL 0x32 1799#define BPHY_PEAK_ENERGY_LO 0x33 1800#define BPHY_PEAK_ENERGY_HI 0x34 1801#define BPHY_SYNC_CTL 0x35 1802#define BPHY_TX_PWR_CTRL 0x36 1803#define BPHY_TX_EST_PWR 0x37 1804#define BPHY_STEP 0x38 1805#define BPHY_WARMUP 0x39 1806#define BPHY_LMS_CFF_READ 0x3a 1807#define BPHY_LMS_COEFF_I 0x3b 1808#define BPHY_LMS_COEFF_Q 0x3c 1809#define BPHY_SIG_POW 0x3d 1810#define BPHY_RFDC_CANCEL_CTL 0x3e 1811#define BPHY_HDR_TYPE 0x40 1812#define BPHY_SFD_TO 0x41 1813#define BPHY_SFD_CTL 0x42 1814#define BPHY_DEBUG 0x43 1815#define BPHY_RX_DELAY_COMP 0x44 1816#define BPHY_CRS_DROP_TO 0x45 1817#define BPHY_SHORT_SFD_NZEROS 0x46 1818#define BPHY_DSSS_COEFF1 0x48 1819#define BPHY_DSSS_COEFF2 0x49 1820#define BPHY_CCK_COEFF1 0x4a 1821#define BPHY_CCK_COEFF2 0x4b 1822#define BPHY_TR_CORR 0x4c 1823#define BPHY_ANGLE_SCALE 0x4d 1824#define BPHY_TX_PWR_BASE_IDX 0x4e 1825#define BPHY_OPTIONAL_MODES2 0x4f 1826#define BPHY_CCK_LMS_STEP 0x50 1827#define BPHY_BYPASS 0x51 1828#define BPHY_CCK_DELAY_LONG 0x52 1829#define BPHY_CCK_DELAY_SHORT 0x53 1830#define BPHY_PPROC_CHAN_DELAY 0x54 1831#define BPHY_DDFS_ENABLE 0x58 1832#define BPHY_PHASE_SCALE 0x59 1833#define BPHY_FREQ_CONTROL 0x5a 1834#define BPHY_LNA_GAIN_RANGE_10 0x5b 1835#define BPHY_LNA_GAIN_RANGE_32 0x5c 1836#define BPHY_OPTIONAL_MODES 0x5d 1837#define BPHY_RX_STATUS2 0x5e 1838#define BPHY_RX_STATUS3 0x5f 1839#define BPHY_DAC_CONTROL 0x60 1840#define BPHY_ANA11G_FILT_CTRL 0x62 1841#define BPHY_REFRESH_CTRL 0x64 1842#define BPHY_RF_OVERRIDE2 0x65 1843#define BPHY_SPUR_CANCEL_CTRL 0x66 1844#define BPHY_FINE_DIGIGAIN_CTRL 0x67 1845#define BPHY_RSSI_LUT 0x88 1846#define BPHY_RSSI_LUT_END 0xa7 1847#define BPHY_TSSI_LUT 0xa8 1848#define BPHY_TSSI_LUT_END 0xc7 1849#define BPHY_TSSI2PWR_LUT 0x380 1850#define BPHY_TSSI2PWR_LUT_END 0x39f 1851#define BPHY_LOCOMP_LUT 0x3a0 1852#define BPHY_LOCOMP_LUT_END 0x3bf 1853#define BPHY_TXGAIN_LUT 0x3c0 1854#define BPHY_TXGAIN_LUT_END 0x3ff 1855 1856/* Bits in BB_CONFIG: */ 1857#define PHY_BBC_ANT_MASK 0x0180 1858#define PHY_BBC_ANT_SHIFT 7 1859#define BB_DARWIN 0x1000 1860#define BBCFG_RESETCCA 0x4000 1861#define BBCFG_RESETRX 0x8000 1862 1863/* Bits in phytest(0x0a): */ 1864#define TST_DDFS 0x2000 1865#define TST_TXFILT1 0x0800 1866#define TST_UNSCRAM 0x0400 1867#define TST_CARR_SUPP 0x0200 1868#define TST_DC_COMP_LOOP 0x0100 1869#define TST_LOOPBACK 0x0080 1870#define TST_TXFILT0 0x0040 1871#define TST_TXTEST_ENABLE 0x0020 1872#define TST_TXTEST_RATE 0x0018 1873#define TST_TXTEST_PHASE 0x0007 1874 1875/* phytest txTestRate values */ 1876#define TST_TXTEST_RATE_1MBPS 0 1877#define TST_TXTEST_RATE_2MBPS 1 1878#define TST_TXTEST_RATE_5_5MBPS 2 1879#define TST_TXTEST_RATE_11MBPS 3 1880#define TST_TXTEST_RATE_SHIFT 3 1881 1882#define SHM_BYT_CNT 0x2 /* IHR location */ 1883#define MAX_BYT_CNT 0x600 /* Maximum frame len */ 1884 1885struct d11cnt { 1886 u32 txfrag; 1887 u32 txmulti; 1888 u32 txfail; 1889 u32 txretry; 1890 u32 txretrie; 1891 u32 rxdup; 1892 u32 txrts; 1893 u32 txnocts; 1894 u32 txnoack; 1895 u32 rxfrag; 1896 u32 rxmulti; 1897 u32 rxcrc; 1898 u32 txfrmsnt; 1899 u32 rxundec; 1900}; 1901 1902#endif /* _BRCM_D11_H_ */